5 to 10 years for an aluminium frame?????? What are you doing to it Rich, whacking it with a hammer every time you ride?
@1964Hall9 ай бұрын
Indeed, I'm still riding a 23yr old Aluminium Cannondale FS daily most weeks.
@reinholdachleitner20699 ай бұрын
@@1964HallSame here,my Merida Aluminum 6061TFS 300 is 12 years old 69 000km and still as solid as a house,Aluminium last a lifetime.💯👌🏻💪🏻
@reinholdachleitner20699 ай бұрын
Rich has almost zero technical knowledge about frame material and metallurgy,many of the GNC presenters are not educated about material science and metallurgy.😕
@gemshiddenhistories65759 ай бұрын
Not quite sure where he got that 5 to 10 years number. I still ride a 1985 Cannondale road bike and a 1995 Klein mountain bike, and there is no sign of fatigue or cracking on either frame.
@reinholdachleitner20699 ай бұрын
@@gemshiddenhistories6575 That's awesome to hear,they did a frame fatigue by German magazine Tour in 1997 and a Cannondale Caad3 was tested,they couldn't break the frame after 200.000 cycles of 1200 newton's force and 1300 newton's force respectively.Alumimium alloys are extremely durable and long lasting.
@WaechterDerNacht9 ай бұрын
Let's be honest: most people buy carbon bikes because they have the budget and because they look clean without weld lines. To justify the expense to themselves they talk themselves into believing they feel the difference despite spending too much time in their office chair and not enough on the bikes...
@zakkane28149 ай бұрын
THIS
@shaunschneeberger63019 ай бұрын
Lol i by no means rich but when they told me the biggest upgrade on a bike is carbon rims I didn’t believe them. Decided to try bontrager line elite and haven’t looked back biggest upgrade you can do and they will take anything you throw at them
@SimpleThinkingMind9 ай бұрын
There’s no doubt they’re good bikes but it’s the people man. Just because they have the budget they buy the most expensive bike setups and their skill level is not even there. My buddy and I ride hardtails and send it more than people with full suspensions. We always get comments like “dang you guys are doing this on rigids too”
@CANNABISfreedomNOtaxes9 ай бұрын
I think carbon frames look like f4t chicks. I would rather see nice welds and smaller tubing.
@zacharypump59109 ай бұрын
I'm 99% sure I can feel the difference between a 29lbs trail bike and a 34lbs trail bike... So no, it's not just the clean look
@Shralps9 ай бұрын
Had a quick search. This is the 7th Carbon vs Aluminium video GMBN has done.
@saucebands44609 ай бұрын
😆 I guess the question never gets old. Plus there's only so much you can say about a bike.
@chrisandrews58819 ай бұрын
Quantity > Quality
@ifitrollsrideit5306 ай бұрын
Not a single one of them with any real material science in. This is just a load of anecdotal woo woo. How about they try an measure how much a frame flexes compared to rims compared to tyres compared to suspension. That would put an end to all this "compliance" sales talk.
@kingofallworlds3 ай бұрын
And there will be more. Cf is still being improved upon as there are still weaknesses (particularly in side load durability) that surpass discussions about price
@Frorideism9 ай бұрын
The main difference, in fact, is that they are not the same material.
@CANNABISfreedomNOtaxes9 ай бұрын
Putting that Gen Y education to good use. Glad you put yourself $250,000 on debt for that.
@Frorideism9 ай бұрын
@@CANNABISfreedomNOtaxes Haha maybe chill on the keefer my friend and you'll recognize sarcasm a bit easier. 😘
@CANNABISfreedomNOtaxes9 ай бұрын
Its ironic when people have to point out that they're being sarcastic while blatantly ignoring the sarcasm in my replies.
@hc38205 ай бұрын
@@CANNABISfreedomNOtaxesGet off the drugs
@CANNABISfreedomNOtaxes5 ай бұрын
@@hc3820 I hope you're following your court order to stay 1000 feet away from schools and playgrounds
@peterdewey33959 ай бұрын
I would rather have an aluminium frame with top end components and also save myself a few hundred pounds which can go back into suspension service and riding kit.
@gmbn9 ай бұрын
That's a good way of looking at it!
@wirtzling9 ай бұрын
I think I am in this boat. I was fortunate to have sold a business this year and carved out a decent amount to get myself and my wife new ebikes. I debated this for months leading up to the purchase. I am a bit old school, been riding for decades and maybe I just still don't trust carbon. I ended up with 2 Lapierre overvolts, Because they are alloy. In the end I just know too many people who have broken carbon frames. I only know of a few rare cases where the same has happened to people I know with alloy. I will say though that some of the decision probably was influenced by the specs. My wife got a lower spec bike Overvolt trail edition 5.6. I went with the overvolt AM 8.7. The prices right now in the market are insane for deals. The spec of this bike in a carbon frame half a year ago would have been 3-4 thousand euros more. In fact even this exact bike should have been 2k more. We always buy our new gear in the off season but this year. WOW
@letsgoletsgoletsgoletsgoletsgo9 ай бұрын
I've ridden steel hardtails for the first 7 years of my MTB journey , this is my 8th year and i came into a bit of money and got myself a brand new santa cruz nomad, can't say i can feel the carbon since its all suspension , but i love it .
