My Toughest Client Yet

Smart desks don't have to be ugly. That is what I challenged myself with before I started this build anyway. Whether or not this is actually a smart desk is debatable. I made it as smart as we needed it though. Featuring a built in light and dimmer, USB charging right on top, and pretty much all hidden wires. This desk is for my wife, so we designed what we thought would be the most timeless, as well as the most functional desk we could. In addition to a solid brass power outlet, USB, a light, and a dimmer. This desk is highlighted with real brass infused in resin. The liquid brass was then used to highlight the natural cracks in the slab. All this and lots more, so probably easiest to just watch the video.
Custom furniture inquiries: www.blacktailstudio.com/contact
Need one on one help? Skype consultation: www.blacktailstudio.com/shop/...
Buy Blacktail apparel: teespring.com/blacktail-studi...
Bookmatched Table Base Build • Bookmatched Table Base...
Related blog posts:
Brass Resin: www.blacktailstudio.com/blog/...
How to sand wood properly: www.blacktailstudio.com/blog/...
How to get a perfect finish: www.blacktailstudio.com/blog/...
Buying live edge wood: www.blacktailstudio.com/blog/...
Table base build:
Items used in this build:
Walnut slabs: gobywalnut.com/
Brass powder: amzn.to/3cY61YS
Bronze powder: amzn.to/2W4bEyK
Copper powder: amzn.to/2TXYyjx
Epoxy: amzn.to/2W14xXz
Osmo Wood Finish: amzn.to/38EtniS
Track saw: amzn.to/3cPNDBp
Best sander: amzn.to/38AU9bK
Better forstner bit: amzn.to/3cNNZs9
Gem buffer: amzn.to/3btzKqZ
White buffing pads: amzn.to/2TE4NtW
Disposable paint brushes: amzn.to/2vVkGDl
Tyvek tape: amzn.to/2xsOmYY
Sandpaper storage: amzn.to/2TOfTLK
Thin CA glue: amzn.to/3aL3gYM
Vacuum chamber: amzn.to/3cYLmUA
Website: blacktailstudio.com/
Instagram: / blacktailstudio
Facebook: / blacktailstudio

[@TheKeithbruce]

Cam .. just curious how much that slab cost ? thx

[@BlacktailStudio]

I meant to put it in the video. $600.

[@G00435563]

@@BlacktailStudio yikes. Thanks. Walnut is so expensive

[@wakranich3488]

Ca.m. the walnut slab cost 600. or for the finished desk? You showed how beautiful walnut is. My dad, a carpenter, built two huge walnut bookcases on each side of the fireplace in his house.

[@BlacktailStudio]

Just the slab 😊

[@jaydenhofer3747]

@@BlacktailStudio That's not even half bad for walnut that nice I'd pay that

[@Hayest51]

Cam, I don’t care if its fully a “smart desk” or not. The end product is stunning, you should be proud of that.

[@69grandpa69]

David, you're stunning. You should be proud of that.

[@dylancozens5902]

Geoff, your handsome you should be proud of that

[@beforelifewaschaos]

@@dylancozens5902 You spread love and good feelings. We need more of you guys. You all should be proud of that!

[@ffcuk63]

@DQ, your positivity has put a smile on my face, we need more motivational ppl like you around, you should be proud of that ")

[@levitheguymyguy6955]

@@ffcuk63 your guy’s love of saying “you should be proud of that” is amazing, and you should be proud of that

[@ingredgarrett9823]

After watching the video advert i was still skeptical. But when i finally downloaded the plans kzbin.infoUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG i was very impressed. The whole plan was just as you said in the video. Thank you very much. I now have a large and valuable collection for my woodworks. This is great!

[@abetperez9938]

Cam that desk is a labor of love. Great job. The brass fittings and lighting blends well with the wood. I’d rather here you talk non-stop than listen to a background music. You explain everything step by step pretty well. You are doing great!

[@iwondery1725]

Cam - no question needing a response, just wanted to comment on how beautifully this turned out. The brass inlay was a surprise but it looks really nice blending with the other brass features.

[@timprescott4634]

Cam, Not strictly a “smart” desk but I think your “toughest” client made the right decision and you MADE it smart just by listening!😎

[@olivepressdesign]

Cam: “What she likes vs. What I’m capable of doing.” I think you’ve summed up marriage.

