Car Vs. 44,000 PSI / 3000 BAR Pressure Washer

Car Vs. 44000 PSI / 3000 Bar Pressure washer! We will try spinning nozzle, point nozzle and special nozzle that feeds sand in to the water making machine even BETTER! Big thanks to Delete on taking part in this important project!
Delete is one of the leading environmental full-service providers in the Nordic countries. Delete offers specialist competence with purpose built solutions and professional equipment through three business segments: Industrial Cleaning Services, Demolition Services, and Recycling Services. www.delete.fi/
Delete company presentation video • Delete company present...
Link to previous pressure washer video • Frozen Lake Vs. 44,000...

[@Beyondthepress]

Big thanks to Delete for making these great videos possible! Delete company presentation video kzbin.info/www/bejne/hYuQhq2EnLdlqqs Link to previous pressure washer video kzbin.info/www/bejne/f6eWg5Vubb96r5o

[@matsv201]

What you should do is put out a large fire with it. I tested with a power washer.. and well.. its way better than most other ways. This machine would be epic

[@Beyondthepress]

@jon gamer I had the video unlisted for that time :D It takes about one hour to get fullhd version ready and I don't publish before that

[@ulfvonweimuller4433]

@@PeliKarhu600 Kenttätykin piippu on letkuun verrattuna kertaluokkaa suurempi halkaisijaltaan, joten saman suuruisen paineen aiheuttama voimakin on kertaluokkaa suurempi kenttätykin piipussa.

[@ulfvonweimuller4433]

@@PeliKarhu600 se tykin murkula tulee ulos reiästä, jonka pinta-ala on varmaan yli tuhatkertainen verrattuna tuon veden ulostuloreiän pinta-alaan. Joten samansuuruinen paine kohdistaa tykin murkulaan yli tuhat kertaa suuremman voiman.

[@Speeder84XL]

@@Beyondthepress That's good - it's quite annoying when you are early watching the video and it's just 360p. But, that machine was really impressive. Especially with the sand, it's really like a portable water cutter rather than pressure washer , haha

[@joeonejoeone]

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use kzbin.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.

[@DieselTjuv]

That's the last time I park there

[@gentle-j5028]

Why don't you want to clean your car ?

[@wiseone2333]

gentle -J clean of paint

[@UddinProductionz]

😂😂😂😂

[@imgertberg5344]

You guys are awesome and you videos are too.. but.. I would like to have subtitles in your video, I am deaf and would to know what you are saying.. Vote for CC, click like.

[@rudiausbuddeln3652]

Imgert Berg who cares

[@Hoch134]

Maybe send them a mail to their job offer mail account. That's really something a new crew member could do.

[@imnotusingthisanymore2300]

[Jumpscare]

[@miguel2ponto0]

@@rudiausbuddeln3652 shut up bitch

[@messiahcomplex1]

[Funny Sounds]

[@Duncan_Idaho_Potato]

Jesus christ, it's a WATER LASER. I bet this was a good day at work for those guys. "What are we doing today, boss? Cleaning concrete? Washing cargo containers?" "No. We're going to destroy a car on KZbin for shits and giggles."

[@-ROB-E-]

Thanks for washing and have a nice day 😂

[@brandonzanzig3200]

Hahaha. Solid pun, sir.

[@eformance]

When you absolutely, positively need to draw inappropriate pictures that cannot be easily removed...

[@jamesharding3459]

Oh, you should see some of the crater patterns at White Sands. The pilots knew exactly what they are doing and unless someone decides to fill in a few hundred big fucking craters, those penises aren't going anywhere.

[@glennkrieger]

These guys are gonna live to 100+ years old. All fun, no stress, lots of money, silly, laughing, driving in a permanent drift on the lake...it's what we all should strive for. Even if it's only now and then.

[@Taikamuna]

Now that's a lot of pressure

[@user-vr4fm6wg2l]

Bruh

[@netherbrickgamer]

Bruh

[@Jp-bg3fc]

Bruh

[@aliepicgamer]

Ok

[@Cobaltus]

Bruh

[@shaolinwisdom]

You guys are the advent of industrial geekery. So much fun.

