Carbon Fiber Ducati Front Bracket Done Part 2 - Super Light Panigale Part 4

[@CP-zi3eg]

For the complexity of the mold and the logic of assembly an absolutely well engineered component !! Congrats

[@zrcarbon9937]

Thanks so much for the compliment 🛠️🤘

[@paolonieri473]

Piece of art.!!

[@zrcarbon9937]

Thanks so much! 🛠️🤘

[@JimPekarek]

This is the most complicated part I've seen someone make in CF, and the end result looks super professional. Nice work, I learned a lot!

[@zrcarbon9937]

Thanks so much for the compliment. I’m glad you’re enjoyed my video 🛠️🤘

[@chrstphrr]

Just a suggestion for the next round of molds, be it a revision to this, or your next complex bracket. When you're making your next revision of these molds, or your next multi-part mold for a complex part: Add in wax wedges (or waxed/release coated wedged shaped parts) on the back sides of seams of your mold where you want to fit your tools into. This will give you a starting point to separate the mold, where you can use a blunter tool with more leverage (plastic wedge, screwdriver, pry bar) to ease those first parts of the mold off. Love the progress, and thank you for showing the foibles and failures along with the successes!

[@zrcarbon9937]

Thanks so much for your compliment Thanks for the shout out on the mould. That will make me life easier for sure!🛠️🤘

[@AdamWarwicker]

I plan to do this to my own Ducati, so it's great to see your process! Thanks for the video's!

[@zrcarbon9937]

Definitely give it a go! I’m glad if I did help you with my video in your project 🛠️🤘

[@macolaiden]

you have very nicely made forms and it is a pleasure to put the carbon fiber there, the result is great and the reduction in weight by 400g is amazing

[@zrcarbon9937]

Thanks so much for the compliment 🛠️🤘

[@nguyenvinh7]

I love that there's no bs music, just straight up great ASMR content! Subbed!

[@zrcarbon9937]

Thanks so much 🛠️🤘

[@CarbonWorkshops]

That's impressive!

[@zrcarbon9937]

Thanks man! Your videos are awesome too! I’m wondering where about are you based? 🛠️🤘

[@CarbonWorkshops]

@@zrcarbon9937 UK 🇬🇧

[@zrcarbon9937]

I thought you’re in the UK. I’m in London 🤘

[@jeroen-surf]

Awesome! Well done!

[@zrcarbon9937]

Thanks man, I appreciate the compliment 🛠️🤘

[@schottlandreise1797]

Glad to see that it has now worked. Thanks for sharing, I'm thrilled with your work, keep up the good work. I'm looking forward to more projects.

[@zrcarbon9937]

Thanks so much for the compliment. Plenty more projects to come 🛠️🤘

[@superbikesquadracer]

Amazing work! Dream superbike Ducati 1199 r tricalore!

[@Runoratsu]

What a crazy complex shape! Very impressed how crisp and clean your result is.

[@zrcarbon9937]

Thanks so much for the compliment. Took me a huge amount of time to get this final result 🏍️🛠️🤘

[@adiprasongko1001]

I still have no idea about the manufacturing process, great job dude🔥🔥 I'm waiting for the next project

[@zrcarbon9937]

Thanks so much for the compliment! Will plenty more content coming out soon 🛠🤟

[@MRAW44]

Wow świetnie wyszło, czekam na więcej elementów 👍

[@zrcarbon9937]

Thanks so much. Will be more coming!🛠️🤘

[@bradr539]

Great job :)

[@zrcarbon9937]

Thanks so much

[@foulafaya]

amazing part :)

[@zrcarbon9937]

Thanks man 🛠️🤘

[@alejandrovalencia1083]

Excelente trabajo una obra maestra 👏

[@zrcarbon9937]

Thanks so much for the compliment 🛠️🤘

[@cristianbracci6039]

Wonderful job !

[@zrcarbon9937]

Thank you very much!

[@jeanfrancoispoivre4438]

Incroyable 😮

[@zrcarbon9937]

Thanks 🛠️🤘

[@cruisenTV]

That looks stunning and took a lot of well thought out planning. Now all you gotta do is make the piece in front of it carbon too 😂

[@zrcarbon9937]

Thanks 🙏 Unfortunately I had to sell my Ducati but I’ll be making prepreg videos of my Kawasaki. Will be super cool 🤙 🏍️🛠️🤘

[@cruisenTV]

@@zrcarbon9937 awe man! I like the zx6r too. Can’t wait to see the videos. The powder coat on the frame looks nice! I appreciate the videos. It’s definitely helped me a ton! Between your videos and easy composites, y’all have some of the best videos.