@markgeorge69079 ай бұрын
I don't know what aluminium these guys are riding but being a mechanic for over 30 yrs I've seen aluminium bikes last as much as 20years and carbon crack in less than 5. True, carbon has gotten better but aluminium is tried, tested and proven.
@nramrez5 ай бұрын
AND aluminum has gotten better as well 😆
@benjy2889 ай бұрын
Only 5 to 10 years from an alloy frame? who told you that?
@MntRprznt9 ай бұрын
And 20 years for carbon... xD I think this vid mustve been sponsored xD
@ianiscaratti49249 ай бұрын
personaly i had stressfractures on alloy and steel frames but never on carbon frames
@reinholdachleitner20699 ай бұрын
GCN is sorly ignorant about metallurgy and material science but they think are the expert's in this field.😕
@code3xiv7 ай бұрын
The sponsor told them to lie.
@reinholdachleitner20697 ай бұрын
@@code3xiv Lie's,they're all lie's.😅
@CyberneticArgumentCreator9 ай бұрын
Wait - did you just say aluminum lasts as little as 5 years while carbon fiber lasts 20? Maybe in a garage, but attrition has eaten most of the carbon fiber bikes from less than 20 years ago and meanwhile half the bikes on the road today are aluminum ones from 12+ years ago.
@Srt3D01-db-019 ай бұрын
Ive seen carbon frames tear appart from small jumps / medium rock gardens ( all on youtube 😅) compared to aluminium lol
@bitumen839 ай бұрын
1:38 problem here is that a decent amount of bike companies dont make high spec alu models, but only high end carbon models. Basically they want you to buy top end models or expensive ones...
@BlackMan6149 ай бұрын
Trek... SMH
@ghostAFsky9 ай бұрын
So frustrating! There are just a couple of brands out there like Cotic that give more flexibility with builds. Maybe I'm wrong but I feel like companies would sell bikes like hot cakes if they stocked aluminum bikes with really solid suspension, good wheels, and mid-tier drivetrains (like SLX or even Deore/SLX mix).
@SoulBlazeNightmare9 ай бұрын
A lot of companies do have good spec Al bikes. Trek was mentioned before so take a look at Slash 8, nothing to upgrade but tires.@@ghostAFsky
@sportsantenutrition33789 ай бұрын
Totally agree with you. Except for Commencal it's hard to find a high end alu bike.
@Kcducttaper19 ай бұрын
What do you mean by "high end"? I think most all brands I'm aware of off the top of my head at least have aluminum models with at least Shimano SLX, if not XT component options and effectively the same shocks/forks (albeit maybe not the absolute top end Fox Factory or a fork with a GRIP 2 damper). The XT groupset is probably the most popular "workhorse" in the Shimano lineup. If you're going with higher end components like an XTR, you're only doing that for weight savings or status symbol. Many argue that the XTR is actually more fragile and finicky than the XT, so if you just want a reliable drivetrain to rip on, the XT may actually be better than the XTR. It doesn't make much sense to spend the extra $$$ on an ultra-light drivetrain without also saving a couple pounds off the frame.
@nickpethan30839 ай бұрын
My bikes have been slowly been going back to alloy. I don’t hold on to a bike for probably more than 5 years. Saves me money to sink upgrades into the bike, especially carbon wheels. I’ve seen no performance decreases when switching back to an alloy frame, but I did see an improvement when switching to carbon wheels
@ewxlt9 ай бұрын
I’ve only ever broken steel and aluminum frames. Have never broken a carbon frame (or wheel).
@bamf660320 күн бұрын
@@ewxlthow did you break steel frame? You would first need to break all your bones before steel frame breaks
@ewxlt20 күн бұрын
@@bamf6603Both slowly broke from pedaling stress at the chainstay.
@bamf660320 күн бұрын
@@ewxlt i still have an old steel frame 20 years old been driving it all the time , heavy and ugly bike, but the frame is still good only scratches
@outsidefootdab48789 ай бұрын
He is not clear on it. But he is talking about gradual stressing of the alloy over time. Micro tears that eventually fail. Carbon doesn't really get that because of the material properties but a very hard impact could get a sudden catastrophic fail.
@cbenson5139 ай бұрын
and if you ride somewhere rocky where lose rocks get kicked up at times hitting frame and if you ever go down you've got impact on rock, I'll take aluminum over carbon.
@Marinos841926 күн бұрын
Carbon suffers from delamination over time... 🤷♂️
@outsidefootdab487826 күн бұрын
@@Marinos8419 depends on many factors, such as the layup the type of carbon weave, resin and types of load or uses. Generally delamination happens under compression loads such as the ocean gate submersible implosion. For a poor quality carbon bike absolutely, but generally for your common brands and average rider who takes care of their bikes its very unlikely and usually backed by warranties as well.
@Blunt33bdx9 ай бұрын
This is just my humble opinion : If you can afford to have 2 mountain bikes -> One XC type of bike (full sus or hardtail) with carbon frame, so light and stiff - and the 2nd one more trail or enduro in aluminium, a bit heavier but with more flex (full sus or course). That's quite a budget but at least you can do racing with one and go in the alps with the other.
@almabatekert_villanykorte33879 ай бұрын
That doesn't seem to make any sense but sure. Gotta love xc,where apparently even your frame's material matters more than your skill
@Blunt33bdx9 ай бұрын
@@almabatekert_villanykorte3387 Hum I never said that... You can have an xc bike with aluminium and a trail bike with carbon... And yes the skills and the good shape of the rider is what's most important in the end.
