No video

Cartridge Pool Filter Cleaning Step by Step Video Guide

  Рет қаралды 39,760

Swimming Pool Tips, Reviews & How To - SPL

Swimming Pool Tips, Reviews & How To - SPL

Күн бұрын

Cleaning a cartridge filter is a pretty straightforward process. Each is a little different but the general principle is the same. Below are some links to the tools shown in the video.
Turn off the pool equipment: Before starting the cleaning process, turn off the pool pump to ensure safety and avoid any accidents. Make sure the pool is not going to turn on and if you are unsure just turn off the breaker to the pool pump.
Release pressure: If your pool filter system has a pressure relief valve, use it to release the pressure inside the filter. You can also simply relieve the pressure by removing the drain plug on the bottom of the filter. I suggest this method as it will also drain the water from the tank.
Open the filter: Depending on your specific pool filter model, remove the locking mechanism or unscrew the top of the filter housing to access the cartridges inside. For the quad-type filters, there is a clamp held on by a Spring Barrel Nut.
Remove the cartridges: Carefully remove the cartridge elements from the filter housing. Take note of their orientation so that you can put them back in the same position later. Most cartridges will be marked with the word “Top” on the top.
Rinse off loose debris: Use a garden hose with a high-pressure nozzle to rinse off loose debris and dirt from the cartridges. Direct the water from top to bottom and make sure you get the pleats completely clean.
Inspect the cartridges: Take a close look at the cartridges to ensure there are no tears, holes, or damage. If you find any significant damage, it's best to replace the cartridges.
Reassemble the filter: Once the cartridges are clean and dry, carefully place them back into the filter housing, making sure they are correctly oriented as they were before.
Close the filter: Securely fasten the filter housing, ensuring there are no leaks. Apply silicone lube to the o-ring to extend the life of the o-ring and to prevent leaks.
Turn on the pool equipment and open the air relief valve: Once everything is reassembled and secured, turn on the pool pump and check for any leaks or abnormal pressure readings. You want to open the air bleeder/ air relief valve to remove any air from the tank.
I suggest cleaning single cartridge filters every 30 days and the quad-type 4 cartridge set up every 4-6 months.
Blaster Silicone Spray:
bit.ly/476Ttu2
Orbits Nozzle:
amzn.to/3rLTXWo
Multi-Tork Filter Socket Tools:
multi-tork.com/
Cyclone Tool:
cyclonefiltert...
Visit my Website: www.swimmingpoo...
eBook: www.swimmingpo...
KZbin Video Index: poolmandave.blo... - A list of all of my videos.
Blogger: poolmandave.blo...
Facebook: / swimmingpoollearning
poolguycoachin... / mrdgvb1
Join me on Patreon: / poolguycoaching
Podcast: www.buzzsprout....
Podcast Website: www.thepoolguy...
Coaching Site: poolguycoachin...
Shop at Leslie's: Leslie’s Pool Supplies has been a do-it-yourselfer and pool trade professionals' trusted partner since 1963, providing quality products and services to make pool care easy and solutions and expertise to do it right. lesliespool.com...

