Magneti Marelli 9GF (Fiat) IMMO OFF with Julie Emulator™ by CarLabImmo

[@primosautomoveis]

buddy, do you need to disconnect any wires in the car?

[@CarLabImmoTechnicalChannel]

Hi there! We always recommend checking the instruction manual. Here's the URL to manual for Magneti Marelli 9GF Immo Off with Julie Emulator (see Page 6): carlabimmo.com/manuals/immobilizers/fiat/fiat-with-can-ver3.pdf To answer your question: You have to disconnect the antenna coil from ignition switch. The emulator will self-adjust only after the second time the ignition is turned on.

[@filo301]

Can I read eeprom from ECU without opening, exctract values from addresses 1EA-1EF AND 1F8-1FD and then write exctracted values to emulator?

[@CarLabImmoTechnicalChannel]

This type of ECU must be opened because you have to desolder the EEPROM memory and read it to change its values. After that, the emulator must be installed to the ECU board, see the entire procedure on page 7: carlabimmo.com/manuals/immobilizers/fiat/fiat-with-can-ver3.pdf

[@filo301]

@@CarLabImmoTechnicalChannel Thanks. I wanted to install emulator outside of the ecu and write values from ecu to emulator so ecu would remain stock and i could uninstall emulator at any time(stock keys work but i want to install remote start).

[@filo301]

@@CarLabImmoTechnicalChannel similar to this: forum.carlabimmo.com/viewtopic.php?t=21456

[@CarLabImmoTechnicalChannel]

​@@filo301 Unfortunately, in this case it's not possible. In the procedure for this ECU, we change the values in the EEPROM of the ECU, not in the emulator. So the ECU has to be opened to install the emulator.

[@loaysami3152]

Is it work for truck????

[@CarLabImmoTechnicalChannel]

We need more details to give you an aswer. Please use our Tech Support Forum, describe your case and our Expert will give you the aswer ;) carlabimmo.com/newforum/viewforum.php?f=4

[@claudioneyfarias8544]

Tem para 10GF?

[@CarLabImmoTechnicalChannel]

We don't have solutions for Magneti Marelli 10GF. But feel free to use our Tech Support Forum - provide all needed details and our Technicians will try to develope a solution for you: carlabimmo.com/newforum/viewforum.php?f=4

[@amadoolivar1070]

INMO-off VW MM 9GV Brazil ???????????

[@CarLabImmoTechnicalChannel]

Hello Amado, thanks for question! Would be great, if you could use our Tech Forum to ask our Tech Experts. It's possible that Julie Emulator works with this ECU, but our Experts have to check the memory content of the ECU. Here you have the link: carlabimmo.com/newforum/viewforum.php?f=4