@christjoeng8 ай бұрын
thats exactly the setup I am aiming for. I do have an xc aluminium HT that only ways 12,0kg and is pretty fast but a bit more fragile looking (slim tubing here and there to save weight). I am now looking for a full sus trail/all mountain type of bike with 150&140mm travel to go to the alps.
@almabatekert_villanykorte33878 ай бұрын
@@Blunt33bdx Makes sense,but I was in my yearly "haha xc bad" period,sorry
@deividas_kimontas9 ай бұрын
I love my Vitus Sommet in carbon! 🔥 Had it for 3years and not a single problem with the frame! It's such a playful bike, running it on 27.5 Assegai tyres! 🤘
@scotthamlinbmx9 ай бұрын
My shop has seen 3 of those for creased down tubes where it meets the head tube.
@maxferenc55449 ай бұрын
ok@@scotthamlinbmx
@GoncaloNunoCarrasco9 ай бұрын
I ride a hardtail canyon exceed cf 6 from 2018, for almost 3 years with alumínium DTSWISS rim's and i love it. 80% of the time is riden in gravel fire road's. But what it realy love it's the quick response of it. Its fantastic. Happy new year!!!
@vasipro7 ай бұрын
Exactly! Over my alu hardtail frame, the response is superior. The acceleration is superior. The confort is superior. If done right, carbon frames are amazing. For everyday use, I use alu frames. For racing, carbon ones.
@TheSamwhyte9 ай бұрын
I do most riding up Scottish mountains. Occasional (big) tumbles happen. Aluminium frames bend or dent and I can ride down - CF breaks and I’m lugging the thing home. AL all day.
@jimmyridesnz9 ай бұрын
Why doesn’t anyone mention that carbon fibre can also be repaired? I’ve personally seen a significant hole in the top tube of a Trek Slash (rock strike due to crash) be repaired with no trace from stock paint job. Bike continues to be ridden hard 18 months later with zero issues!
@fitnesshiker9 ай бұрын
I run a carbon frame, aluminum crank, and carbon wheels on a spring/summer/fall fatbike setup. In the winter I swap to aluminum wheels. This video is very informative as running full carbon on a single track doesn't allow alot of flex through the bumpy rough rocks and tree roots. However when I ride cross country on flat only, the bike ride is fast and amazing. I also notice the high engagement hubs changes the bike dynamics as well on both single track and cross country.
@gmbn9 ай бұрын
In XC most riders will use a full carbon set up as the stiffer ride helps with a more direct power transfer. Sounds like your set up works for you which is all that matters! 🤘
@ASOMAX9 ай бұрын
I am a newer rider who did buy into the carbon hype after compulsively obsessing over bikes n parts etc for my first 2 years. I ended up with a Pivot 429 (alloy wheels) purchased from a friend. The bike is great and the Pivot frames are top notch. They only produce carbon frames. That said I could have easily saved $1,000 and still ended up with a bike I’d probably enjoy just as much. Oh well..
@spdaltid9 ай бұрын
I've got two Carbon framed long travel bikes with alloy rims. My hardtail is Ti with full XTR.. But, now I'm retired, my next bike will be Alu - I just ride for fun and I think I can get better bang for my buck on an alloy bike with nice components.
@rethridermtb32629 ай бұрын
As a larger rider I used to think that carbon fiber mountain bikes weren't durable enough, so I didn't even consider it, but after cracking the frame (no crashes involved) multiple times, I switched to carbon fiber and haven't had a frame failure since. That was about 8 years ago.
@Durwood719 ай бұрын
How did you manage to crack multiple aluminum frames without crashing?
@Cassienope9 ай бұрын
@@Durwood71 aluminum seems to crack frequently. Chainstays are a very common failure. They fail at the welds.
@vr40429 ай бұрын
I'm 20 Stone and got my first carbon bike in 1997. A Trek Y11. I still have the bike. Though now it is a RIGID single speed! Currently the main bike is an Orbea Rise Carbon with Alloy wheels. Mostly because I had to save a buck somewhere LOL. Maybe because of my size, I don't find carbon too stiff. And it absorbs a lot of 'vibration'. Though, hydro alloy is very nice, and frame for frame negligibly heavier than carbon. But once you spec out a really nice bike, the weld lines on a lot of alloy bikes just don't look good and its worth it for that smooth carbon.
@Durwood719 ай бұрын
@@Cassienope You must really be abusing your frames if that's a common problem for you.
@Cassienope9 ай бұрын
@@Durwood71 there are two type of people in the MTB world. Those who break shit and those who don't.
@Damae1389 ай бұрын
Alloy full-sus / hardtail and roadbike in my garage. Have been riding loads of bikes (including carbon) and still enjoy the way alloy rides. Modern alloy frames also look quite nice and handle perfectly. The weight difference is minimal on my bikes compared to carbon counterparts so thats never been a thing for me
@ephraimki77839 ай бұрын
i am on a carbon frame (yt decoy) with aluminium wheels (crankbrothers synthesis). love it
@morbly9 ай бұрын
My carbon bike feels laterally stiffer than the last two aluminium bikes I've had. I think this feels better when climbing really technical stuff. It weighs about 29 lbs despite some 2.6 tires.
