Part 3, LOSI RTR 8IGHT T, Tuning New Motor 1st Time For Base Tune using Byrons 30%/11% Fuel

[@TysonKlose]

I remember when I first got into the hobby. Videos like this would have been priceless because you can learn so much.

[@BOTAJELL]

Tyson Klose yes sir my Nitro Brother Tyson!!!! I hope all is well with you and your family bro! I remember you and your dad going to races together! Have you herd of anything from the Forum? I have many Newbies that can go to it and bring some life to it? I guess no one cares about it like I do because no one has responded to my latest posts yet! Anyways good to hear from you bro !

[@meganfitzgerald651]

Yeah for sure, when I got my first nitro when I was 14 now I'm 33, there wasn't any you tube videos to help me gain a much better understanding of how to properly tune a nitro engine, after many hours of headache and blisters on my finger from pull start lol here i am many years later with a complete understanding of nitro carburetors I'm thankful now

[@prasadsupun9010]

Good job

[@High_Octane]

naw they still are...

[@benedictterry5958]

I dont mean to be off topic but does anyone know a way to get back into an instagram account..? I somehow forgot my password. I would love any tricks you can offer me!

[@caruso2804]

i have many electric cars and just bought my first losi 8ight and this video was very usefull in helping me tune my car..Thank you

[@venM9]

Your neighbors came out to watch. Lol. Its awesome .

[@goldenkangaroo4969]

Thinking of getting this Losi eight as my first car. This guy definitely knows what he’s doin, watch all his videos. Thanks for sharing BotaJell. Just south of the border from yah here in PA.😂👍

[@ChrisBhris222]

Motor sounds so good I’m done with brushless. I’m getting a losi in 2 weeks I don’t care what my girl says !!

[@BOTAJELL]

Drop top Wop hahaha 👍🏼 !!! Good stuff! There's nothing like a good screaming engine!!! ⛽️🔥🔥💨🔊🔊Zeeeaaaaahh!!!! Let me know if you ever need help?

[@nitrorcs6374]

Chris Rock electric is boring never had one just seems like no fun

[@yopacific]

MUST RIP!

[@yopacific]

The Nitro Godfather. Loving my Losi Truggy......just put a 053 exhaust on....will tune today :) Thanks for your AWESOME VIDS

[@eugeneroundtree4620]

Botajell

[@hugocinco2420]

The dynamite big block engines are great. Good video

[@yopacific]

Just got my Losi8 Truggy. Lovin these vids and she’s running BrapKnasty. Word up to the Throgs Neck Bridge from Florida.

[@BOTAJELL]

🤝💥👊💥🤜🤛

[@ronniewilliz153]

The vid where he black smoked the pruis. ?

[@Douger318]

just got mine other day, runs pretty good, did the 4 tanks heat that damn lower mount which i cant find. may take to machiune shop have them mill the oem tall fucker down some for bumb box hate that pull starter got back plate coming

[@derekmatson9452]

Bought the same Truggy and today went to run 30% in it after doing all your breakin procedures and setting up all the stuff for The bump box and I couldn’t get it to idle without the glow igniter. As soon as I took it off it died Unless I kept giving it a good amount of gas to stay running

[@BOTAJELL]

That’s a simple fix just lean your low after you pre heat your engine to 200 degrees Fahrenheit until it can idle! Do not touch the idle gap screw it should be set already from factory at 1/2mm. Don’t just run 30% fuel !!! It must be Byron’s 30-11%

[@derekmatson9452]

BOTAJELL LOL I messed with the idle gap screw... it idles after I preheat the engine and as soon as I remove the glow igniter it’s Dies. I run 30% - 11% torco fuel

[@BOTAJELL]

Derek Matson Torco fuel does not carry 30-11% only Byron’s does ! If you want to use Torco? You must add some castor oil to it if your a basher and like to be at wide open throttle. If you messed with your gap? You must set it back to 1/2mm then use your low speed to make it idle . Also make sure your high speed is at flush or a little In because if it’s way out ? That can cause you issues also

[@derekmatson9452]

BOTAJELL sorry torco 30% is 10% oil. I’ll give it a try do you know how to get the idle gap screw back to half millimeter?

[@BOTAJELL]

Derek Matson right but it’s only 100% synthetic and you must have a 50/50 mix of synthetic and castor in your 10% oil but it doesn’t. You will have to add castor in it if you really want to bash it’s a must!! 100% synthetic is only good for racers with only short bursts but of full wide open throttle no longer then 9 full seconds. Byron’s 30-11 comes with everything already done for your and done consistently in a lab 🧪 🔬 not a garage in somebody’s home . I used to run torco and I miss the smell from it but I’m done adding castor oil to every gallon every time I run. Get the right fuel , reset your carb , preheat your engine and make sure your igniter is fully charged and ones your engine fires 🔥 up keep it running! Give it throttle and keep giving it throttle until it clears up for a bit don’t be afraid to do this and then remove your igniter

[@glenns6094]

I've had this buggy for over a year now and just now getting around to breaking it in for my backyard track. Hopefully the .21 engine is broken in the same way. Thanks for the video🤛

[@BOTAJELL]

🤝💥👍💥👊💥💨💨

[@ericreese38]

Sounds great! Could you please guide me as to how many turns about you are on the low and high speed needles from closed? Please and thanks! Any help would be appreciated!

[@BOTAJELL]

Thanks but I don’t go by turns . If you take your time and watch this series of videos you will catch on to how I tuned mine to where I live and that time! Where you live and where I live there is different weather/temps/humidity going on so the time that worked for my taste and ears will be very different by you. If I was by you I would tune the same way as I did on this series of videos and i will set the carb idle gap the same way then the low and high will be set for your weather

[@whiteface5741]

Dang , you have lots of RC stuff !!

