CarPro Hydro2Foam!!! 500ml! A Foaming Wash And A Coating!!!

CarPro Hydro2 Foam combines the coating properties of hydrophilic glass fibers and a foaming PH neutral was solution. You can now wash your car and coat with Hydro2 at the same time. The surfactants will gently lift and encapsulate dirt, greatly reducing wash induced swirls.
CarPro Hydro2 Foam Link : www.amazon.com/gp/search?ie=U...
Foam Lance : www.amazon.com/gp/search?ie=U...
apexautodetail.com
@apexautodetail (Instagram)
@apexautodetails (facebook)
@apexautodetail1 Twitter)
Music ....
Brainwork.... • Brainwork- Beauty of S...
#apexdetail #carpro #autodetailing

[@apexdetail85]

If you use Hydro regularly....Share your experience please.😀 👇

[@mann3151]

How often we should use HydrO2 foam? Weekly washes on weekend! Or once in a 3-6 months?

[@AMERIKIWI]

I brought Hydr02 back in 2013 and have been using it ever since though I do now use Hydro Foam as I find it easier and better to use with the foamer and keeping car saturated during the process even after using the wash mitt. This way no rinsing until the whole car is done and if you are careful you can apply in the sun. Then pressure washing off from bottom to top, then top to bottom with the last stage using RODI water for a spot free dry. Love the stuff.

[@seanmellor1520]

i use it every couple of months, works great. Wash the car very well first.

[@joemarks3719]

Hi Brian, I have been using Hydrofoam for about 2 years now. On my car I do an annual polish with Carpro Essence, then two coats of Reload. After a month I apply Hydrofoam, and then once every 3 months afterward. I've used this on unprotected surfaces as well, after claying and iron decontamination, and have seen as much as 16 weeks of durability until complete failure. On my personal vehicle I like to add it when I see the sheeting results diminish, which is about 12 weeks avg. Any Bird Bombs, or bug splatter, I remove within 8 hours, and have never had any etching as a result, even in the summer, which is great compared to a normal wax or sealant. I've tried the others, Gyeon, Nanolex, and currently testing Adams wash/coat, The Gyeon and Nanolex avg 8 weeks. The Adams is easier to apply, I found initial sheeting wasn't nearly as good as Hydrofoam, but the Adams has a 2 hour cure time so it may do better on the first maintenance wash. It's only been on since last Friday so I can't state durability yet.

[@parksnrecsdetailing]

@@joemarks3719 do you get any streaking or high spots?

[@martinharman574]

yet another very helpful and informative video Brian. Before I buy any product I always check you out first

[@U2SuzyQ731]

Just used this product today. Very impressed with how hydrophobic it is!!

[@JoshHubbert]

hydro2 has been my go-to on all my cars. I believe I'll be moving to this every other wash. It seems to work as well as a wash and spraying of hydro, without the extra effort from both.

[@j-sonS]

Just got a new car yesterday and used this with foam cannon. This was the easiest way for me to get every nook and cranny with a sealant. Used a sio2 dry aid and it came out great.

[@in4chandru]

Thanks for the video!

[@whitepearlautodetailing4745]

Great video as usual

[@maxfriedenberger8043]

Brian I just used it on my wife's vehicle and I love it!!! So easy to use!!!! Can't wait to share it with my customers!!!

[@apexdetail85]

Yes!! good stuff!👍

[@maxfriedenberger8043]

Love it so easy...……….

[@Captain-Donut]

Black trim looks amazing. 🇬🇧👌👌

[@apexdetail85]

Thanks!!

[@mikeyp2447]

Awesome video! Will be looking into this!!

[@apexdetail85]

Good stuff Mikey!

[@toyotaman29]

Love the Carpro products, i have reset shampoo and haven't tried Hydro2 yet, thanks great vid...

[@apexdetail85]

You will enjoy the Hydro👍🏻

[@devn3813]

toyotaman29 hydro and reset are incredible

[@klasseact6663]

Just understand that when using it in a bucket wash it's not going to have lasting suds but that's ok, still has lots of lubricity...confirmed! Used this last night after the pre-wash with Bilt-Hamber in a 2BM wash and then did a post wash foaming when I was done to treat the paint with Hydrofoam, let it dwell for 10 minutes and rinsed, what a finish, THE GLOSS!

