Carburetor Replacement on Your Riding Mower - Piece of Cake!!!

Get the Carb HERE: amzn.to/3C7HvTW
,
,
,
,
,
,
,
,
lawn tractor,briggs and stratton,how to,lawn mower carb,how to install a carburetor on a honda lawn mower,how to install lawn mower carburetor,lawn mower carb repair,lawn mower carb replacement,huskee carb replacement,huskee lt4200 carburetor,huskee lt4200 carburetor removal,huskee lt4200 carburetor cleaning,how to change mower carb,mower carb,mower carburetor cleaning,mower carburetor adjustment,mower carburetor leaking fuel,mower carb install,whoteewho
.
.
.
.
.
Carburetor Replacement on Your Riding Mower - Piece of Cake!!!

[@WHOTEEWHO]

Get the Carb HERE: amzn.to/3C7HvTW

[@joelmcmahan7386]

A good shot, a great dad, an honest guy to singing playing music and videos to try and help his fans save some beans is just a few reasons the good ole boy at WHO TEE WHO gets a 👍 from me 💯% of the time. Thanks brother Who and God bless you and yours. 🎥💪🏽💯👍🙏🏻

[@markgriffin9287]

I just wrote the same comment before seeing this one 😆

[@joelmcmahan7386]

@@markgriffin9287 great bing bang minds think alike. Good shooting to you and yours. 💪🏽💯👍

[@leonhart2452]

With my tractor I was having similar issues. I installed a fuel shut off valve. When I get done using it I shut off the fuel and let it run the gas out of the carb before I turn off the key. With no gas in the carb to go bad and plug up passages, the running issues cleared up. I also put Berryman's in the gas to help keep the internals of the carb clean. I mix it in the 5 gallon can I haul the gas in. When it starts at ting up, I mix it up with a double dose of the Berryman's, this cleans the crud out pretty good.

[@FarmingUnclear]

Slipping the two connections off was the only part I needed and this video slipped over that. Thanks.

[@WHOTEEWHO]

Didnt skip over on purpose. Assumed that part was common sense. Just undo thr connections then put them back the way they were

[@deathofnight101]

@@WHOTEEWHO How do you undo them? I had to bend them to get them off, I've heard just twist the carb but I can't twist it because of the mounting bolts

[@WHOTEEWHO]

@deathofnight101 I don't remember exactly, has been a while since I did it. I remember it being slightly odd, but just lightly bending them til it disconnected

[@deathofnight101]

@@WHOTEEWHO all good thank ya

[@TheTonygong]

Man, you keep putting the work in. I respect that for sure

[@WHOTEEWHO]

🙏🙏🙏

[@ryanharris6045]

That was college quality small engine repair instruction. Well done!

[@lessage760]

WELL THIS WAS DIFFERENT BUT THANK YOU SIR FOR SHARING HOPE THIS FIXED YOU UP

[@Bob-lq9ys]

Good video , been working on my own small engines for over 35 years

[@WHOTEEWHO]

Hey Bob

[@davidwilliams9795]

Mowing's not as much of a chore when all is good with the mower.💥💥👍

[@markgriffin9287]

Honest, awesome dad, loves the Bing bangs, and gives advice on life. (Plus answers every question and comment!) WTW, WE LOVE YA MAN! ❤️ YOUR AMAZING 👏

[@WHOTEEWHO]

Thanks Mark

[@timshelley8635]

Great video! I've got a Huskee too. My friends just put a carb on it. They borrowed it and it broke down on them. So far, it's been a good one.

[@AndrewMartinez1776Redux]

Next video idea: Riding mower drive-by. Set up some target & shoot them while trimming your lawn. 🤣

[@WHOTEEWHO]

Already did that actually 😝

[@AndrewMartinez1776Redux]

@@WHOTEEWHO how did I miss that video? I've been watching you for years! 🤔

[@JoeyOutlaw]

Great video, very helpful. Id like to see an update to see if this completely fixed your problem and god forbid this is not one of those replace everything and the last part you put on fixes it lol

[@WHOTEEWHO]

It completely fixed it

[@DinoNucci]

Taking a *before* picture is always a good idea 😀

[@Oldnoitall]

Another good one By the MAN was having some problems with my cub cadet and I finally figured out it was fuel related started pulling lines replaced filter getting ready to jerk the fuel pump part I’m looking at the Fuel solenoidI thought well start at the beginning so I looked down in the fuel tank and there was an orange ear plug right over top of the fuel line hole lol If there’s a lot of hooky dooos to hook up take plenty of pictures

[@philliphall5198]

Lololo didn’t know you were a mechanic too Good to see you back and keep your old carbs and clean them for back up. Hipi are best buy

[@dizzysdoings]

My late husband got an after market carburetor for my mower. It runs rough. He was going to get a name brand for it, but instead, he got cancer and died. I'm hoping I can change it myself. Doesn't look too hard, so thanks.