[@BOTAJELL]

White Face 👍🤝🤣💥🍻

[@allenstory7117]

Nice i love my Losi 8eight T RTR love your vids

[@BladeBarn]

I use the metal aluminum tape to cover wheel holes. comes off and provides a stronger seal

[@BOTAJELL]

GunsCarsBikeCigars 👍🤝

[@LyroLife]

Your neighbors must love you

[@thenoodler]

Neighbors must be thrilled.

[@bradwilson4686]

Hey bud thanks for the video i live in the south and humidity is terrible i think my car is to lean do you by chance know what the factory carb settings are on these

[@BOTAJELL]

What fuel are you using?

[@norcalsawsquatch9854]

@BOTAJELL I have a Team Associated Monster GT 8.0 I messed with the carburetor settings on all screws and it won't start now. Can you tell me or show me how to set the 8.0 carb back to factory settings? Thanks ahead @BOTAJELL 🤘

[@BOTAJELL]

I tune to how I like it to sound to me I don’t go by turns ?? Idle gap 1/2 mm then I lean low speed until it can idle only after I heat the engine with a heat gun to 200 degrees Fahrenheit then after it idles I lean the high speed until it looks and sounds good to me . But you must use a good fuel with the right mix ! I like 30% nitro with 11 % oil but the oil must have a 50/50 mix of castor oil and synthetic oil and it must be from a professional fuel place because that’s how you know your getting what they say they have and it will be most consistent just Facts!! To many people now making there own fuel mix’s now can only sell in quarts because they do not have the right setup nor do they pay the taxes to sell legally in gallons to people so open your eyes 👀 at all times and look into where your getting your fuel from. Be carful to who you listen to aswell because those guys are getting there fuel for free to show on there videos and lie about all the times they rebuild there engines! Those guys only race and don’t bash so they don’t use the mix we need nor do they care about you or the hobby because if they did ? They would never become blow jobs for free garbage 🗑 fuel

[@norcalsawsquatch9854]

@@BOTAJELL Right on BROTHER! 🤙🤘 I have this MGT8.0 just stashed in my closet bc i can't get the engine to run. Im gunna give it a go

[@chrisbrownlee7048]

Dude you're the man everything I did I had no problems this car is sick! You're damn right about everything not that I had any doubts I just hadn't done it so thank you

[@whitneytimo5580]

Hello and thanks that i,m part of the famely i bought a lamberto collari 32 engine for my hpi xl i want to know what you think of that engine or shell i install new lrp z28r greetings from holland

[@derekmatson9452]

Yeah man I was wondering if you knew what might be wrong just replaced my bump box wheel. After getting the truggy started and tuning it a couple times it sounds like he doesn’t want to spend nowhere anymore and the fly wheel just spins smoothly when trying to use the bump box. Nothing seems crazily loose like it has before. It’s almost like the box is too much for the fly wheel like it spins it loose??

[@dougbreese613]

You buy chance have a motor mount for the rtr losi for numb start left. Can’t find one

[@garyfaulk5250]

I am looking forward to getting my Losi 8 I have a Kyosho neo 3.0

[@born2fish838]

Should it smoke at idle? If your rc smokes while your in the throttle but doesn't at idle is that okay?

[@qroadrunner1996]

Thank you BotaJell I appreciate

[@qroadrunner1996]

Your help

[@Douger318]

what should carb screws be at ? just starting piont im new getting a losi 8 buggy this week so watching all you stuff

[@peterkarv2845]

Man...the neighbors must love you..lol.

[@gorillazombies189]

Peter Karv I was going to ask if his neighbors cared. I definitely can’t get away with tuning a engine in front of my house.

[@crxsleeper18]

Peter Karv my neighbors like when my buddy brings his nitro. They come out to watch lol. I thought they would be pissed

[@BOTAJELL]

Zombie Peanut if they ever give me any lip ? They know I will bring my Motorcycle club over for a party 🎉 and that would be worse the. Thunder trust me!!! I have done this already before and that's why I can break in engines at 11 on at night as well!! Lmao!! No BS I have proof of everything I say!

[@burhan999]

BOTAJELL 🤣🤣🤣🤣

[@BOTAJELL]

burhan999 🤝👍💥 kzbin.info/www/bejne/mIeuqI1vf6t-gdE

[@crxsleeper18]

I think ima get this for my first nitro. Really liking it

[@BOTAJELL]

Josh Elkins you can't go wrong that's for sure! At the end of the day after you have learned on the stock RTR Dynamite.28 motor just remove the engine and throw the fuck out and drop a real motor on that bitch that will blow your mind and run so much better trust me! Anyways let me know if you do get the RTR or even better the race 4.0 8T Kit so I can congratulate you on it and let me know if you ever have any questions or problems because I will have your back and help you out !!!

[@crxsleeper18]

BOTAJELL thanks man 👍

[@FullSend93]

How reliable is this truck? Engine wise. I want to get one but am busy and just want to start up and run. Don't mind tuning here and there just not every single time I have to run it. Thanks.

[@royarsey5429]

i followed part 1 & 2..this is the final and all i can say is ..very good tutorial. Thanks Bro !

[@BOTAJELL]

Roy Mariano 👍🏼🍻🍻

[@AtvRacer]

the mad scientist at work

[@danielk5815]

Would really like to get back in to this, i used to build these from parts on ebay and sell them as rtr... This looks like it might be a good starting kit to just have as an rtr, yeah?

