Painting & Bracing the Turbo Drift Trike

Make sure to download Garage Amino at the below links to view our exclusive Predator 420cc governor removal video!
Garage Amino for iOS: apple.co/1pJ66pI
Garage Amino for Android: bit.ly/1S22iJo
Our Garage Amino username: CarsandCameras
This time, we brace the trike for more structural rigidity, we do a wire tuck to clean it up, and we finally paint it blue! Our 420cc turbo drift trike should be ready for some awesome 40mph drifting if we only had a good place to ride. We'll find a place one day. EFI coming up next!
Thanks for Watching!
Go Power Sports Website: bit.ly/3QKyODE
1" Clutch: bit.ly/3QpvKgo
Drifter Live Axle Kit: bit.ly/3Qq1fXJ
Like CarsandCameras on Facebook: / carsandcamerasreviews
Follow CarsandCameras on Instagram @CarsandCamerasReviews The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

[@oke215]

make a monstertruck go-kart that would be really awsome

[@manuelriemens3366]

yessss plssss

[@superdrizzle7342]

+luc snippe An atv w a predator engine would be cool.

[@FreeUpTheWeed]

With suspension would be cool,a crawler haha. I'm sure forks from a mountain bike could work. Just cut and make them a bit wider to fit wider wheels in and re-weld with some decent gussets.

[@JohnwayneSBL]

+Adam Loer grab a chinese kids atv and use the suspension from that, hack away and boom there ya go. could even find a beat up tav with a bigger engine and use that. perfect for a single seater

[@TheBrokenLife]

Fearless Front is building that exact thing right now.

[@LouSpowells]

What do you mean you, "Can build another trike." You've got a spare Ike too.

[@TheSchwaehn]

+Lou Spowells ayyyyy

[@Tvillright]

7:42 just me who thought the handle of the Drift trike looked like the exhaust on the Honda? xD

[@dylangxlrsm2212]

that's creepy, I thought that too!!!!

[@brandongrkman593]

Hahaha

[@adrianszugye5929]

I thought that too

[@Pollex_101]

I did too

[@jacobevans2300]

Hahaha

[@3DMachines]

Coming to a Toys R Us Near you!

[@motofriend7056]

3d your the best bro

[@brandongrkman593]

Bruhhhhh

[@magzillavlogs8086]

i ❤ you 3dmachines

[@jacobahlfs1371]

You r everywhere Roman Atwood Cassie niestat

[@codymills165]

3d machine keep ur videos up

[@DerKrawallkeks]

Oh, a little trick I did with the same problem of fuel being pushed back out (i know you'll install EFI, but just incase) I connected the overflow (-hose in my case) to the pressurized part of the intake (basically right next to the carb). This will pressurize the float bulb whenever you have boost, therefore you'll have a nice mixture and no leaks (in my case is was that easy, but no guarantee;) And.. yes, you can't run full power for more than 20 seconds because the pressure closes the float-valve...

[@VochoTalacha]

On the foot rests on the pegs, put some handlebar rubber grips or something, just to add more aesthetics and a lil grip on the feet. You guys should definitely install a rear disc brake kit to be operated either by foot on the pegs or by hand on the left side of the handlebar

[@seanhornibrook]

That is so awesome. That blue turned out like perfect. Looks like some sort of drifty thing.

[@Levi-Willis]

Hey Issac, the pressurized air box idea could work, but you would need a fuel pump pushing fuel to the carb at the same time. If you didn't there would be no way for the fuel in the tank to make it to the carb. You'd likely blow air from the turbo into the fuel tank as the float dropped. Cool build guys!

[@Pdhutchi]

It's crazy how this channel has developed, these videos keep getting better in my opinion. The content has always been great but the editing, talking points, and presentation has improved a ton. Congrats guys, keep churning out awesome videos!

[@isaacitllbefine7231]

+Paul Hutchinson thanks

[@Paxmax]

Some people don't like the "ya'lls" and southern expressions but I think it's really comforting and family friendly.

[@isaacitllbefine7231]

+Paxmax thanks

[@JamieKugelmann]

And as for the flywheel magnet, grab a normal bar magnet with North and South poles on opposite ends. There is a magnet on the flywheel (normally held in by epoxy with a screw visible on the top), it has a small gap either side of it. Put the north side of your magnet on the whole length of the flywheel magnet, if it attracts to nearly the whole magnet then the flywheel is a south pole magnet and you'll need a south pole Hall effect sensor for the EFI. If it repels, try putting the south pole of your magnet on the flywheel magnet, if it attracts nearly all of the flywheel's magnet then the flywheel is a north pole, if it repels it's south. Hope this helps!