[@darinking1343]

Yes Dear, while mid-air, when she says jump... 39+ years... Well trained :)

[@ReCyke]

@@darinking1343 It's called "domesticated" LOL

[@dastew5490]

This comment won the internet today.

[@quaternion]

He sure did 🥳

[@user-jd3xm3ce6p]

Cam, that desk is gorgeous, I love how the brass fittings fit so perfectly flush and how the brass resin adds great contrast

[@frankmesser4425]

Hi cam thanks you gave me some new ideas 4 years later

[@louislandi938]

Cam, this is not just a beautiful desk. To me it is a work of art. If anyone didn’t love it, there is nothing that would make them happy. Your wife now has a one of a kind desk. You are a master craftsman. I’m just starting at age 76 and admire the skills of people in your league. Great video!

[@lapdog5355]

I'm 77. Glad to see I'm not the only "oldie" who's just getting started!

[@gabewilliams1341]

Cam. I see you’re in Portland. If you ever need some help I’d love to be an intern. Knowledge is the only payment I need. I just love your work man. Really cool stuff.

[@mymadeupdreams]

To me a "smart" desk isn't about how many features it comes with but how seamless function and design can be. You made the desk look really clean and it's a very well thought out design!

[@2mraid3r]

Dude I’ve been doing woodworking for 20 years and appreciate the level of detail you used here. Outstanding work!

[@emalenfmale1295]

Cam, that desk you made for your wife is not only functional, but also beautiful. You are not only a craftsman, but you are also an artist.

[@jimserhant7741]

Cam, To be completely honest, This channel popped up in my “Recommended” one day and I could not be happier that it did, I’ve found myself binge watching your channel between PT sessions lo. Keep up the amazing work.

[@BlacktailStudio]

Love that!

[@Bminka1]

Cam - Off topic. I believe you live in Oregon, correct? I am in the process of moving my family from CA and wanted to know the better areas to live in. Looking for a family oriented town with good schools and tree lined streets. Any help would be greatly appreciated. .

[@Lindowman888]

I am now the same. Wish I had Cam's skill and also the workshop but it is a great goal as I near retirement

[@krisjohnson5840]

Same. It's ignited a passion and I love not only your final products but the way you shoot and explain is perfect for me! Wish me luck as I pursue a new venture. I've actually decided to start a milling business specializing in live edge slabs and river tables! Thanks again and keep em coming, I'll keep learning!

[@RossWehner]

I completely agree. Keep it up Cam. These videos are entertaining, informative, and inspiring.

[@zymzyck4152]

Cam. Love the desk and the brass epoxy. As a dentist I pour plaster models of patients impressions all day long which need to be bubble free. We use a dental vibrator to eliminate bubbles. Get your Dentist or his staff to show you how it is done. It may give you ideas you can adapt to your work

[@T5623QCOM]

CAM, I'M STILL PLAYING CATCH-UP, BUT SO FAR I LOVE EVERYTHING YOU DO! THANKS, TONY

[@hasmax786]

I just love the way the wood looks when it's finally finished I just want to glide my fingers over it to get a feel of it's smooth natural exterior.

[@NixCM]

fill the cracks 90% before adding the brass+resin - same look AND way cheaper on the brass powder!

[@NixCM]

@@uuuultra I quite liked the look, way nicer than another trashy 'waterfall desk'

[@sliceofbread2611]

@@uuuultra that is your opinion. some might say the brass fits nicely with the other metal parts and looks nicer than a homogenous colour filler.

[@meganthwaites]

That’s what I thought!! Fill me up then add the brass on the top layer:)

[@johnmartinez9220]

@@uuuultra it's what his wife wanted dude.

[@bobnoble6476]

@@uuuultra i cannot express how much i disagree with you. there is a place to get the job done, but when you're designing a 'fine' piece literaly any solid color is better than attempting to hide a void.

[@escsniper]

CAM, I'm still catching up with all your videos, but just wanted to say I'm impressed with all your projects!

[@vincentbreda8444]

Definitely NOT just another desk. That desk is so amazing. Really cool how you implemented wiring, plugs, and lights to this desk. Very unique from past videos and works of art you’ve done.

[@ladiesman21727]

Cam, You can easily find a wireless charger to replace the usb holders if she wanted in the future. I have seen gold ones that would match this too. Those holes make the tech replacement timeless for this desk

[@ta1ntv1lle39]

Cam - "Let me know if this is a smart desk or just another desk" that may not be a "smart desk" ...but its 100% NOT JUST ANOTHER DESK!! WOW!!! Amazing work man, just WOW

[@BlacktailStudio]

I’ll take that!