[@BOTAJELL]

Dan Kellett yes it is it’s a great platform to start out with for sure. Wish I had something like this years ago lol! My daughter runs this RTR Nitro Truggy and I run the TLR 4.0 Nitro Truggy Race Kit but I have it set up for bashing !

[@leomerino3906]

Boss nitro man what air filter would you recommend for the losi truggy?

[@BOTAJELL]

This over your 8T filter NO ?’s www.motorsaver.com/os1105.htm

[@gearheadaddict7183]

If u were serious abour gettin rid of it, ill buy it from you for my son.. itll be a good christmas present for my boy..

[@BOTAJELL]

We need to talk ! I got lots of goodies for it also and I think that would be a good build series for you on your channel as well besides a good NITRO RC for your boy! We have to speak over phone. E mail me if you got it? Or if you not serious? No worries I don’t have to sell it I just can’t see your kid with an E word is all. My 3 daughters ran Nitro MTs then I got them a E word Summit and they cried 😭 about that and wanted nitro. My girls are bigger now and very busy with ice skating and other sports so no time to run there new Truggy . My daughters used to run LST, savage , and mgt . Then I got the oldest one the losi RTR Truggy and threw a back plate on it .i almost didn’t do that and was going to install a Novarossi 28-8 REX in it that I have but never got to do it

[@davidk5243]

I have a question when i start my losi eight nitro truggy the same one you have in this vid the truggy just goes to full throtal and just randomly stops how do i make it so it itals well?

[@BOTAJELL]

Sounds like your servo may be going bad . Try replacing it and see if it happens again

[@davidk5243]

@@BOTAJELL thanks appreciate it i got the problem fixed i needed to reset the high and low speed needle and it worked perfectly i also think it was to cold outside.

[@sticktron2857]

So we know what adjustments are important

[@grantandrews2755]

How does thickening the diff oil put more power down doesn’t it put more strain on the engine or spur gear?? Also why do you bloke the holes on the tires?

[@BOTAJELL]

Grant Andrews I explain it many times in past videos over and over. Do you race or Bash? If you Bash or just want to keep up or even beat 8S Xmaxs or 6 S Lipo Arrma KRATONs or 4 S TLR Truggies ? You must do the Diffs on your Nitro Truggy or Buggy! But Do Not Do this if you race at race tracks!! I blocked the holes on the RTR losi Rims because I want mine sealed so when I wash my Daughters RTR Losi 8T the wheel won't get any water 💦 stock in them making the wheel heavy and off balanced! I usually only use Proline or DE Racing rims then I will mount Badland 3.8s to them and there are no holes at all on them and it's great .

[@hizzleman4111]

Awesome video my friend. What back plate and engine mount would i need to upgrade the Losi 1/8 8ight RTR buggy?

[@BOTAJELL]

Hizzle Man41 same as the Truggy .28 but don’t waste your money on that engine and buy a .21 Novarossi BONITO engine or a Paloma gold head But Bonito or a Mito 7 is way better and you will be much much happier trust me! Just run the crap out of that RTR .21 Dynamite or sell it off in new condition and get a real nitro that can run hard headaches free

[@jaredalexander6600]

Man I can't wait till I get mine....

[@maufitted]

that it a very good video men !! i just buy one of those losi 8ight-t, and i just wanna start with the break in the engine!! regards men!!

[@BOTAJELL]

Aquilez Esta thank you!

[@chrisfischer8595]

I use same fuel great stuff

[@euronymous6998]

Hey man would this rtr model be able to handle a 28-8 novarassi out the box? What all are must need upgrades if any to safely run a novarossi 28-8 on this rtr model I'm thinking of just buying this rtr instead of a kit just for now I've had this model a couple times before and I absolutely loved it

[@BOTAJELL]

You will put more power to the ground with the race kit like a 4.0 because the diffs are different so when you thicken the 4.0 diff oils you will feel it and on the RTR it will always feel thin and with a Modified Novarossi 28-8 it will pizza 🍕 cut the tires and that’s wasted power not getting to the ground and one wheel wonders sometimes the front wheels will just spin like crazy and back wheels are lazy . Also the 4.0 Truggy race kit is balanced better so when you want to jump high it’s a lot more controllable and you t will feel better!! But if your new to this hobby and never had a good quality Nitro Truggy before or if your coming out of the Nitro MT stuff ? The RTR 8ight T will feel great 👍 for you like a million bucks compared to a Nitro MT but the 4.0 is even better. There are better shocks also besides Diffs and out drive cups and lightened spurgear, ring gears and the Axels are greased and sealed . You can stick a stock 28-8 or 7 in a RTR no worries 😉 and it will be fun until your plastic turnbuckles break but you will get more out of those engines on a 4.0

[@euronymous6998]

@@BOTAJELL Thanks for the advice bro I appreciate it and the fast response! I'll probably just go with a 4.0 kit then I've seen your videos on them and it definitely seems worth it to me I dont want to have to be replacing parts all the time because of the power the 28-8 has

[@BOTAJELL]

jc guy kzbin.info/www/bejne/aHvVgaapgJKmrJo 💥🤝💥

[@ybeykoz]

Where is the temp gauge or temp gun? Did I miss it or you don't check the temp when tuning?