@gemshiddenhistories65759 ай бұрын
My first thought when Rich said aluminum frames last only 5-10 years was "He doesn't know what he's talking about." as I have two aluminum bikes from the 1980's and 1990's that are still going strong. But then I realized that the way Klein and Cannondale made frames back then is totally different than how they are made now. Then they took oversized tubes of 6061 aluminum and specially welded them into frames. Now with hydro-forming, the aluminum is stretched and thinned and shaped before welding, leading to some very thin walled sections, something the old aluminum frames didn't have. I can see how they would fatigue and possibly crack at those thin sections with only 5 to 10 years of riding.
@GoodwinGlassworks9 ай бұрын
I was riding in the 90s and people around me renamed Cannondale to "Crackendale", and I figured this was a common thing with the brand, so I avoided their bikes(plus they made silly things like the Lefty fork and other "why?" things). So it may be how you ride your bikes, your weight, etc. I've broken(or cracked, bent) every frame I've owned since beginning(could be within a month or a year, maybe two of ownership)....except for the Kona Hei Hei Ti frame---indestructible! And to be fair, I'm 6'4 and ride pretty rowdy putting a lot of stress on frames and components
@gemshiddenhistories65759 ай бұрын
My Cannondale is from 1985, when they were making the simpler frame design with 6061 aluminum tubing that was not custom shaped. And my Klein, from 1995 is one of the last made by Gary's folks before Trek took them over. Again, simpler 6061 aluminum tubing with little custom shaping. I'm probably a good deal lighter than you, at 5'11", and I do take particularly good care of my bikes. But I also ride them hard.
@GoodwinGlassworks9 ай бұрын
@@gemshiddenhistories6575 There are certainly occasions when you get "lucky". It's said that things made on Friday in a factory may not be as well built(with anything). I've owned two Jeep Cherokees...the second had all the high end stuff, and at 95,000 miles the thing became a liability to my life! So, I sold it! It seems people have a 50/50 affair with those vehicles(random example). As well, I've bought a LOT of the super high end bike components because I believed the cost equaled durability...and safety to my face and body. I've destroyed some of these parts in weeks. It may get warranteed and I have the new one that lasts much longer than the first one i bought
@Durwood719 ай бұрын
@@teamdoa Trek as well.
@simonm14479 ай бұрын
Today the frames are made slightly different, however the weight is not that different. A typical alloy hardtail frame still weighs around 2000 to 2200 g, it's just stiffer because the tubes are oversized, but thinner after the butted sections. However where did frames typically crack? It's mostly not in the middle of the tubes, but near the welds because the heat of the welding process can affect the metal. They also switched almost exclusively to the less brittle 6xxx alloys like 6061, while they often used 7005 in the past which has a slightly higher strength but is also more brittle than 6061. The advantage of 7005 was it don't need heat treatment after welding since a storage of 3 months does the same, while 6061 frames always needs a heat treatment. A frame today is designed with the help of software which can simulate the forces it has to withstand in real use.
@ertugrul7919 ай бұрын
i think gmbn loves a carbon frame alltough they know Al is better and are trying to convince us that cf is better
@DerKaktusAvant9 ай бұрын
You know what carbon is? A fashion statement. I still use my 10 year old YT Capra (fully aluminium apart from the upper section of the rear triangle), and guarantee I will still send it harder than all these other guys on their fancy carbon bikes. It’s like 1kg heavier than the carbon bikes, it doesn’t explode on its first drop, no stupid £500 29inch rims that fold on a slight bump, and it’s been with me round the world. Never getting a new bike unless it snaps.
@lisapet1609 ай бұрын
For most of us, especially in case of MTB, the difference is in price and frame longevity.
@ghostAFsky9 ай бұрын
More direct contact points like bars and potentially wheels make sense. Carbon frames are wayyy overrated for the average rider.
@Milessongs9 ай бұрын
That was a great mix of factors compared! With So many variables, including different rider preferences and perceptions, seems one might just really need to RIDE each and make their own decisions. Thanks Rich & Neil!
@symonhammond56239 ай бұрын
Please further explain why ally only lasts 5 - 10 years?
@AndreasRavnestad9 ай бұрын
Depends on the usage pattern, but aluminium will develop stress fractures over time. How much time depends on a large range of factors.
@symonhammond56239 ай бұрын
@AndreasRavnestad and carbon doesn't?
@AndreasRavnestad9 ай бұрын
@@symonhammond5623 There is a abundance of technical documentation of the mechanical properties of carbon fiber vs. aluminium, so I won't lecture you on that since you can look it up yourself. But to answer your argument (not mine) -- yes, carbon fiber can develop stress fractures. But it takes _a lot more stress_ to do so. And a major difference from aluminium is that carbon fiber composites can easily be repaired and reinforced.
@petrosspetrosgali9 ай бұрын
@@AndreasRavnestad let’s see what happens to that carbon frame when you lay it down on a small rock and develop a small area of delamination. The same impact on a metal frame would do zero damage.
@AndreasRavnestad9 ай бұрын
@@petrosspetrosgali Applying a force to a carbon frame that causes damage will at best dent the aluminium frame and at worst crack it badly. Carbon is much, much stronger than aluminium. The premise for your argument is simply false.
