Carnage - Preparing Our Drag Challenge Ute to Race!

[@davidt3196]

R.I.P to Harry and Andrew, my heart and condolences go out to Corty and their families and I'm sure you guy's will do special for Harry at the next Drag Challenge when you get this beast there.

[@someyoungguy6990]

Im a bit out of touch mate, what happened?

[@gossy351]

@@someyoungguy6990 Harry Haig and Andrew Baumgartner involved in a car accident and have passed away. Godspeed gents.

[@rckc779]

R.I.P Harry and Andrew 😞 Sad news indeed

[@mahcooharper9577]

That's awful, I heard it here too. RIP, they were legends.

[@andrewmurray6772]

Yep, I only heard about Harry and Andrew yesterday, still in shock, Harry and Corty were a great team on Haulass Garage, R.I.P Harry and Andrew :(

[@JossRickard]

Mate this has to be one of the best, most informative, down to earth builds out there.

[@honestpat7789]

Best thing about this Ute is it almost looks sleeper, but on the way to Heathcote I reckon you stop off at Lowes to invest in several pairs of Reg Grundies. Just in case you need a pit change 😂

[@jayFTP346]

Killer work 👌🏻 a rear Venetian would be mint to hide the cage threw the back window though

[@STREETMACHINETV]

Not a bad idea

[@knight2425]

Don’t forget the dash mat

[@Dragon_Vids3]

@@knight2425haha 😂

[@Malm957]

You are correct , Brad is a top bloke for finding the door trims etc. really did tidy up the interior. Only bugs Bunny freaks would know about Hussan chop.😂😂😂

[@s4ss.m8]

HUSSAN CHOP

[@rumplespliffskin]

Hassan chop gets me every time.

[@twocarguys7798]

I have never been a fan of purple paint, but this VS ute is one of the toughest cars to hit the streets an strip!!! Every week I wait to see the progress of this weapon from all involved. In my eyes this build is my all time favorite, not just because I like the ute, but it is great to watch the growth of all involved. Bring on a 7 second past Scotty you crazy man!!!

[@STREETMACHINETV]

Yeah, Purple on cars isn't my favourite either, but at least it's different to all the other VS Utes

[@nathanpeachs2704]

😂 Just love this ute, sounds epic 🤘

[@paulstanford3063]

Good stuff Scotty . I've seen some guys using clear hose to the puke tanks so you only need a quick peek under the car to check . Love this build !

[@STREETMACHINETV]

That stuff isn't very heat resistant though

[@250JefeMane]

Fantastic work mate! We can’t wait for all the mighty wheelies 3/4 way down the strip

[@danozism]

Sound, horses, colour... I might be the only one who digs purple cars, but this thing is an absolute beast! Can't wait for the next episode! Rock on Scotty!

[@LV-FOURTWENTYSIX]

Awesome work Scotty, proud of ya mate. She is a beast! Especially love the fact it fits under the stock bonnet. Cheers.

[@danozism]

Yeah that adds to the sleeper vibe. It looks awesome

[@rustymonaro184]

Go get it scotty. Great idea taking it along with the guys at mpw always good to have some extra help . All the best for the track test day .

[@trevorsmith9251]

RIP Harry Haig and Andrew Baumgartner, two legends gone too soon, condolences to the families and close racing community friends 🥲

[@STREETMACHINETV]

Yeah, it's pretty shit

[@marksmith2726]

@@STREETMACHINETV What happened to those two blokes

[@liamwindsor5854]

@@marksmith2726dead obviously

[@danozism]

@@liamwindsor5854 Did they die at the track? RIP either way 😞

[@plumbs7199]

It’s been a huge build and it’s looking and sounding awesome ( for a Holden lol!) . Well done Mate !

[@danielsultana5615]

Awesome mate can't wait to see it on the track!

[@castekracing]

So good to see the ute driving. Great work Scotty and team

[@paulfitzgibbon4110]

Scotty, Go back & grab a few more of those sockets & machine them the same. If you've only got one it'll going missing at the worst possible time. If you've got a few, you'll always be able to find one.

[@JK_Kustoms]

I love this ute👍 I had V6 VS ute, it was just rough daily but it’s probably one of the best cars that I have owned.

[@RobertBruce-kf5ze]

Love the ecotec badges Scotty 👌🏼 nice work it’s turned out awesome.

[@bushysadventures1845]

Good work, need longer vids mate haha. Keen to see it on the track.

[@fknmillsi]

Hassan chop!!! Fkn haven't heard that in ages. Love WB cartoons!

[@mahcooharper9577]

Sounds unreal, can't wait to see it turning and burning in anger - great build Scotty 👍

[@FuManchu5ltr]

I love all Scotty’s yokes.

[@Doc_in_the_carpet_truck]

Nice work Scotty!!! Another great word is flange 🤣👍🍻 R.I.P Harry and Andrew watching em on youtube great blokes!!

[@wingoson]

I can't wait to see it with the wick turned up....

[@jimclarke1108]

Don't forget the street Holden V6 supercharged badges Scotty😁

[@gemini3558]

Let’s go Scotty !!! 😜👍🇦🇺

[@-sandman4605]

It's coming together nicely 👌.

