Carving Two Tables to Make $1000

[@nicholasem100]

Just wanted to follow up on this post. I watched this video when it was first released and posted that it motivated me to give it a try. I’m happy to report that I made a pair of these tables and posted them to Etsy. They sold yesterday after being on there for about a week and a half. Thanks for the motivation.

[@BlacktailStudio]

Boom! Love that man. Keep rocking.

[@pogstyle1833]

Do you mind sharing what your cost ended up being and what you sold them for?

[@nicholasem100]

@@pogstyle1833 I followed the info in the video almost exactly except my wood cost was a little more. spent about $200 on the walnut and I’ve got enough left over to make a nice cutting board or two. $50 for a small can of Rubio. I paid for shipping which was about $200. Budgeted a dollar a day for Etsy ads which ended up being about $10. They sold for $1,200 plus tax.

[@Craigkelso9187]

I just want to use a 10k bandsaw

[@pogstyle1833]

@@nicholasem100 Awesome… thank you for the info, I look forward to attempting the same success

[@jerwinsalo5929]

Love this book! kzbin.infoUgkxpCNxqmAkyjN6NPx1fyB7QiEFWyO5mUWL it is simply one-of-a-kind! I really love it, because karah explained all tools required to have the job done, not mentioning the fabulous diy pallets ideas. I'm pretty sure this will be a fresh start in my new endeavour. Amazon was great, they delivered on time. Thank you!

[@milod3428]

It's really nice to see someone talk about the business aspect of woodworking. It adds a level of realism and motivation that is much appreciated.

[@JayDee-xj9lu]

I agree. I'm setting up a new workshop and I've made a lot of things for my self and occasional a cupboard or kitchen etc for a customer. But going into retirement you've given me incentive to make more furniture as a side earner. Thank you. I love working with wood and steel.

[@growingreens34]

Hi, ceramic wheel turner here- in addition to cutting a "foot" ring into your base you can also cut it into three sections. Three feet is the most stable and reduces wobbling. Love your videos

[@toyorover1313]

I was thinking that would be a good way to disguise the spot where the grinder got away from him

[@eggsngritstn]

Yes, I would have simply glued three quarter-inch discs to the base to make it stand on "feet" that you can't really see. Works for me.

[@joesmith1574]

That’s why the Amish make three legged candle stands, it’s the most stable.

[@drucker03]

@@joesmith1574 Yes, because three points define a plane in geometry.

[@GrandOldDwarf]

"All those tools. Must be nice." You: "It sure is!" That's the perfect response dude. Yes, it is really nice to work your tail off and get the really nice tools. If this is your passion, if this puts food on your table, then invest in it!

[@grim-upnorth]

I've had comments like this too. I'm not a woodworker or carpenter, but I build RC planes/drones. After over a decade of doing something you're passionate about, of course the skill, experience and tools build up. There's no way I could build the machines I do today, with the tools and skills I had 10 years ago. Do I find it easy now? of course, but for me the journey was the adventure and I'm always willing to learn more and invest in tools that can make things a lot easier.

[@indracaponious]

Apparently, it puts food on the table, HE made, to put food on the table.

[@J-dizzle2021]

Amen to that Steve. 👍

[@KLP99]

In this case, it puts a table under the food...

[@Wuffman]

I would think this project would be possible with hand tools, if needed. Hand planing the top, rough shaping with a hatchet and scrub plane.

[@Kojo2047]

Regarding "water-popping" the grain: I've tried skipping it when I work on my cutting boards, and it DOES make a difference. It's not that it sands any smoother initially, but it prevents the grain from popping days or even weeks later when it absorbs humidity. The idea is to preemptively pop the grain while you're already sanding so you don't have to re-sand it later. I live in a desert but I still get enough moisture that I can feel the difference between pieces I did and did not wet. Hope that helps!

[@sparkyenergia]

I'm a novice. So far I've combined this step with the first coat of polyurethane. Do you think I was right or could I do it better?

[@christophermhudson09]

Water popping? Shoot I must have been paying attention to traffic and missed that part .... Smh I gotta get my priorities straight

[@EYELEVELAwakening]

great comment thank you....knowing the why makes a difference

[@dazzaco6734]

the vast majority of wood turners I know use denatured alcohol (methylated spirits in Australia) for the same reason.

[@JayBates2]

“Whether you think you can, or you think you can’t - you’re right.” - Henry Ford

[@BlacktailStudio]

Love that one

[@frogsoda]

You beat me to it.

[@myxfit]

One of my favorite quotes. That's what I always tell people when they ask about learning to ride a unicycle :)

[@pokry5]

The legend has entered the chat

[@onehitta7892]

Garbage quote. Not everybody can do something that they think they can.