[@eddiehuff7366]

OK, I'm gonna brag a little which means next I start my mower it will blow up but..... I'm on my 19th year with my Craftsman T1000 18 hp. Recently, believe it or not, I tore down the engine to replace the broken cam. Put it all back together and it runs like a Singer sewing machine again. Instructional videos like this one you did saves us folks a lot of money. 🙂

[@WHOTEEWHO]

Awesome

[@kanakamaoli9642]

I watch all you video's. I must say you never disappointed. ALOHA🤙🏼

[@WHOTEEWHO]

Appreciate you watching

[@anthonyhernandez3430]

13 uggy boggies...highly technical term...love it!! There is always something too funny!! 😁 😂

[@WHOTEEWHO]

😝😝😝

[@Jack-sh6xr]

I thought that was a trigger the rope was tied to and I was whotee you madman

[@WHOTEEWHO]

😝😝😝

[@sturisa]

Nice job WTW, enjoyed watching!

[@Ultimatereloader]

Nice!

[@WHOTEEWHO]

👍👍

[@garrettforchrist2700]

My weed eater has a finicky carburetor. I change that almost every year or every two years! They sell those carburetors cheap. It's a super cheap, easy fix! It's a good idea is to shut off your gas if you can, and run your carburetor completely out of gas before you store it for the winter! Especially, if you're using gas with ethanol in it. The ethanol will get all gummy if it sits in the carburetor for long periods of time!🇺🇲✝️🇺🇲

[@WHOTEEWHO]

If it has a carb I only run no ethanol in it

[@jo-jobighiker5552]

I agree 100%. Just replace the carb, don't screw around cleaning passages and jets.

[@Dwayne7834]

Good job 👍. Good you got back running.

[@WHOTEEWHO]

Running good!

[@rquest3059]

Excellent video but your missing big "WTW" lettering across the hood and an anti aircraft gun sight hood ornament.

[@crazycoffee]

*laughs in worn out cub I've rebuilt the carburetor on millions of times*

[@macmanmcmaster4]

Great Job WTW !!!

[@radiowaveguitarist1332]

You take one part off at a time and lay them down in a straight line. Just disassemble each piece laid out in a row. It's reverse order when putting it back together! Simple

[@dudesweet4151]

This video is great seeing how i have the same mower but i got it from a friends for free and got it running today but he had messed with the throttle linkages so is there any chance of me getting a few pictures of the linkages from u? My throttle is somehow just wide open and the lever doesnt do anything so i know its gotta be simple

[@bobbyw3881]

Had a question i noticed on the card you replaced the solenoid is pointing sideways. The one on my mower points downward. Is this going to be an issue or are they different carbs? Thanks for your time and the video was good would of liked to see more on the taking off the linkage but thank you for the information.

[@WHOTEEWHO]

Hmm. Been a long time. That shouldn't matter tho

[@garypostell5268]

That a very good deal👍

[@WHOTEEWHO]

👍👍

[@dennisberry9793]

Every is cheaper in the USA not here in OZ anyway have a great week I have a rover same as MTD .

[@garrettwomack6140]

Wish you showed takin the linkage on and off fightin for my life right now

[@WHOTEEWHO]

It is tricky, just be slow and careful.

[@williamcrane8236]

I haven't seen him do lawn care since he was using zipties for his string trimmer. This outta be a goodun!

[@WHOTEEWHO]

😝😝😝

[@garypostell5268]

Big question is did it fix it?

[@WHOTEEWHO]

👍👍

[@carbonspyder235]

All that WHO-TEE-WHO All You needed was a spark plug 🤣 Good Job 👍🏻

[@WHOTEEWHO]

😝😝😝 that was the 1st thing I tried

[@carbonspyder235]

@@WHOTEEWHO Hope you let us know if the carb fixed the problem. I was sure you changed the plug just a little harassment all in fun ✔

[@chrishelms1967]

No engine start?!!!!?!?;!!..... My OCD is not happy 🤬

[@WHOTEEWHO]

😝😝😝

[@bcjdwbiernfjherwfbowfib]

45% of the way to 1 million!