[@zrcarbon9937]

Thanks man I appreciate your words 🛠️🤘

[@Patrixluu]

fcking awsome , you're doing great works

[@zrcarbon9937]

Thanks so much! 🛠️🤘

[@giamademedoit]

It's really nice that you documented the failed attempt as well! Massive weight reduction! How did you calculate how much CF to add? I saw first video you used unidirectional pieces. Are you worried that the vibrations might cause issues with it? Ducati owner myself..

[@johnson1837]

keep the great vid

[@zrcarbon9937]

Thanks man! I will 🛠️🤘

[@raphaeljoubert7979]

Congratulations on this very complex work. You gain a new subscriber! Would it be possible to know the total gain after having installed all these carbon parts?

[@zrcarbon9937]

Hey Thanks so much for the compliment. I haven’t done much of the carbon jet but I would say roughly around 2-2.5 kg saved

[@fadlimuhamad7066]

This is cool,,,where can I buy this glue, I'm in Indonesia, can you help me, because in Indonesia there is no glue for this type yet

[@zrcarbon9937]

Hi Thanks Yes you can buy this type of adhesive. You should search as Methyl Methacrylate Adhesive or MMA adhesive. You should be able to find something about it in Indonesia 🤞 I hope this was helpful for you 🛠️🤘

[@snayke8503]

you always do a nice job, have u think to do a fuel tank? im thinking about to try in my daytona with this metod

[@zrcarbon9937]

Hey Thanks for the compliment! Yes I was thinking of the full tank. Already started the mould making as well. That will be the most challenging so far for me. 🏍️🛠️🤘

[@snayke8503]

@@zrcarbon9937 if you want we can work togheder

[@jr3628]

nice work, your mold must have been what like 11 parts including all of the smaller side pieces and wing molds?

[@zrcarbon9937]

Thanks for the compliment. I’ve done a 16 piece mould. Took me a huge amount of time to build this project 🛠️🤘

[@TROdesigns]

Amazing bro! Looks factory quality. What were the before and after weights?

[@zrcarbon9937]

Thanks man🛠️🤘 The oem part was 700g and the carbon piece was 300g But you can see in the video as well near the end Thanks

[@TROdesigns]

@@zrcarbon9937 that's insane weight savings! I must've missed that...thanks for responding

[@chrisv-l3835]

Excellent job. Piece by piece you can convert your Panigale to an 1199 superleggera. Have you thought about producing these to sell?

[@zrcarbon9937]

Thanks so much! I thought about selling the parts, but the market is very crowded with Ducati carbon fibre parts. I’m more likely specialised in the rare parts. 🛠️🤘

[@danielmartelli480]

What paper tape did you use to make the shapes to cut out? I'm looking for a good one

[@zrcarbon9937]

Hey I used a good quality masking tape from 3M

[@danielmartelli480]

@@zrcarbon9937 thank you so much

[@yusabayrakoglu3824]

Sir, what is for unperforated flim ? Is it for prevent carbon fiber and vacuum bag sticking to each other ?

[@zrcarbon9937]

Hey More like the purpose of unperforated release film is to keep the resin inside the prepreg under negative pressure during the curing time. Thanks for watching 🛠️🤘

[@yusabayrakoglu3824]

@@zrcarbon9937 thanks sir, i understood the point.

[@marinexixgamer]

Hi, wich double komp. glue pistol use?

[@zrcarbon9937]

Hey I used mma adhesive. You can buy it from loctite or easy composites

[@marinexixgamer]

@@zrcarbon9937 Thanks

[@grzegorzboguslawski7470]

👌

[@حازمحازم-ن7خ]

مرحبا كيف اصنع فرن للعمل كما هو فرن عملك وماهي الموصفات شكرا

[@capitao2259]

You just made a $600 piece right there if u were to sell

[@arfansukeri8263]

Can sell more than 600 😅

[@ediroks]

What's cooking good looking? Lol

[@ОлегДёготь]

Афигеть,сколько вложено труда и времени в эту деталь. А когда смотришь ,кажется так легко ,а наделе далеко не так . Сам порой занимаюсь такими вещами и понимаю все нюансы .......

[@zrcarbon9937]

Thanks so much for the compliment 🛠️🤘