Caroma dual flush toilet - how to change a seal / washer

Could not find a video on how to do this so here is one from us!

[@jiefu1623]

Great video. It helped me fix my problem. FYI I couldn’t turn the first lever to take the part out, so I left it there and carried on with the repair. once arm is detached I could take this part out off the grooves on both sides either. BobBaker has a different approach by right hand turning off the part below to get direct access to the washer. It saved a lot time mocking around. Many thanks!

[@ghostofakina8747]

Mate, you're a freakin legend. After replacing the washer I had an issue where mine wouldn't stop filling, I pulled it back apart several times and tried pushing the plunger thingy all the way down and experimented with which side it locks back together. My theory is maybe there was air trapped inside. Not really sure. All good now. If you have this problem just keep experimenting until it works. Thanks!

[@rosso198]

Thanks for saving me a plumber call-out Merv! I had followed the typical advice of replacing the seating washer and was tearing my hair out until seeing your video. Cheers!

[@granddeluxe123]

Thank you so much. I've fix it.. The problem was that washer somehow misplaced and not sitting properly to that small pin inside. Thank you.

[@SuperMattjoe]

Thank you so much so glad to find your video very helpful. after a simple of replacing the washer value no more hissing or leaking toilet. 10/10🙂

[@natalijawood7370]

OMG how easy was this... THANK YOU so very much for explaining it for me so i could understand.

[@vshawpan]

the red washer @1:19 is missing on my toilet. where do can i find spares for this and what is it called???

[@granddeluxe123]

Bunnings mate. Just ask them show them a Pic of your vavle

[@ac55699]

Thanks so much. This has helped me big time. Many thanks.

[@NTF-fk8en]

If you just want to do the main seal then you don't need to remove the arm, just twist the head off with the arm attached. And also check that your flush valve seat/seal isn't leaking first as that will cause the fill valve to continuously run making you think that it is the problem.

[@alanmackenzie76]

LOL Merv is now internet famous.

[@yohanjees5860]

Wow..saved me$ 450

[@williamlafontaine7205]

useful

[@npet6842]

For $30 , I just bin them and fit a new unit . Not worth the messing around , and it's all new from the get go .

[@cakeman8406]

0:04