Пікірлер: 39
@ChristIsRisen777
@ChristIsRisen777 11 ай бұрын
I really enjoy & appreciate your videos. Very informative; you take your viewers through a simple step-by-step process. You're amazing, bro! Mahalo! 😎🤙🏽
@capturedmoments5024
@capturedmoments5024 11 ай бұрын
If your not getting wet your not cleaning them right that's what another pool guy told me about cleaning cartridges kind of true
@mimiwm2155
@mimiwm2155 5 ай бұрын
Great video! Thank you. I have been using channel lock and it takes so much time to unscrew it. I have a Pentair Clean and Clear Plus, I can't hold the pump strap and close it by myself : / it's just too heavy LOL
@majorh270
@majorh270 5 ай бұрын
Dude. This video saved me so much money. Thank you.
@David-jn4fx
@David-jn4fx Жыл бұрын
You are always amazing man! Thank you for the view 🤩
@alcontv4133
@alcontv4133 3 ай бұрын
I have a lot of trees in the back,i mean really alot. So I am alway fighting pollen and algae in the water. I washed the filters really good but the insides of those flaps or whatever they are called always seems to have some sort of film. It would take me a long time to use a fine brush or something to clean all that. Is there a chemical or something to use instead? Water alone is no doing the trick. I even filled up a bucket with water and chlorine and left the filter in there for a while,then rinse and did the other end because off course the whole filter doesn't fit inside a bucket. That didn't do much either. The pressure is not what it used to be. Any help will be appreciated. Thanks
@erickrhernandez1451
@erickrhernandez1451 Жыл бұрын
Wow. I never thought about using magic lube on the bolt and screw.
@speedracerjeff
@speedracerjeff Жыл бұрын
I use lithium grease spray on the threads.
@marcusluna4238
@marcusluna4238 Жыл бұрын
Question we seem to always be battling high phosphate in our pool even with using perfect weekly. After a treatment of NoPhos we noticed the filters to have a milky colored residue when we cleaned the filters. This was a first for us. We have treated with NoPhos before what the filters weren't milky and hard to get cleaned. We just purchased from Leslie's the Pleatco Pool Filter Wash to soak the filters in on the next cleaning of the filters. What causing the milky colored water? We've had the pool since October 2022, so this is out first summer with a pool. We live in the central valley here in CA, and staying up with chemicals during the summer ain't no joke! Really enjoy your channel.
@SPL
@SPL Жыл бұрын
It's normal when phosphates are high to have this milky byproduct. Usually it is fallout dust on the bottom that gets into the filter. I suggest reducing your use of the phosphate remover. Clean the filter and add a PoolRx to the pool or add borate to 50 ppm.
@rickyg4185
@rickyg4185 10 ай бұрын
Thank you! Your channel is definitely growing! Question, do you use chemical clearner on the filter besides just washing with water?
@SPL
@SPL 10 ай бұрын
I use just water.
@tbone4075
@tbone4075 Жыл бұрын
Great video and I’m about to clean mine soon. How often should this be completed and do you recommend a cleaner or just spraying them down is fine?
@SPL
@SPL Жыл бұрын
Just water in most cases. I rarely use a degreaser.
@erickrhernandez1451
@erickrhernandez1451 11 ай бұрын
How do you backwash a cartridge filter? Did you create a video on this topic?
@SPL
@SPL 11 ай бұрын
Can't. No backwashing.
@erickrhernandez1451
@erickrhernandez1451 Жыл бұрын
Would you happened to know how to increase the water pressure from the property to have better cleaning results? Some of my clients have poor water pressure
@SPL
@SPL Жыл бұрын
Not much you can do except try this nozzle.
@erickrhernandez1451
@erickrhernandez1451 11 ай бұрын
Can I get this nozzle at a Home Depot or pool supply store)
@JP-ku3he
@JP-ku3he 5 ай бұрын
Is there another way to tell witch us bottom? Because no marking at all
@SPL
@SPL 5 ай бұрын
In your case it might not matter if the parrrern is the same on both ends.
@krayzie5968
@krayzie5968 Жыл бұрын
