CardBoard Advanced Basics Tutorial guide for model making: modeling for Designers & Architects

Advanced CardBoard Basics, a Tutorial overview guide for Chip Board matte board bristol board and model making for all designers architects model makers hobbyists and crafters. I build some 2" x 2" advanced cardboard cubes, a cone and a cylinder using straight cut x-acto blades and white PVA glue.
Fiskars Circle Cutter amzn.to/2RogHoA
SHINWA Machinist square 150mm: amzn.to/39zZ7GQ
10 pack Crescent Colored Mat Board, 32 x 40: amzn.to/358rkU0
Chipboard Sheets, 12" x 12", Natural, 25-Pack: amzn.to/2KFH6MQ
X-Acto #11 extra durable 100 Pack Blades amzn.to/349F2Fu
Xacto Black Gripster: amzn.to/2JuxOCx
Luer lock bottles with needles: www.ebay.com/itm/224710545884
My Video Gear:
Panasonic GH5 amzn.to/35ZeQgp
Panasonic GH4 with lens amzn.to/2Nb5B7b
Panasonic Lumix 14-140 lens amzn.to/2FOxYmi
PANASONIC LUMIX G X Vario Power Zoom Lens, 14-42MM Power O.I.S
amzn.to/2J3KsJH
Headphones Sony MDR7506: amzn.to/2ycntIV
Samsung 128Gb MicoSD card with adapter
amzn.to/2CcEFzW
Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer
amzn.to/2NKp2kz
Pergear Tripod Tabletop Stand for the Zhiyun Handheld Gimbal Stabilizer
amzn.to/2NaKWjK
My Audio Gear:
MXL 990, XLR Connector Condenser Microphone: amzn.to/3elRw1K
Shure MVi Digital Audio Interface XLR to USB: amzn.to/2VzjgYa
USB-C to Micro usb cable: amzn.to/3cfcrSb
My Hardware:
Apple 16" MacBook Pro: amzn.to/2VrAI0C
Apple Thunderbolt 3 cable: amzn.to/3clTwVV
G-RAID with Thunderbolt 3 amzn.to/2uQppFx
LG 27UK850-W 27" 4K Monitor: amzn.to/3elxpk7
Apple iPad Pro 12.9-inch: amzn.to/2K5qwp7
Apple pencil 2nd gen: amzn.to/3elyisX
Apple iPad Mini 4: amzn.to/2VrJzPP
Apple USB-C to SD Card Reader: amzn.to/3cgGXeo
ThinkTank Shapeshifter 15" Backpack: amzn.to/2Cc6U1F
Arteza Products goo.gl/v9Lda3
Be sure to use the coupon code OHF-TPE-039 for 10% off on purchases.
Arteza 24x36" Self Healing Rotary Cutting Mat goo.gl/qiXukm
Arteza 18x24" Self Healing Rotary Cutting Mat goo.gl/DjdRkN
Arteza 12x18" Self Healing Rotary Cutting Mat goo.gl/rio17o
The rotary cutter:
45mm: bit.ly/2u8qOnF
X-ACTO X-LIFE #11 EXTRA SHARP Blades 100 box: amzn.to/37R6vgK
Luer lock bottles with needles: www.ebay.com/itm/402687721827
Music: end credits Rurlyok
rurlyok.bandcamp.com
Contact me through www.botzen.com for design work,
you can follow me on:
Google plus: plus.google.com/+EricStrebel
Twitter: at / botzendesign (@botzendesign)
Facebook: / botzendesign
Instagram: / botzendesign
Botzen Design Inc.
Industrial Design and Product Visualization
www.botzen.com

[@TheRottenICE]

This is one of those channels I randomly stumbled upon, but I'm so glad I did great content, thank you

[@wjspade]

You can also seal it with PVA glue. Works with MDF as well.

[@dave5194]

Love this series. I got so many "why didn't I think of that?" moments watching this video

[@officiallyexhausted5868]

Beautiful! Very helpful tips and tools. Thank you for posting this.

[@johnkelley9877]

I am very impressed with this tutorial! I never knew you could sand cardboard. I also did not think of Shellacking the part prior to painting. I subscribed after the first tutorial.

