Рет қаралды 70
An unedited video from the Mobius camera on-board my Carbon-Z Splendor. I did nothing special during this flight, as it was the first time I'd attached the camera and testing out the handling of the plane. Other than a couple of rolls near the beginning, all you see is me flying the circuit. The Mobius is attached directly to the top of the clear plastic canopy, about an inch in front of the pilot's head-rest (I had already removed the plastic pilot). I attached the camera with some industrial strength Velcro. As luck would have it, this was almost the perfect position as it barely affected the center of gravity -- it made it a tiny bit nose heavy, but still did not require any trimming on the transmitter. It also pointed in that sweet spot... not too high, not too low. Now, if only this camera did not have a rolling shutter, then the prop would look like a spinning disk, instead of several blades cutting through the frame!