[@carlloschiavo4320]

Cam, I really enjoy watching your process. You explain everything. I build furniture too, but your stuff is next level. Thank you.

[@thegrinch77]

Cam... This design and craftsmanship is absolutely stunning! Thank you so much for making such great KZbin content. So generous of you to include the viewers in these processes, and putting the effort in to making these truly stress relieving videos.

[@talexb]

Cam, just realized that this video is almost 2 years old. Wow. Anyway, I appreciated the silence while you installed the hardware on the desk, much as I enjoy your narration. Love seeing wood-working done -- all of the welding and machining I've been watching is entertaining, but wood-working is amazing.

[@mjb12141963]

2 years old and still getting regular comments. That says something by itself.

[@twcmaker]

Woodworking is Amazing 👍👍👍

[@elfinmajictime]

I have always said that if I found a man close to my age with these kind of talents I'd never leave him (even if he begged me to). There's something about a person who can build something - especially something that requires this kind of artistic eye. This kind of talent has disappeared from the general population and it's so nice to watch someone work. BTW, just from your title I knew this was for your wife!

[@alanauUK]

Cam, it is priceless, a labour of love. I wish my wife could make one like that for me since she has got load of tools and machines from her elderly dad. Good work!!

[@melonmw]

I love the brass! It reminds me a bit of the Japanese technique kintsugi. They use gold to decoratively repair broken pottery/dishes. The philosophy behind it is embracing the history of the dish instead of trying to hide the cracks and damage.

[@billbeam7147]

Cam, I am a 77 year old wood worker of over 50 years. Just beginning to dabble in Epoxy resins and I am learning a lot from your videos. Just enough detail, very good commentary, and I love all of the links. DO MORE DESK!

[@ag4391]

Hello Cam, first off that desk is amazing. That was just enough technology for that beautiful desk. Your attention to details is above and beyond. Great work!

[@msfighter4746]

Cam, another beautiful project! No questions, just great appreciation for the work you do.

[@joeybagadonuts5774]

Cam , your videos are so easy to watch with the explanation done post, with the speed up done when necessary. It's all just so smooth. You're a great talent and I hope your wife is enjoying the desk.

[@nicholastattersfield8793]

Cam, I do a lot of cold cast metal figures . I use urethane clear resins as my binder, but the concept is the same as for epoxy. Metallic figures can be a budget killer due to the expense of the metal, which of course is tied directly to solid metal per pound cost. I slush coat my figures with at least two separate coats of metallic/resin then fill with the same resin but using an inexpensive filler(glass bead, urefill,etc), I have even used chop fibre where strength is needed. Have you considered doing a partial fill with bulked epoxy, then reserving your metallic powder for the top 1/8th or so ?

[@FreeSpiritBudgieLady]

Cam, I love the desk especially with the brass insets. You could actually router into the wood any design you choose and fill with the brass, gold or other metal powder mixes. Bronze is beautiful when set this way. I've seen chess boards and other game boards using the same method. I look forward to seeing in what direction you take it, Best wishes, Cal 😉

[@b4l4a]

Just Amazing! Thanks CAM!

[@leolagraves1002]

Cam, I adore your pieces. I do not, however, like the bronze on your wife’s GORGEOUS walnut table. Keep up the interesting projects!

[@Aussie_Wild_Adventures]

Cam, awesome build and I’m sure your wife absolutely loves working from her new desk. Given me some inspiration to build my own here in Sydney Australia. Keep up the great work!

[@bartjohnson8139]

Cam, this is simply sunning craftsmanship. Your knowledge in how to blend simple lines into a beautifully crafted piece of furniture is testament of your skill. I’ve never worked with epoxy resins before, however after watching you I’m definitely going to start experimenting. Thanks for the inspiration!

[@rf4c1018]

Cam, I am new to your channel and have subscribed. I am a disabled veteran from the toxins I worked with while working on Air Force fighters. Love your gorgeous tables. I have done fine furniture pieces with maple and oak. I really love your beautiful walnut slabs you use. I live in South Texas. Thanks so much.

[@bigdougr.6261]

Cam, love your videos. I have a small shop but am still able to make some great pieces. When some of my customers actually see it they can’t believe what I made them came out of it. Very satisfying.