@Kcducttaper19 ай бұрын
I own an aluminum mountain bike and have ridden several carbon bikes, but I genuinely don't understand the "stiffness" and "compliant" argument. Do the tires and suspension not have 150mm (or whatever your travel is) of "compliance" already built in? I'm not saying that they don't have different compliance characteristics, but I don't understand how you could feel that small of a difference if you're already riding on a pillow. Seems a bit like the princess and the pea story. That said, I am scheduled to buy a carbon mountain bike to add to the stable tomorrow, but I'm not buying it because it's carbon. I'm buying it because it's a hecking good deal and is actually cheaper than my aluminum mountain bike was 8 years ago! I'd love to see a video where these vague terms are quantified somehow both on their own and including suspension, wheel, and tire flexj!
@hananas29 ай бұрын
let me add this: carbon is an environmental nightmare. We're in an environmental crisis, and carbon production is an insanely energy intensive process. To add to that, carbon is not recyclable either, you might've heard it is, but realistically it isn't. I choose neither material, #steelisreal and lasts forever if you take care of it. Feels fantastic too.
@pentonville23629 ай бұрын
I dont know which is worse, but aluminium refining and smelting also uses incredible amounts of energy and releases nasty greenhouse gases. As for steel, I’ve only broken two frames in my 35 years of riding and they were both steel.
@matthewaugsburger5369 ай бұрын
I have one full carbon bike(frame, rims, crank, bars) and one aluminum (Except l have carbon bars on it) both are 135mm/150mm bikes and yes you absolutely can tell a difference. The carbon is more precise and lighter, where you can feel the weight of the aluminum bike and it feels a bit more dull on the trial. Tire pressure changes are more noticeable on the carbon bike.
@Artoootube7 ай бұрын
Still have 2 x XC AL frames, one 20 the other 25 years old, not even oxidised from the inside, just renewed these bikes and they stayin! :)
@janbarrettnielsen25599 ай бұрын
Just bought a Specialized Chisel Comp aluminium hardtail (at a pretty nutty bargain price) and although some of the componentry is not top shelf, the frame is a thing of beaty - probably the lightest in the world of xc alloy frames - and with the most elegant slim tubing, making it almost as skinny as a steel bike. With new lighter wheels, cassette + other minor replacement parts (and even a 150mm dropper) its now lighter, more agile and a lot more appealing to the eye than most (if not all) spec-wise comparable midrange carbon hardtails with their more bulky frames. And price wise a LOT cheaper than a similar build would be if it was CF. So for a fun bike, this is a hoot. ❤
@rule30369 ай бұрын
I have a chisel ltd ed frame , cracking bike, climbs like a mountain goat, and smooth on everything else. Good choice👍
@theymademepickaname12489 ай бұрын
I also ride one. Installed a 110mm sid, 150mm dropper, and new wheels. It's perfect for the trails in my area where most people are overbiked.
@yourhomie29389 ай бұрын
dream frame for me that one. Especially the LTD version!
@Nahduge4 ай бұрын
I got the Epic Hardtail Comp on sale for the price of the Chisel so can't complain 😂
@ecopennylife9 ай бұрын
Just bought a Polygon Syncline C5 carbon hardtail, rides great, going to upgrade to tubeless tyres soon 🚴
@gmbn9 ай бұрын
Tubeless is great! What tyres are you going for?
@ecopennylife9 ай бұрын
@@gmbn Got a pair of Bontrager XR2 XC Style tyres, Trek had 30% off special over Xmas 🚴
@abtcup9 ай бұрын
If in a certain budget and all things being equal except for the frame…I’ll take the aluminum frame. With the savings…you can upgrade the stock wheels. Right now…with the market the was it is…you can get some crazy deals in bikes. You can get a carbon bike for the price of aluminum.
@Durwood719 ай бұрын
What's the difference between an aluminum mountain bike frame and a carbon mountain bike frame? About $2000.
@JimS8709 ай бұрын
Not a MTB, but in Canada, a aluminum Trek Domane AL5 is around 2650 dollars. And the SL5 carbon version is over 4500! Granted, the carbon one has slightly better tires, and iso speed dampening, but that's still almost two thousand dollars more.
@mychannelforfun55239 ай бұрын
Everytime I see Neil, I think of Remy Metailler. They look like brothers. When are you guys going to do a collaborating video with Remy?
@cbenson5139 ай бұрын
Big fan of saving money by getting alum model and immediately taking saved money to upgrade the suspension. Sell unused stock suspension to fund further upgrades (brakes, dropper, etc) and you can get close to top spec bike at MUCH less than the carbon version. Then, enjoy crushing on the trails. Note: I am endruro rider.
@rokbuda93919 ай бұрын
This exact question was bothering me for quite some time but unexpectedly I had the possibility to test it myself aka. the real difference that a carbon frame makes on a full suspension mtb. Long story short, I've bought a used 2020 Lapierre Zesty 4.0 AM and the day later I've noticed that due some issues Lapierre had decided to recall all bike from that period for frame swap. Before the new frame was actually available I've had the chance to run the bike for 7 months and believe me it wasn't collection dust in the basement. Swapped frame wasn't a Zesty anymore but a 2022 carbon Spicy team frame. All the other components remained the same and my verdict is there is NO noticeable difference for a non PRO rider. People tend to forget when jumping from a 2.5k alu bike to a 5k carbon bike it is not all about the frame but all the components make the carbon bike feel better. My advice, get an alu frame with geometry that suits you equipped with decent forks and shocks and save the extra money for upgrades when eventually parts need to be changed.
@aliasrandom92419 ай бұрын
if Aluminum frames fail after 5-10 years on bikes, should we be flying 30+ old planes?!