[@wjhmsme]

Cats to own, dogs to live next to. Beautiful tables and great response. I sold off a lot of my large tools when I made a cross-country move. I miss them but if I am being honest I had more ambition and tools than I had talent. Starting simple and getting good with lesser tools makes you a better woodworker in my opinion. I am slowly getting back into it and I might give a couple of tables like this a shot. Great video - thanks very much for the instruction and inspiration.

[@Rezornch_and_Dvelenktronx]

Yep! Milwaukee 18volt has enough to do almost anything… …maybe even Ryobi if you’re smart with techniques…

[@granthattendorf7372]

I’m 21 and live in an apartment, I do most of my woodworking on my balcony, so there’s no excuse if woodworking is something you enjoy. This is my favorite type of video since it’s more affordable and tangible for someone like me. Great work, and I love all the content!

[@Blayda1]

keep at it !. One day a balcony , next it will be your own small holding. Onwards and upwards.

[@whatthedeuce47d68]

Yeah I also do my woodwork in a flat, except I use half the dining room because I don't have a balcony, my wife occasionally takes issue with it but she's all better after I've finished making something useful for her😂 Excuses are exactly that, excuses!

[@michaelvonneupert]

Lol, your poor downstairs neighbors... Still, keep at it!

[@bbbbbbb51]

Definitely recommend getting a garage unit if there are any available at your apartment.

[@adrianharris1592]

I've been working as a cabinetmaker for a couple years now and started to forget why I got into this industry after making so many kitchens and not taking the time to build projects that actually excited and challenged me. But this has been a very inspiring video and has lit that creative spark in me and I cant wait to get started and give it a shot cheers mate

[@santosdr2]

thank you for being inspired. I think handy work in this era to come is going to be mighty fine and in demand. people are tired of the cheap impersonal products. hand crafted and made with love and effort of the craft is going to be in more demand. A resurgence of quality products built by people that are skilled. I just feel it in my bones. People are wanting more out of life and we get more out of life when things are built with care.

[@cobalt6452]

Your videos have helped me get over my paralyzing “I can’t do that!” attitude about woodworking. Not creating my own pieces, but happily fixing stuff around the house (including cabinets and furniture). Thanks, Will Forte!

[@GabrielKerr]

This channel is just fun to watch. I live in an apartment and don't really have the capacity to do woodworking, but it's definitely nice for the time being to live vicariously through this channel! Keep up the good work! Oh, and I'm a dog person all the way.

[@nelsonreyes8808]

Try a makerspace if you can, they're special places.

[@carlcox7332]

There's a maker space here that I just found out about. It's only 75$ a month and they have metal shop, wood shop, electronics and even an industrial sewing shop.

[@orazha]

You don't need to have the capacity to do woodworking in most places (in the US). Community colleges, community centers, non-profit membership shops, etc are available in most communities around the US. I haven't checked out the website that Blacktail Studio mentions but it sounds like a great idea. I was a professional woodworker for several years in my early years. Since then, I've continued woodworking using the above mentioned places. I do have my own handtools and small power tools that I take with me to these shops to avoid the inevitable problems with poorly maintained equipment. I've lived in many small communities around the US and have never been in a place where there wasn't such a shop available. I'd encourage you to take advantage.

[@tommanseau6277]

If you are willing to work with hand tools, then your kit can be shockingly small and your landlord and neighbors might not even know you're working. Typically a lot less noise & dust. I've seen several woodworkers make it happen on an apartment balcony. For a small project or one off a hand tool kit is often faster than trying to set up a power tool to make something. Power tools are great for lots of repetitive tasks which offsets the time used to set them up. Hand tools are amazingly efficient once you understand and develop the skills how to use them.

[@sheelshox345]

Cats all the way I was firmly in the "I've already got a job and I don't want woodworking to become another one" camp, but this video is making me reconsider. Two or three sales like this per year would go a long way in subsidizing my hobby. Thanks for taking the time to make this video!

[@goodwyrd10]

For real... This was one of the first projects that i can confidently say, "yea I can do this and could sell it"I just need to do get up and do it haha

[@abydosianchulac2]

@@goodwyrd10 Totally; this is a more advanced version of the lazy Susan I made my Dad for his birthday, but not much more advanced. I have all the tools I'd need for this except for those making the mounting disk.

[@goodwyrd10]

@@abydosianchulac2 and the mounting disk is just one option. I use those figure eight clips for mounting table tops . They're super cheap and accomplish the same basic idea

[@chasecreange4449]

Cam is right; and he’s awesome, but I gotta put in my two cents. I definitely think it also depends on where you live and the cost of materials. For shits and giggles, I just priced the materials for this project, from where I live. The wood alone would cost me $220 and then something like Rubio monocoat is around $40 for a small container. If I used epoxy for the glue upon bottom, that would add another $50. This project would easy cost be over $300 right now. That might be easy for someone like Cam, who’s got the funds for it, but a guy like me (even though I have a lot of great tools) who is barely making it by right now…. I couldn’t afford to spend that much money not even knowing if they’ll sell or not. Hopefully its cheaper where you live.

