Is this applied to all mamba x or mamba mamba monster esc?kv in motor all can be applied as well?
@josiasjavier2286 Жыл бұрын
What configuration do you recommend for my mamba monster 8s 1717 1650kv?
@kaiarneberg92032 жыл бұрын
So on bashing what do you recommend? Love that I can take of without cogging. 😄
@StewMac5702 жыл бұрын
For bashing I wouldn’t use CHEAT. Just set it to smart sense and about 10 deg of timing.
@kaiarneberg92032 жыл бұрын
@@StewMac570 ok done. Thank you sir 😊
@gunracr Жыл бұрын
I'm trying to figure this out myself and after looking at my linked laptop screen multiple times I just noticed on your video it indicates "fully engaged at/after" the ending max parameter in the range you chose or custom set. For days I thought the max timing ended at the chosen end parameter, unless I brain farted again the high end actually starts at the rpm high end and then runs at max timing to the end of the specific motor max limit
@nitro2037 Жыл бұрын
why does it make us choose a already set rpm to engage, why cant we pick our own rpm to fully engage?
@amocklifestudios61182 жыл бұрын
Can you go up to 100 degrees of timing
@StewMac5702 жыл бұрын
Not with castle software
@dwalli22 жыл бұрын
Can I run sensor only on the field link with a brushless sensored castle setup? Already running on smart sense at 30* timing but could use more top end
@StewMac5702 жыл бұрын
You can but you can’t set the rpm range for it to ramp in
@dwalli22 жыл бұрын
@@StewMac570 if I use cheat mode at a set rpm range, will I feel a drag break like I did in sensor only mode with no cheat?
@StewMac5702 жыл бұрын
@@dwalli2 probably, drag brake has nothing to do with CHEAT.
@dwalli22 жыл бұрын
@@StewMac570 right, but my drag break was set to 0 when I switched into sensor only mode and it started nosediving into every landing. Maybe cause the esc was trying to run sensored the entire time and getting out of alignment
@never-stock-rc29682 жыл бұрын
Clear as mud lol. So I don't need cheat mode for my xlx2 1100kv combo in my k8s exb? Or do I what does it do
@StewMac5702 жыл бұрын
No definitely don’t use cheat with the XLX2. Not sure they have the option to use cheat on the XLX2. For that type of setup only use smart sense. This will give you a smooth start and then the sensor is no longer used after that. This reduces noise and the risk of the esc getting out of phase with the motor. With these setup a fixed timing of up to 15 deg is all that’s needed.
@never-stock-rc29682 жыл бұрын
@@StewMac570 thanks a ton I appreciate it plus one sub here
@erikquicksell42282 жыл бұрын
When using the censored only mode can a brushless motor be used with that setting or does it need to only be a censored motor
@StewMac5702 жыл бұрын
Sensored only has to have a sensored motor.
@brandonpage26582 жыл бұрын
@@StewMac570 so if I select sensored only, and I'm running a non sensored motor. It will do nothing?
@StewMac5702 жыл бұрын
@@brandonpage2658 yeah it will just alarm as it detects no sensor
@JamesGrates10 ай бұрын
Can this be done on the castle link on an iPad
@StewMac57010 ай бұрын
Castle link is designed for windows PC only.
@JamesGrates10 ай бұрын
I’ve been using my iPad and I can set up my esc just can not read or understand all the items but setting up items no problem @@StewMac570
@antoniopagandiaz21892 жыл бұрын
Great video stew 👍👍
@DonChilon2102 жыл бұрын
What ranges for drag?
@StewMac5702 жыл бұрын
Depends on your setup and what rpm your motor likes to work in. There is no set value. Generally I like to spread the range over as much of the rpm’s as possible and make sure it’s fully engaged before your max rpm
@jarviscrawford7194 Жыл бұрын
How would u do a 1721 2400 I was trying different throttle curves but the fastest I got was a 1.83 I need a 1.6 dry tire that’s a 90,000 rpm motor I need to leave soft an pick up speed without spinning I kno u don’t have the care to test it but can u give me a starting point
@DonChilon210 Жыл бұрын
@@jarviscrawford7194 my starting point starting is At 20 with 13 degrees of timing using prep my time with dry tire is 2.09 still messing with the futaba 7px to ramp in the power after the launch.
@norulasyraf16542 жыл бұрын
Its suitble for castle 6400kv?
@StewMac5702 жыл бұрын
I run 45 deg from 6400 to 44500 rpm with my castle 1412 6400kv motor on 2s