[@SnapPunchRobert]

Great episode. Scary fast drifts there near the end. Looking forward to the EFI.

[@audictedb6466]

Shifter kart next

[@Oneshotup]

gawd yes!

[@gt1man931]

+stupid rc studio With their fab skills, they'd probably hurt themselves.

[@Mx2J]

should get some handlebar grips for the foot pegs so you have a little bit more sturdy foot pegs. :) might be a little more comfortable for your feet too

[@stephentroyer3831]

blue looks great on that trike.

[@whitecloudgroovin2005]

Looks down right fun. That skinny road tho- another trick build guys. Thanks

[@hooviedoovie5220]

the mantra of this channel... "it'll be fine"

[@Pdhutchi]

It would also be cool to see a shed update every once in a while. Not necessarily a whole video but a quick update would be interesting. Maybe you all could paint it with a CarsandCameras theme. And drop some wood chips or gravel on the swampy area in front.

[@ryanB66]

that paint job is AWESOME

[@dl-so9jj]

you guys are heading in the right direction you guys are gonna blow up soon, great job

[@redneckbryon]

What you could do is use a GM alternator to charge it while your driving and use the stock charging system to keep it charging while the engine is running, no drain on the engine and your always charging. Idea, hide the throttle cable in the same method you did to the wiring harness it would help clean up the frame a lot and there's no risk of getting it caught on anything while your driving.

[@joshsimmons2663]

I love it. This makes me want to take this old mountain bike and homemade kart at home and make one.

[@dave1135]

the polarity of the flywheel means it either uses a single magnet, like a Tecumseh, or two magnets with a space like a briggs and stratton

[@hksavage6310]

you mean a crapcumseh.

[@wabash9000]

You should take the seat plastic off and either paint it matte black or dye it black with some rit dye.

[@fcknsick]

I'm excited for more 670 videos. More power!

[@davidsuzuki5209]

Love the blue, also for a next project, I think a 670 "mini" bike would be epic, can't wait to see how the efi does on this, keep it up 👍

[@TopAnimeGuy]

so if you decide to tune the EFI yourself, what I was told about Air Fuel Mixture Ratios was that for best economy with decent power 14.7:1 is the best AFMR. Going beyond 15:1 AFMR is lean. 13.8:1 is best power AFMR, but going beyond 4,500 rpm requires a rich condition to keep from pre-detonation so a 12.5:1 - 12.8:1 is best for wide open beyond like 4k .... so just set it for 13.8:1 and it'll be fine.

[@forrestkirkendall4048]

You guys should do a hemi vs non hemi predator 212 comparison. In both parts/hardware but also performance.

[@902isfake]

I actually just removed the governor from my Honda gx340 (predator 420) your vid helped a lot

[@isaacitllbefine7231]

+b00st cool

[@MrJcoupe96]

Great Job guys, its coming along great and looks like loads of fun! Just a recommendation, maybe you want to wrap those foot pegs with some grip tape to help keep your foot from sliding off the smooth paint if your shoe were to ever get wet on the underside.

[@JamieKugelmann]

Don't forget when you install the EFI that you'll need a longer exit exhaust system from the turbo onwards so that the oxygen sensor works properly. I find if you place the oxygen sensor just after the turbo exhaust outlet it will get heated to at least 300c which is perfect for the sensor's requirements. Placing it between the engine's exhaust and the turbo inlet will make it too hot, and also restrict the flow of exhaust. Let me know if you need any help setting it all up.

[@wilberado]

If you have any satin black left over you should paint that seat. Can't wait to see that EFI kit though!

[@mr.clutchlol]

Damn Ike !!! Back at it again with the gnarly drifts 😂😍😍 this episode was great !

[@isaacitllbefine7231]

+Mr. Clutch lol thanks

[@wisdom-human3126]

GOOD JOB GUYS..TRIKE LOOKS GREAT

[@isaacitllbefine7231]

+LESLEY 420 thanks

[@MacroMachines]

I've been wanting to do a trike like that with a rear lawn mower wheel as the front wheel, or something stupidly big like that

[@jeffland1007]

ike I love the ideal of putting the pully for the alternator on the axle that's pure genius brother looks awesome can't wait for the efi I'd like to see a top speed run with put the PVC on the tires it would go faster without all that wheel spin

[@CIBERXGAMES]

I think the next build you guys should do is a very powerful electric go-kart. That would be amazing!

