CARD HOLDERS FIRST IMPRESSIONS (ULTRA PRO & ULTIMATE GUARD)

[@Jakelol1980]

I use Ultra-Pro One Touch 35pt + Dragon Shield Perfect Fit Clear Sleeves for cards over 25$ and Toploaders + Penny Sleeves for cards over 3$ but under 20$. My favourite is the One Touch ones with the Perfect Fit Sleeves they fit like a dream.

[@Jakelol1980]

And i use mine for Pokemon and Magic.

[@Blueeyesultimatedragon]

Now that is a bonafide setup. One touch and perfect sleeves are great!

[@sir4982]

I was really wandering, cause I bought Cases just like the One Touch, but I'm a little scared to put the cards in a perfect fit sleeve, cause the corners are sharp and whitening happens like so easy, but I think I will try it nevertheless..

[@Jakelol1980]

@@sir4982 I think your talking about sports cards with sharp corners. In that case i wouldnt use perfect fit sleeves just like you say.

[@IHeart16Bit]

Yup as you noted, 35pt in magnetic/touch cases and perfect sleeves fit practically perfectly for standard sized cards.

[@SteadyTeddy]

I could be wrong but for the snap case it looks like all your pinching troubles are coming from the fact that you put the card in the wrong side first. It looks like you're putting the card in the larger diameter (outer) piece and then try to squeeze the smaller diameter (inner) piece on top of it when you should be doing the opposite. Putting the card in the inner snap part first will make it much more unlikely that the card will be pinched unless you really mess up the placement of the card.

[@csds92]

not sure if you've found the right sleeve for the one-touch cases, but the perfect fit Standard size kmc sleeves are the answer

[@LarasWelt333]

ya i found it. thank you * - *

[@nkhtesting9436]

I would prefer dragon shield’s perfect fit or resealable perfect fit. KMC turn yellowish time by time while dragon shield’s don’t.

[@LarasWelt333]

@@nkhtesting9436 why yellow o-o

[@rolandosepulveda40]

Just the only way that you didn't probe it it's the way that it works. The kmc perfect fit Magic/Pokémon size on the One Touch works perfectly with no movement inside the case, yugioh cards needs regular size japanease sleeve or double sleeve with this last to works perfectly on the case too. Bro

[@MateoB73]

“…actually, I do know how I feel about that”. Great reaction. Nice vid. Thanks.

[@Lamborgini-gb7gs]

Nice video bro, I use dragon shield sleeve fit 4pts to protect my cards and then put them into ultimate guard. Fit perfect 👌

[@filiptosovic1693]

Your Video helped me a lot man! Thank you❤

[@JulienKalfon]

If you should choose one on the three ? Which would you choose ? Sleeve + One of this case and put in a wallet.

[@zexs]

useful video! why did you stop making content?

[@Blueeyesultimatedragon]

Taking a break !thank you ;)

[@dekelcohen9403]

Does the ultimate guard really have such huge gap between the back and the front? 13:23

[@belac999]

Is it okay to put yugioh card in regular sleeve (dimensions 62x89mm) and then oversleeving with KMC mini (65x91mm), in case with 35pt?

[@coffinguy2680]

Where can I get those display stands that you have in the background?

[@innocentshine2778]

Thanks for the review, I was about to buy one of these magnetic cases but now I know they're probably not for me. They look like a good enough protection on their own but since it's for showing off and/or over-protecting valuable cards, I still wouldn't be comfortable putting a raw one (or only sleeved with a thin perfect size) in it. Is there a brand that does a similar product but where a sleeved card (Pokemon/MTG size) would fit?

[@Blueeyesultimatedragon]

I prefer your setup as well. I did a follow up video on this too. Id still recommend these cases for all YGO, Pokemon, and MTG but Id ideally like at least one sleeve and a snug fit in the acrylic case. There isnt a "perfect" case out there but these are definitely a good start. Cheers!

[@darksnow7857]

I guess you could just buy a magnetic case but with higher pt, so you could doubt sleeve them

[@Blueeyesultimatedragon]

@@darksnow7857 Pretty good idea, I havent thought of that before. Might affect the visibility since it will be 3 layers but it would definitely keep it more secure in the case.

[@innocentshine2778]

@@darksnow7857 I'm not sure it would work though because apparently the issue isn't really the thickness but the width of the card with the sleeve that doesn't fit in the case?

[@RN-md2cj]

Pro-Mold magnetic cases function the same but accommodate a penny sleeve, or a wider sleeve, which I believe is what you're referring to. Hope this helps 2 years later lol

[@LarasWelt333]

Can i put weiss schwarz cards and pokemon cards in a ultra pro magnetic card holder with 23 pt or no? Does that fit ?

[@Blueeyesultimatedragon]

Im not familiar with weiss schwarz cards but if its the same size as a pokemon card (2.5 x 3.5 inches or smaller) and the same card thickness, then it should fit! I would go to a local card shop and see if they can help. Good luck!

[@LarasWelt333]

Hey thank you for the nice answer. :-) Yea its the same size height and wide how the pokemon cards. The thickness looks the same for me . :-D I want to try ultra pro with 23 pt Because the weiss schwarz card wobbles in the ultimate guard (35 pt) :-( and that is sad .

[@Blueeyesultimatedragon]

@@LarasWelt333 yea that happened to me too. I think a sleeve on the card could help as well. I’ve even seen two sleeves sandwiching the card to keep it from moving but a thinner case should help. I hope the 23pt works!

[@LarasWelt333]

@@Blueeyesultimatedragon hm i know i have 35 pt holder with sleeves ...but i want a holder without sleeves.. do you think 23 pt magnetic holder is better than 35 pt with the sleeves..... or its the same? :--0

[@Blueeyesultimatedragon]

@@LarasWelt333 The 23pt would essentially be a snugger/tighter fit so yes, I would recommend it.

[@wow-nn3tu]

Have you tried penny sleeves with the one touch?

[@audunjemtland8287]

Is acrylic glass by standard UV protective? What makes glass UV protectant?

[@Blueeyesultimatedragon]

Im not expert in acrylic glass. If Its UV coated then it would normally note it since its a distinguishing feature. If it doesnt say, its safe to say its not UV protected. I dont what acrylic glass by Standard is nor what makes it UV protected but I assume its some sort of coating

[@audunjemtland8287]

@@Blueeyesultimatedragon Ok thanks man.

[@tommy-leebarney7708]

Can you put 2 sleeved yugioh cards, back to back in the 35 or 55 pt ultimate guard case, just curious

[@belac999]

I would do sleeving and oversleeving and then put the yugioh card in case with 35pt. I think it's better.

[@alexandermagnus6947]

Is the size of the ultimate guard and the ultrapro the same in height?

[@Blueeyesultimatedragon]

Yup, ultimate guard and ultra pro are the same case height as well as width

[@KurushimiVrishraka]

Yooo, did I just say Aloha! You from Hawai'i? Cheehooo ma braddah, I wanna get one for my Fate Grand Order Miyamoto Musashi It's a small one, I really wanted something fit.. huhuhu I think mine is a bit smaller from your smallest card.

[@redemptiontcgcollector1851]

Thanks for your info👍

[@bencook9789]

One thing is the size you got is a bit big for Pokémon mtg and yu-gi-oh they should be 35pt

[@Blueeyesultimatedragon]

Yea i made a note of that in the video and description. Only getting 35pt now.

[@nightowl7261]

Are you the real Kaiba?

[@justinmadrid8712]

Yeah this video needs a remake lol. Why are you using damaged cards lol...