As a NDT inspector its a joy to listen to this inspector he really knows his stuff. Would love to see him do some rt
@bwb4449 Жыл бұрын
Currently working on my PT, UT, and MT Level I and II classroom certs. What would be the best position for me to apply for to get in with a company such as Team/Acuren?
@Sebastian-wr4ym6 ай бұрын
@@bwb4449 did you manage to get hired by team?
@christopherortega8006 жыл бұрын
Hey Bob if you needed that plate to crack you should have let me weld it for you.
@MadNitr06 жыл бұрын
thank you sooooo much for using a darker filter! being able to actually see the puddle on yalls vids is grate!
@eduardorosales19596 жыл бұрын
I did learnes a lot of very cool stuff. I’m not a welder and aside from one day go welding I use your educational videos to understand the work of others. Thank you very much.
@beachboardfan95446 жыл бұрын
Can the NDT guy make a channel, TheNDTguy channel!? Weld testing is just as interesting as welding itself! TheNDTguy is always talking about what sounds like some super cool equipment... would love to see it!
@codymoody17935 жыл бұрын
I am a NDT tech. We have some cool stuff we mess with. Electromagnets, ultrasound, liquid penetrant. I. Was a welder for over 10 years before becoming a NDT technician.
@brianlewis13723 жыл бұрын
Agreed! We need NDT guy to start a channel! Awesome video btw.
@ThatOne772 жыл бұрын
Depends on what you like. I think ndt is fascinating.
@lukepodmore78102 жыл бұрын
@@codymoody1793 cool 👍🏻 I’m taking the pcn level 2 mpi test in 3 weeks I’m a welder too after 13 years I’m ready for something new. Any advice? Good place to revise ? Books ect..
@bohaggin59136 жыл бұрын
Camera guy is awesome. The footage looks amazing.
@MrBucidart6 жыл бұрын
I learn something new every Monday and Friday about welding. Thanks Bob!
@mrgreenswelding28536 жыл бұрын
Fantastic job Bob!
@agustinhernandez60946 жыл бұрын
I like the new quality of the videos thanks bob
@EricWithTheBass6 жыл бұрын
The 60fps at the welding instances does the lot. It feels more like it does in reality :)
@sixstringslaya6 жыл бұрын
Been waiting for this one since the Instagram teaser! Good stuff, Bob.
@TheJmk4162236 жыл бұрын
Not sure if you changed cameras or something but everything looks good! keep up the good work and thanks for helping me further my welding knowledge!
@VinzofTay306 жыл бұрын
Thanks Bob, very educational.
@bobmoffatt41336 жыл бұрын
Tayvin Thompson Thank you.
@hodgepodgeenginerd12586 жыл бұрын
Thanks for another good video. Id be interested to see more videos on pulse mig of both stainless and mild steel if at all possible.
@ChristianHernandez-ji2jg6 жыл бұрын
Could you show us what cold wire on the root looks like on x ray ??
@v5u7sulh26 жыл бұрын
very cool video. This is the kind of stuff we'd almost never get to see outside of a school
@JamesChurchill36 жыл бұрын
Hi Bob. One question, how come adding a copper wire to the weld causes a crack, but the copper coating on MIG wire is OK? Is it just to do with the amount of copper included? Thanks, always appreciate your teachings.
@ExtremeBlastoise6 жыл бұрын
The coating is less than a micron thick, some bacteria are thicker than that. Its either a tiny amount of copper, or rust particles in your welds.
@zachr2075 жыл бұрын
At 19:40ish, or....just do the same process on the opposite side of the workpiece. Right? Or am I missing what he’s trying to accomplish here or something?
@summerc10363 жыл бұрын
You work that yoke all the way down the weld in a 45 or 90 degree angle in both directions. From top to bottom. I think that's what you're asking?
@aaronfaucett64426 жыл бұрын
Cool video! Thanks!
@AshutoshSingh-wb9yn4 жыл бұрын
This is great video.. can you let us know how to produce similar crack on stainless and Aluminium material?
@mohammedaadilkhan78316 жыл бұрын
I work in the petrochemical and lubricants industry and I see ndt inspectors doing Magnetic Particle Inspections on the welds of Vertical storage tanks. I see the magnetic particles are in powder form in this video, will this not fall off the vertical tanks when applied? apologies for the ignorance I am inexperienced. any guidance ?
