Рет қаралды 41,057
Carve a Tapered Hole in Vectric VCarve and Aspire
More down here ↓↓↓ Click SHOW MORE!
In this video, I’ll show you how to carve two different styles of Tapered Holes in Vectric’s VCarve and Aspire software.
I’m going to demonstrate what dimensions you need to know to use the Moulding Toolpath to create a tapered hole, and how to figure out those dimensions. Next, I’ll demonstrate how to create the vectors to establish the boundary vectors and the profile. Then I’ll show you how to calculate the Moulding Toolpath and a Pocket Toolpath to cut the tapered hole through the piece of material. Finally, I’ll show you how to modify those vectors to create a tapered dish/bowl interior, instead of carving all the way through the material.
As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.
On Sunday, January 24th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. I hope to see you there!
Here’s a link to the Live Q&A: • LIVE Q&A #75 - Carving...
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, you can donate by using any of the following links:
StreamLab : streamlabs.com...
PayPal: paypal.me/Mark...
______________________________________________________________________________
Link to The Trampled Underfoot Podcast. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..."
KZbin: / @trampledunderfootpodcast
Facebook Page: / trampledunderfootpodcast
Past Episodes available at our website: trampledunderf...
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: • Vectric for the Absolu...
Link to the 3D Modeling for the Absolute Beginner playlist: • 3D Carving for Beginners
Link to the V-Carving for the Absolute Beginner playlist: • V-Carving for the Abso...
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
marklindsaycnc....
I’m a proud founding member of the Maker’s Media Network.
Come check us out at: makersmedianetw...
marklindsaycnc.com is sponsored by Harneal Media - a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com/
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
www.vectric.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Aspire #VCarvePro #Tutorial #Beginner #NotSponsored