[@BOTAJELL]

Yes there were other parts before this

[@abooddoost9902]

My friend i have a problem i bought a losi truggy rtr new and i bought another start box tlr when i put the car over start box the distance is not enough The wheel does not touch the engine to work ... i have a problem in the engine the engine is a little high what do i do .. i bought a base for engine from TLR truggy kit ??? 🤕🤕🤕

[@BOTAJELL]

Abood Doost you must use the TLR 4.0 engine mounts after you remove the pull start and install a back plate

[@abooddoost9902]

@@BOTAJELL Thanks my friend I wish you happy days

[@jussk811]

Do you know if the LOSI 8ight T RTR is based on the 3.0 or 4.0? I’m looking up upgrade from the stock chassis and also upgrade the shock towers. Would really appreciate feedback.

[@BOTAJELL]

The losi RTR is definitely not No TLR 4.0 and No 3.0 race kit!! There are many things different from diffs to bearings to outdrive cups to suspension to many things and it’s definitely deferent then the 4.0 because deferent chassis plus everything else but it’s the same style chassis like the 3.0 . Just the 3.0 is lighter and hard anodized bust same style/shape chassis. Many of the parts from 3.0 and 4.0 will fit on the RTR losi

[@nickcervantes2159]

new to the RC, the box under the buggy whats it for?

[@BOTAJELL]

NICK Cervantes the white box was just to keep the truggy off the ground so if the wheels spin it won’t take off and the black box is called a Bump Box that is used to start my Truggies and Buggies because I use Nitro engines that use back plates for a better seal and more power and longer run times !! I don’t like nitro engines that use pull starts and roto drill starts they all suck compared to a nitro engine with back plates!

[@allenstory7117]

It's a starter box it starts your engine

[@nickgraupman8457]

Bye Byrons 😫😫😭😭😭hard to believe I just bought my last gallon

[@BOTAJELL]

I know what a shame ! I bought my last 4 gallons last month.

[@nickscheuring6287]

Man! How do I get my car to run like this ? I have been messing with it for hours and hours. I can’t achieve a stable idle and even if I some how get it to idle just a tiny bit of gas and the thing shuts off... any ideas ?

[@BOTAJELL]

Make sure you are running Byron’s 30-11 nitro fuel then make sure your idle Gap is 1/2mm open, then make sure your low and high speed is flush and flush or whatever stock settings is to help you since your new to this. Then preheat your engine to 200 degrees Fahrenheit then with a good medium heat glow plug and a fully charged igniter start it up and if it fires up ? Keep Reving it for a little so it Clears up and gets warmed up a bit then let go of the trigger/stop giving it gas and see if it can idle ? If it dies out ? Lean your low speed little by little until your engine can idle! Once it stays running , throw it on the ground and start full throttle runs then if it sound and looks like crap ? Keep leaning your high speed needle until it sounds and looks great 👍 but if your engine starts to idle high when the car is still ? Just richen back your low speed needle until the idle drops a little! Do not use your idle screw for that ! After your idle gap is set to 1/2 mm it stays like that forever only use your low speed needle as your idle

[@ericross1901]

Hi there u look like u know what ur doing I have a question ti ask u how u tune the .31 gas mix kind whats the setting

[@CorvetteC6-LS2]

What glow plug is better for 30% people say cold plug ? That true?

[@BOTAJELL]

I always run a medium glow and turbo plug

[@CorvetteC6-LS2]

Ok soo I from Connecticut medium plug is good for 30%

[@CorvetteC6-LS2]

@@BOTAJELL thank you Botajell💪

[@s.garcia5013]

Botajell. Can you tell me if the Center diff is out on my rtr. It whines when it comes to a stop without applying the brakes. Check out the vid please

[@BOTAJELL]

Sounds like your mesh is to tight ? Stop driving it and check your mesh or check for bad bearings. Check everything, check to see if there’s any play in the diff or clutch bell and if there is replace all the bearings . Also check the breaks sometimes if something is off the pads can make that noise also .

[@s.garcia5013]

@@BOTAJELL Thanks. I gotta hear that tick when setting the mesh

[@s.garcia5013]

@@BOTAJELL so I replaced bearings and shimmed it until I heard that tick then tightened it. Hsn and man adjusted and put two green springs on the clutch. Check out the new vid. How does she sound to you ?

[@nitrogas5719]

When you preheat the engine with a heatgun do you heat just the head or also the crankcase

[@BOTAJELL]

Everything but mostly the head just go around the engine! Stay away from fuel tank and electronics then take the temperature from the head . Just like this video and many others I’ve done

[@nitrogas5719]

BOTAJELL thanks

[@mouseboy101]

awesome video, cant wait to see mini you send it flying on some jumps haha

[@qroadrunner1996]

Hello BotaJell I’ve got my car set up the car is still somewhat rich and I’m trying to get it to where when after you’ve gave it a nice long run and once the motor settles down, it seems to choke when I take off again and ur video says I should be able to pull off smooth and nice what is that please don’t tell me I need to lean my idle needle

[@BOTAJELL]

CLEVELAND COLEMAN Do not touch your idle screw!!!! Make sure your idle gap is 1/2 mm !!!! Then warm up your engine with heat gun to 200 degrees! Then start up your engine and keep leaning out your low speed needle until she can idle on her own. Then put the car on the ground and run it full throttle and keep leaning out your high speed needle until it runs good . Then if you hear 👂 your idle get higher ? You may have to richen the low speed just to lower your idle sound! Never touch your idle screw to lower or raise the idle only your low speed and only at 200 plus temps never cold!!!!!! Zeeeeeaah!!!!!

[@Happygrowercbris420]

Why do you silicone the tires

[@BOTAJELL]

It’s good to use silicone spray on all plastics and even rubber to protect everything and keep everything looking fresh after bashing or racing

[@Happygrowercbris420]

BOTAJELL ok thank you love all your videos man ❤️

[@CorvetteC6-LS2]

You thing 30% is more power then 20% ?