[@mathdoc1]

Cam, It should be named, amazingly beautiful desk!!!! Great job buddy!!!

[@arnoldasskulskis9276]

This is example how things looks like when done by complete expert to perfection.. absolutely stunning..

[@strand4of8]

Cam, that's a really cool desk. Just recently found your channel and I'm enjoying the way you talk us through your process and why you do something the way you do it.

[@onlinekicker]

I'm not starting my comment with "Cam" because I'm a rebel. Seriously though, thank you so much for documenting these projects! You're an inspiration to me and I'm sure many others as well ❤️

[@BIGWIGGLE223]

Cam, a good idea on how to really stretch the brass powder and make it last longer would be to fill all but approximately an 1/8" of your cracks with a clear or black dyed epoxy and then mix up a small batch of clear epoxy and the brass powder and fill in the remainder. I'm curious if you played around with this idea. And if you did, what was your results? Also, I bet this would look flipping badass against the black of a burnt tabletop! Love the way this turned out and that hardware is top shelf, my good sir. Top shelf indeed!

[@electronicsoldandnew]

Cam, I want to thank you for your amazing videos. First off, I know nothing about woodworking. My channel is on tube radio restorations. However, I’ve been down and out with Covid for the last week, and have watched many (really, a lot!) of your videos while I was practically unable to do anything, so I thank you. Keep up the great work.

[@darth_is5586]

Cam, such an amazing build great ideas from both your wife and yourself the brass inlays and brass was a stellar touch

[@mattlahourcade2764]

Cam, wonderful work sir. The amount of detail in your work as well as in your narration is very much appreciated. Honestly it’s what keeps an aspiring wood worker like myself coming back to watch your videos. Thanks Cam, Happy Holidays to you and your family.

[@turkicnomad5632]

For the curious, those outlets are from juniper design.

[@marlenemeinhard8956]

Cam, this desk you made for your wife was certainly one of the most unique desks, I have ever seen, with those USB, socket, and whatever she may need. The desk light was super sweet. But the best part was the brass resin around in various places. The wood was just Beautiful. You have a real gift with your ideas and workmanship. Then to share all your ways to do things. Really awesome love your channel.

[@bizzytexas7468]

Cam, You're utterly brilliant. Thank you so much for sharing how you do this. I've made tables and all you're doing is inspiring me to keep going and keep making. It is truly rewarding to watch this. Thank you for spelling out the brand names of the materials that you're using.

[@DisgruntledGrunt]

Cam, wow! Yet another amazing build. I’d love to see so copper resin in one of your projects instead of brass. I love everything about this desk though. Awesome job!

[@travishoyt]

Cam, absolutely love this desk. I have zero skill for making something like this but love watching beautiful furniture like this be built. Hopefully I can afford to buy a desk like this one day. :)

[@raptor87peak]

Gorgeous, and yes, it's the epitome of 'smart' desks.

[@ScottM-od1cr]

Once again Cam, loved watching you put this desk together! The wood is sooooooo beautiful. You have a tremendous talent. Keep up the good work! Scott

[@rollerblading202]

From 13:23 to 13:33 , I could look at that grain for hours. Absolutely beautiful!! Good job! I get excited every time you post a video, keep it up!

[@bonniehairston5827]

Cam, it's a beautiful expression of your esteem for your wife. Love the base. Each of your creations and collaborations are mesmerizing

[@camo_hunter]

Cam. I’m only 16 and I love working hands on, I don’t plan on doing anything with tables and such but if ever the day comes I’ve watched so many of your videos that I can at least not seem like a complete noob. I’m happy I found your channel you are amazing!

[@BlacktailStudio]

Thanks bud! Appreciate the support

[@gavinchia5841]

Cam, I don't know how your vids turned up on my feed but I'm glad they did. Amazing job the desk.

[@timlankford5864]

Cam, this is insane dude! Beautiful desk, VERY impressed. Thank you for the information man. Keep it up

[@dastew5490]

Cam, it's safe to say that it's smart looking. The brass tone really pops against the wood tones. It would be interesting to see what other metallic colours ( copper or a silver looking alloy) you could integrate. I'd be keen to see a silver used with a darker walnut tint. Love these videos, thanks for sharing.