[@juststeve5542]

I shall remember "Delete" if I ever lock my keys in the car.

[@danielgorzelniak3209]

Or if u lock them in a safe

[@WoodworkerDon]

Or if you accidentally drop them into some concrete you are pouring.

[@mishun]

<a href="#" class="seekto" data-time="75">1:15</a> "And the machine is really dangerous..." And may attack at any time!

[@BlackWolf42-]

So, we must de

[@maatassavaan4481]

I think we must deal with it

[@user-hv9gk5tc8z]

The best pronunciation of “delete” on KZbin!

[@BFE08STI]

"Delletee"

[@locouk]

8760 Deleat* It’s a translation thing..

[@niklaskoskinen123]

Yeah, it's literally just the Finnish pronunciation for it, letter by letter. So it's only reasonable the Finnish company name is pronounced like that.

[@thomashenden71]

8760 Finnish is a grammatically extremely complicated language, oddly enough related to hungarian, however on the other side, the letters are pronounced exactly as they are written, and the same everywhere. Which leads to funny results when they speak english. 😆 We Norwegians cannot understand finnish at all, however many finnish people can also speak swedish which we do understand, and they will then mostly understand us, if we speak slowly.

[@locouk]

BFE 08 WRXSTI The alternative option would be for us, Anni and Lauri’s audience to learn Finnish and them to do their shows in their native language. Sons of Explosions have scrapped their English speaking channel, which is a shame because they have some great content. Let’s not be so hasty being judgemental..

[@niklaskoskinen123]

"That lot of damages" :D.. Gotta admit, I chuckled a bit when Anni said that one..

[@Anniarvaja]

😀😀

[@roidroid]

"Whats up my fellow english speakers?" :) haha

[@PyroNinja713]

Lol, you just had to make the car's death painful after it managed to hide and wait out the explosion video.

[@olafminesaw2]

Of course, they needed to "deal with it"

[@Babarudra]

HAHAha the ad for this video was for a 2000psi power washer with a "powerful 14 amp motor"!

[@Beyondthepress]

There was plenty of those also on the previous video :D

[@markiangooley]

I got that one too, though not on the earlier video. What I really like thinking about is what people at the junkyard will think of the car...

[@roidroid]

I think mine was life insurance, which also seems relevant. What if i die in freak 3000bar sandblaster attack? These things can happen

[@georgegreen3130]

Lol got same ad how underwhelming

[@isaacmarte3520]

Holy sheet!

[@jamesbrown4092]

A long time ago, I watched a documentary on quarrying either marble or granite. They used a rig that had high pressure water come out of oscillating nozzle, which made a beautifully clean cut in the stone so that large slabs could be quickly quarried. The power of water is amazing.

[@RaExpIn]

Working in this company seems like a pretty cool job.

[@WoodworkerDon]

They are always under pressure to do a good job though. 😀

[@nemoaspieman369]

<a href="#" class="seekto" data-time="596">9:56</a> "Shot through the heart, and you're to blame, you give love a bad name"

[@TC-bz9dz]

thanks for making me laugh and smile....i needed that today....love y'all and your channel!!

[@christophpoll784]

Until I saw the seats I thought "maybe a good idea for firefighters to free a person from a crashed car" .... then after it was just "ok.. nevermind!"

[@jamesharding3459]

Saws are much safer and much more portable

[@eibenag]

It's wild how much the guy with the nozzle has to lean into it.

[@ATSaale]

Try a fire hose. When I learned aviation fire fighting in the Navy it actually took a team of 4 to effectively control the hose and nozzle, and we still had to lean in to it.

[@jordanstatler4661]

The lower pressure ones actually press harder because they use a greater volume of water where the higher pressure is less water volume but through a smaller opening. We do water blasting at my job and the 10,000 psi gun is actually the hardest to hold on to. Maybe not fire hose level but it will hold me up at a little over 200lbs. It will bruise up your shoulder like you were out shooting a shotgun all day, coincidentally they call those water guns shotguns as well...lol.