[@DamirS2K]

I just wanted to say, I love your response to that comment at the end of the video. But honestly, being someone who does woodworking as a hobby and a side hustle, the tools come as you go. Start with the basics and work your way up. Its not going to be instant but you can slowly make some sales and eventually pick up some of the more critical tools to better your product. Oh and I prefer the voiceover. I don't understand why people complain about that.

[@JohnsJunk]

I like it when people say "must be nice" like they think you hatched fully formed with a full shop and client base. Hard word and sacrifice aren't in their lexicon. Or as my buddy Jake says: It's amazing how luck looks like hard work paying off.

[@Person-sq3xz]

That is an amazing phrase and so true.

[@robmcgrath5202]

Neil Peart from Rush wrote in Roll the Bones: "Good work is the key to good fortune Winners take that praise Losers seldom take that blame"

[@JohnsJunk]

Don't base what others are capable of on what you aren't.

[@phredrocks]

2 dogs and a cat! Very nice small tables. Love the finish. Simple elegant and beautiful. Thanks for sharing with us.

[@danhenck3379]

Both dog and cat, those end tables are phenomenal! My father taught wood working for 24 years. So great to see someone as skilled as you!

[@PoserExtreme]

Some people are just salty that others earn money doing something they love. Keep crafting, Cam, I really love watching your videos, it's relaxing. Maybe someday I'll start woodworking too.

[@euroman12000]

No, actually some people actually want to see skills, creativity, math, precision etc, this guy has bunch of instruments, fills wood with epoxy and is a mediocre hobbyists, congrats, $5000 table lol. No one cares to listen about money all the time, not real craftsmen...and he's an apologetic snowflake

[@sirnuggets9666]

hell yeah I'm salty, dude was making $100/hr making some fucking tables, while I'm over here working in a state of the art hospital laboratory as a technician making less than 1/6th of that per hour. Dafuq am I doing wrong when people who carve wood make more than people who save lives and run million dollar instruments.

[@euroman12000]

@@sirnuggets9666 You would get it, it would just need much longer explanation for you specifically

[@TadaOU]

@@euroman12000 jealousy is a sickness

[@sirnuggets9666]

@@TadaOU not jealous, i'm pissed at society. There's a difference between being jealous of someone making more than you and wanting a living wage

[@VoidDesign42]

I'd love to see another video on selling these types of projects, that focuses more on how you go about the packaging and shipping process. I feel there arn't really many great videos on the subject that go into detail of how to support/ protect the piece so it doesn't get damaged during shipping.

[@isaacalvarado1643]

Dog, I would enjoy as well.

[@CMTechnica]

Fully support this idea right here

[@theblackandwhitecate]

Cat and dog. I also would love to see a video with information on shipping, packaging, and what shipping companies you use.

[@michaelplagerman2760]

Yes to this one!

[@SeanD313]

Add me to the list! That would be a very useful video!

[@elvispusley3515]

I like dogs, cats, and dirt bikes, my kids, my wife and whitetail deer hunting. I build stuff out of steel. Came across your vlog one morning and like to see people that create with their hands and mind. It is a gift to be able to do so. The best of the best are the most humble people. Rock on

[@drewstinson5729]

I am neither a dog or a cat I'm just a beginning wood worker. Just recently found your KZbin page and really appreciate the stuff that you're doing. Never considered myself someone good enough to do the carvings like this but after watching what you did I think it's pretty dang cool and I'm more likely to give it a shot now. Thanks again for what you do this is awesome.

[@serebriany]

As a dog lover, and a huge fan of seeing projects come to life, I really appreciate all of the detail work you share and show! Thanks for the inspiration.

[@priyanirgude8017]

I like how you say how much stuff costs and what it sells for and how long it takes. As an armchair woodworker I have absolutely no idea but these are the first questions I ask, so thanks!

[@danemclaren5678]

What kind of armchairs do you make?

[@stonescapelamps]

@@danemclaren5678 ha

[@JimmyHeller]

I'm a wood lover and I never thinking to do stuff with wood myself. but I liked the fact that you encourage people to start their own shop and just do!

[@michaelplagerman2760]

My two cats are my shop companions. The three of us just bought a new drill press with the extra money we made doing exactly this type of thing in our small shop. A hobby that more or less pays for itself sure is a nice thing. Beautiful work as always!

[@Guccic1234]

Sir, I absolutely love how you put what you did along side the alternative. I am basically a weekend warrior but I have a lot of the tools. So this is very interesting to watch.

[@lanceb1980]

I just found your channel, watched several videos. I really like the talking and explaining. It also shows me why good furniture is so expensive. I got a table $700 that I thought was outrageous in price. Now I see that it really was the steal the woodworker said it was. Thanks

[@stevemartin2277]

Dog Person - Thank you for your videos. I live in Vancouver, WA. I have picked up some walnut pieces and am working toward making my first epoxy table. I will be an end table, with a small river between 3 bookend pieces. Your videos have encouraged me to try. Thanks.