[@timothyacosta3388]

Nice video. 7:13 I feel like I'm watching the miracle of life 😂

[@aarongrantthebulk]

The only vehicle I’ve seen cleaned more is Pan’s Porsche 😂

[@rodneyjordan1909]

Really appreciate your video's... Thank u for all the information

[@apexdetail85]

Thank YOU!! much more to come!!👍🙂

[@tomevans5458]

Fortunately, I have a CarPro dealaer nearby and I will be purchasing this next time I'm in there. I have a dumb ?. Can you advise on what type of saw horse contraption the door is lying on? I've been looking for that exact product and have not been able to find one. You are my favorite channel!

[@7071t6]

@ 9:44 ,he has now protected the inside of all his items inside the garage, lol :)

[@east1666]

I love this product. My car is coated with cquartz UK, I hand wash it with Hydrofoam and blow it dry with an Airforce Blaster Sidekick. The water beading is amazing and it lasts and lasts...... Thanks for posting another great informative video

[@apexdetail85]

Thanks! The beading is incredible 👍🏻

[@rodsdaytona]

@@apexdetail85 I too have cquartz UK on my car. Cure time is about 2 weeks old. My question is now what? Your video answers quite a bit, but I can over clean my car sometimes and I understand "Reload" can be my friend, but when washing (now with cquartz UK on) I don't want to do the wrong thing.

[@xmreeves]

@@rodsdaytona You can use Reload pretty much anytime you like, as a drying aid or after the car is dry. I use reload once a month and then something like hydrofoam can be used with each wash or every other wash. All the capro products work together so don't be afraid to experiment with them. I personally use reset or Adams car shampoo then use the new Carpro Elixer as a drying aid or Bead Maker which I also amazing. Another great product I use on wheels and the roof of my range rover is Hydro 2 lite.

[@thewat3929]

Great video Brian. I appreciated hearing your input and watching your process. I'm new to this product line. I typically use Carbon Flex C9, which is a ceramic coating. I understand this is a silica based. I know C9 lasts approx 3 years, whereas Car Pro lasts approx 3 months. Does this product decontaminate the surface as a clay bar would or would you still recommend claying it prior to application with the foam cannon. On its face, I can see the benefit of going with the foam application if used for customers cars from a detailers perspective since you get more affordability and applications per bottle. As for my personal vehicle, the C9 would be the better way to go as I have less time for my own and more time for my customers. What are your thoughts? Much appreciated. Matt

[@maxfriedenberger8043]

Brian great stuff.. I will try this CarPro Hydro 2 Foam out. Looks great and easy to use...... Brian can you use this on newly fresh paint?

[@Unknown-jl7mg]

on dark cars may give highspots then use non foam spray and wipe.

[@MooneyM20J]

Great tutorial. I'm using IK 9 pump foam sprayer as well. What was your dilution ratio of water and Hydro2 foam? i'm trying to wash and protect the paint on a single engine airplane, would you think the Hydro foam would do better or Hydro2 Touch-less Silica Sealant? Is there any other product out there with easy application and maximum protection? Thank you so much for your knowledge!

[@rufascar9512]

Hi Brian, always enjoy your videos...with the bucket method 1 1/2 ounces of hyrdo2 and how much watch to fill in the bucket...two or three gallons?

[@dlj1285]

I know that this video quite old, but would there be any issues with using the new Hydro2 foam verion with every wash if you didn't care about cost? That would be my preference. The way I personally plan to use it is to wash the car first with better soap like RESET, and then foam it with Hydro2 foam just before the drying process. It's so easy to do with this foam I say why not so long as there are no issues using it that regularly?

[@jules198625]

Great video so after applyin this hydro2foam on car can i apply hydro2 sealant spray for wet surface for more protection?

[@chavezcustomdetailing9540]

Can you show us what new hose and equipment you used to upgrade your electric power washer. I think that will make a sweet video.

[@apexdetail85]

Sure... why not!😃

[@maxfriedenberger8043]

Yes Brian I bought another gun for my 2000 psi electric power washer. I love the smaller gun!!! Thanks for the input on the gun. Would like to see what new hose you have and how big it is?