[@mduckernz]

Newton's 3rd yo! It's just a really inefficient rocket motor haha

[@painmagnet1]

I recognized the type of pump being used, called Hammelmann. We have them where I work on a robotic waterblast machine. I am sort of the Hammelmann specialist since the ones I rebuild seem to run the longest.

[@eastermister1]

It's great to see the two of you working so well together as a team you must have a great relationship

[@JanneRanta]

One new firefighting technology is high pressure water like this and sand in a nozzle that you push against steel / congrete wall. That will drill through it and then soak the room really fast. That way firefighters dont ever have to breach into the burning area so no danger of backdraft etc. I'm not sure if any Finnish fire departments have that thought.

[@anttiheikkinen3313]

Cobra cutting extinguishers have beeen in use in Finland for more than a decade and they're becoming more and more popular as the knowledge spreads. Cobra Cold Cut Systems Svenska AB invented the whole thing and the systems are made in Sweden. They launched their first commercially available ready-to-use system in 2000 so it's not that revolutionary.

[@JanneRanta]

@@anttiheikkinen3313 Cool. I just heard of it recently.

[@sebbes333]

@@anttiheikkinen3313 I heard something about that on the Swedish news around year 2000 - 2005 or something. But since then I havn't heard anything more about it, is it still used?

[@painmagnet1]

Genius!

[@anttiheikkinen3313]

​@@sebbes333 It is very much used all over the world and constantly increasing in popularity. Cobra themselves claim there's 750 systems operational in EU and Asia. The same system is licensed for US market and re-branded as PyroLance. That will give more search results. There's also a CNN article from Feb 2018 that says the US Air Force bought 193 of those systems for their own use (googl PyroLance CNN, as youtube doesn't take kindly to urls).

[@charley8699]

You two make this one of the most fun channels on youtube :}

[@vaporisedair4919]

That’s a very deep clean, about 30 cm or so!

[@ytwdh]

"Shot through the heart"... ...And you're to blame... :| Love your videos!

[@dribblstik]

As I said in the last video, that's BLOODY INSANE!!!! Love it!!

[@100SteveB]

I have used one of those to remove old paint and rust from a ships hull before, they are lethal things! It also happily stripped away several layers of non-slip 2 pack paint which was used on the outside decks of the ship. But they make one hell of a mess, and yes, i agree, they are bloody loud!

[@jordanstatler4661]

Especially the spinner tips!

[@markburckhard553]

Thanks for doing your videos in English, and by the way you both speak very good English!

[@MrBone1135]

thank you beyond the press very cool!

[@Ralesk]

Loving the music during the Delete scenes in this and the previous one :D

[@artursmihelsons415]

Environment friendly way to scrap old car.. Cutting everything and no need to swap tools.. Amazing, what water can do! :) With sand it is like natural erosion, but very quickly.. I think, this setup can cut even stone without problem.

[@_thenyounoticeyourethinking]

Video footage was pretty goddamn good! Extra content was also good!

[@mduckernz]

Gottdam guud! 😁

[@joegee2815]

EXTREME PRESSURE WASHING! Love it.

[@tonyblyad8011]

Love this channel

[@63256325N]

Thanks for the video.

[@TrojanHorse1959]

Great video Lauri & Anni, great pressure washer/cutter/carver, Delete!

[@thomashenden71]

Pressure washer 5 million? 😂😂😂

[@ShredCo]

Nice jacket.

[@simonedmunds8732]

A Fantastic machine. Good for cutting anything.

[@Jay-gx8dm]

I love the childish laughter when you guys are blowing donuts the ice. Reminds me when my dad used to do that with me as a kid and I couldn't control my laughter. Thanks for the smiles.

[@GiddeonFox]

Is there more information on the whole process they go through? I think how the risk analysis works, how they set up the site, suit up and operate the pump would make for a real fascinating follow-up video.

[@iangrinde8122]

I agree, it would be an interesting video, ala degree crimper

[@dandeson9723]

I'm really, really late but anyways, I can't film a video for you but I can give some general info on the topic if you want, I work at Delete atm.