[@simmons815]

I’m a dog and cat person. Thank you for making this content. I greatly appreciate you sharing your knowledge with us.

[@maarontlarafaria6830]

Cat person. Not a wood-worker, just love watching someone make incredible pieces from such rough materials. Great work!

[@susanmatteverett9087]

Both! And my dog and cat love each other…bonus! With your encouraging guidance and advice, I am just finishing a maple and epoxy dining table in time for Thanksgiving. Your tutorials, with all your tips and product information, made it possible. I live an hour away from Portland, and yesterday was my first visit to Creative Woodworking NW for sanding and trimming. What a cool shop! Thank you so much for all your knowledge and experience-sharing. I wonder what my next project will be…?

[@ModernTechnology99999]

I am a metal worker/welder/fabricator with 40+ years of experience. I just discovered your channel and videos. I absolutely love watching them. Please don't change them. I find your commentary very helpful to know what and why you are doing! I am a new subscriber and eagerly awaiting your next project. Thanks for sharing your craft!

[@rodo748]

One of my favourite channels, I had no interest in woodworking but the mix of honesty and ability really make this a great watch. Team cat

[@mshaf]

I'm a dog person. I've done woodworking for a while as a hobby and want to do more pieces like this. I have a decent shop and you've given me the confidence to look into doing more. Thank you. I'm glad I found your page here!

[@Tony-qi2uo]

I’m an aspiring woodworker. I never got Into it seriously because I believed I needed those high end expansive tools until this video came up. I have most of the alternative tools you mentioned. Thank you so much for making these videos so openly and freely with your experience and knowledge!!!

[@artisanalfirewood8202]

i posted a theory on another site that got me alot of hate.... but i still agree with it. buy the low end tools you can afford to buy... get a cheap table saw cheap router, cheap drill, get yourself a drill plunger instead of a drill press, a cheap cut off saw..... get whawt you can afford to build up yoru shop. all the cheap tools mean, is you will need to spend more time on finishing. more time on finishing means you get better at that part, you figure out short cuts, you figure out tricks, and build and sell your work. Then replace the garbage tools you bought when you can afford to. replace the drill plunger with a drill press. replace the electric hand planer that cost you 50$ with a thickness plainer. replace your small table saw with a cabnet saw,,,, buy yourself a cheap band saw...then as you sell more stuff replace it with a good one. buy what you need, that will do the job.... then replace it with a better one (for me once i finish my canoe.... i see if it works... then i sell it... then every canoe i sell is a new tool... its been put on hold for over a year becuase of wedding stuff)

[@luci_annihilates]

I dont have much experience at all with woodworking, but this feels like something I really want to get into. I've been researching related info this past couple days and this video is really inspiring me to start the process for real. I'm already converting poorly used spaces in my home and outside for future woodworking.

[@lorisalsbury8293]

I have 2 dogs and a cat…both have purpose being out in the country! Love the chill demeanor and alternative ways to get it done. Just started subscribing and really enjoy your videos. Love wood furniture, tables, etc. Thanks for sharing your time and videos with us. 😊

[@the-first-joe]

I am an either or rather both person as well.

[@jonathanmiddleton5261]

Thanks man. This is very motivating video for me to quit making excuses and get to making/selling. Btw I like both dogs and cats.

[@BlacktailStudio]

Love it Johnathan

[@stevenshylo4419]

1) Absolutely a dog person! 2) Love how you made something that could be done by the average joe and proved how well the market would support the price point. Thank you for all that you do!

[@theobserver9131]

Thank you for the inspiration! I realize that I've been selling myself too cheap, I've had difficulty with sales in the past, and my response to that difficulty has been exactly wrong. Lowering and lowering and lowering my prices until I got to the point where it's not even worth doing. I absolutely gave up about six years ago, and it's been super depressing. Making stuff is what I do. It's how I've defined myself, and not making stuff feels like I've lost my soul. I'm going to go back at it, and not be afraid to put a little pride into my prices.

[@BlacktailStudio]

Love it

[@sachiaiko]

Awesome! Don't be afraid to value ur work. The truth is, a lot of folks do the exact same thing. It doesn't sell so they knock money OFF their work. The funny truth is, the cheaper the product is the less a person values it. So if ur willing to sell it for next to nothing they are likely to believe it's value and quality is less. Just human psychology. I wish u luck :-) Blessings and peace, Sachi

[@Slowhand871]

Hell yes! Good for you!