[@BOTAJELL]

Not just powerful it’s better and runs better and cooler! The most important thing you should be talking about is the 11%oil Byron’s 30/11 uses not just the 30. 11% oil with a 50/50 mix of castor oil and synthetic oils . That way you can do it all bash or race and keep tune better .

[@tommieharrell6961]

botajell do u know what kinda motor mount to run start box engine on the 8ight rtr

[@BOTAJELL]

Tlr 4.0 engine Mount is what you need I say it all the time in my passed nitro videos

[@RandoTark]

Hey BOTAJELL, so Im working on base tune for same engine / car. Engine broken in and engine warmed up before any tuning performed. Im struggling w/ bottom end stability of tune tho. Basically whats happening is after doing some full speed passes, if I bring it back and let her idle for 10+ seconds ... if I do a blip of like 50% throttle for 1/8-1/4 second ... RPMs will shoot up nicely and quickly(w/ lots of smoke) but when they come back down the engine bogs below idle then most of the time recovers its idle 1 second or so later, but sometimes it bogs so low that it stalls out. Another behavior is after said high speed passes, engine starts idling then within 5-20+ seconds it will seem to drop idle slightly again(load up?). Is this all just a matter of overly rich LSN? Im curious as well, what idle gap do you start with, because Im not sure if thats correct on my engine, I started around .6-7mm or so(engine manual doesnt specify a specific starting measurement lol). I think my HSN is ok because if I do a couple of WOT passes, the top end I see a thin trail of smoke similar to the vid above and sounds similar.

[@BOTAJELL]

Jason M set your idle gap to 1/2mm not 1mm and definitely not 6 or 7mm lol 😂. Warm up engine to 200* Fahrenheit, start it up and if it does not idle ? Lean the low speed needle until it will stay running for at least 6 to 7 seconds then set the truggy on the floor and run it back and forth at a full throttle to see where your High speed needle needs to be . So you may have to keep leaning the high speed little at a time until your engine sounds good and runs and sounds good but still see a little smoke . If your idle sound goes up ? Do not lower the idle needle! Lower your low speed needle a cunt hair at a time until the idle sound drops ! Always use Byron’s 30-11% nitro fuel with medium plug and everything will work out fine together with this tune I just said . If you run some traxxas shit ? It will confuse you because the engine will sound and put out different amounts of smoke and this is why most people new to this get confused

[@RandoTark]

@@BOTAJELL thanks for reply, yeah i meant to say idle Gap i have is somewhere between .6-.7mm, so pretty close to 1/2 you specify. I'm running stock plug with some 20/11 nitro currently. idk what temp stock plug is, maybe ill swap out w/ med/hot ones i bought n retune, considering what u suggested.

[@BOTAJELL]

Jason M run 30/11 forget that 20. Unless your breaking in a new engine. If your breaking in new engine ? Use 20/16! Send me a video of how it’s running so I can see it or if your in Long Island N.Y. ? Stop by my house or I will try to go to you and I will set you up so you can start having fun ASAP!

[@RandoTark]

@@BOTAJELL thanks much for the offer, unfortunately im on other side of country lol. i dont have easy access to fuel u mention, ill tune best i can w/ ur suggested approach. just now i readjusted my idle gap to size of small paper clip, measured those are tad smaller than .6mm ... breakin is already done on engine. my hsn was previously pretty good, but now i just checked my servo epa adjustment and carb was only being opened like 9/10 of the way on full throttle. so, ill reset the lsn n hsn and retune. oh, im wondering what settings for this carb did u start with? 2 sources on this car say 2 diff things lol!. so, is starting flush on hsn good starting point? i think both sources i mention said bout 2 turns out on lsn as starting point.

[@BOTAJELL]

Jason M I start from flush and flush and I tune by ear and eyes ! I don’t count turns or care about that . I don’t care if it’s 100 turns ! If it sounds good and looks good it’s good to me for my Nitros or my 12 year daughter RTR truggy !

[@RcFunDrizzy]

Nice video bro 👍 motor sounds sweet 👊

[@BOTAJELL]

Rc Fun thank you! Yes not to bad for a RTR Dynamite! It also has a back plate and a closer exhaust and that combo will give us some more RPMs out of this motor and I also like the LRP Glow Plugs

[@stopbeingapatheticbitch8628]

Which dynamite .28 you have on it. The standard .28 or the mach2 big red

[@BOTAJELL]

The stock RTR LOSI Truggy .28

[@eugeneroundtree4620]

@@BOTAJELL what up

[@BOTAJELL]

Eugene Roundtree 🤝💥🤜🤛

[@RobBevilacqua]

Love the videos, brother. After 15 years out of the hobby, I'm back and picked up a 8ight-T and broke it in exactly as you did over the series of video. Besides getting a 053 pipe and better motor, what other upgrades do you recommend for this truggy?

[@BOTAJELL]

Awesome 👏 welcome back 👍💥🤜🤛 I would do a Novarossi.28/8 engine with a 41032 header and a 51021/9886 pipe !! Then get TLR 4.0 turn buckles and all three 4.0 Diffs !

[@keithbates8482]

@@BOTAJELL Hey brother will the 8T 3.0 and 4.0 patrs fit this truggy please let me know

[@dfwboxingisback9173]

Nice vid. Should I seal my engine?