[@chenhaoyang351]

Hi Brian, thanks for the review. Shall I also apply HydrO2 for an additional protection? How about the frequency for using Hydro Foam? Every 3 Months? Thanks for helping :)

[@raksh9]

I'd have to prewash with normal foam first. Spraying on the foam and wiping it with a mitt would give me the willies.

[@apexdetail85]

indeed...a clean only shampoo such as reset would work great.

[@9caplad]

I would like to try this on my RV . Will it be ok to use a soft brush on an extension pole ?

[@7071t6]

Basically the same as car pro's hydro lite 2 ? the only difference is that its able to be used in a form form ?

[@sergioarmas6689]

I wonder if I can use this product similar to Gyeon Bathe +. After the regular wash just spray and rinse, same results ??

[@kevinyoung8186]

Can you rinse with a garden hose on jet setting or do you have to rinse with a power washer

[@nurhidayat7660]

Hi Brian. Can I use any sealant like Beadmaker when it is dry after using this Hydro2 Foam ?

[@tobyhigginbotham2564]

Brian can you tell me the make of your pressure nozzle?

[@XxLaMaravish13xX]

Question: if you JUST finished compound and polish.. you have to then wet the car again to put this on right after you finished that? Correct me if I'm wrong but I've read that you don't want to wet the car after you polish it?

[@AllThingsAviation]

Why does carpro’s soaps dissipate so quickly? Using reset the suds i have in the bucket dissipates within 5 minutes... I had to use the foam cannon to lubricate the car instead

[@HazyChestNutz]

Do you have to use a wash mitt? Thought you could rinse it right away after foaming it

[@jeffredmon1188]

If I use an IK Sprayer, would I be able to rinse it sufficiently?

[@Stickymicky25]

How does this compare to the likes of Gyeon Bathe+... better or same?

[@7071t6]

should be tested via a pre washed car with no protection first and then share the results, not already protected car ?

[@marknewman2756]

Hi Brian can you help me please soonest can you tell me how much water you had in the ik foamer cheers

[@brandonmila5377]

If you use this or something like the Hydrosilex Recharge, would you still recommend using a product like Angelwax H2Go for the windshield?

[@apexdetail85]

No need....save the cash and use Hydrosilex or Wet, or Hydro to coat everything.

[@marknewman2756]

Hi do I have to wash the car with another product first. Thanks

[@Gunnvulcan]

I always get weirded out when i see you pressure washing inside your garage. I wouldn't do it unless there was a wall seperating the wash area from everything else. You've gotta be getting overspray on the surrounding area somewhere.

[@RawGreySun]

Can it be used with snow foam also in canon?

[@Darkcruzer23]

why only use it once every couple of months? is it just a waste of product to use it for regular washes? shouldnt hurt to use it too often right?

[@whitepearlautodetailing4745]

Just a question did you ever tried aero cosmetics waterless car wash? And what is your opinion?

[@apexdetail85]

Have not tested that .....yet🙂

[@jbanda896]

Is this better than the griots ceramic wash and coat?

[@3jeebx363]

Hello .. than u for the great video, would any form of waxes still be used after this shampoo or will it kill the bonding characteristics just like ceramic coating?

[@parksnrecsdetailing]

do you get any streaking or high spots?

[@TeddyGyro]

Is this safe on ceramic coating?

[@AlKidd]

I am bombarded with ads for Top Coat F-11. Is it not as good, or is it just as good, or is it better than CarPro Hydro2 Foam?

[@mynsxt6]

Forget about the F-11 crap, use Turtle Wax Seal n Shine and you will be back to thank me

[@derekharris3011]

So is there Silicone in this product?

[@kndvds1492]

What country is considered a "heavily restricted area" ?

[@porcelainplusaustralia4080]

Bryan.. with the bucket contact wash did you use 50ml into 5l of water??

[@apexdetail85]

It was the only bucket available ...at the time. I usually have a 3 gal bucket with an ounce and a half of wash solution.

[@jamesbiedlar590]

Is this like Gyeon Bathe Plus?

