Restoration of Rusty Abandoned 1966 Chevy. Full Rebuild Start to Finish. Patina Shop Truck

This is just a summary of the Restoration of the badly rusted out 1966 Chevy C10 Patina Shop Truck build we did a few months back.
If you found this video useful and would like to help support the channel, please check us out on Patreon.
/ carterautorestyling
Or you can send a donation via Paypal www.paypal.com...
#carterautorestyling #rustrepair #migwelding #classictruck #classiccar #restomod #migwelding #1966c10 #restoration #customcars #hotrods #classiccars #cars #fabrication #metalworking #automobilererpairshops #bodywork #autobody #autobodyrepair #rustrepair #car #classiccars #hotrod #behindthescenes #sheetmetal #custom #metalshaping #fabricating #classiccar #metalfabricator #metalfab #trucks #gmc #chevy #tigwelding

[@tomredmond]

Most enjoyable recap of a great rebuild series.

[@garryness7213]

What you do with something that looks beyond saving is truly amazing. I can’t wait for the next video. Thank you for sharing.

[@jamesdamron2065]

Excellent job

[@erichutchins2113]

We like your videos no matter what form they're in. Thanks as always.

[@merykjenkins3274]

One of my favourite pastimes - reminiscing with people I don't know. So many great memories, the laughs, the tears, the cats. A great result and I'm really enjoying the Chicken Truck (although Waylon's truck was full of turkeys). Keep 'em coming, great work and really entertaining!

[@ClintsHobbiesDIY]

I watched 100% of this representation of patience, determination, skill and know how. I enjoyed every second.

[@drivewayshop]

That was fun rewatching. Like watching Star Wars with no dialogue, just the music only. 😊

[@IrenESorius]

The choice of music gives a whole new dimension when watching a project like this,, 👍😎‍‍👍‍‍ Thank you soo much Kyle,, 💖🙏💖

[@John_1124]

WOW that looks super easy! I think I'll start doing it. I'm heading out to buy some sheets of sandpaper and a hacksaw. You're wonderful video has inspired me.

[@rogerpence]

I watched every step of this but couldn't stop watching this recap. What a great job!

[@CarterAutoRestyling]

Thanks Roger!

[@verity9000]

You cannot possibly imagine how much I wish I were able to do what you do. Thanks for sharing!

[@dougkinney4521]

Kyle, love this restoration. You again showed folks a rusty old truck or car can be restored. GREAT JOB

[@jerryuptmor2826]

It was fun to see that truck come together again. Thanks for the replay.

[@gymshoe8862]

I watched you do this truck earlier but seeing the time lapse video is easily as enjoyable--I really appreciate the music! It was only a few years ago when everybody used rap music without a thought! I hated it! Best wishes to you, man--you deserve a good life.

[@stevenwithanS]

The glazed over version was fun to watch. It's not like you have "agents" lending a hand, like some guy out in the Cold after a War with his Motors, lol.

[@seaneigenmann2330]

The music is actually perfect. Awesome my man, hats off sir.

[@dougtodd305]

As a 4-5-6 addict I approve this message

[@swhod2190]

It actually looks great...solid and great lines! Time lapse is a good way to watch the progress.

[@jaywebb3105]

I think you did a wonderful job. I'd be proud to own the 66 chevy. Great job Kyle.

[@65bugnut]

Thanks for the trip down memory lane, revisiting a younger Kyle, and his never ending battle with rust.

[@Don6939]

I appreciate watching you complete all the panel repairs, thanks for sharing.

[@dreamlinerkoa6438]

All kidding aside , this video highlighted your skills and talent, I can’t wait to see the outcome of the chicken truck! Something you are really interested in doing

[@janjansen2576]

I like it also the music

[@shedbythetracks]

Great Show! My only criticism is I thought there would be more focus on your hair styles during the build. I also want to thank you for broadening my classical music horizons beyond Elmer Fudd's "Kill the Wabbit" Cheers

[@glennnickerson8438]

The best Looney Tunes clasical music cartoon was the one with Elmer Fudd conducting at Cornegie Hall! That's what a love about your intro Randahl--the Mel Blanc sound bite!😆

[@CarterAutoRestyling]

Thanks Randahl! Please stay tuned for an upcoming video on the progression of my hair styles. It's so important that I wanted to do a detailed stand-alone video on the subject. Also, you may enjoy the hair restoration series that will be premiering in January on this channel.

[@christianheidt5733]

A masterpiece!!! 👏👏👏

[@screamingnighthog7155]

My father bought a brand new one in 1965. I think it was the first new vehicle he ever owned and was he proud of it. It was actually a fantastic truck. I think about him and that truck often and they are always good memories.

[@CurtisCooper-ws5jr]

I always enjoy your rebuilds your attention to detail is unsurpassed the truck turned out amazing thanks 😊

[@plainnpretty]

The Chevy trucks from 60 to 66 are my favorites. Thanks for another look at her .

[@NoName-yr1jv]

Well done 👍

[@Joe.Doucette]

Hi Kyle... Now that was fun. I downloaded the video and ran it backwards. That way if I didn't like a repair I could see it being undone! Have a good one.