[@FallLineJP]

It works with houses, I’m pretty sure it’ll work with pieces too - sometimes when something isn’t selling the best move is to *increase* the price 💪 Good luck and thanks for sharing

[@mhenlopotter1612]

Cats. Two things to keep in mind: - "Everyone can do this" should rather be "Everyone who sets their mind to it can do this" - If you don't need to have this done in one weekend, all of it can be done with (relatively cheap) hand tools and a lot of patience ;) (if you want to get started with cheap hand tools check out Rex Krueger here on KZbin)

[@donmedford2563]

I agree, cats taste better than dog. Ask any Chinese. lol

[@gardengatesopen]

I agree with Mhenlo Potter. When I started woodworking, (that was waaaay before the advantage of the internet to source information!) I was soooo slow! 🐌 🐌 🐌 Sometimes it felt like I would NEVER finish!! Other times it took so long I would loose interest in the project before it was finished. Regardless, just keep on chugging! Finishing any project is such a great feeling. 🏆

[@ronskopitz2360]

From a dog guy’s perspective… Regarding cutting circles with a router… one technique is to first cut a template out of 1-2” MDF using a pin and a straight bit on your table. Then pre-trim your lumber very close to the finish size. Use double-sided tape to attach the template to the wood blank, and then use the flush trim bit to match up the template. Making the template is a little extra work, but it’s safer than trying ton plunge cut for finish piece, you don’t put a hole in it, it’s repeatable, and you can re-use the template many times…

[@billiondollardan]

They look really pretty. I've been watching these types of videos for years and I finally made my first step towards woodworking. I called a local shop and asked the guy for some one on one time to help me make a few cutting boards. We'll see how it goes!

[@vinceearl4240]

Welcome to the club, dan! Best of luck!

[@careyaustin5525]

Tee hee- I'm both! Raise them together usually. Kittens with grown chickens with wire barriers; Manx house kittens with grown toy poodle; older kittens with 8 week old puppy. I love watching all manner of woodworking. A little thought and creativity and it's always possible to come up with a way to adapt that knowledge to one's personal situation. Beautiful products from your workshop.

[@slackmack]

Golden Retriever all the way 🐶 I really enjoy your clear narrations, i love working with wood as a hobby, no commercial value to what i produce. It's just great to watch your videos, it's akin to seeing high end sports cars; you know you can't ever achieve one but that doesn't stop you admiring pure class when presented before you. Thank you for the entertaining craftsmanship.

[@billmatteucci2898]

Very nice tables! I know you’re into the big stuff but I’m sure there are a lot of us that really want to see more of the small items like these tables. You’re very inspiring. Thanks, Bill

[@freerunmac2895]

I’ve never watched a woodworking video before but wow the production was amazing and I love how many methods and different tools you suggest. It really shows you care about teaching others

[@cycloneranger5354]

When money is involved it's not really about care, is it?

[@jamespurcell6627]

Dog owner, but dog and cat person at heart. I loved the Etsy photoshoot. Made them ‘pop’. Amazing.

[@ronwilson5476]

Im a dog guy and this was the first time I watched one of your vids and I really enjoyed it. Thanks for taking your time to make it. Great looking product as well! Thanks again!

[@alexmcalpine6667]

Congrats on the database! Awesome thing to do for the community! One of the coolest ideas I've seen for ages! :)

[@wildrabbitwoodworking]

That is a great project and is definitely feasible with just basic tools. I think the biggest challenge for most is the perfect circle top. Great work!

[@ChristineJump]

DOG: What a great way to make your point about anyone being able to do this, especially taking that lesson all the way through to the sake and net.fabulous content. Thank you.

[@mikehoncho6109]

You’re an amazing craftsman and I love your “clap backs” to some of your jealous viewers. 😁 Love your content. I don’t understand why some argue they can’t do what you do bc they don’t have your nice tools. Woodworkers have been making spectacular pieces with hand tools (only) much longer than we have with power tools. Power tools are a new invention in the grand scheme of things. Thank you for your content. Love your channel!

[@jakecorrado9070]

Dog dog dog!!! Thank you Cam!!! Seriously…you have inspired me. I’m a firefighter in Michigan and I’m getting close to retiring. My goal is to make my hobby wood shop into a retirement-supplemental-income shop. I’ve been really on the fence about retiring and the fear of not being able to bring in any supplemental income through wood working. Well, this video (plus so many of your other ones) have shown me that it really is possible for me to retire from the fire service after 25 years and truly enjoy retirement as well as generate a small small small income from my wood working. Thanks man….I really appreciate this video A LOT!!!

[@murc111]

Lucky guy, wish I could retire after 25 years, government jobs have the best perks.

[@Happyfaceshock]

Dear Mr. Blacktail, I’d be interested in seeing you do a similar video - designed for beginners and hobbyists, but using entirely tools that beginners might have… Jigsaw, circular, angle grinder, hand tools etc… I’d personally be really curious about seeing your approach with these tools in general, but also it could be helpful for me and others :)

[@InchFab]

Lol yeah right.