I have a pentair clean amd clear 420 sqft filter. I got it brand new about a month ago and it keeps the water clear. I do keep having an issue where debris keeps coming back into the pool when i vaccuum, Is this normal for cartridge filters. Its pretty annoying and is making me regret getting this filter. I had an old de filter before and didnt have this issue of debris comeing back into the pool while vacuuming. Any input would be super helpful
@SPL
@SPL Жыл бұрын
It could be that the top manifold spring is not touching the top of the tank properly and when you vacuum the added pressure is causing a gap to form. I would take it apart and inspect the components carefully. It should not do that.
@krayzie5968
@krayzie5968 Жыл бұрын
@SPL thank you for the reply, I took it all apart and cleaned the cartridges while it was apart. I made sure everything was seated well when I reassembled it so hopefully that's all it was.
@rayolivarez1202
@rayolivarez1202 3 ай бұрын
Where you get the drill bit and size… and multi tool where can I get one 3:03
@SPL
@SPL 3 ай бұрын
Multi-Tork.com
@billydanzz
@billydanzz Жыл бұрын
What I like to do is place the cartridge I'm spraying directly in front of the other cartridges so that any overspray from the nozzle is hitting the other cartridges....sort of pre-cleaning them until they're next up to be sprayed. Not a drop of water wasted. lol
@SPL
@SPL Жыл бұрын
Great tip! 👍
@blackhouse7646
@blackhouse7646 4 ай бұрын
Can i soak them with Trisodium Phosphate or bleach overnight?
@SPL
@SPL 4 ай бұрын
I would just spray them with a degreaser if anything.
@blackhouse7646
@blackhouse7646 4 ай бұрын
@@SPL do you recommend any? Would bleach do anything bad to the filters if i soak them? My pool builder turn our pool on before we put the concrete around the pool so my filters have this brown color no matter how many times i clean them.
@dbsimms63
@dbsimms63 Жыл бұрын
The button hook sucks. I bought one to remove the plug on of my Pentair Clean and Clear. The angle isn't really sufficient to put adequate pressure keeping the tool engaged while trying to remove the plug. I'll also admit Pentair 's design is horrible placing in such a hard to reach and awkward position. The easiest way is removing the inlet and outlet couplings and turning the base upside down to thoroughly clean it.
@SPL
@SPL Жыл бұрын
Worst location for sure!
@speedracerjeff
@speedracerjeff Жыл бұрын
The Pentair drain plug design is the worst. I don’t even take them off anymore due to them stripping so easily and possibly leaking when you put them back on… I just carry a Wet/Dry Shop Vac and suck out the debris out of the bottom, quick and easy.
@itsandrew8758
@itsandrew8758 11 ай бұрын
Use a ratcheting wrench 🔧 7/8 for Pentair drain plugs. Thank me later lol
@kimberleybillewing4899
@kimberleybillewing4899 3 күн бұрын
@@itsandrew8758 Pentair C&C 520 is very difficult to remove plug. I use a shop vac to remove excess water and debris from the filter tank.
@itsandrew8758
@itsandrew8758 3 күн бұрын
@@kimberleybillewing4899 I always remove them with no problem but I have heard about pool guys vacuuming out the water instead. I just don’t want to carry a vacuum
@chrism8013
@chrism8013 Жыл бұрын
Yikes, those filters are disgusting. How long was the cleaning interval??
@SPL
@SPL Жыл бұрын
Only 5 months. Tons of rain here this year so very dirty.
Hayward Cartridge Filter Cleaning
36:43
Pool School
Рет қаралды 140 М.
Incredible Dog Rescues Kittens from Bus - Inspiring Story #shorts
00:18
Fabiosa Best Lifehacks
Рет қаралды 33 МЛН
Gli occhiali da sole non mi hanno coperto! 😎
00:13
Senza Limiti
Рет қаралды 24 МЛН
How to Clean a Pool Filter Cartridge | Leslie's
4:55
Leslie's
Рет қаралды 435 М.
How to Maintain and Service A Swimming Pool: A Step By Step Guide
6:32
Swimming Pool Tips, Reviews & How To - SPL
Рет қаралды 332 М.
How to clean the pool filter?  如何清洁游泳池过滤器?
19:36
Cteacher001 in America
Рет қаралды 3,6 М.
How To Clean Your POOL FILTER (Cartridge, Sand, D.E.) | Swim University
8:57
How To: Identify and Correct Low Water Pressure
5:18
Inyo Pools
Рет қаралды 358 М.
Top 5 MISTAKES When Vacuuming Your Pool!
6:17
Hallmark Pool Supplies
Рет қаралды 288 М.
Why are there Air Bubbles in my Pool? A Troubleshooting Guide
7:55
Jason Hughes
Рет қаралды 2,2 МЛН