[@Mad-Duk_Machine_Werkes]

Two things: Along with Wire-tuck, maybe a Cable tuck? ALSO- I'm pretty sure once you do get it running better/properly with Turbo, that Crankcase breather vent-tube coming from Valve cover is going to need to be run some where other than just out int space, pointing downwards....... after enough oil builds up in the cover and ESP with Blow-by from Turbo charging a el'cheapo Foreign-made motor you will get some amount of oil blowing out of that hose...... either a catch can, OR a PCV valve hooked up running it back into the intake will be needed

[@isaacitllbefine7231]

+Eclidean catch can will do it. lol easier

[@SVWildHare]

I couldn't resist putting regular tires on it and gassing the hell out of it..

[@jasongriffin8849]

Turning out great! I would definitely do something to make those foot rest safer.

[@tylercrannell8106]

I recommend putting some rubber grips or something over the footpegs on the drift trike so your shoes can grip to them better and it won't wear the paint down on the pegs.

[@S13Egg]

Put Blow Off valve on it :D

[@MJNSN01]

the blue is nice and the trike too

[@Yohosun]

Billy crystal and will Ferrell that’s a nice paint job 🎨

[@2cwik4u104]

another awesome vid. the paint came out cool with the exposed metal.

[@learninganddiy4954]

Nice work! Looks fun and I like what you did with the gussets ;) Can't wait to see what you do next.

[@isaacitllbefine7231]

+Learning and DIY thanks

[@meade816]

Can't wait to see what EFI system you have and how it will work on a small motor. That said if you guys were working on a budget I would recommend MegaSquirt pretty much DIY EFI system without the self learning. Maybe one day someone will release a MegaSquirt that can self tune.

[@yammieboost4714]

considering its carbed theres probable not a hall sensor, what you can do is add a 36-1 pickup wheel (pretty much the standard) and it should work fine

[@luke14fleming]

I like the blue! But you should bed liner the seat black.

[@megapixel2004]

+Luke Fleming That's what I'm talking about!!!

[@rowanbauschard7609]

I want to meet you guys so bad, and i love your videos, keep up the good work It'll be fine!

[@drewkossen9324]

To be completely honest, if you had a electric fuel pump and a boost referenced fuel regulator you'd be set. The problem with the first setup was instead of fuel going the way it usually does you had air pushing the fuel backwards through the carburetor.

[@olivierbeucken6671]

Than a blow off valve would be a good idea. Now you have a draw through turbo setup. You can only place a blow off valve on a blow through turbo setup as far as i know.

[@squeezablemayonnaise8904]

7:42 looks like a huge exhaust on that Honda

[@somedude0505]

Looks sweet... how about painting the seat flat black.

[@Cool79146]

+Fabian Barraza Do This, it would look sweet

[@megapixel2004]

+Fabian Barraza For real! I think everyone wants to see the seat painted black!!

[@tylerlewis7984]

brushed silver rims would look Awesome!!

[@Addimotive]

Hey! You used the metal cast spray paint I suggested after using it on my kart! Whether or not my comment actually influenced your guys' choice, it still makes me feel good haha

[@nathanbennett3033]

I loved it when he come flying around that corner

[@isaacitllbefine7231]

+Nathan Bennett thanks

[@nathanbennett3033]

Your welcome keep up the good videos!!

[@tychoklapwijk8306]

you guys should put the boost pressure on the tank as well, that way when it hits boost, it also gets more fuel

[@doug___1jz]

This is really like the road kill of go karts which is something I always wanted

[@xSPACEGAMERZx]

"The build off is going to happen in December!" -CarsAndCameras 2015

[@shinigami1315]

Niiice! I've been waiting on an update on the drift trike. Love the vids keep it up guys

[@mat6179]

If you guys put the turbo outlet on the bottom pointed slightly down directly to the intake you will have much better results and the fuel won't pool since the outlet Is on the bottom

[@tomhuest1300]

Can't wait until you guys get the EFI hooked up and running awesome :-) :-) :-) :-) :-) :-)

[@onekick]

they make a rubber boot that can mount to the motor and then a dirtbike carb has a slide so it wouldn't pressurize the bowl. you might get a good performance range out of it too.!!!!

[@S13Egg]

What a crazy build!

[@minorpyro69]

14:20 - 14:30 .nice circle . DRIFT IT!

[@DappieKS80]

Nice! Just a suggestion, put some handle bar grips on the foot pegs.