[@yasamanhoorfar5205]

you are in one word, PERFECT!! Thank you so so much omg I feel so confident now

[@ra.5067]

Wow! Great to see how this is done. Thank you.

[@garagemonkeysan]

Great tips on cardboard construction! That glue applicator is cool. Thanks for sharing. : )

[@teresitagutierrez3487]

first year of studying design and these videos are really helful to learn about prototyping :)

[@diycardboardmagic7219]

Your videos are so addictive. Absolutely love your work.

[@EricStrebel]

That's awesome, thank you very much I appreciate your support and comment. Feel free to share on social media that helps the channel the most.

[@ramanghafariharivand3804]

Thanks for sharing this!

[@tonyd1149]

Thank you for making and posting this video. Nice work on those models.

[@ernieproductions7354]

I found the perfect tutorial thank you, you saved me

[@sherrysunshine6986]

Thanks so much for sharing your knowledge and years of skills. I am always so sad to see waste so finding I can make things with cardboard is great! Now if I could just figure out how to recycle or make use of my grandma's medicine bottles." besides holding small things, like pins and tacts." Love a brilliant mind, wish I had skills like this. Have a great day!

[@nicecribinterior8959]

Great video!

[@benbeecher5339]

Thanks. I was always wondering about cones.

[@markdmaker3173]

Awesome video! Thank you so much for the information. Very helpful👍🏼

[@EricStrebel]

Mark D Maker You are most welcome, glad you enjoyed it. Don't forget to check out my Kickstarter campaign for the "Alfred" Backpack hanger kck.st/2Yi2Qnd thanks for your comment and support much appreciated.

[@azizqassim9257]

I really appreciate your work.. you are amazing

[@satishvishwakarma9177]

I Learnt a lot Incredible Video !!

[@barbarablenkinsop4923]

W O W. I AM IMPRESSED

[@badad0166]

A half length of the side material could be used as a "girdle" to hold the butt weld in place while the cylinder dries to form the seam just so. Or masking tape in mild tension, actually.

[@digambarkulkarni5721]

Great 👌very nice & informative video . Thanks very much.

[@TitoPerilla]

I love this Video!!!

[@EricStrebel]

Thanks for your support and comment and love, feel free to share on social media, Rock on!

[@parthadey512]

So beautiful creativity simple diagrammatic shapes very helpful Wishing to watch your first episode..please have a beautiful week

[@PetrikNZ]

With curves it is also helpful if you know the direction of grain of the cardboard and cut it accordingly.

[@chaosordeal294]

Do a video on structure. Thinner card is easier to work -- how far can I push the thinnest cardstock before I need more support or thicker material?

[@BlaBlaBlaInDaHouse]

Super impressive

[@helenreed1818]

Thank you

[@ticoiiiiii610]

Your videos are fantastic, I regret that I found them a bit late. Hope u will do a mockup video like with the foam core one. Btw, i'm going to make a boat model, u think thin foam core or card board would be better? And in my country, i think the foam cores are more like compressed paper, but we still have the 1mm or 2mm type.

[@GS-DESIGNS]

Is there any alternative way to cut out the cylinder shape without using the fiskar

[@HallenaQuinzel]

Love this video! Do you think you could teach us how to mold using thin plastic sheets found at hardware stores? I watch your videos primarily to up my cosplay and prop game!

[@oeaktas]

good work! does glue fry out in the needle? do you have to replace the needle?

[@8liontv]

Another great video, wish I had these to refer to when I was in school!

[@libbymarcus9400]

Hi-- I love your videos. Do you have a video or can you point me to one that explains how to bend corrugated cardboard the way it is done for curved cat scratch pads? Thanks!

[@diggydice9041]

You make all this look super easy but it reflects years of Doing It? Same with your approach to simple shapes in foams, the tricks for each material came at the art of working those materials & having the right tools/supplies at hand.... I like both these & I just learned of HDPE Plastics which has lots of uses in the model I'm about to attempt. Nice video....

[@AngelDawn4u]

Hi, where can I get those heavy looking weights, which you call supports in the other video. I can't seem to use the right keywords to find something to hold my cardboard at right angles while drying. Thanks!

[@japhethabrahammapis8202]

Interesting, how about a hyperbolic paraboloid roof shape.