[@AJ56]

Given how hard a 250hp engine goes in a car weighing 1.5+ tons, I have no doubt how hard it can push water through a pump. This thing is a weapon.

[@crandonborth]

Diesel Hp is different from Gas as the Torque is far higher. A Semi weighs 80,000 lbs is 500 HP… Ferrari sports car is easily 700 HP+

[@AJ56]

@@crandonborth no it isn’t, torque is torque. (Torque x revs) divided by a constant = power The truck is much heavier, very poor power to weight ratio, give it the same aero and power to weight and it’ll be as fast. Diesel makes more torque at lower revs that’s all.

[@theseaflower]

That is crazy.! Water is powerful💪

[@timomastosalo]

When you need something Deleted.

[@HumanisticJones]

<a href="#" class="seekto" data-time="595">9:55</a> "AND YOU'RE TO BLAME!"

[@WoodworkerDon]

"You give love a bad name." 🎵🎶🎵 Bon Jovi - 1986

[@kingofank]

while you had them there, should've just made the car into a convertible.

[@theintelligentgamer1817]

You guys are just the essence of Finland. Willing to tear up a car for funzies.

[@lordieshepherd]

That was awesome. You two are the cutest couple. Love this channel 🙂

[@matthewmckenzie541]

Nice!

[@Mywers]

I must say, the music is awesome!

[@JD-tl7ld]

Did anyone lick test anything, to be sure of quality control? My favorite channels on KZbin deal with crushing things in presses, and cutting things with waterjets.

[@DontarrestmePLZ]

Like how do we know that's a real car

[@cbomb60]

@@DontarrestmePLZ true, it probably tastes like a pretend one for all we know

[@DontarrestmePLZ]

AbsoluteBarstool I'm really glad this didn't result in a sick joke about Anni licking something because I was absolutely expecting that

[@JayTee95]

Yes! Great reference and great channel.

[@roebbiej]

you guys are awesome!

[@joker-hv4vk]

I guess the car has been deleted

[@WoodworkerDon]

And you can't Undo that Delete. 😀

[@retrochristmas7329]

Seems like a amazing way to strip paint. Screw paint remover and sand papper. Imagine make my self a LS pressure washer!

[@gtrulez]

Poor Sierra, those wagons are getting pretty rare these days. Not many still around.

[@2011metalmaniac]

people are buying them for spares to rebuild cosworths, and people will pay a LOT of money for them.

[@randyeller8139]

You know it's a great video when you two get to laugh that much through it! Can hear a talk with the insurance company: "What did you say happened to the car?" Lauri: " Uhm, I think a little water damage.." lol

[@stevegarmier563]

Extra content doing the funniest car/ truck donuts every. Doing them in a 4x4 is like riding the round up at the fair. Doing them on a ATV is even more fun lol.

[@IWantCustody]

Now this is epic

[@jeffberwick]

Great music while blasting the car!

[@marklarson8121]

Very fun and light hearted video I really enjoyed it! Have a good one guys see ya next time:D

[@alexisamtosta]

Excellent for washing ships!

[@remisoderberg]

Never been so clean

[@akseli2668]

3.47 looks like awesome burnout

[@waynep343]

here in southern california. after the 1994 earthquake.. they used that kind of high pressure machine to carve away the concrete from cracked usually parking structures leaving exposed rebar where the cracks were.. then they came back in with high strength cement to fill the gaps.. worked great..

[@roidroid]

Interesting. Normally with concrete they try to avoid sticking new wet concrete to already dry concrete, coz it doesnt stick as well as if it was all one big constant pour. But i guess its better than knocking down the building & starting over

[@WoodworkerDon]

@@roidroid they also wrapped large cylindrical concrete columns holding up bridges and freeway overpasses with steel sheets. They had actually started that project before the big quake happened. A number of large portions of freeway overpasses, that had not been upgraded yet with the steel encasements, failed and collapsed. Southern Calif. and particularly Los Angeles county have some of the strictest building codes, in large part due to the frequency and strength of earthquakes.

