[CARBON WHEELS] BUILDING THE LIGHTEST STUNT BIKE | RokON VLOG #97

[@Max-hy9ud]

Some ideas for weight savings... Custom Carbon Body Panels, rear subframe in Carbon and stuff like the Front sproket housing and Heat Panels in Carbon. You can easily Lose a few Kilos with that.

[@hanfreeman]

I think anything that holds fluids would be pretty heavy. Helium in the tires too

[@wheelsonhills6461]

Hey you can replace nuts , bolts,screws and sprocket type of parts with titanium part it is 45% lighter then steel.

[@antoniocernat678]

And stronger

[@matias6727]

@@antoniocernat678 And it will become the most expensive stunt bike ever. But yes, titanium is nice.

[@tonirege7292]

Ko

[@-daigher-2549]

Why not ergal then? It isn't as strong as titanium but, if i'm not wrong ergal is way lighter (should be around 2.88g/cm³ for ergal and titanium is ~4.5g/cm3) Also ergal screws/bolts look, sick even tough, just like titanium, they are kinda pricey

[@replynotificationsdisabled]

Wouldn't say stronger, they both have their strengths.

[@arkama67]

Seeing you perform all those stunts with the bullet wheels really changed my perspective on them. I didn't know which one to choose from I thought they were weaker.

[@paul1e]

carbon looks weaker but it can withstand more stress than aluminium rims

[@Rageing7]

I just came across this and your comments at the end of your teat ride really made me smile, because in changing un sprung Weight the actual change to the feeling of the bike is a factor of 7 (from memory) which means that even though you only dropped 4 kilos of mass, the bike acts as if it's 28 kg lighter, and it's makes me so happy that someone realised the difference it makes to the ride rather than just going "my bike has sik wheels bruh" Love the video and I'm not sure on your rules your comp has but to shave weight I'd remove front fender entirely, headlight assembly entirely, probably shave the rear tail section, carbon bars normally saves about a kilo, if you can get them for a duke carbon brake calipers are a thing nowadays, and probably a carbon caliper holder as it would also be un sprung Weight and the riding difference again has that factor of 7. Really liked the video and your new staff member :)

[@biswajitroy9033]

Legends say it's impossible to get heart from rokbagoros

[@biswajitroy9033]

I got it wow love you brother from India

[@gtrr1016]

@@biswajitroy9033 maja bro

[@biswajitroy9033]

@@gtrr1016 🔥😎ya ya

[@tamilrock327]

Hi..Roy..how..are..you👍👍👍⚘⚘⚘

[@biswajitroy9033]

@@tamilrock327 chaccha londa hoon dost se challenge har ke dp badal diye zyada khush mat ho

[@DerSchweiz3r]

790 Power ✊🏻💨💨

[@richarddomingo5931]

Those parts are nuts!! You have all the high-end parts as possible.

[@miloszorz2054]

Lepo ,da mu je uspelo. Veliko trdega dela. RESPECT

[@amiresfandiari2470]

you guys are the best keep building new more cool and great projects and product for ktm models 😍😍

[@marshalljose1217]

Appreciation for the good video, more love towards KTM.. 😍😍😍😍

[@jzausatv2953]

Shheesss...nice bike man! Love it💪💪💪

[@san_j1307]

Best stunt rider in the planet. Rokon🤘🤘🤘🤘🤘

[@bijuthara8434]

I'm a big fan of ktm bikes . I'm also your fan . 😁

[@franksantarcangelo1950]

Almost forgot how much I love ur channel🔥👍🏻

[@vinaykoli2708]

BIG FAN ROCK BRO🤴🏻🤴🏻🤴🏻🤴🏻

[@singsonthadou7773]

You are indeed a super bike stunner

[@noomvulan2109]

carbon all the way! especially the chasis! keep on rokin'!

[@IvonaFlakus]

"Backswitch?! 6-7 years of filming and you call this a BACKSWITCH?!?!" - This had me in tears xD

[@tuanban516]

Ôi thật là đỉnh cao 💕💕

[@saven305]

SUPER VIDEO !!!!

[@richarddomingo5931]

20:38 you didn't pull the Clutch lever as you about to go. Some modifications?

[@gngstrlmao5031]

Thats his lefthandbrake not his clutchlever

[@nasimalipi2150]

Super duke bagros fan from BANGLADESH 🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩

[@shukshok7]

congrats on the new bike.

[@Lincolngarbuja03]

Big fan from Nepal

[@chickboom4537]

😍 from 🇮🇳🇮🇳🇮🇳🔥🔥🔥

[@sksthing6499]

Love from 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳

[@wilmercorrales1135]

This is amazing stunt,congratulation for the video ,greetings from Honduras..

[@visivoda2298]

Nice bike .... and nice fittings

[@300zxdriver]

That bike sounds awesome.