[@scottfox803]

Can, your work is outstanding, and I appreciate your willingness to share some of your tips for the rest of us. I’ve been watching your videos for a bit, and am now working through your older catalog. Always great work.

[@ericsnyder6992]

Cam, this video is making me rethink how I want to make my outdoor table. I love watching your videos! Thanks for the tutorials and inspirations.

[@steprockmedia]

Cam, that was beautiful! I think you're right not to "over-tech" it. Technology is great for a while, but solid lumber? That's timeless.

[@BlacktailStudio]

Thanks so much!

[@donnewlin2608]

Cam, I would consider it a smart desk. Just curious, do you ever use design software like SketchUp for more complex projects, or do you just plan in your head and start cutting?

[@ronwilliams329]

​@@BlacktailStudio Actually I'd have made the desk to accommodate wireless charging as you already drilled holes for the brass fittings and one more shouldn't make that much of a difference. For 49 weeks out of the year there is only one thing that I absolutely hate with a passion and that's seeing USB wires connected to phones sitting on my nice orderly desk! The remaining 3 weeks out of the year are completely reserved for and devoted to the hating of Auburn, Tennessee and LSU, of which there is no greater hatred, especially Au Barn, of which I'm currently coming off of a serious hate-high on Saturday night with that 4OT win! RTR!

[@rl2109]

@@ronwilliams329 : GEAUX TIGRES` !!! Actually, Bama is my second-most favorite team! REAUX'LL TIDE!

[@ronwilliams329]

@@rl2109 Yeah! And those dawgs thought they got hit right over the head with a big Baton Rouge last Saturday!

[@yarkymoguel9360]

If the brass shine more like metal could look amazing too, great work! Felicidades.

[@MrDivagation]

Just "wow", that desk looks absolutely stunning !

[@raidadave7840]

Cam, i wish i would have discovered your channel earlier. I am not a wood worker but infind myself watching your videos a lot. Thanks for the great content.

[@tlgraber]

Cam, you have some of the most beautiful woodworking creations I have ever seen! I like your combo of beautiful wood slabs and epoxy. The brass resin adds a unique aspect to this desk.

[@BlacktailStudio]

Wow, thanks Tom!

[@five_oh_rino]

Wow, what a beautiful desk. I'm in the process of gathering material to make my own desk, and now I want a walnut slab just like that one. I'm nowhere near your skill level, you make it look easy.

[@richardgentry2528]

Cam, your work is superb, and your videos of how you go through all your steps are really well done.

[@gregheffner1896]

Cam, you truly are an artist my friend! Your wood working is amazing, and your results are superb. You do a terrific job explaining things, and making it easy to understand. Please keep up the fine work!

[@ddelimar]

Cam, I think this is a perfect amount of "smart" features, the desk is beautiful.

[@BlacktailStudio]

Thanks Dom!

[@Coady_09]

Cam, I would say that it is for sure a "smart" desk. Love the brass touches

[@tomblount5635]

Cam, amateur wood worker. Watching your vlogs is pure delight. Have gotten so many ideas and your attention to detail is incredible. Please continue doing these teaching lessons. Peace out

[@flamingomtn]

Cam, I absolutely LOVE that brass resin. I mess around with other types of resin projects and will try to incorporate some of that soon. Thanks!

[@EpikGamerYT]

Cam, what a beautiful desk build. I absolutely love the chamfered and beveled edges, they really make this walnut piece pop. Hello from Australia!

[@BlacktailStudio]

Thanks mate!

[@AustinHartt]

Cam, that desk was absolutely gorgeous! I'd love to see something with a more silver finish poured into a really dark wood to really highlight the contrast.

[@theprojectproject01]

I know you can buy powdered aluminum. I bet that'd work a treat.

[@sergiosandoval6874]

Cam, every time I see one of your videos, your craft puts a huge smile on my face. I wish I knew a tenth of what you know. Last night I finished a counter for my wife. She is happy with it, but I wish I could make a table for her, at least half as pretty as the ones you make. Great videos!!!

[@jamesp13152]

I love it Cam! You can always add more smart features as time goes on. This desk will around for quite some time.

[@amritsingh2171]

Cam, just wanted to say that I absolutely loved the desk. Great job and God bless

[@clarkevans5364]

Since I read *TopFineWoodworking. Com* , I think nothing will ever surpass it as an outstanding woodworking book. The book consists of attractive images as well as drawings and also reader-friendly text. I consider this book a "must have" since it supplies a broad range of information on just about everything working with woodworking and does it quite well.?