[@WHOTEEWHO]

🙏🙏🙏

[@charlesmorgan1879]

And then he does weeding with several calibers...💥💥💥

[@WHOTEEWHO]

😝😝😝

[@BPToneReview]

I replaced my carb, spark plugs, all filters and my Toro now works BUT at full throttle it’ll stall. I get off the gas and it ramps back up to normal. Get back on it at full throttle and again stalls…rinse repeat. Makes me think it’s getting too much fuel and flooding. Any ideas?

[@WHOTEEWHO]

Sounds like an air/fuel problem. Could be a gasket leak letting air where it shouldn't be. Or carb may need adjustment

[@laurel7562]

I replaced it on my Huskee crunk it up and it ran for about 5 seconds and died but a really strange smell came out of it. It wouldn't crank again after that. It had fresh gas, oil, and a new plug. Any ideas? Push mowing is killing me.

[@WHOTEEWHO]

Hmm. I'd check all the seals 1st. Make sure no air leaks

[@robinrapport8728]

But, did it start and run.

[@WHOTEEWHO]

Yup

[@the_mowron]

I agree with just replacing the carb on lawn mowers but: The Chinese crap carbs only work on 4 stroke engines. Don't buy an el cheapo chinese carb for your chainsaw or 2 stroke weed wacker. For 2 strokes, you need to use the OEM carb.

[@johann8209]

Use the 50bmg on the old carb.🤣😂 No I guess you need the core charge back.

[@WHOTEEWHO]

No core on these

[@butler386]

Sooo how did the tractor run after the carb and filter change outs? Good I hope. Sure looks in good condition. Thanks for the videos.

[@WHOTEEWHO]

Ran perfect

[@briancarroll8382]

Did you put anything on the new gaskets before you installed the new carb?

[@WHOTEEWHO]

No

[@crisprtalk6963]

I am trying to clean this style carb I got on my Lt4200, I cant get the bowl off. Can you tell me does it screw in to the carb body?

[@WHOTEEWHO]

New carb costs $30. Waste of time to even fool with cleaning or rebuilding I say.

[@dudesweet4151]

9/16 or 14mm bolt on the bottom of the carb bowl and it'll come off

[@inspectorsteve2287]

When you buy a new carb do the 2 adjustment screws come pre-set? I know you might have to tweek them a bit but in general are they pre-set?

[@WHOTEEWHO]

I didn't have to adjust mine much but you may not be so lucky. Hard to say

[@inspectorsteve2287]

@@WHOTEEWHO fair enough. Thank you.

[@ericfavreau6583]

How did you disconnect.the linkage?

[@WHOTEEWHO]

Just bent it w pliars

[@ericfavreau6583]

Tanks!!

[@apostolicoutdoors]

You da man!!

[@WHOTEEWHO]

👊👊

[@kenworland1865]

I'll be doing the same to a 20 year old generator! Back up to the back up generator! lol

[@WHOTEEWHO]

Sweeeeeet

[@adarshasokansindhya]

💥💥💥

[@WHOTEEWHO]

💥💥💥

[@dougmottert2258]

did it start?

[@WHOTEEWHO]

Fired right up

[@dougmottert2258]

@@WHOTEEWHO You are the man. Nice going.

[@zackemjolner7647]

But did it solve the problem?🤠

[@WHOTEEWHO]

Yes

[@ihredrules1855]

OMG, all those beautiful boooolaaaatttte slingers and then you cut corners with a Husky mower🫣 Priorities I guess!!!

[@rocknraptor3195]

Better than pushing it!

[@itsjustjoe3790]

Yeah, but does it take Glock mags??

[@guycripplecock7804]

I've wanted to shoot my mower

[@WHOTEEWHO]

Me too

[@2Atreehugger]

Dang it mr who…. Too painful to watch this video because I’m so tired of my mower. I have been working on mine because of fricken flat tires….. walked my property and some of my neighbors looking for the culprit. Just started helping a neighbor on some of his property and that’s where it’s at….. no more there. I had to internally patch all of em. Plugs wouldn’t work.

[@WHOTEEWHO]

They can be frustrating

[@YellowHammer26]

👍👍

[@WHOTEEWHO]

👍👍

[@DinoNucci]

RoaR

[@WHOTEEWHO]

Roar

[@erockoutdoors633]

👍🇺🇲

[@WHOTEEWHO]

👍🇺🇸

[@grisslebear]

It was most likely vapor locking.