[@BOTAJELL]

DFW Boxing is Back no need to bro don’t sweat that especially if it’s got a back plate like this one uses . If your O-rings are torn on the carburetor or the back plate or pull/roto ? Just replace them with fresh ones and Lube them up with green slime or shock silicone spray and install them also Torque you head bolts down and if your experiencing leaks after that and if you notice your chassis with a little oil or fuel ? It’s your Crank bearings . Also make sure your exhaust gaskets are fresh no rips so no leaks and no cracks in fuel tank and fuel lines are good with no cuts on them

[@Johnnblaze21]

What back plate do u use and what i need. To run a bump box

[@BOTAJELL]

smoke21ghost what engine do you have and what Truggy or Buggy are you using?

[@treyvontucker4892]

@ botajell you got any badlands for sell

[@stevem9141]

My LHS has these on sale for 350.00. Thinking about picking one up How has yours held up?

[@BOTAJELL]

Steve M cool 💥👍! Just make sure it’s the Truggy Not the Buggy unless you like the little buggy more?? Truggy is always best because it can do it all! Let me know how it goes? Is the 350 price for buggy ? Or Truggy? If it’s for Truggy ? I’ll have to get another lmao 🤣

[@stevem9141]

The buggy is 350 and the truggy is 400. The buggy has the .21 and the truggy has the .28. I just picked up the buggy today and got her broke in. Ran about a quart through it. Still gotta fine tune it sometime this week, but lovin it so far. Check out HobbyTownUSA.com. They have them online at this price right now!

[@BOTAJELL]

Steve M I knew that the Truggy was to good to be true at $350 lol 😂!!! No thanks on the Buggy I got a 4.0 TLR Buggy But already but I would but another Truggy even if it’s a RTR beginner rc if it was ever at $350 new lol !! Thanks for getting back to me on this and clearing things up! I’m waiting for the all New Nitro TLR X TRUGGY to come out next. I know it will be stupid money but I must have it . My 4.0 TLR Truggy was $700 bucks when it first came out and now it’s 500 bucks lol

[@mrsideways4574]

I’m getting my TLR bump box , new mount for the engine and backplate in a few days. An do you have to get a backplate for a modded 28-8 when you get it from Neil or does it come with it

[@bubbawrx7072]

Hey my nitro friend. I had a quick question. Hoping you can help me out. I just bought a losi 8ight truggy rtr and I was wondering if I could upgrade to the 4.0 kit chassis? Just because I like the fact that chassis has the engine mount marks. It would help me out as I am a getting back into nitro again. Thanks, Erik

[@BOTAJELL]

Erik Alvarez I definitely recommend the TLR 4.0 8T race kit over the RTR No questions! Everything is better! But I say save your money and do your best to align your motor. Keep it level as possible and not to tight because you will go threw a lot of clutch bell bearings if you do or even clutch bells? 3.0 would be the most direct fit chassis to your RTR just letting you know. Even TLR 3.0 race kit is better then RTR but the Losi RTR will and can do a lot for the money. Ours jumps well and runs good but not even close to my 4.0 Kit

[@bubbawrx7072]

BOTAJELL Thank you my nitro brother. I really do appreciate the info. I got a 4.0 chassis for a steal at 25 dollars brand new and was going to swap it out in the rtr. So you are saying it won’t fit? And I will definitely be buying the kit soon just want to get back into the feel of nitro. Really loving the losi 8ight platform! Happy New Years!!

[@BOTAJELL]

Erik Alvarez most of the things should fit but you will need a different rear chassis brace . The 3.0 chassis will fit 100 % dog bones and everything.

[@bubbawrx7072]

BOTAJELL Thank you

[@eisiice8521]

Erik Alvarez o

[@superaidenproductions1870]

Hey man can you give me spaspific details about your break in method, like whta fuel for brake in, which I’m assuming is not 30/11, just give me all the details u can please, thanks Ps. Can I do this in the winter

[@BOTAJELL]

Just check out my videos from part 1 on and I say everything that I use and do. Wish you the best 🤝

[@BOTAJELL]

Yes you can do this in the winter but you will need a heat gun like I show in my passed videos

[@Happygrowercbris420]

Dude watch the videos

[@superaidenproductions1870]

I make random videos Please enjoy dumbass I did I mean stuff like type of fuel because he uses his own blend, small details he doesn’t cover in the video!

[@weaverfromtha913]

Are you on any facebook nitro groups? Also i would like to chat with you about diff fluids. I have two of these losi's. Hope to hear from ya boss shes a screamer thats for sure!

[@BOTAJELL]

stacey weaver thanks bro! No I just do this but maybe I’ll do a Facebook or Instagram thing someday??

[@weaverfromtha913]

We have several groups. Nitro rc enthusiast and nitro engines unlimited come check them out man we'd love for a boss like you to join! We have all kinds of og nitro people in the groups.

[@flaviochapa3003]

Hi , Im new subscriber fairly new to the hobby, I bought a traxxas nitro truck about almost 17 years ago, now I want to start again, Im looking into Losi 8ight Truggy RTR just like the one in the video, but Im also looking at a Kyosho Inferno Neo ST Truggy RTR really similar, which would you recommend ? Kyosho is only $79 higher

[@mrsideways4574]

Flavio Chapa losi

[@BOTAJELL]

Kyosho is great as well but I highly recommend the 4.0 race kit or a Tekno

[@flaviochapa3003]

Thanks a lot, Losi it is, also thanks a lot for all the videos, very useful for us starting on the hobby.

[@BOTAJELL]

Flavio Chapa anytime bro!