[@simonyap6426]

Awesome video Rok!!. Greetings from Malaysia :)

[@danielachopena91]

Me encanta todo tus vídeos saludos de Perú ♥️

[@tosh2012]

I saw someone planning a titanium. Trellis frame for a Ducati. Maybe they'll make one for the Duke? Carbon valve covers. Yamaha had some magnesium bar mounts once. I used to work at a titanium spring company. They saved alot of weight there, too (if you don't already have some) It was xalled Renton Coil Spring. They made for F1 teams as well as passenger and military airplanes.

[@madara-lp7xf]

I am from Nepal 🇳🇵 live in India 🇮🇳 Rock on

[@herrkelc]

Yu zastava 👍 Pozdrav iz Hrvatske

[@joviarya]

Awesome riding, what helmet is that or what is the style, looks so badass.

[@trwalker]

Wow amazing bike,so cool 😎 brother

[@SurajVerma-mh3mt]

I love your all stunts 💖🥰🥰🥰🥰🥰🥰💪💪💪🇮🇳and carbon wheels are op💪💪

[@villtoraaldurald1134]

Carbon ceramix rotors, carbon rear subframe and rear swingarm. Carbon panels. Carbon handlebars carbon rearseatcover, carbon footpegs, carbonfibre gearpedal/brake, carbonfibre brake and clutchlever, rear footpegmounts in carbon... And so on ;). Carbon fibre is pretty strong so you can basicly go as far as you want to. Even the main frame should be possible.

[@jeevantamang2940]

Love from Nepal 🇳🇵🇳🇵🇳🇵🇳🇵🇳🇵🇳🇵

[@wheelsonhills6461]

And congratulations in advance😅🥳🥳🥳🥳🥳🥳

[@patusko666]

Awesome wheels 😉

[@turplepower6614]

You could fill the tires with helium as well as the frame and swingarm and all other hollow Parts as long as there are tight first!

[@M_U_R_A_L_I]

hi bro u did a fantastic job what u done, I like a lot and i was expecting some more stunts from u go rock on...!!!!

[@martins4079]

Custom Carbon Frame :D

[@DanTube2010]

Carbon subframe could be doable.

[@christianseidler2252]

You might be able to shave of some weight by building the sub frame in forged Carbon fiber and change the swingarm for a machined aluminum one (take a look at the Bergos Racing Supermoto swingarm)

[@Calmdown189]

That is some high quality carbon fibre with lots of work to developed those wheels😀 legit yo

[@niriho6275]

Awesome bro..keep it up

[@DASZONE72]

Perfect 👍

[@SGVON885]

You are rock🤙👌💪

[@fzlsalim]

Beautiful wheels!

[@ivanhancock]

Slightly off topic, What is that jacket you are wearing when on the bike ? I love the look !!

[@cecilwilson5442]

Thanks for the video because the strength of the wheel will be fully tested by you in the stunt world will be the first one probably,, good to use titanium bolts,, carbon fibre parts for the body work,, I salute you for the choices you have made, 👍👍☘️☘️from Northern Ireland greatly appreciated, bike is. Best ktm on the Web

[@biyojuno5793]

Gokil emg, kuat juga yee carbon nya rotobox.

[@muhammedrahil6570]

Sickkk broo!!

[@crowmrf02]

SULTAN🤘🤘🤘

[@TheYamaha109]

Carbon swing arm and carbon bars! Also titanium hardware will help! Good luck I love this bike

[@alecerejo]

try to change plastics using vacuum molded ABS (like RC Car Body). You can paint them from the inside or keep it tranparent.

[@merajulislam4610]

love you bro from bangladesh.

[@asadullahrafi3135]

me tooo

[@flangmasterj]

Rok have you seen the 950SMR Max Hazan built? Now that thing is what dreams are made of.

[@fathanrizkyramadha1003]

Amaziiinh

[@daw1dh313]

Wow !!! 🔥🔥🔥💯💯💯

[@Noastrenght]

Still 178kg, wow. Truth to be told I did not know what you already did to the bike in terms of lightening it but I expected it to be a lot lighter.

[@preet_wild7840]

That was so smooth❤❤❤❤❤❤❤❤❤

[@nilsbreuer7296]

Finaly an smc r😍

[@sushantpradhan1903]

😍😍😍 sir big fan ❤❤❤❤❤❤❤❤ Love from nepal ❤😯🇳🇵🇳🇵🇳🇵🇳🇵

[@raj8041]

Hey you can replace your aluminium swing arm by forged carbon fibre swing arm. Or even you can put new carbon fibre frame.

[@fritzflips4585]

No exhaust, no seat, plastic tank... that’ll save some weight😂

[@heheboi6693]

Just frame 🤣🤣

[@tanatnguyen3920]

And no engine ??

[@bhuvanamharshitha598]

Super sir just rok

[@premterangamk]

I love your performance.