[@TheRealDogfart]

Pass

[@ixurlife8062]

🤣 Just gona throw this out there for fun but before electric power tools sanders planers even routers excited before electric they made them out of wood and powered them by movement 😁 plenty of documented evidence and diagrams on how to also 👍

[@agentstaple1]

Check out Rex Kruger And to the others saying it's impossible, you really think that little of yourself? Have you never applied yourself to anything? Cause when you make those kind of comments that's all I hear "I cant do it so theres no way anyone else can", you'd be surprised what you can do if you practice. Just a few hours a day or a day every weekend, after 6 months you'd see this as a really easy project.

[@ike8236]

Yes exactly, no point saying it can all be done with basic tools then doing it all with a fully stocked woodworking shop.

[@jewdd1989]

It’s absolutely gorgeous, I love them all but definitely love the dining table with so much figure and variety of tones and shades.

[@jasoneubanks5385]

Thought I was a “neither” person, we got a small dog for my son and it turns out, I love her as much as the rest of the family does. Thanks for making this video! I don’t know if I am inspired to become a full time woodworker right now, but I might slowly introduce it as a hobby.

[@LoneOakWoodworks]

10:00 that glue line really stands out, Titebond makes a dark glue for walnut, just picked some up myself and should be trying it out this weekend..

[@msBatFink]

im a 57yo dog woman from Sydney Australia and i always watch your videos to the end..love your work❤️🇦🇺🤍🇺🇸💙

[@aberendt]

I’m a Cat and Dog person. They’re both awesome in their own way. How did you ship these two tables to the buyer?

[@Sanjuro2112]

I’m a dog person that also likes cats. Ya, $150 in shipping sounds pretty reasonable for something that big and heavy.

[@greyspot00]

I'd also like more information about how to actually ship these things. Is there a service that will pack and crate them?

[@TheGreekBoxer]

I'm a dog person, wife and kids want a cat. I second this question. That has been a huge reservation of me listing on sites that require shipping. Small coffee table was almost 300 to ship. Any advice helps. Thanks.

[@chefboiiyardee6014]

i’m a cat and dog person and i have no shipping information to provide

[@JesperMakes]

Cat-person! Awesome job Cam. The tool-alternatives tips are great, and it's a great idea to also show projects that more of your followers can do. Cheers from Denmark

[@Rezornch_and_Dvelenktronx]

Cat. Excellent video. Thank you for the transparency about how to sell the items. Scanning through your library of videos to glean more info about shipping vendors. Also, I think your idea for an app to share workspace/tools is awesome (Perspective of someone who has shop & tools) Looking forward to seeing more videos about how to operate a business.

[@robertjay1179]

I have two cats but love dogs.if that doesn’t make sense , talk to my wife. I am or was a pretty good woodturner who ruined my shoulder moving a massive piece of wood. I have 1 year of debilitation from my reverse shoulder replacement and your. Ideas are the most motivating I have seen. Love your work and you have motivated me to start to clean up my shop while I wait to get back into it. Thanks

[@nicstedman3719]

"Neither Person" here and just wanted to say I'm seriously considering doing something like this in future to see what will sell. In my line of work of asst golf course superintendent I do a ton of tree removal on the property and a co worker and I in spare time split up and sell as firewood rather than going to the brush pile for burning. Along the way we've been saving the nice lumber like Black Walnut and Cherry that he used for a mantle and slabbed for table top projects. After seeing your channel and this video specifically I think I might just give it shot and see what happens. Looking forward to watching more in the future.

[@randyp792]

Hey Cam, really nice tables. As far as tools I always say buy the best you can afford that has served me well for over 40 years in several successful wood working ventures. I love festool watching you sold me on adding the vac clamp (thanks) Dogs for me specifically golden retrievers Keep up the great work

[@Adam-gi8sv]

This video was actually pretty inspirational to start doing this type of work and trying to sell it. I've only ever done projects for my self or friends but this opens up more ideas. Thank you for all your content

[@andrewh3730]

Dog& Cat. I’ve had both at the same time and they got along great. Currently two cats Peaches and Cream. Just wanted to thank you for the down to earth approach you give to these videos. Their simple yet elegant pieces and something I’m going to try. I also appreciate all the information you share and links to the different supplies and equipment.

[@trcmf]

That’s impressive that you sold them for that much. Great job building them. This is something that I could definitely do. Super glad I watched this vid.

[@ddl2k7]

As someone who is kinda starting out, to make those with lower end tools and get practice and also a decent profit! The proceeds would go right into the next "addition" to the next tool! That's the fun I think. Just got myself a carbide thickness planer, and for now everyone is getting built things for Christmas! Also dogs over cats but we have both, plus Guinea pigs lol

[@breakingthemasks]

Dog person... This is the first video I've seen from you, and I'm already subscribed. Massive props to you for two things, explaining the steps that a beginner woodworker can use to execute this build. And for going all the way to the selling point, while using a brand new Etsy account... To actually show the proof that this project can make a serious return on investment. I've seen other woodworker advise building small projects, but I don't think I've ever seen anyone actually proves that an unknown new account can sell a high priced item. So massive props to you for that, and I'll be looking forward to seeing more from you. Cheers!