[@DrunkinPunch]

Hi BotaJell, first off love your channel! Could you please spare a couple of minutes for some advice? I have just got myself a Losi 2.0 T rtr hardly used mint condition Totally because of your 4.0 beast 👍 Now the engine is the standard 454 and previous owner had it running on crap 15 fuel. I use Byron 25 on my other nitros and would like to use on this. What would be your advice on changing over? Thanks

[@mrsideways4574]

You have to retune it or even get a new piston and sleeve but try retuning it first but if it’s really bad you might have to get a new piston and sleeve

[@DrunkinPunch]

Thanks for advice! All is well, had it running today. Basically treated it like a new engine. I’ve got it idled good and running awesome. Could probably get more out of it but leaving how it is for now👍

[@BOTAJELL]

Scott Clark go with Byrons 30/11 on everything!! Even small block!

[@BOTAJELL]

Your engine will run better and better to tune with Byrons 30 % nitro and 11 % oil !! It Must have the 11 % oil that will have the 50/50 mix of Castor and synthetic oils . That 454 motor is a better motor then this new 28 that comes on new Truggy. Learn on that then slap a Novarossi 28-8 or a PICCO Boost or the new LRP.30 X or .32 X

[@DrunkinPunch]

In the new year I will be changing out for the 32, or maybe get the 4.0 kit and put the 32 in that but will see. This 454 is running sweet on 25 but I hear what you say and will change over fuel. Keep up the videos!! Thanks for getting back to me really appreciate it.

[@jonragan6389]

Would this be a good starter nitro? Easy to work on good motor and such?

[@BOTAJELL]

Jon Ragan yes good to start out with! My 11 year old daughter likes it better then her savage.25 and her summit she used to have.

[@jonragan6389]

BOTAJELL alright thank you planning on purchasing this and never had a nitro . I’ll definitely be rewatching your videos a few times when I get it

[@peek2661]

I know this is an old video, but am looking into getting this RTR setup. I have a cheaper RTR buggy I got awhile back but never really dove too deep into it. Just wanted to ask for the tuning, you want a slight smoke trail correct? Being sure the engine is getting lubricated.

[@cheezyrider1111]

Do you run the same %30 in your .21 engines?

[@BOTAJELL]

I only run 50/50 mix of castor oil with synthetic oil in my 30% nitro ! Not ever 30% is mixed the same !!! In fact they are and can be very different from one another so be careful where you get your fuel from

[@cheezyrider1111]

man I never thought I’d get a response lol, thanks for the advice boss. I’ve been running sidewinder 20% with 12% castor in my .18... you think that’s a good fuel?

[@sohailahamd7387]

PlZzz tell me price brother's

[@danritter2839]

What’s your thoughts on the VP power master 30% nitro that’s what I’ve been running seem pretty good to me

[@fresherc9057]

I have a .28 in my monster buggy 2 speed transmission 1/7 scale beast lol name's nitro nice ride by the way brother

[@crazykid9162]

Nice rc car where’s the cover

[@BOTAJELL]

Mohamed Laeeq Shaik thanks . This is my 11 year old daughters RTR Nitro LOSI Truggy . Not mine , I run pro NITRO race kits set up for bashing like my TLR 4.0 Truggy. What do you mean by cover ???? Sorry I don’t understand?

[@thecman26]

@@BOTAJELL I think he means body.

[@RCmaxxUK]

Nice 1 mate. Enjoyed the vid. 👍👍😎

[@xxSuperDave]

Looking to pick up a RTR 1/8 BUGGY. I'm trying to decide between the Losi 8ight or the Kyosho Inferno Neo 3.0. Both are right at the $350 price mark. Which would you recommend out of the two??

[@BOTAJELL]

Losi 8ight Truggy ! The NEO is a little smaller. It’s like a Big buggy but that RTR losi 8IghtT is just like a 3.0 but without the quality parts from a TLR Kit

[@xxSuperDave]

@@BOTAJELL thanks. I'll definitely be watching these great videos again when it's time to break in the motor! I've broken in a Traxxas Slash Nitro but their method was a little different.

[@CorvetteC6-LS2]

Is ok run 30% on this buggy?

[@BOTAJELL]

This is not a buggy its a Truggy but if you run 11 % oil in your 30% Nitro fuel like Byron’s? Yes sir you can and should run this fuel on any nitro engine just like we all do . I run that fuel on any small to Big Block Modified and stock for many many gallons !

[@CorvetteC6-LS2]

@@BOTAJELL yess I love this fuel is tune better and easy thank you man

[@dustinjohnson8770]

Supposed to idle a full tank

[@chicalitrece9409]

2 tank

[@syndicatecat9315]

Witch one u recommend more 30% or 25%?

[@BOTAJELL]

SYNDICATE CAT bro always use 30% with 11% Oil!!! It must have 11% oil if you run the Byron’s fuel like me!! Don’t get the 9% or the 8% !

[@syndicatecat9315]

BOTAJELL so this is the best?: Byron Rotor Rage Masters Blend 30%

[@BOTAJELL]

SYNDICATE CAT Byron’s gen 2 30-11%

[@onemic703]

I need some help man.... what fail safe do u use?? Im new to nitro. I want to build a losi from the chassis. But i keep hearing i need a fail safe.

[@BOTAJELL]

Michael Harris I use the fail safe from my Futaba 4PLS and 7PX system . I do not use any kill switch either on any of my many Nitros that I have. Killer B does make a set up for Nitros if you really want one . Give them a call and ask .

[@onemic703]

BOTAJELL thankyou sir appreciate the help

[@BOTAJELL]

Michael Harris 👍🏼

[@khusboosoni4296]

Nice car

[@BOTAJELL]

Thank you kzbin.info/www/bejne/aHvVgaapgJKmrJo 🤝💥

[@sammygonzalez7627]

Man, how fast is this thing. It is screaming ?

[@seanjhonson6441]

What % nitro were you running in vid?