[@Karan-jy5vy]

That 790 with fully black covered headlight looks devil . From Nepal.

[@sksthing6499]

Damn waiting for the wrenching

[@BJSVLOG]

Love from Jorhat Assam India

[@nickbhai8560]

Me also frm assam bro.... Big fan rockon bhai

[@mlj7871]

Love from India 🇮🇳

[@alipim3504]

Parabéns sou do Brasil parabéns pelo trabalho

[@tamilrock327]

Super...wheel...👍👍

[@n8n8n8n]

KTM's lights looks like #DESTROID logo :D I LOVE IT!

[@pavlevujcic5874]

Carbon frame ❤

[@daybreakat0600]

What's your boot (full black, 15:43)? Is that the motorcycle boot?

[@shubhamdesai3023]

Hey rok, how many times in a year do you change those front forks ? As your stoppies are so cooool !

[@RokBagorosStuntrider]

Never, only we need to service them once per year ;)

[@300zxdriver]

The packaging is really nice.

[@geraldperry7779]

ROK, the 2020 KTM 1290 SDR has that exotic material under the passenger,KTM say it stromg enough for 1000KG. Why are they not using this composite material for the frame? Imagine the weight lost.

[@spartak-moscow]

What did u do to the gas tank? I love 790 in all aspects but the fuel tank. I personally think it's ugly as hell are there any options as to cover or change it? Appreciate your answer!

[@kalongkasep]

I saw you when you perform in Indonesia

[@aightthen6816]

Veryyy niceeee

[@dxwaibasir3181]

Love from 🇳🇵 ❤️ ❤️ ❤️

[@kaitobe585]

coming from mtb. try to find someone to make you air-suspension. saves heaps of weight compared to steel coils. carbonfiber, magnesium and titatium in every possible part =) there is a reason modern "stock" bicycles can be more expensive than decent motorcycle

[@monk3yman1997]

I dont think air spring forks would work on a motobike for the same reason alot of down hill forks use steal springs

[@michael9515]

Eni smo tuki tudi ki te spremljamo se iz skuter scene ;) OG bi rekel :D

[@spacehippie315]

All those nice parts just to break them during a fall 👌

[@imranhafizabbasi5108]

Love you....love from India

[@shivaverma-pg2go]

Carbon fiber frame All plastic panels to carbon fibre Engine casing and clutch cover to titanium As many engine internals to titanium as possible All the bolts to titanium All the stunt parts(foot pegs etc.) and brake and clutch lever to titanium or carbon fiber And lastly..a titanium handlebar The bike will easily tip around 150 kilos. Reference: ducati superleggera

[@kevindelgado7083]

Oh, I didn’t know Rok was a millionaire...

[@rideroll9609]

You want a lightest stunt bike? Carbon frame, forks, engine head cover, clutch cover, rear arm, handlebars, seat construction, gas tank

[@LeonBold]

swap your original battery for a lithium, saves you 2kg. Super-B lithium batteries.

[@Karan-jy5vy]

And what about your world record of stunting at the highest peak in Nepal .

[@Bruce_bianchi]

I’m actually curious to see. How carbon wheels hold up to the abuse of wheelies and what not! It’s my single fear with them

[@Youtube_Globetrotter]

I have heard the carbon is alot stronger so it should not be a problem at all. Christian Von Koenigsegg build a whole car in carbon, I think he knows what he is talking about.

[@jobosbaeten]

@@KZbin_Globetrotter But the force a Koeningsegg undergoes is different than smacking a wheel down repeatedly. So it's still going to be interesting to see how it holds up

[@Youtube_Globetrotter]

@Bernd DasBrot "Stronger than what" Whas are rims usually made of? Aluminium ofc "A monocoque for a car doesn't need to be impact proof." You don't think they test? They do for sure. Christian told to destroyed many of the Regera in saftey test. I don't think It would be road legel if they didn't

[@Youtube_Globetrotter]

@@jobosbaeten True, but what force do you think you can achive in a trick? And how mutch force do you think a Koenigsegg make with 1700 bhp

[@Youtube_Globetrotter]

@@jobosbaeten Ther is a reason why carbon is better than plastic for helmets, all carbon absorb the hit not only the contact zone

[@xantoshadhikari]

Slowly You’ll Be The Lightest StuntRider In The Universe!😁

[@Pillokun]

If I was you then I would try to make the rear cowl look like the Concept bike with the underslung exhaust. That would look epic as hell for an stunt bike. I mean you dont need to ride it on public roads or anything so everything is possible :P

[@chrisdrizos2403]

The 790 is lit but I would like to see more of the Razant

[@allroundkash3167]

Can we see u some time on kawsakie....who is agrie....?

[@mrpatricksipai9197]

love from NEPAL.

[@bhagats1ngh]

you should do things like this domino trick more often.

[@randypangalila5523]

Amazing