[@Roobiekun]

Couldn’t have said it better myself! Also: dogs and cats. And chickens. Maybe a horse or two.

[@patriciaabell9393]

I love cats, dogs, mice, rats, horses, donkeys, fish, etc... usually depends on the rescue need... Love your work! My dad was a woodworker...he did intricate blends of different types of wood, ending with many colors, and beautiful to behold... lots of little boxes with mystery drawers with puzzles to open... I can respect all wood working done with a little skill and alot of effort... plus I really love the smell of wood when it is being lathe shaped, sanded, or cut!:-)

[@joegrisafi9134]

I applaud your positive attitude. One of the more “honest” channels that I watch. You do fantastic work and I greatly appreciate you. I’m going to try the small table idea and see how it goes. I’ve been woodworking for about a year and a half now, retired military as of last year. Now I have more time to invest in myself and hope for the best. Up until now I’ve created a lot of the smaller, more “normal” pieces like drink coasters, cutting boards, seasonal ornaments and such. Keep an eye out for Resolute Woodworks coming to a town near you!

[@donmedford2563]

Joe Grisafi, thank you for your service.

[@maidinulster]

Love these vids, makes me want to do this stuff. Very inspiring the way you say that most ppl can do this using ordinary wood work tools, but as per usual, great job

[@garethbaus5471]

I like cats. Definitely an interesting project, this sortove makes me want to redesign and build a desk I designed in my high school CAD class. My original design wouldn't have been super stable, but the core concept was still a good one that isn't used much in furniture and would make a good tinkerer's workbench once I redesign it. Also the way you attached the leg seems like a nice method I might barrow it.

[@Mike84501]

I am a both person. I love dogs and cats. I have 1 dog, an 8-year-old golden retriever, and 2 rescue cats we adopted in February after losing our 14-year-old cat, Charley last November. Those tables are beautiful. I am glad you sold them.

[@yankee2yankee216]

You are one of the clearest, most enjoyable-to-listen-to presenters/explainers I've come across... and a terrific woodworker to boot. Keep up the good work! Subscribed.

[@RFC-3514]

10:40 - The issue isn't so much making the bottom of plate itself flat, it's that even a perfectly flat plate would rock if there was anything on the table under it (a wrinkle in the tablecloth, a breadcrumb, etc.). Also, in the case of ceramic plates, that ridge (called the foot) prevents the glaze on the bottom of the plate from "gluing" it to the kiln shelves when it's fired.

[@adamredden2007]

Love your attitude, man. Just found you yesterday and can’t stop watching. I have a bandsaw mill being delivered in a few weeks that will only do 30” wide slabs but I can do a lot with that. I’m planning to build a shop first thing and then start acquiring some more tools geared to woodworking. I’m a carpenter but woodworking at your level is a different thing and I’m soaking it all in. Planning to try and make a business out of it and slow down on the remodeling work…work from home more. Small tables and mantles to start. Thanks for the inspiration!

[@hahasasquatchvods5125]

I'm a cat person. I greatly appreciate simple breakdowns with alternatives like this for new wood workers (also like me). Thank you for the and keep up the amazing work, it gives us little guys something to aspire to.

[@robertbusek30]

I’ve owned both, but I’m more of a dog person. I know I’m late to this particular party, but I’d love to see more of these “weekend warrior” projects. The style of these pieces isn’t really my style, but they are beautiful!

[@pmiller4421]

Dog, we have an Australian Shepherd, I know I would be able to make these if I put the effort towards it. I will agree you wouldn't need a full shop of tool. Im going to check out the database for places near me. Thanks for starting the database!

[@bhtiii]

Great little table, I've been repairing wooden fishing boat for over 30 yrs and retired now. I built a shop outside Port Townsend and I'm doing wood working still, tables duck boats and duck calls and I have a little French bulldog that keeps me company at my shop. Right now he laying buy the wood stove. Regards Ben

[@daltonscharff]

Those tables look awesome and actually feel achievable. Great video! Would you mind explaining more about the shipping process? How did you ship a project this large? Do you ship in a cardboard or wooden box? What kind of packing material do you use?

[@troydowns7748]

I have had the same question!

[@jcsrst]

I love how a lot of the trolls having trouble spelling 🤣! I always enjoy your videos and find your voice quite soothing. The troll of the week is just icing on the cake!

[@steverochon1620]

I’m a total dog person. I’ve had a dog in my home, with only brief interruptions, sine 1977. It’s a blessing. So can you provide insight as to shipping something like this? Do you simply take it to UPS or something similar and have them create a way to ship such items, or do you have to configure a container for shipment yourself? These turned out great.