[@theoriginalwallace]

Get in! Thursday nights viewing sorted!! 😊

[@TuffMounts]

The Utes Come up a Treat Scotty! Awesome to see it this close

[@Lena_Hutchings]

Great video, keep it up!🌶

[@DarrenBoxhall]

Hey man, how come you put the plate from the intake tube to the radiator? Surely there was a bolt on the engine somewhere that you could have linked to, that way you don't get any differences in tension ender load ect. Tough mounts still flex and the body/chassis will move around with that kind of power too....enough to maybe cause issues.

[@STREETMACHINETV]

It'll only be for the first outing, It's not a long term solution

[@DarrenBoxhall]

@@STREETMACHINETV yeah fair enough

[@andrewbrown9460]

Awesome 👍

[@damoryan3873]

Hell yeah. Taking that yo motor x next year scotty

[@williamhardes8081]

hi Scotty, loving the build. what a weapon. can you please, please put a guard or shield of some kind in front of your catch cans? I would worry about getting such nice work damaged.

[@MrSamlyle]

Looking forward to the next episode... those catch cans are gunna get alot of rubber sprayed on them....

[@STREETMACHINETV]

We might put a shield up

[@shaneobrien148]

Nice Machine Scotty

[@ShaunDavis-jl6fr]

Should be able to cable tie dashmat at end to cage or speaker hole section.

[@chefcamsey1375]

Very nice

[@davidt3196]

Like#308!😂🚙💨 Some might say this is much better than a 308 (I'm one of em) but some just love the PuRiTy as our MCM mates would say. Can't wait to see this beast set new Carnage PB's all round.

[@79series]

Some pursuit rims back on and it will look like a full road spec sleeper

[@flamintasty]

Awesome project, one of my favourite builds. It sounds immense 😊

[@jesseallan3886]

There is nothing wrong with that brace. I would paint it either black or silver. Like a bought one ✌️

[@Doc_in_the_carpet_truck]

Good spot for a sponsor sticker too!!

[@3800TURBO]

Have you fitted a trans scatter sheild or blanket? And an engine tray? Got the makings of a 180mph missile there Scotty. Fit a cooling system pressure sensor and big red light on ya Haltech dash.Helps if a headgasket takes a dump, will see it instantly.

[@STREETMACHINETV]

It's got a two-piece Reid cased Powerglide, no scatter shield needed. Tray, chute, fire system are all coming.

[@chuxshed587]

@@STREETMACHINETV 37-3800lb on the start line?

[@gogetem188]

HAY buddy its down on the DRIVERS side lol heeeee get it aligned

[@andrewshepley7751]

Scotty please put some heat sleeves over those breather lines before they melt thru and catch fire

[@STREETMACHINETV]

Melt on what?

[@Dragon_Vids3]

@@STREETMACHINETVexhaust? I dunno

[@1969Risky]

<a href="#" class="seekto" data-time="695">11:35</a> Scotty, how much oil do you have there mate? I'm gonna have to call you Sheik Scotty! Brad did a fine job with the trim. I wish the VS series III Ute came with an LS engine back in the day but I gotta say that the engine in yours is pretty schmick & sounds like she's ripe for business! You have to keep up with tradition now Scotty, the dash mat has to stay for racing.

[@someyoungguy6990]

So, today Scotty speaks about the benefits of correctly secured nuts, shaft speed and what to do when you have four nipples.....!!

[@DodgyBrothersEngineering]

Scotty slightly concerned about the driveshaft sensor bracket. Being so close to the yoke, if that single nut vibrates even slightly loose it is goodnight for that sensor. The moment it can kick sideways even slightly that will come in contact. Can you add another small bracket that goes to another bolt?

[@chuxshed587]

Agreed. Also bracket is a bit flimsy considering the tight sensor clearance. Mine is 6mm angle mounted off three bolts

[@DodgyBrothersEngineering]

@@chuxshed587 if it was further back and the sensor had no chance of touching you could probably get away with one, but considering the kind of vibration it will be subject to during burnouts, it really needs two decent mounting points to stop any chance of it touching. At that distance it wouldn't take many degrees of rotation (or a sloppy hole) before it touched.

[@STREETMACHINETV]

It's 3 or 4mm steel mils plenty strong enough

[@DodgyBrothersEngineering]

@@STREETMACHINETV strength is not the concern, rotation is. Being so close .5 to 1mm that is only going to take a small amount of rotation to hit. You have to remember you have considerably more HP out the back now, they will be some fairly violent vibration back there during the burnout.

[@DodgyBrothersEngineering]

Scotty is your oil pressure sensor problem due to the issue I mentioned previously about the CAN lines being too long from the back bone? There are specifications for how long a lead can be before it starts running into "echo" issues on the bus.

[@STREETMACHINETV]

It doesn't run through the CAN network, every other sensor works fine.

[@DodgyBrothersEngineering]

@@STREETMACHINETV can eliminate that off the list.