[@glennnickerson8438]

Playing it backwards is what the end result of my work looks like!😆

[@Joe.Doucette]

You aren't alone in that club, Glenn.

[@glennnickerson8438]

@@Joe.Doucette 😆 In our cases Joe it's that fresh ocean air and heavy salt diet of our roads!

[@Joe.Doucette]

Well at least it's a better excuse than "I suck"!

[@CarterAutoRestyling]

Thanks Joe! Great idea to run the video in reverse! Wish I would have thought of that, un-restoration videos could be the next big thing!

[@jonathanjones1064]

Man, this was beautiful. I can't believe any negative comments that would come in. What a joy it was to watch your work this evening. Hats off, what great work!!

[@joekley5044]

Great humor.

[@realtaraharris]

Every time you post a video I breathe a sigh of relief! I'm all like, "yay I have something awesome to watch!" Thanks for all your hard work. I know editing videos really sucks bad 🫂💜

[@CarterAutoRestyling]

Thanks! The editing is a hassle, but it's all worthwhile when I hear from people who enjoy the show!

[@johnhendrix4034]

I love these 60-66 chevy pick-up. My Dad worked for Chevrolet in Atlanta, GA Lakewood Plant. Growing up He always had these awesome pick up. Love your great craftsmanship.

[@JimsIfitaintbrokefixit]

I had a 64 pretty much in the same rust condition. I bought it for $700, drove it for 20 years, and sold it to a Guy for $350 that used it for a parts truck. It was still running and driving great. It was my daily driver for most of those 20 years.

[@kc5gym]

Absolutely astounding! and even more so, to know that it was all accomplished with the soothing musical passages performed by an orchestra. Orchestral passages. Soothing. Astounding. Kitty cats.

[@user-dl1mh6hf3j]

I loved the classical music!!!

[@phooesnax]

Looks pretty great!

[@Telephony954]

I had forgotten how extensive on this one was. Nice Kittens.

[@rushlimbaughrules]

You do great work. You’re very patient with the welding and heat input from welding.

[@davidw.powell6]

Really enjoyed that. You make all that welding and cutting look so easy. I am jealous.

[@skylinegtr-gd2lg]

i forgot your "self-install" demo/instruction for door & rocker-panel from the earlier videos . . . a great labor time-saver for sure - - - others would be wise to employ this technique. Ciao!

[@rogerdumais7637]

Doing a great job keep up the good I enjoy watching you put the trucks together

[@tjoeriebotha7029]

I am from NAMIBIA and really enjoyed this Video!! Keep it up and God Bless!!

[@TCW-hw6iw]

Great recap of the C10. Got a kick out of the fast forward mode of the truck repairs then the sudden switch to the slow mo of the cat's jump. Nice change up. Cats love their cameo's.

[@samkidd2320]

Looks good to me, excellent job. No negative comments from me

[@greggonzalez7396]

Great video of detailed repairs.

[@blah666]

Between the tears and sitting on the edge of my seat... You sir, are the Hitchcock of KZbin videos!

[@michaelsidhu4079]

That truck looks so much better with that primer removed. Makes you wonder why on Earth did the previous owner paint over the original colour?

[@EdOfTheNorth]

You always do such an amazing job of chasing the cancer. You are one impressive surgeon. Canadyen Eh! Me too! Thanks for the video from Ontario. She's old and decrepit but she's cancer free. Praise God!

[@gordonbrooks3856]

I owned a 1965 1/2 ton for 18 years. Yanked the 235 - 6 for a 307 small block from a 71 Nova and replaced several short tail three speeds. Seeing this breaks my heart. But Iit was an East Coast truck, and salt had done a number on it, and I didn't have the capability or resources to fix it. Bought it for $800 in 1970 and s9ld it for $800 in 1988. Thank you for this.

[@danbentsen]

Good watch. Truck should run many more years.

[@lakesideguitars]

Great job 😊

[@kennethstaszak9990]

With the way you were able to match the speed of the video with the musical pace I'll bet you were a gold medal winner in synchronized swimming at Saskatoon Tech!

[@billleigh615]

Had already forgotten the amount of work you put into this. Good job the doors weren't rusty or else it'd be up for the full body section too!

[@CarterAutoRestyling]

Thanks Bill!

[@glennmiller9031]

Nice truck Kyle. Good job. You work fast.

[@dellhart7076]

I had a 64. Thanks for the resurrection.

[@thomaslatham1956]

Your doing a awesome job on this truck keep up the amazing work 😊

[@trevorbarlow2705]

Loving what you are doing. I wish I had the time to do what you do. Keep building, and I'll keep watching and liking. Trevor. Down here in Australia,

[@Deuce-eq4mv]

You did a great job that truck is beautiful thank you for bringing her back to glory she deserves preservation she will give you many years of faithful service

[@gordonsmith935]

Dude , you are a sheet metal expert!

[@cantarockinter]

Very cool, congratulations!

[@JimsIfitaintbrokefixit]

Frame looks good.

[@TheCrackerBox]

Thanks for another great video brother !