[@handles438]

I just found this channel yesterday and I've only watched a couple but omg I love the "fan of the week" at the end. That's funny. Considering none of my woodworking makes any money, I guess by that guy's logic, I'm a legit woodwoorker! WOO!

[@paradisepruningspecialists5045]

Definitely a dog person. Love the process, and the explanation of alternative tools that can be used. Also nice to know that nice profits can be made from such a small investment. Amazing work, congrats!

[@garykazatsky4881]

Beautiful pieces! I see you cut the legs to 18”, and maybe I missed it in the video, but can you please give me an idea of the diameter you chose for the base and top? Trying to get an idea of the proper proportions for a pedestal table like this…Thank you!

[@briholt100]

Cool video. I think the tools and attachments certainly speed things up. Having invested in different stains and protectants are nice too. But, how did you package it for shipping? This doesn't look like a basic bubble wrap situation. :)

[@nationalheritagenaturepark6651]

Dog on some days Cat on other days Just like my Human! From far off South Africa. Talking about tools and workshop setup. I get so much enjoyment from drooling over expensive tools, then going back to my great grandfather's machine and carpentry books to teach myself how to make them all, and that's from before Bell, Edison, In fact, one of the best "Tools" I have found is my enquiring mind coupled to my hands.. but I love your instruction, Kind regards Keith

[@edtsch]

This was inspirational! Thank you so much for sharing your efforts with us. I'm curious how you shipped these pieces. That's always difficult for aspiring Etsy furniture sellers to figure out.

[@troydowns7748]

I have the same question

[@1212sman]

A wise friend once told me, "Anything worth doing is worth doing for money." Well played.

[@PhilClayton89]

Hey there, love your videos! Really itnerested i ngetting into woodworking myself, even if just as a hobby. How much would you assume would one have to spend to get the mist necessary tools one needs to get started when starting at basically just a hammer?

[@anubispup4760]

It depends on the type of woodworking you're after. Machines or handtools? Are you jointing and pegging or using nails and screws? The woodworking I do is 100% hand tools, chisles, drawknives, shavehorses, hand planes, hand drills and much more. All the nuianced individual tools for specific purposes in the long run costs more. I have 26 saws, all of which are for different things, compared to buying one electric miter saw that can accompolish all 26 jobs way faster.

[@CentralKingPin]

I'd say right around $1000. But honestly, start with one tool, make a sale, buy another and keep going. I started mine business with $100 and I'm about to go full time with it!

[@meperson]

You need a drill, a circular saw and a ruler. Plus some smaller items like paint brush, sanding paper. You adjust the design and the material to use (dimensioned lumber vs s2s) to what you have.

[@allrebr]

Cat dad here 😊 Cam I cant tell you how much I appreciate your work. Thank you for your time ☺️

[@acharalabop]

Neither! The alternatives list is great, but I'd love to see you attempt a "hand tools only" project one day. Nothing big, but something that will make you make the most of things like spokeshaves 😁

[@charlieevergreen3514]

Check out woodworker Paul Sellers. He a king of non-electric hand tools for wood.

[@richardamott808]

If woodworkking is your passion and you wabt to learn more about how to do it all by hand college of the redwoods out in california has a great program. I learned alot second hand from a friend how attended a program there.

[@acharalabop]

​@@charlieevergreen3514 Thank you! I am more than aware of Paul Sellers - I'm suggesting this to Cam as an "out of his comfort zone" experiment!

[@charlieevergreen3514]

@@acharalabop Agreed. Cam’s enjoyment of the spokeshave made me think of Paul Sellers. Glad you know him too.

[@2FunWoolyboogers]

Cats are Hilarious, but dogs are loving. Phyllis and I try and salvage old antiques (i.e. Singer Sowing machines, Victrola Record players, Gate leg tables) but we learn so much from your videos. Maybe one day soon we will start "Building something of our own Imagination". Thanks for your Videos. Marty and Phyllis from North Carolina

[@vikimoody8783]

I’m a both cat and dog person! Love your channel. I’m not a woodworker but I love watching fine craftsmen. Good job!

[@russ3022]

Dog person. Cats are OK as long as they are cooked correctly and served with a good gravy. Loved the tables. I am a beginning woodworker. I mostly have made charcuterie and 3D cutting boards, but I have made a few night stands, plant stands and one bed frame. I've made stuff then given it away to my friends and my wife's friends, so now I'm at the point of needing to sell stuff to have room to make anything else. Still haven't set up on Etsy, but plan to in the next week or so. I haven't tried the power carving before, so I'm excited to try that out. If you are in Texas sometime and see a huge dust cloud, that will be me trying my hand. Thanks for the great idea!

[@jasontraynor6721]

I'm a dog person. Beautiful work brother. Very relaxing to sit back and watch you work. Thanks mate.

[@Sellswood]

Hey there, I am a hardwood lumber and millwork salesman. Same company for 32 years. I was a woodworker prior to that. Your videos are excellent.