@mtpowder89749 ай бұрын
Im a big dude and developed cracks in my aluminum specialized stumpy in 5 places after 6 years. Ended up going carbon on my santa cruz and then again on a yeti. No issues.
@edmundhodgson25729 ай бұрын
Carbon for going up, aluminium for coming down. Unless you have a motor then aluminium all the way. Save the landfill space for crisp packets...
@Sixbillion19 ай бұрын
alot of my friends ride carbon and, theres always someones bike with a crack or a break. nobody ever has these problems with aluminum that ive heard so far. carbon wheels are definitely great, other than that, aluminum is fine for me. less hassle
@bigb74229 ай бұрын
I keep detailed records of my rides. Distance, time etc, and have fatigue broke a MTN and road aluminum frame after way fewer hours than is on my current carbon MTN frame
@alexhudson35749 ай бұрын
how does a carbon frame last 2-4 times as long as aluminium ? , i had a top fuel 9.9 ssl and the chainstay had to be replaced and the bearings had wore away the carbon , this bike had only done about 300 miles of riding , i rode my Raleigh grifter about 3000 miles and the only thing that was replaced were the tyres brake cables, saddle and grips and pedals
@paulreilly38519 ай бұрын
I love watching you guys, but your lifetime assessment of materials is backwards. How often do we all hear about cracked carbon frames vs aluminum. please elaborate on why you express that carbon lasts twenty years vs aluminum four years. Thanks for all of the awesome videos.
@simonrook57439 ай бұрын
My Whyte T130 carbon, like some other FS bikes, is carbon front triangle only (same with my son’s 2006 Scott Genius he had way back when) but still a useful weight saving (about 500g claimed on the Whyte although I think it’s a bit less genuinely). Definitely noticed the bike is a little harsher since I went to a carbon front wheel (all round a stiffer wheel anyway), but for most my riding it works out just fine, I just back the damping on the fork off a little more and while it’s not the same effect it mitigates it a bit.
@8888swatt9 ай бұрын
5 to 10 years life for an alu frame?! I'd be interested to hear how you arrived at that statement.
@richardbateman249 ай бұрын
Can you review steel?
@zwingler9 ай бұрын
Lets get real. The minute performance and weight difference for 1k$ upprice is something that we honestly do not need. Everyone is complaining about inflation bla bla but paying thousands extra for like 1kg of weight saving and those same people get a new bike every 2 year and are surprised why they arent able to safe up money for early retirement. Its all just bogus.
@MTBPerspective9 ай бұрын
Whenever this subject comes up, people talk like there have been no advances in aluminum (or steel/titanium) since carbon came out which is simply not true. I'd argue that on full suspension bikes that the tire selection makes a bigger difference for ride comfort, vibration, etc... than frame material.
@Kulaan9 ай бұрын
i can dent my aluminum frame. you can't "dent" a carbon frame. my aluminum frame has no shelf life, aluminum has no shelf like you try to say. a carbon frame does. Every flex in a carbon frame is stress or breaking the fibers. enless you cracking welds on a cheap aluminum frame. aluminum will always trump carbon in strength! I also weigh 200 lbs which exceeds a carbon frame .
@tamholt34949 ай бұрын
Does it not seem strange that bike makers force their Alu/Carbon frames into the same shapes?? You'd figure the carbon surface forms would be a bit different to use the largest sweeps and arcs but its just as angular and geometric as the Alu. Surely there's a compromise in doing that for the visual continuity between models.
@thegreatseprano99189 ай бұрын
Have a look at the focus jam 8 (carbon) and focus jam 6 (aluminium), I’ve got the 8 and my brother has the 6 and the difference in shape is actually quite extreme.
@tamholt34949 ай бұрын
That's pretty cool to know! I'll check them out@@thegreatseprano9918
@godstrashman9 ай бұрын
Thank god for it since it keeps alloy frame prices cheaper but damn if it isn't amazing how many people are not only riding plastic bikes but paying extra for the privilege
@michaelpetersen68549 ай бұрын
Hi guys can you please tell what jacket's you are wearing please thanks
@Wesmond9 ай бұрын
Dainese Bike HGC Shell LT Jacket
@phxnezze9 ай бұрын
Just sold my last carbon bike a few weeks ago riding only alloy bikes now, steel, ti and aluminum. For the loose chunk we ride, carbon just gets beat up, alloy just gets dented, no cracks.
@The.JZA.2 ай бұрын
Lots of people are commenting that alloy lasts forever. It is simply not true. Yeah you might know a guy who has a 25 year old alloy frame and yes it will not suddenly blow up after 10 years but alloy suffers from fatigue. This means that over time, with repeated loading and unloading, the alloy and welds slowly get weaker. So your frame might look fine to the naked eye but when you send it off that drop on your 15 year old frame, you might be playing dice with the devil. If you just cruise to the shop and back on flat roads then it will be fine but when you are MOUNTAIN BIKING with jumps, drops and lots of bumps, you want to trust your equipment. Also carbon got a bad reputation when it was a relatively new material because yeah, some frames failed and yes if you crash an ultra-light road bike the frame might crack but a trail or enduro frame is a heck of a lot stronger than a road bike or a carbon frame from 10 years ago. Modern carbon frames are just about bullet proof and any impact that would damage a carbon frame would also damage an alloy frame.