[@cgsports2010]

You guys should build a trailer for the Rat Rod Wagon so you can haul around the drift trike. that'd be fine.

[@goesohard]

I vote yall regear it and do a top speed run once the EFI is squared away. Curious to see how fast that thing will go. Then gear it back to torquey drifting awesomeness

[@diavo009]

CANT WAIT FOR EFI!!

[@r.j.burmeister6147]

ike clearly ain't scared to die. that boy got ballz

[@Ajswindowshelper]

Finding the polarity is simple, just get a magnet that has "north" and "south" written on it and try and stick the north side to it, if it sticks welp, then your flywheel's magnet is south.

[@kohleminem]

ooohhh shots fired 6:51

[@brandonzumini2065]

oil pressure and temp gauge, boost Guage and bov. for the finishing touches then this thing would be mint

[@RastaRider]

I've been thinking about declaring a King of the Hill reference.. Based on homie's voice. But I just know it had to have been posted a bunch already lol. And yet here it is.

[@stykytte]

You need to add the rest of these videos to the Drift Trike play list...

[@suzukietc1373]

you guys probably already know but, the exhaust pipe could do with less of an angle for better gas flow, and the inlet better throttle response/power :) looking forward to efi :)

[@ClumsyCars]

You need a boost reference fuel system, but it requires an electric pump prolly.

[@MrTheHillfolk]

18:05 Why's it running so good ? Cause it's about to blow up, they always do that 😂

[@thundercamel]

11:40 "Dang it, Bobby!" - Hank Hill.

[@tracyshepard2865]

white wall tires would look awesome

[@jordanoneill82]

i reckon yall need to clean up all the turbo plumbing, just with an angle grinder and sandpaper, would look extra cool if it was chromed

[@dylangxlrsm2212]

You should definitely make a gokart with body a body kit and side, exhaust....or something on the lines of that would look amazing and different

[@blakevella2762]

Should of Painted the welds black with a brush and the pegs were your actual feet go black too would look mint. Love the steal accents too

[@jaimel4740]

great job looks good keep it up. my son and I are working on a shopping cart go cart .

[@alexsayers6979]

wow your cart looks a lot better now. Need to get a Pyrometer for carb tuning

[@silentdeath9237]

Should put a springer front axle on there too.

[@jeremyhammond2862]

Should have painted the seat matte black as well but looks good now I want to build one

[@TonyFleetwood]

its like a 64 impala man, X frame :) also blue was a great choice!

[@1981dasimpson]

Polaritiry as in magnetic pole can be found with a compass if it pulls south then fly wheel has a North Pole and vise versa

[@isaacitllbefine7231]

+David Simpson thanks

[@nathansharp2004]

loveing that blue

[@kingofmodelrailways4040]

can't wait for EFI Ike

[@danhill7525]

You ought to get some covers for the foot-pegs, maybe just some motorbike handlebar grips or something, stop the paint from getting damaged down there.

[@andre1884]

Great job guys!! Ive been watching you guys from the beginning! keep it going, and get a Turbo on that 670!!! DRIFT KART!! haha

[@briceloy5071]

That paint color reminds me of that one Roadkill episode where they painted the top halve of a car blue and traded it for a Z-32 Cavalier lol.

[@TheCaveman733]

Which episode is that?

[@TheDatpussy]

Take your go kart with the biggest motor and take to the drag strip to see how people respond with it doing wheelies haha.

[@evilpuppyjdm2702]

I think you guys should build a racing lawn mower.love the vids keep it up

[@chavabriseno638]

You guys should wrap the tubing to cover up those welds

[@Orbacron]

The carb would have never worked attached to the discharge side of the turbo because the psi entering the carb would never let the fuel reach the top of the carb jets. (like blowing in a straw in your drink the liquid would never reach the top) they work on a vacuum to create the vapor. i was curious to see the carb with extra suction and if the jets would become more efficient. im sure the carb would have become ice cold if it were getting the correct suction from the turbo.

[@wuzihuzi]

the colours look great, just like the fast and furious GTR silver and blue!

[@CarsandCameras]

+Lochlan Hughes Haha yeah it is! Thanks!

[@highboost9838]

+CarsandCameras put the carburator back to origanal place but drill hole in gas tank and run line from the gas tank to the intake from turbo side so it has same amount of pressure the whole time

[@highboost9838]

+CarsandCameras. from boost pipe to cardurator but use the boost pipe with fitting to the gas tank for egual pressure so it would be even pressure so it has pressurized carburator to make it blowthrough