[@nd7177]

The desk may not be "smart" by their standards, but it is just gorgeous witj high level presence and character. Love your work.

[@joshbarrack6648]

Cam, Im watching from scotland. I appreciate your videos , unlike other videos on youtube you are direct and straight to the point on the project your doing. keep up the great work

[@verakonsuo3482]

Cam, I love watching you working on different projects all the way from Sydney Australia - Well done

[@kevinshumaker3753]

Cam: This is excellent. I love the brass filler, and it goes with the accessories so nicely. From a distance, you might not notice it right away, but when you get up close and personal, I am SURE it is beautiful. I personally wouldn't call it a 'smart desk', as it doesn't have any 'tech' functionality, other than the light dimmer. That said, who cares? It is still very 'smart' looking. Bravo Zulu. Well done.

[@keithmichaels6188]

Cam, I love the brass resin look. I would like to see it in something large like like a conference table or dining table. I think a deep pour with it would be way to much, maybe on a deep pour if there are smaller cracks or pits to use the brass to contrast with a black deep pour would look awesome. Keep up the excellent work 👍

[@papagrim9777]

I agree, I want to see this used more, but subtly like this. I think accenting a black pour would be awesome.

[@fishtail2616]

@@papagrim9777 I think a nice dark blue with a bit of brass would look amazing with some darker wood. Kinda like lapiz

[@akwamarsunzal]

Watching a craftsman at work is so inspiring, so peaceful. I am a wood turner which, compared to your craft, feels very amateur! I could never create your pieces. Of course, in time, maybe, but I am not a craftsman. Your humility, your humbleness, along with the outstanding pieces, makes your videos addictive! Thank you!

[@coleby77]

Can been watching the channel for ages but only just got around to watching this one! Love this…would be great to see more of that brass effect on the desk looked fantastic! Love what you do and I’m a non woodworker!

[@Scadaboy]

Cam, this was stunning! Looking forward to my heart attack recovery so i can try a slab table. Your videos are always very motivational.

[@BlacktailStudio]

Thanks!

[@Pineapple9]

Best wishes to you my friend...!!! Be well..!!!

[@mickrose9633]

Cam first time seeing your channel and I'm a middle aged craftsman that appreciates quality. Mick

[@BlacktailStudio]

Thanks Mick, I’m an aging craftsman as well

[@judisofka401]

Cam, I wouldn’t change a thing. Your desk is absolutely beautiful. Every detail is perfect. It’s gorgeous.

[@raymondybarra6721]

Cam, that is a beautiful desk, thank you for sharing your hard work

[@iankrapf5394]

Cam: I loved the way your wife's desk turned out. I just wanted to say you're an awesome builder and designer, and I always enjoy taking a look at your work. Keep it up! 🤩🙌🏼 Greetings from Argentina! 🇦🇷

[@BlacktailStudio]

Cheers from Oregon!

[@12Loco12]

I don't know if it's a "smart" desk. But it is damn sharp. Well done.

[@bripslag]

Cam, I've had a full-width slab of walnut crotch taking up space in my shop for over a decade waiting to become a coffee table. I just couldn't think of a good solution for the base. I love how nicely you handled the legs for this desk, and that got the rusty gears in my old brain started toward working on a solution. Thanks! 👍

[@livechannel2313]

Cam...what an amazing desk! The design choices you made were spot on...

[@ezraburns5661]

Cam, that’s a beautiful desk. No need to make it “smarter” when it looks as nice as it does.

[@BlacktailStudio]

Thanks buddy!!

[@ezraburns5661]

Blacktail Studio just wondering, you said that the brass powder is expensive, how much were they a bag?

[@shadowblack1987]

Disagree. Smarter is always better.

[@brendyndubuque5847]

CAM, That turned out to be a super gorgeous desk. I know it's probably be pretty expensive but I think it would look awesome to see one of the next desks or dining room tables you build with that brass epoxy pour rather than the black river look you usually do, though that is beautiful as well. I just think it would be a cool look doing it with the brass or copper color epoxy just to see how it turns out

[@mamayan5705]

Cam, your work is extraordinary! Totally gifted and refreshingly humble.

[@freezinweasle1]

Cam, I want to let you know how much I appreciate your videos. Very calming, informative and a pleasure to watch. Thank you sir.