@ILLMATIC22224 жыл бұрын
The powder is magnetic, meaning it while "stick" when the inspection equipment introduces a magnetic current into the welds of the storage tank.
@lukepodmore78102 жыл бұрын
There’s a 2 part spray variant that does the same trick
@maxprophet24016 жыл бұрын
Good stuff thanks Bob! and best failed weld!
@chilubamanduli93752 жыл бұрын
Awesome, really interesting stuff
@oprofessoredgard Жыл бұрын
Thank you!. :)
@gnarlock39274 жыл бұрын
NDT guy should get some sweet revenge and magnetize Bobs test plates muahah 🧲
@impactodelsurenterprise24403 жыл бұрын
Can a dye penetrant test reveal those cracks too?
@soheilazad6 жыл бұрын
Thanks, Bob, really good one
@jamesl50106 жыл бұрын
Thanks Bob! Learned alot
@ThatOne772 жыл бұрын
You can detect flaws nearing a half an inch???
@riggsandmurtaugh79385 жыл бұрын
Hey Bob can you run spray over copper coated subarc wire and it not crack
@Big-mike071262 жыл бұрын
thank you for the video
@osa12om5 жыл бұрын
What a great video !! Thank you so much I have learnt a lot
@Sue_Me_Too2 жыл бұрын
My Inspection and Testing teacher told me to watch this video.
@mrgreenswelding28536 жыл бұрын
What the difference in the nozzles?
@bobmoffatt41336 жыл бұрын
Mr. greens boat tanks and aluminium welding Spray nozzle is longer with a more recessed contact tip.
@mrgreenswelding28536 жыл бұрын
Bob Moffatt thanks Bob that helps a lot with my aluminium welding.
@idriwzrd6 жыл бұрын
Testing the testmen. I like it.
@jcnpresser4 жыл бұрын
Machine shops you this for checking cast iron cylinder heads, well used to. Now that everything is made out of aluminum,
@rlund36 жыл бұрын
Magnetic peace, knowing your weld is not going to fail and injure someone.
@LowellGreen636 жыл бұрын
Good morning Bob...
@bobmoffatt41336 жыл бұрын
Lowell Green Good morning Lowell
@Bryan-nh1xn6 жыл бұрын
In what type of situation do you have to take a hand written test in welding
@bobmoffatt41336 жыл бұрын
Bryan Bennington CWE/CWI or any other AWS test, endorsements, NOCTI, NCCER, Skills U.S.A. There are plenty.
@ThatOne772 жыл бұрын
Dang. I want to work with you guys!
@bluedemonweld6 жыл бұрын
next time have Camera Guy weld it and for sure will crack!
@Gears.and.Gadgets6 жыл бұрын
Nice video Bob. Interesting technology. Just a thought. Have you ever handed a student a piece of magnetized metal to weld? Might be fun.
@bobmoffatt41336 жыл бұрын
George W Not intentionally.
@4speed3pedals6 жыл бұрын
Quite the fashion statement, a Chinchilla headband.
@deaaqua866 жыл бұрын
Question for anyone with an answer: I briefly worked at a factory that had welders (I was not one, I know nothing about it, hence me being here 😊). One day while a guy was welding, he accidentally stuck something into his hand and it caused his hand to inflate like a balloon. It was at least double the size. It looked horrifying! I always wondered what exactly happened. What did he stick in his hand? I never got to ask. Thanks!
@Baldybiddle6 жыл бұрын
Sounds like maybe he was tig welding and he stuck himself with a piece of tungsten possibly, sometimes people can have so,e pretty bad reactions
@barry76084 жыл бұрын
Crater crack ?? Star crack
@gregoryk.98153 жыл бұрын
Totally destroy your cellphone in a milla second.
@champtree6 жыл бұрын
Hey "Camera Guy" give you 20 bucks to bend Bob's wire. If you can't beat him golf, then bend away!!
@JohnDoe-jn1ln6 жыл бұрын
Sitting up here playing games.
@turdfurg474 жыл бұрын
I tell yhou whhut bhobby wuaaaa
@JohnDoe-jn1ln6 жыл бұрын
Why are most of your welds in the vertical position? You say you have trouble doing overhead then thats the weld position you should be working on. A 4G.
@chrisgagnon46086 жыл бұрын
You are not "Testing the NDT guy" if you tell him ahead of time that you are setting him up. Clickbait.