Magneti Marelli IAW6LPx.x HW3 (Citroen/ Peugeot) IMMO OFF | Julie Emulator | CarLabImmo

[@armandoignaciocervantesvaz2652]

What I need to do if my IAW 6LPB doesn't have Can lines? I read the ST10 with Ktag by K line

[@CarLabImmoTechnicalChannel]

Please contact me by e-mail: [e-mail] Send photos of ECU board, label and original BIN file.

[@sophielarriau7018]

we installed this module on our calculator but after 10 start the calculator is blocked, how to keep it 100% unlocked?

[@CarLabImmoTechnicalChannel]

To get technical help please use our Support Tech Forum: carlabimmo.com/newforum/viewforum.php?f=4

[@kathijakhan2548]

hi sir i wil like to do same thing you doing but i have a problem because my ecu fail to read so please tel me must the ecu be powered on to read the st10f280 flash? thanks

[@CarLabImmoTechnicalChannel]

Please make a post on our Official Forum: forum.carlabimmo.com. Describe your problem, attach ECU pictures and ECU file and our technician will try to assist you.

[@cach1979]

Why you need to read st MCU? For Pin? If i know the pin, can i put in the 24c02 memory directly?

[@CarLabImmoTechnicalChannel]

Yes, in this procedure you need to read the processor in order to read the appropriate values from it, which must then be written into the emulator's memory. If you have already read the pin, you can skip this step and write this pin into the emulator's memory. Write the pin in the original order, for example if the pin is "1234" then write "1234" in the emulator's memory. If the emulator does not work, enter the pin in the reverse order, ie "4321". Please let us know which method works for you 😊

[@bouchakouramine1493]

Hello, Do you repair it?? and how much?? I'm live in Paris ?where are from pls??

[@CarLabImmoTechnicalChannel]

Hi, do you want to disable immo in your car? What is the ECU number?

[@programacionortegavega]

is it work with Peugeot 307 with 6LPB? because I see it work to Peugeot 407

[@CarLabImmoTechnicalChannel]

support.carlabimmo.com/ecu/details/41 Here you can find the list of supported cars and ECU numbers

[@MERCEDES-astana]

Здравствуйте не могу прочитать ваш епром на эмуляторе

[@CarLabImmoTechnicalChannel]

What programmer are you using? This is a list of recommended tools for working with our products, including programmers: carlabimmo.com/download/materials/recommended-tools.pdf

[@Percha_cs]

What are the 2 resistance values for?

[@CarLabImmoTechnicalChannel]

Check pages 10 and 11 of this manual for entire procedure: carlabimmo.com/manuals/immobilizers/citroen/citroen-peugeot1.pdf

[@Percha_cs]

@@CarLabImmoTechnicalChannel nothing about the resistances

[@CarLabImmoTechnicalChannel]

​@@Percha_cs That two resistance are required to configure MPC reading.

[@Percha_cs]

@@CarLabImmoTechnicalChannelsoldering one between each two points?

[@bestofmusique9529]

Please i nead calculateur expert essence 2.0(6kpb).

[@CarLabImmoTechnicalChannel]

If you need any technical support, please use our Tech Support Forum: carlabimmo.com/newforum

[@Percha_cs]

Is suitable for 6LPA.03? thank you

[@CarLabImmoTechnicalChannel]

carlabimmo.com/manuals/immobilizers/citroen/citroen-peugeot1.pdf here you can find a list of ECU numbers that we have tested. Your number is not on the list, but it should work with our emulator.

[@Percha_cs]

@@CarLabImmoTechnicalChannel Should? what happens if don´t work?

[@CarLabImmoTechnicalChannel]

Before buying, you can make a post on the forum forum.carlabimmo.com and our technician will see if the emulator will support your ECU.

[@aleziis1723]

supports iaw 6lpc.105 ?

[@CarLabImmoTechnicalChannel]

Check instruction manual to find out if Julie supports your car: carlabimmo.com/julie-manual

[@Percha_cs]

Is Out of Stock??

[@CarLabImmoTechnicalChannel]

Unfortunately, Julie PRO Emulator is currently out of stock in our store, but this type of ECU is also supported by our other emulators, Julie Lite and Julie PSA Group Emulator. You can use one of them. Links to emulators in our store can be found in the video description.

[@juniorlucival]

is it work with 6lpb?

[@CarLabImmoTechnicalChannel]

Yes, it works. There is a list under the video with every ECU and car model described which are supported by our Emulator.

[@francescoauto9762]

CarLabImmo Technical Channel avrei bisogno di sapere come collegare Julie su 6plc.105 perché ha un hw diverso da quella del video grazie saluti

[@mevelingovender1561]

@@CarLabImmoTechnicalChannel When you purchase the emulator, does it come with the necessary pc application? Does the emulator remain in the ecu?

[@CarLabImmoTechnicalChannel]

@@mevelingovender1561 Julie Emulator doesn't need any PC application. In some solutions you have to make change in the memory content - you need a standart programmer for that. And yes, Emulator need to remain in the ECU.

[@claudioneyfarias8544]

6LP1.17?

[@CarLabImmoTechnicalChannel]

support.carlabimmo.com/ecu/details/41 Here you can find ECUs which we have already tested. There is no your ECU but it should work anyway.