THIS NITRO IS A BLAST !

The Losi® 8IGHT-T Nitro Truggy RTR in my opinion is a great durable starting platform for Nitro Truggies. Hope you enjoy the vid :)
In Losi's words: "If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ SLT radio system can provide. You also get the benefit of a pre-set suspension that has the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available."
STOCK FEATURES:
Spektrum SLT 3-Channel SLT Radio System
Spektrum SLR300 Surface Receiver
Spektrum™ S614 Waterproof Metal Gear Surface Servo, 23T
4mm 6061-T6 Aluminum Chassis Plate
Gen III radio tray for longer servo life
Dynamite® .28 nitro engine with pull start
Pre-set suspension geometry
Metal-gear transmission and sealed differentials
Center and rear dogbones
15mm adjustable oil-filled shocks

[@RC-Closer1313]

All of your motors are tuned so well !! The sound is crisp!

[@eddiekane154]

Thanks for keeping nitro great!!!😊

[@jesseortega8598]

That thing Rips 😃. Pretty Awesome for a Ready to Run Nitro. Thanks for sharing.

[@rc-ops]

Great video and awesome bash spot. Nitro Wooooo! 🔥🔥

[@Penguinz113]

Wow that looks crazy! Im thinking of getting my first nitro soon, they sound epic!

[@shrimp_s0da814]

One of my favorite rtr nitro truggy … that thing is a ripper 👌

[@AJYZF1R2010]

I love how well balanced it is I gotta get one

[@stevejackson3564]

For a ready to run, tlr has a nice truggy . Runs fast with the 28 in it. I like it when it Flys. Thanks for the video. Can't wait to see a lot more of your toys.

[@henryfoster3212]

Tank you in has A good New Year 💯😎🎊

[@muhammaduzair4626]

Great video, like always. The car looks and runs amazing. Would it be nice if you could show us an after run protocol for a nitro engine.

[@pandoraingenieriaentodaesc6921]

Hermoso losi excelente piloto una combinación perfecta tengo uno de esos lo adoro saludos amigo Nabih

[@AJYZF1R2010]

Sick hummer dude

[@fadlymuhammad3574]

TLR, AE associated, Mugen seiki, and traxxas nitro engine have sound crispy, love it❤

[@ReadySetRC]

Great bash👍 You got the 8ight-T sounding really good.

[@allaspectsrc4178]

Nice

[@reecewatkins3389]

Would you prefer this over a revo 3.3 not looking to race just bashing type of driving

[@james215RC]

I can tell that nitro is dialed in. Tune seems almost perfect. No bogging high rpms. Just right ‼️🤛

[@marathonrefrigeration9593]

Rare right? So many buy nitro and don't know how to and don't have enough interest to spend time and learn how to tune properly.

[@james215RC]

@@marathonrefrigeration9593 yeah. Took me years to learn. Then you learn low end and idle. You're golden. Unless it's a Traxxas nitro engine that is. I could never get them ones dialed in 100%

[@electricnitrorc]

Awesome truggy 👍 you got the Kyosho ST 3.0? If so how do they compare?

[@mattnewell5499]

Which protek battery and how to charge it with my hitec rdx1? Thanks

[@ll.7927]

Thing flies threw the air.

[@kamillapaj87]

2 nitrage 5.2 ,Boss 😀 Let me know if you go forward with cnc gears for nitrage 5.2 gearbox , i might be interested , aldough i did not driwe my nitrage yet since i restored it , but i read somewhere that the big plastic sprocket with pin tends to go bad

[@DameMediaVids]

Yo carbon, if youre in NC I fly race drones I'd love to link with ya and get some cool drone follow footage. Also, I know about all the tracks and stuff around here if you was interested. Love all ya vids and cars man.

[@RickyD1968]

Link to fuel bottle in video ???

[@RickyD1968]

It seems like it is not very fast but has a lot of torque ???

[@rc-ops]

when you took off the pull start did you have to change the engine mounts to do the bump start? I am having a hard time finding engine mounts to do it

[@shrimp_s0da814]

you can use TLR 4.0 motor mount , that’s what i did to mine

[@rc-ops]

They are hard to find. Losi does not sell 3.0 or 4.0 any more. They just sell the rtr engine mount@@shrimp_s0da814

[@chris-qe6sr]

"King Headz Team Losi 8ight Standard EZ Change Motor Mount", you can buy it at many of the popular online stores.

[@davidgauciborda6698]

Where can i get one in europe pls

[@firststep7750]

I'm wanting to get into RC as a hobby and I've concluded (after watching many of your videos) that 1/8 scale to me is a little small and 1/5 scale is just too large (stowage and transportation). The truggy on the other hand (some have equated them to 1/7 scale) seems to be the right size. Not too small and not too big.

[@Joshuawhu]

The best option probably is 1/10

[@mikeyyyy8915]

@@JoshuawhuIf he said 1/8th scale is too small, why recommend a smaller scale like 1/10th scale? 1/8th - 1/7th scale is the best scale for RC, hands down.

[@Joshuawhu]

@@mikeyyyy8915 ik but 1/10 is the best size

[@jayknight139]

how is it tuned so perfect wtf.?