Carburetor Replacement Husqvarna 7021p With Auto Choke

Hipa Carburetor for GCV160LA0 GCV160 GCV160A GCV160LA GCV160LAO 5.5hp 160cc Engine Lawn Mower
amzn.to/3s7uI0O

[@JStig12]

I know what you mean about the variants of the carburetor. Some of the HU700Fs use a lever-less auto choke, which start with the choke flap closed and are pushed open by a mechanism on the mower. I bought one of those carburetors before I realized that I needed one for the lever like you have.

[@Lawnmowerman02346]

Make it easier on yourself use two metric alignment studs for assembly then swap out one at a time with the bolts . Much easier

[@redneckcomputergeek]

I debated that but its not something most would have on hand to use.

[@JeffreyStrader]

When the auto-chole starts to increase the idle, adjust the Governor spring to compensate......(as for rebuilding carbs, sometimes a rebuild can nickle & dime you to death, when a new carb is much cheaper, like you said)

[@sammyc2268]

About to change the carb on my 7021p and I agree! For a couple bucks more why not get EVERYTHING?!🤔 Thanks for the detailed video! It Will make the project much easier👍

[@rogerhalleux9221]

Your video helped me get those gaskets straightened out. Thanks

[@NotMeeither]

I agree with You, why rebuild when you can have a new one for practically the same money !

[@OldGuyDIY]

Nice job. Subscribed and liked for the box cutting alone. Thank you.

[@pault2183]

thank you! got the Husq7021 running again, you're right that sandwich gasket stuff had me cussing

[@warrenvalentino5763]

Wicked good video. Thank You Very Much for the tip on the HIPA products. the heck with rebuilding carbs, it is easier to get the whole carb kit. Love watching your videos.

[@Jeekinz]

I have a 5521P with a B&S 550EX auto choke. Works great. Just clean the carb every 2 years.

[@bryduhbikeguy]

Had a New carb on the mower last year and the cable was broken for 'stall'.Always ran the tank dry.This year it started then quit after revving to full power.Cleaned the float bowl and the lines from the tank.The bowl had rust,even though empty and cleaned it.Starts and quits.Aeeeghhhhh.

[@martincramer9815]

thanks i touch them thanks figuring it out gasket to many made my day bro auto choke is ok but do not push it to far . gald you broke it before i broke mine lol appreciate it.

[@billwilson5341]

Not sure what you're trying to say but it sounds as if everything turned out well. That's good.

[@liljoeii6091]

I think the way you did it was Awesome. I heard husqvarna was supposed to stop making these things and go all battery Thank you for the video

[@jamesc3978]

Excellent video, well illustrated and great attention to detail. Many thanks.

[@wildbill23c]

Looks like a great mower to modify to a manual choke setup....that would be what I'd do. Just because it says Honda on it don't make it better...just more expensive when it needs fixed, and they do need fixed occasionally just like any other engine.

[@robertclark5752]

Good luck on some of the parts. They just laid off a bunch of workers at huskvarna.

[@michaelritchie9875]

Being that these are Honda made engines and used by a variety of different equipment manufacturers, I think we will be okay long into the future.

[@robertclark5752]

@@michaelritchie9875 Honda is phasing out many of their motors. Patents have ran out. Other manufactures have copied Honda. DuroMax or Bilt Hard are examples. $149.00 motors on Amazon. Honda quit selling push mowers. Just a start. Briggs and Stratton has filed for bankruptcy.

[@joshuaperry9375]

"ohhhhhh push mowers..." I love push mowers lol

[@jkyontz]

Another job well done 😊

[@mnikolew]

Thanks!

[@michaelfarris2556]

Crazy ass that's mashing the box.

[@markroderick3300]

That gasket that was enlarged was because of being soaked with gas many times

[@gerischi8871]

Nobody knows a 18HP Tecumseh Twin i think .....

[@schithead7]

The heck with picking up the cardboard , , , It`s Biodegradable plus birds will grab it up and make nests out of it ............ SEE , , , PROBLEM SOLVED FOR YA , : ) TAKE CARE BRO ,,, LOL !