[@PsychoEagle1101]

I just use super glue to seal the cardboard before painting. Granted, I do have to work fast, but I feel like it gives a similar result to shellac.

[@EricStrebel]

Good to know!

[@comelordjesus4078]

How do we do a bevel cut

[@oldman1978]

Very Nice work

[@EricStrebel]

Nagy Fahmy Thanks

[@A_Sturdy_Door]

If u are able to make movie props that would be an amazing tutorial

[@TJ-cg8mq]

..would have preferred it with COC for background musuc :) - Could you show us how we could incorporate these techniques in designing miniature buildings and structures. .!?! Thanks!

[@EricStrebel]

Copyright issues, wish I could use their music

[@mwcampbell5980]

How about concave/convex

[@DanielSMatthews]

How do you approximate a curve in two directions, with a section of a polyhedra?

[@EricStrebel]

cardboard is one axis bend for the most part...there are some exceptions. however, perhaps in another video.

[@ericlopesbr]

What right angle do you have? I really like the size but can’t find anything this small

[@dave5194]

I'd also like to know

[@EricStrebel]

It's made by shinwa, i purchased it on ebay from a Japanese seller

[@hopesunshine1046]

What weight bristol

[@Challenge051279]

What brand of shellac should I use and what type of spray paint?

[@EricStrebel]

Any Shellac should be good, I use the bulls eye brand, use and automotive spray paint, better quality than the hardware store

[@nicktv6727]

You have a nice kitchen

[@EricStrebel]

NICK TV Thanks

[@nicktv6727]

@@EricStrebel 🖒🖒🖒🖒🖒🖒🖒🖒

[@douglasfranks]

Would using acrylic coating spray have the same protective qualities as shellac ?

[@EricStrebel]

Maybe, you can try to find out

[@cocolonger]

Great to know, what kind of shellac are you using? ( natural ...insect-made? ) like for woodworking or is it something else?

[@EricStrebel]

Yes for woodworking

[@cocolonger]

@@EricStrebel Thank you sir.

[@92bromley]

Great video. What thickness of card did you use?

[@EricStrebel]

I have no idea but not very thick

[@comelordjesus4078]

Also where can we find a PVC pipe or different sizes

[@EricStrebel]

Any big box home improvement store or even some hardware stores, good luck, thanks for your comment, much appreciated!

[@pranaybabu7753]

Sir how to chamfer a card board pls do that vedio sir

[@dnc23x]

paper modellers unite!

[@EricStrebel]

Cheers

[@jedagelijksebraintraining]

Make a d8 please?

[@angelaeuth2462]

😍😍😍💗💗💗💗💗😍😍💗💗😍😍💗😍

[@goswamilsrtr4663]

what glue and tape is that

[@EricStrebel]

White glue and artist tape

[@azeegame4879]

plz made ogive cone card bord

[@muhammadkhairin6858]

what kind of tape is the blue one?

[@EricStrebel]

It’s just regular painting tape

[@muhammadkhairin6858]

@@EricStrebel thanks id didn't know what its called

[@EricStrebel]

No worries, just regular blue painters tape

[@marcosanthernandez]

It's 2 AM how did I get here?

[@missydavis6678]

I love you. Strictly platonic.

[@EricStrebel]

Lol

[@brerrabbit4265]

Sheet metal is not folded. It's broke or bent. You bend sheet metal with a metal brake press not a metal folding press. Hence broke not folded. 40 years as a welder / fabricator I have never heard anyone use the term folded metal. Just saying...

[@EricStrebel]

Ok, fair enough. good call. Don't forget to check out my Kickstarter campaign for the "Alfred" Backpack hanger kck.st/2Yi2Qnd thanks for your comment and support much appreciated.

[@harryvaliente9425]

Let us Pray🙏 Heavenly Father, today we kneel in prayer, asking for the recovery of all patients with Covid 19 and asking our Father Almighty for protection for those who are well. Please shield us, Oh Lord, for YOU alone can heal the inflicted and give protection to those who are well and to all front liners.... in Jesus mighty name we pray. Amen.🙏📿💒 I request my friends to put this message in your status, Let's do a prayer brigade. God bless us all.🕊❤️ #FightingTCPS #TheToughest #WeHealAsOne 🙏🙏🙏