[@BOTAJELL]

Sean Jhonson for what ? For breaking in Nitros or running my engines for the rest of its life ???? I show and explain everything in this video what that I only run Byron’s 30/11 on every nitro engine I have !!!! That’s it!! I only run 20/16 when I break in new engines but after that it’s always Byron’s 30 % with 11% oil !!!!

[@seanjhonson6441]

BOTAJELL ok did not see first part vid. But yeah was asking after break in. Good info thanks man!

[@seanjhonson6441]

I had a kyosho burns dx years a ago with a .21 os max so I’ve been outta the game along time and wanting to buy my son this losi 8 kit that’s why I was asking.

[@BOTAJELL]

Sean Jhonson that’s awesome 👏 bro 👍🏼👊⛽️🔥💨 I would love to gain another Nitro Brother especially a new generation Nitro Brother to take this game over from us and take this to the next level Any ?’s Your a Super Dad bro that’s awesome 👏!! Most New generation kids don’t know what a Fn Torques Bit is or a Flywheel puller or a Torque Wrench 🔧 is used for !! Sad But True!

[@mtctookie25]

Good stuff

[@BOTAJELL]

mtctookie25 thank you!

[@jp4145]

Would you recommend a racing clutch for the casual driver ? So does it makes a lot of a difference between a good normal Clutch ?

[@BOTAJELL]

A racing clutch for what? Nitro Truggy or Gas 5th scale ?

[@nickdogg1993]

BOTAJELL these videos youve posted have been crazy informative! I was out of the nitro scene since 2010. Out of the RC scene altogether. But you have officially brought me back! Ordered a new bump box abd some battery packs for my Losi 8ight 1.0 race kit! Its got a Novarossi P5XS .21, really hoping the engine isnt locked up from being stored since 2013. Either way, I bought this 8ight-T RTR kit yesterday. $399 from Horizon. Hell of a deal! Quick question though... you think its safe to break this engine in on 30%? Thats all I have right now. I called and asked a Horizon tech and he said that with this Dynamite .28 its best to break it in with the fuel I plan on running it with daily. (Which would be 30%) but you use 20%. What do you think brotha?

[@BOTAJELL]

nickdogg1993 if you run Byron’s 30% nitro like me ? Make sure it has 11%Oil in it and you will be safe for everything even break in because you will have it very rich anyways ! That’s plenty oil and it will have castor and synthetic mix

[@nickdogg1993]

BOTAJELL thanks man! Btw, last night i took my glow plug out of the rossi .21 and tried to turn the flywheel by hand and its not budging. I was planning on dropping some 3 in 1 through the carb and a few drops down the cylinder. If i heat this thing up and let the oil soak in for an hour or so, you think it will free up on the starter box? I appreciate the advice!

[@BOTAJELL]

nickdogg1993 take the plug out and preheat the engine to 200 degrees Fahrenheit just in case the engine has a tight pinch still . Then just set it to Bottom Dead Center

[@nickdogg1993]

BOTAJELL awesome man thank you! Will try that out and let you know how it goes!

[@nickdogg1993]

BOTAJELL so I heated up the engine and it didnt help with the flywheel... what I did was take a flathead screwdriver and kinda "pop" it clockwise on the flywheel and it loosened right up! Compression is good from what i can tell. My glowplug is arriving today so I will know tonight if she fires up! I was getting nervous when it was still seized up lol.

[@Audacious209]

What glow plug do you run?

[@redraider7614]

Seems standard.

[@nwo4life746]

It's sounds great

[@johnholland3476]

Will 10,000 cst be to thick diff oil ,?

[@BOTAJELL]

John Holland Hell No Not for me! Nitro Truggy for Bashing we do 100,000 on center Diff and 50,000 front and rear Diffs! Do not do this if your racing on a track! Only do this if you Bash and want more power to the ground

[@ashleypattison4737]

If you are racing at Race meetings Astro for 10,000 if more for high grip but if it’s dirt I would run low

[@elizabethlaster8746]

I would give my right arm to get my nitro engines running like DAT botajell........

[@BOTAJELL]

Elizabeth Laster kzbin.info/www/bejne/mIeuqI1vf6t-gdE 💥👍

[@davepetersen4808]

Nice job/rd dave

[@BOTAJELL]

Dave Petersen thank you!

[@shanjitht7306]

is truggy best or buggy on tlr 8eight t

[@BOTAJELL]

Shanjith T TRUGGY all day everyday!!!! 👍🏼!! Zeeeeeaah!!!!!

[@whitepony6506]

Hey man, love the vid. I have the same rtr and was wondering about a 28-8 nova. I've heard the rtr diffs can handle the power if you replace the diff grease with oil. Is this true? Also, I disassembled my rear diff to see how dirty the grease was, and it's full of oil. I thought there was grease in the rtr version.

[@blaqkyellow]

Question isn’t the LRP R5 ment for 25% nitro fuel? For 30% don’t you have to use a hotter plug?

[@BOTAJELL]

No I only run 30 / 11 % that uses a 50/50 mix of synthetic oils and castor oils always and I always run a medium plug and I don’t care for what the companies tell newbies to do to try to cover there asses This is what I do from what I have been threw with Nitro and learned since 1992. I run all nitro engines on this mix of fuel Big Block and small block and Byron’s is the company that makes it . There are some other brands that make this mix and there awesome aswell as long it’s this mix of half castor and half synthetic oils and 11 % of it in 30% nitro

[@Dollarblk11]

Aye big bro !! I see u love that losi company. Please try a redcat out one time. I own a few as well as traxxas products . But that redcat Mann it run like a champion

[@twindromans]

🤩🤩