@vasipro7 ай бұрын
I moved from alu hardtail to carbon hardtail. A world of difference. Both are amazing. I use carbon for racing and alu for across country adventure. Carbon feels more responsive, accelerates better, better handling. Alu frame is rougher. Not as good acceleration. Compared to carbon frame, input force goes everywhere, not exactly where I need it, at the real wheel. I feel alu frame is more reliable if I fall, better for day to day use.
@Tr_Fast9 ай бұрын
def go with alloy if you value dependability
@traingp78 ай бұрын
2006 F800 Cannondale i had for just over 7 years and 35000 miles developed a crack around the bottom bracket. I got a free F3 2013 BB 30 frame from Cannondale and had it for 10 years and 40,000 miles "have a computer to verify miles" and it's still going. The Taiwan made frame is going longer than the USA made one I had.
@Kulaan9 ай бұрын
My 2013 trek fuel only weighs 28lbs with 1x and a dropper post. Cost me 1000$ usd 4 years ago used. I’ll stick with aluminum.. i also weigh 200lbs
@raulchavez65079 ай бұрын
Best comparison video between both materials that I’ve seen… keep those great videos coming!
@frits89869 ай бұрын
Buy alloy and with the money saved you can plan a sick biketrip abroad
@kennethcampbell72639 ай бұрын
I say this, I like the idea of CF sets, but as a long time non rider it is expensive but for the things I would do with it light with slight flex is a good thing, but I am not thinking a lot about recumbent tricycle, because I am starting to get on in years.
@reno52989 ай бұрын
I'm a recreational rider. For me, the benefits of carbon aren't worth the price. I'm fine with a few extra pounds of weight and, to be honest, I'm probably not good enough to notice any performance gains over aluminum.
@kermittf98969 ай бұрын
Hopefully this is food for thought and helps someone… Am 186cm (6”1’) tall, and 105kg (235lbs) ( 16.5 stone for the brits), my xc/trail bike is 4130 chromo, and my AM/Enduro/Park bike is aluminium. Both bikes run top spec parts, and top shelf aluminium wheelsets with 2.5 or 2.6 wide rubber. For someone my size, there’s no weight benefit or performance advantage in carbon anywhere. My 4130 steel frame, and the aluminium frames are bombproof, and my top shelf suspension, wheels, tyres, remove any harshness. I don’t worry about parts failure or frame damage, I can ride the bikes as hard as I wish; (and it’s only me that will break. 🤣) Also, most carbon frames won’t have warranty for someone my size. Oh? And as others in the thread have pointed out, Carbon can not be recycled, and will not biodegrade. In 50,000 years, there will still be piles of carbon frames and carbon bits, just sitting there. The aliens will land on our dead planet, and think, “Wtf happened here??” 🤣🤣🤣 Hope all that info helps someone. 😎🤘
@pmoormann9 ай бұрын
Aluminum frames show the hand craftsmanship while Carbon bikes show that it is plastic and fiber formed in a mold. I prefer seeing the welds and feeling flex.
@simonm14479 ай бұрын
@onehandwashestheotherthat's right, however an automated welding machine means consistent quality. There's no monday frame. Carbon layers are laid by hand, and you cannot even evaluate the workmanship afterwards since it's hidden inside.
@joeanon38889 ай бұрын
Carbon? Aluminum? **laughs in steel**
@michelenardo12219 ай бұрын
This is a great great video!
@tonyheymunkets9 ай бұрын
I'm more confused now I think I would just go with the aluminum and save the money
@kevinc34119 ай бұрын
That was amazing, better then disney could ever do .
@jxyxmad9 ай бұрын
Everyone i know who has a carbon frame has had to get a replacement because of breaks/cracks. Personally im sticking with aluminum, for now at least.
@3Bmtb9 ай бұрын
At full-suses, CF or AL is just a question of weight, budget and brand / design. Personally, CF or AL is even more a question of durability, reliability and noises / creeking than a question of riding feel. The matching contact points, bike fit, apropiate angles for the use as well as correctly adjusted and working suspension is much more significant for a compliant ride. And perfect geometry comes priceless, no matter the material.
@AndreasHafenscher9 ай бұрын
The clear winner here is obviously STEEL. 😂❤
@esmordt9 ай бұрын
5-10 years durability for an aluminium frame??? are you crazy? come on... Carbon is light and fancy, it's cool ...but more fragile. We all have often seen friends with cracks but to brake an aluminium one is another story. I myself still ride a 2008 aluminium stumpjumper every weekend. I've changed forks, suspension, brakes, broke one rim ...but the frame is ok.
@mtnmist19 ай бұрын
I'll buck the trend - not a big fan of aluminum but they've gotten better. As a non-racer, I focus on ride quality. I love my nice steel framed hardtail (better damping) for making blues, greens and longer days fun, and I'm fortunate enough to have an all mountain FS for more rowdy trails. I disagree on the durability of carbon in rocky areas; yes you can break any frame, but I cringe when I think of sliding / crashing a carbon bike through the rocks.
@bradsanders69549 ай бұрын
If crashing in the rocks happens much, the frame will be the least of a person's worries. Rocks break body parts really easy. Damping in a steel frame.................the amount would be so minute as to be a rumor. The amount of travel in any frame is really tiny. I do like my reynolds 853 gravel bike though, and my 1990 MASI rd bike.