[@apexdetail85]

Same premise James

[@TheDeafcanadian]

Do you put mix Hydro2 and water in IK Sprayer 9 foam?

[@apexdetail85]

Yes ... just as I would a foam gun

[@TheDeafcanadian]

How much water did you put?

[@apexdetail85]

For the foamer....1 gallon...full container in the foamer...3 gal for wash bucket.

[@LightSportMan]

I did not get any form :(

[@johncover3103]

I have never used Hydro foam. About 5 years ago I started using the hydro product and initially coated one vehicle with Hydro and another with cquartz UK. These were two of my own personal vehicles so I wanted to challenge the two products against each other. Both are garage kept vehicles and our work trucks. I have been extremely impressed with Hydro and have coated many vehicles with it. What I really like about the product is it it seems to clean easier and more quickly then cquartz UK. It also appears to self clean better once a vehicle has been dirty and out in the rain. much better than a C quartz coated vehicle. Of course cquartz UK will offer far more protection but I don't run my vehicle through car washes. So when you compare the time and effort it takes to use cquartz UK and install it versus simply spraying a vehicle with Hydro it's a pretty simple decision for me. I have had Hydro provide almost a year of protection. One thing I will Notate is that I work from home and average six to seven thousand miles per year on each of these two vehicles so they're not out in the elements near as much as someone who commutes to work everyday. Thanks for the great videos Brian keep them coming!

[@apexdetail85]

Great post! Thanks for sharing!

[@johncover3103]

And one other thing worth mentioning is Ive used Hydro on a few boats as well that sit out from April - October. Get about 4-6 months of decent beading. It will make the decks very slick so use caution when walking on them and their wet!

[@apexdetail85]

I shall try it on my next boat! Thanks!!

[@johncover3103]

Apex Detail i remembeed you mentioning you were by a lake and did alot of boats and rvs. Thought I would pass it along. Give it a whirl!

[@apexdetail85]

I absolutely will and appreciate it greatly! 👍🏻

[@michaelparker726]

I don't get this!! You put say one and a half 'caps' of the gear in your bucket and then you filled it up with the jetspray, surely that makes the mix like 1: 50 ??? Don't you have to for example use one cap to 9 caps of water to make the 1:9 ratio it says on the bottle? I wont be able to spread the equivalent mix of 10 caps of mix all over the car ! HELP !! 8-)

[@kennyweaver3597]

What pressure washer you using sir and the gun your using ty

[@dragoncoold5670]

Hi, today i tryed the Hydrofoam. I put 1 ounce on the dry Wash mitt and go over the Wet Car . After i rinse it , i saw a lot Stains, can u maybe help and say why this is ? Sry for my bad english .

[@TheSecondSymbol]

Dragoncool D you left it on too long, you have to do it panel by panel. He got away with doing whole car because Hw was indoors. You have 30 seconds max contact outdoors before you must fines.

[@Alchemist124860]

What’s ur opinion between angel wax blue rinse and hydro2foam I know the hydro foam can be used to clean, but which would you say offers better protection

[@apexdetail85]

Hydro foam... slightly.

[@Alchemist124860]

Apex Detail I though as much I’m just a big angel wax fan so I had to be sure lol

[@Alchemist124860]

Apex Detail thanks

[@apexdetail85]

I am as well 🙂👍

[@richardseem7948]

2 bad A.W. doesn't make yet

[@weedie2799]

This is not the Indian man I’m looking for.

[@tompaj10]

wash dirty car and not the clean one!

[@toddk1479]

Honestly man. This is a bunch of crap. I hate to keep being the wet blanket with other detailers but come on man... just wash the car with a wash n wax between waxes or coatings. You could zip wax for the same results. This is just a way to charge folks more money and to feed ego. Detailing used to be honorable. I know that is why people do business, to make money. I could not look my customers is the eyes feeding them with this crap.

[@apexdetail85]

I have no use for it here in the shop. This is geared towards enthusiasts and driveway detailers.

[@c6z061]

You are entirely WRONG! Zip wax will NOT give the protection and hydrophobic properties compared to HydroFoam. Not even close. HydroFoam is not as substitute for a regular coating, but if applied every 3-4 weeks, it’s very effective.