[@nitrosport5]

I need one of those!

[@joegee2815]

I used to go to empty parking lots after a fresh snow and do donuts like that. Free carnival ride.

[@tonysansom]

Anni's laugh! :-D

[@lordfeish1927]

shoutout to the waterjet channel its like a handheld one

[@Jaycastjay]

I never thought you would surpass blowing up the lake but wow!

[@bingbing-ti2rv]

Around 40 billions liters of water were wasted for this video. Joke, it was awesome like always dude !

[@offaloffadangoo]

Love you guys :)

[@jesslivhpy]

This is kick ass! This pressure washer vs. an old "Riot/SWAT" vehicle or some type of bomb shelter or safe would be super cool to see also.

[@mg42lover]

High pressure water with fine sand in it is how we cut thru slabs of granite to make beautiful granite kitchens and baths. Watching that slice thru stone like a hot knife thru butter is impressive to watch. Never gets old. I remember a long time ago learning how to use a water pressure cleaning system in Michigan. One idiot decided that all the safety briefings were stupid and one hour later blew a half inch hole through his palm. Took all but a hundredth of a second.

[@forthehorde86]

that is really cool to see! good idea for the channel!

[@stoffls]

In about a year, you can have my car, a 1999 Ford Galaxy. You just have to pick it up in Vienna ;-) And it really needs some serious cleaning

[@volvo09]

Portable water jet. Insane pressure!

[@boss_acg]

Nice vid!

[@mushroomsamba82]

Anni and Lauri are 2019's power (washing) couple

[@felixgutierrez993]

Dope for water fights!

[@Inuvialuq]

That is an insane pressure washer

[@BobDiaz123]

I think you've found the ideal solution for the jerks who cut you off or take 2 parking spaces in a crowded parking lot !!!! LOL

[@elcannibal1373]

Saludos desde México, son los mejores

[@johnrosehart8971]

That was *AWESOME!!!* I want to see *more!!!* 👍🏻🔫

[@Rankaisija867]

Put gasoline in that tank instead water. Huuuuge flamethrower 🔥

[@roidroid]

Hahaha what could possibly go wrong

[@painmagnet1]

That would be crazily stupid but fun to watch. I have no doubt the pump would explode from diesel theory combustion.

[@puckcat22679]

painmagnet1 it wouldn't ignite in the pump because there's no air. But maybe at the nozzle. Have an aerator of some sort that mixes air with the high pressure water?

[@puckcat22679]

Grimace427 right, this is an order of magnitude more, however. Plus, higher volume pump. I could see it igniting on its own at the outlet, unless the pressure drop is too quick.

[@KcTries]

Ebay listing: Old painted Volvo, many miles but still going strong. Minor right side passenger and rear door damages, slight interior ware, and right side mirror damaged.

[@formatique_arschloch]

Ford.

[@dagconst1]

This two crack me up !

[@yooooodennis]

I need this to clean my car!

[@pineappleflowers1773]

I need a pressure washer like this to clean the mud off my fourby!

[@EclecticEssentric]

Did that effect the trade-in value at all?

[@R1chardB1ngham]

I don't see why you had to destroy the Sierra when there are lots of crappy Hyundai's out there...

[@mohammadayub2760]

Omg raw power I want one for brick cleaning

[@DIRTYSANCHEZ1995]

I do a lot of waterblasting in the oil field. I’m 220-230 lbs and the high pressure guns have no problem holding my full weight when lying across it. If don’t right you’ll float above the ground. You can walk up walls if you’re handy enough.

[@michaelXXLF]

That'll buff out!

[@WoodworkerDon]

kid: "You can't fix this car Spicoli." Spicoli: "I can fix it." Fast Times at Ridgemont High - 1982

[@Eli_Texan]

Serious pressure I have worked as a water blaster for 6 years now

[@douro20]

"We delete your problems" The process is known as hydrodemolition.

[@3henry214]

When he started cutting into the front "A" pillars, I really thought he was going to go all around the car and cut all of the pillars and turn it into convertible! That would have stupidly funny.