@letsgoletsgoletsgoletsgoletsgo9 ай бұрын
@@bradsanders6954 scientifically you are absolutely right , but steel bikes just feels different from aluminium
@bradsanders69549 ай бұрын
@@letsgoletsgoletsgoletsgoletsgo Yeah, they do. Changing psi in tires feels even more different than the steel/aluminum difference. ...there's a lotta things that determine ride. Suspension is what really matters. A 2010 mt bike with full suspension, is pretty wonky compared to a 2023 full suspension bike.
@minniusmannius91659 ай бұрын
After years of riding on chromoly, then switched to aluminium, then on carbon. After a tew years on carbon, going back to chromoly. Nothing beats the natural dampening of chromoly for my style of riding personally.
@gmbn9 ай бұрын
If it works for you that's all that matters! Keep shredding 🤘
@johnnydangerously94268 ай бұрын
It’s kinda like a motorcycle frame . Alloy aluminum is stiffer and metal tube that has more flex . Personal preference 😎
@hanstubben9 ай бұрын
Carbon full sus frame (Niner RKT9RDO), aluminium wheelset (Stans ARCH MK3), top end suspension (Fox Factory ) midrange groupset (Sram GX), midrange brakes (Sram Guide R) All 2018 build and still no need for upgrades!
@bikedude0199 ай бұрын
You forgot one topic: manufacturers mark up/profit is much more on carbon frame. Majority of riders wont feel a difference between the two materials except on their budget and cosmetic finishing (no welding cords visible).
@Zenpedaler9 ай бұрын
The main reason I go aluminum is it’s durable and recyclable. . Unless I’m racing, recyclability is very important.
@IIISentorIII9 ай бұрын
"recyclability is very important" 🤣😂🤣 Just bugger off please, like you give a shit 🤣🤣🤣🤣
@stephenjamesolsen9 ай бұрын
Carbon is made of fiberglass while aluminum is made of steel.
@ivato469 ай бұрын
isnt aluminium much resistant than carbon? ive never seen an aluminium frame getting snapped in half ._.
@goatsplitter9 ай бұрын
I've seen multiple carbon failures on trail in other people's bikes and never a steel or aluminum. Not that it can't happen obvs but anecdotal experience and all steers me clear of carbon every time. I just like me some metal bikes i dunno, and the price is more palatable, too.
@jordanhillbeck55804 ай бұрын
Thinking about buying a carbon bike the orbea rise m-team or m10 just concerned about frame cracking ?
@manitolas9 ай бұрын
My alu is a 2016 scott scale hd and it looks ok, at least on surface, and many kms was at rough terrain,i suppose depends from circumstances 🤔
@toxicmale17449 ай бұрын
One is massively over-priced and breaks without warning, the other is much cheaper and seldom breaks.
@oronzocana11039 ай бұрын
Generally speaking, given a limited budget, for a recreational rider aluminum wins hands down, in that you can buy a lower spec alu version of the same bike and spend the money saved over carbon frame (plus extra) on significant upgrades, especially wheels and custom tuned high end fork and shock, much much better bang for your buck.
@warrenyoung1739 ай бұрын
Surely vertical compliance is totally dominated by tyre pressure and suspension setup? I can’t think of any good engineering reason for a full suspension frame to contribute to travel nor lateral flex.
@Keith-v8q8 ай бұрын
I'm having a dilemma with this concept: If you could get a new nukeproof at great price in alum vs carbon today, which would be be get given the company wount be around to honor a frame warranty?
@donsmith28339 ай бұрын
Carbon people constantly posting online about any scratch, etc "Does this look ok?"
@dpugh399 ай бұрын
Xc racing carbon definitely a must . If your just riding for fun with mates and just love being out and about and KOM are not your thing then id probaly go steel
@iannorris88919 ай бұрын
I bought a carbon framed bike sold as 1st time owner (had been a hire bike previous but sold on with a full guarantee). A year later a small mark on the rear of the bottom of the seat post turned out to be a compromise in the carbon. I got a replacement frame but had to pay a crash replacement fee (900€) so the guarantee meant little. From that experience I would only buy carbon new from a company that gives a genuinely long guarantee (Santa Cruz for ex). Carbon also loses 50% in its value on re-sale, however much it cost new (12k€ levo s-works = 6k€ 2nd hand) :-/ !
@maccodj9 ай бұрын
Sorry, but this video felt like: We noticed that the sales for carbon MTBs are falling, let's wash their heads a bit!| Carbon frame is NOT for MTB, unless you just casually ride it, once you crash it and smash it on a tree or some rocks it's gone, while the aluminum probably bends a bit or it can be welded! Carbon-NO!
@epicgamingchannel3188 ай бұрын
yeah that was the point of the video; to tell people what they think about the materials, of course it felt like that
@YogevMontekyo9 ай бұрын
The only difference is weight of our wallet after buying a carbon frame and that's about it ! Most bike companies stopped making high spec aluminum bikes and they won't sell Aluminum frames for custom builds anymore. I'm currently riding both Carbon and Aluminum, i prefer the Aluminum since it is just as strong for average Enduro riding but difference for me is when time comes, Aluminum can be recycled.
@brendanbriody92689 ай бұрын
I think carbon is overrated on bikes. It's useful for wheelchairs , prosthetic limbs and in aerospace when dealing with weight problems. The recycling ratio of carbon is around 10% so you have an environmental problem with carbon. Until that is solved I'll stay with aluminium.