[@The1502flash]

Rear wheels look like a cross between a Convo Pro and a Dra

[@michaelb5330]

Scotty’s new fast toy

[@warrenscarlett9302]

👍👍👍

[@GMH_GTR]

Good work Scotty. Any plans for something between the tyre and catch cans so they dont get caked in rubber?

[@STREETMACHINETV]

Yep, there will be something

[@cvytnioy56dvfuj4g7]

Nice build Scotty. Be aware, the resistance / restriction from those long hoses going to catch cans being rear mounted will be very high, you may end up with crankcase pressure problems. Like a dick, it has to do with both dia and length, the longer you go, the bigger the dia needs to be. Be worth checking if you can.

[@STREETMACHINETV]

I guess we'll find out

[@582motorsports8]

Are you goingbto show the process of getting the car engineered and rego so it's completely street legal ???

[@thepieguy4522]

Of course not. 😂😂😂😂

[@scotthunter1639]

Awesome stuff Scotty!! Going to be an absolute animal mate well done 👌

[@vnv8dude]

😂

[@Low760]

Just like most every other car that does drag challenge. Definitely. Not.

[@johnbarry8283]

😂😂😂

[@The1502flash]

Drag Star

[@Robroy1985]

Those catch cans need a shield , gonna get hammered with rubber

[@STREETMACHINETV]

We'll make something for them

[@Robroy1985]

Look at mullets breathers , they are in the ute bed , no chance of burnout rubber hitting them...

[@DukeOfTwist]

See you on Sunday at HPR

[@STREETMACHINETV]

It's going to rain this weekend, and it rained last weekend too.

[@DukeOfTwist]

@@STREETMACHINETV forcast is fine, use Axedale as the location. Only rain happened last weekend at 5pm Sunday.

[@theoriginalwallace]

Nipples... firmer, Scotty? 😂😂😂

[@Robroy1985]

Make sure you are sitting in the ute when they align it.......

[@The1502flash]

What kind of wheels are those on the back ?

[@SUPERCOACH360]

just send it

[@DodgyBrothersEngineering]

Are the tech guys going to ping you over the catch can filter facing towards the tyre? Be nice to see some kind of tin cover over it.

[@STREETMACHINETV]

Not sure why they would but we can always make a cover

[@DodgyBrothersEngineering]

@@STREETMACHINETV While it might not spit out raw oil, it will be pumping out oily fumes that might contain traces of oil. The tech guys might take one look at it and say you can't have that pointing towards the tyre. I am only surmising, I have never been a tech inspector, but I could see them questioning it. If it got to the situation you have put it there for, you wouldn't want pressurized oil being forced towards the tyre. A simple tin cover would do the trick or remote locate with a hose the filter.

[@JK_Kustoms]

Hey Scotty how do you find the bucket seat? Do you think you could get away with it in a daily driver?

[@STREETMACHINETV]

It's pretty comfy once you get into it

[@SkodaYetiFan96]

How many uggah uggahs to tighten the wheel nuts perfectly?

[@timmykern9988]

Is that a liberty gt outside

[@TheNuggetProject]

Dam right ;)

[@A.R.C.77]

😃🤘

[@kodywattus4648]

Get a hex socket and turn that down instead don't use a multi hex socket. They are weaker and will crack after little use especially with an impact of any sort. I'm a tyre fitter question me if you like but you will find out soon enough

[@STREETMACHINETV]

I'll see what I can find

[@TheNuggetProject]

The titanium wheel nuts are 12 point so he has to use a 12 point socket, unless I'm misunderstanding you.

[@kodywattus4648]

@@TheNuggetProject I'll admit it if I missed it but I thought I seen a normal hex nut

[@simonmclean5401]

Is that a 5L intake manifold sitting on the floor in front of the ute?

[@STREETMACHINETV]

Yep, do you want to buy it?

[@chefcamsey1375]

😊😊😊😊❤❤❤

[@crunchytheclown9694]

woohoo

[@stevenkirk8401]

BS - On my first filter change and trunions on a new engine I didn't get that glitter. Go Johnson tunions

[@STREETMACHINETV]

I guess we'll see

[@mysticgreg]

I ain't milkin' nobody... 😬

[@TheCasperdeigh]

need to dye the interior black

[@STREETMACHINETV]

I didn't want a black interior

[@Dragon_Vids3]

@@STREETMACHINETVthat would look just dull😊

[@NoahHudson-x6i]

Wheres the supermang videos😁👍

[@STREETMACHINETV]

we'll get to them

[@joshuabates2385]

Is anyone tallying the cost of this car . Seems unlimited

[@STREETMACHINETV]

Not unlimited by any means, at this performance level, this is a budget build

[@nathannevard797]

A tool store next door.how dangerous is that! Spending all of telfos money

[@staceyblackmore4719]

Some people are lucky some people make their own Luck with your track record and the amount of set backs you have had on the Build why the Hell would you run the engine on DYNO not knowing the oil pressure unbelievable Rookie errors again

[@STREETMACHINETV]

It's hooked up now and the oil pressure is fine, does everything it's supposed to do

[@BigPhatPartyGuy]

Well done!!!