[@billchristopher8892]

Can’t get enough of your work I’m a 75 year old rock and roll music lover but I find your background music is very relaxing keep on keeping on

[@jamesstrickland228]

This never gets old. Thanks for this content and for giving this truck a few more years! Awesome job!!!👍🇺🇸

[@micseph6186]

Start to finish. Again nice music to action compilation.

[@DangerousSportsForSeniors]

I remember when they kidnapped the music director, and I could choose my own music. Great video, as always. Thanks again for sharing

[@rudybriskar5267]

You are seriously talented! That truck is ready to take it to the next level!

[@robray6408]

you just keep doing what you are doing.

[@ernestfinch1578]

I like the classical music , and the sweet cats .

[@PeterGriswald]

Great job with this old gal. And your choice of music is awesome!! Nothing like the Czech Philharmonic performing Serenade for Strings in E flat major! I'll bet not too many of your viewers got that one lol.

[@DRpokeme]

I didn't get either, but thank you for the information . Very relaxing, Beautiful work, beautiful music. 🇦🇺🇦🇺

[@robert6g6]

Disconnected the battery to prevent the computer from being damaged. Thumbs up! (haha!)

[@user-vr4pf4dd5b]

Great work. Love the leaving of the majority of the vehicle to the Patina. Even the straight 6 sounded great. Love that body style

[@TheDocrock100]

Outstanding job on that truck. I would buy it if I was near you

[@anthonyshelton6786]

great work on the 66 made that a Solid truck glad I watched because I clearly missed one of the Videos on it from snap in half to solid build project of throw a weekend at it and have a great driver

[@neilangus4401]

I don't think there is a vehicle he couldn't restore He's absolutely brilliant

[@terje6810]

Thanks Kyle, I run a body shop for many,many year, but not so mutch rust that you take on😀 I am 75 now, so no more weldig for me,but I new how good you are in you work.... see you !

[@rockypergin2216]

Love the documentary on your madd skills! I genuinely enjoy watching

[@rockypergin2216]

But I skipped ahead a little bit, just owning it! Because I watched all the videos

[@SlamboKassel]

I very much appreciate the classical music. ‘Tired of the standard “techno-beep-bop-boop” or rock-n-roll. I thank you for allowing me to maintain my sanity. Great job!

[@thomaswhite3831]

Looks good , seat is in great shape .

[@paulerickson1906]

Love them old trucks. Especially when their treated so nice.

[@phatdaddy1955]

I'm very impressed by your ability to create a 66 from a 52...3...1...uhhmmm. wait.what? Different truck? Jeeze...forgot my meds again. Anyhoose, thanks for the recap. She came out great!

[@ellisbrown7313]

Nice job liked the music to form the other side of the pond

[@darrylowens9298]

It looks much better to me ! Lots of people like them this way.makes me think of my uncle Toby. He painted cars for a living and loved Chevy products. He always said , ‘don’t ever use a straight six Chevy engine’. He would get one and immediately throw it away….. I think a small block Chevy would really put this one over the top big guy.

[@boblister665]

I am welding a rocker panel on a 64 after lunch. Did the inner and floor support yesterday

[@scottwren6106]

I find it amazing that you remember how it all went back together

[@user-hw4wv5vz9r]

Awesome fabrication.

[@jukemove]

Great job. i'd take that truck in a minute.

[@mikearmstrong9455]

I'd love to see more videos on this truck. Get it back to show room nice.

[@garykerkstra1067]

Kyle, you have to be the luckiest guy in Canada. You have managed to not only find, buy bag the most coveted vintage Chev trucks in the Northern Hemisphere , the few that have the retro fitted optional rocker panel/outer floor panel flow thru ventilation package. Amazing.

[@RaysLaughsAndLyrics]

True.. rare, early Astro Ventilation option.

[@debstevens-tq5iv]

I also had a 63. I bought it completely redone except the fuel system.I changed it to an electric fuel pump with a bypass filter to prevent vapor lock. That worked well.Mine had been updated to include power disc breaks, a Clifford 6=8 manifold with dual headers. It had a new electronic distributor and Edlebrock 4 barrel carb on the 262 straight six. It would do 75 but that was pushing. It loved 55 mph. I bought it for $12,000 and sold it for $18,500 two years later. Looking for an late 54/ early55 Chevy or a Willys pickup. I also has a 52 that I redid and drove for thirteen years. I wish I had that one back. Thanks for your video.😊

[@russdavis1960]

NICE!!!

[@wirefeed3419]

Watching this restoration was like watching a live performance done perfectly in C10 Major.

[@todstrucks2919]

I have a 66 short bed stepside been sitting for years time to get started. Thanks for the video.

[@johnclendinning1189]

You've got skills! Thanks for sharing

[@johnanchovie2b]

Nice to see someone driving and fixing a car that is a bigger shitbox than the ones that I run and drive!

[@lucsurmon2623]

Great job indeed 👍 👍 (and good music too)

[@haydnpearce]

I take my hat off to you sir well done

[@ronnietalarchyk-kh3pq]

Hi,The content was Awesome!You are a master at your skill.Keep up the Great work.Greetings from New Jersey everyone.