How to stabilize wood with Cactus Juice and why? - Resin Tutorial

[@CasualDIY]

Check out my playlist with Free Resin Tutorials - kzbin.info/aero/PL3AlKP5QE9tkD57u1WT5GbMEFR5tzkMmv

[@AfroMocha]

could you do this at a lower temp for longer?

[@enz0_66garciagonzalez5]

Sokka aprobe this way

[@lennyrossa834]

i recommend not to use the oven in your house - Translate - dont put it in oven when your the wife is there,she kick your head in lol

[@CasualDIY]

Lol ye she will notice next time she will bake a cake or make a roast, the small stays 🤣👍

[@TXODM]

How does it do with wood that might have oil in the wood like a gun stock?

[@CasualDIY]

I think it will struggle. Needs to be moisture and finish free wood. You may have some effect but difficult to say what exactly.

[@obionekenoby1745]

talking little less because booking to listen you

[@CartoonFan18]

It'll quench ya! Nothing's quenchier! It's the quenchiest!

[@sonuverma2796]

Sir did you vaccum pump on continue 5 hours, or you off vaccum pump off when air bubbles stopped, and left container 12 hour. Please guide

[@miamited69]

Does the vacuum pump have to run the whole time?

[@CasualDIY]

Until the bubbles stop coming to the top

[@EBOhayaja]

Hey! great video (Y) thnks for taking your time with the explanation, very easy to understand the process

[@CasualDIY]

Thank you for watching

[@booyaa1851]

Do you make full time, I haven’t seen much of your stabilised wood /resin work?

[@topflight2358]

Can anyone tell me if the HF vac pump is sufficient and or good for 10 quart pot for stabilizing, I under stand it has a vacuum pull of 22 microns ????

[@justa1098]

Leave it in for longer. Mine is on full vacuum for at least 2 days and then soaking for a week

[@griftopherhitchens9926]

I'll try 48 hours under vacuum and see if this helps. I always have bubbles after 24 hours...always. I've dried to 0% also.

[@machineman6498]

👍

[@JakeThompson]

Great video.. well explained..👍👍

[@CasualDIY]

Thank you kindly my friend👍😁

[@sonuverma2796]

Tell me also when stopped bubbling , you realise air of vaccum container air, or with vaccum air for whole night

[@CasualDIY]

Depends, in most cases after the full vacuum process has finished I leve the wood in the pot to soak for a whole night with no pressure. But on some occasions I turn the pump off and then leave the pot overnight with pressure. Some pressure will escape over night. It depends on what I'm stabilising and how much of it in one go.

[@sonuverma2796]

@@CasualDIY can I use that process of gemstone fracture filling

[@CasualDIY]

@@sonuverma2796 never done that so can't really say

[@aminekettou7073]

Where did you get these beautiful pieces of wood from? Great tutorial btw. Always like your videos.

[@CasualDIY]

Got them off a friend. Don't have solid supply unfortunately 🤔 Thank you for watching 😁👍

[@paweldworski4888]

Bardzo pomocne wskazówki:) mam pytanie czy w domowym piekarniku można to wykrzesać? Nie będzie to szkodliwe ?

[@CasualDIY]

Jest raczej szkodliwe i nie polecam.

[@tonydedoscortados217]

Can you stabilize other stuff other than wood? Like dry flowers or cotton or paper?

[@CasualDIY]

Not sure never tried it. I know ypu can stabilise bread - seen it on Peter Brown's video 😁

[@briabbdowney430]

Great video. Well done pal.👍

[@CasualDIY]

Thank you very much, hope it was helpful 👍

[@paweldworski4888]

jeżeli chodzi o czas stabilizację drewna to jak najdłużej stabilizowałeś drewno ?

[@CasualDIY]

O który etap dokladnie pytasz? Czy cały proces?

[@paweldworski4888]

@@CasualDIY proces stabilizacji w pojemniku aż przestanie uchodzić powietrze z drewna.

[@CasualDIY]

@@paweldworski4888 Odpowiedziałeś sobie na pytanie, w próżni jest tak dlugo aż nie przestanie bąbelkować. Nie da się określić tego czasu, zależy od drewna, jego ilości itd.

[@iraklipiranishvili3352]

how long can you store cactus juice after you added activator in it

[@CasualDIY]

As far as I can remember is 6 months

[@iraklipiranishvili3352]

@@CasualDIY Thanks for quick responce

[@banditosp]

Żywice kupowałeś bezpośrednio w stanach czy gdzieś bliżej , Na stronie producenta nieźle sobie za przesyłkę liczą .

[@CasualDIY]

Kupowałem w UK

[@banditosp]

@@CasualDIY a mógłbyś podlinkować stronę sklepu ?

[@CasualDIY]

@@banditosp jasne houseofresin.co.uk/cactus-juice-stabilizing-resin-1-89-litres-1-2-us-gallon/

[@banditosp]

@@CasualDIY Dzięki za linak a może mógł byś nagrać taki tutorial po Polsku i ewentualnie powiedzieć coś o dodawaniu barwników do tej żywicy ?

[@CasualDIY]

@@banditosp niestety filmy będą tylko po angielsku ale będę próbował dodawać napisy po polsku 👍

[@bluverano]

What model is the vacuum pump?

[@CasualDIY]

It's more or less a no name off eBay unfortunately

[@GabiFodorrasRO]

Super...big like !!!

[@CasualDIY]

Thank you kindly my friend glad you liked it 👍😁

[@tomaszzembrowski]

Super film! Dzieki!

[@CasualDIY]

Dzięki 😀👍

[@theimmortals1787]

& the sponsor is the Resin

[@Slannesh]

Any issues with the Acrylic lid now that you've used it some? I've seen a lot of conflicting info on if you should use one at all with an acrylic lid. If you make sure that the liquid resin or bubbles never touch the lid has it been ok?

[@CasualDIY]

So far had no issues but I always am very careful as you said that the bubbles never reach the lid. If I had the money I would go for the glass one. But as I said had no issues.

[@Boogerboys1990]

Say I stabilized a really irregular pice of wood with double dye . Can I fill in the rest of the wood gaps with an additional epoxy in the pressure chamber. Also can I use just a pressure pot to stabilize? Or nah

[@CasualDIY]

You need a vacuum chamber to stabilizale wood not pressure pot. Pressure pot is for casting when you add epoxy( resin) to a pice of wood that is fully stabilized. Hope that makes sense

[@Boogerboys1990]

@@CasualDIY thanks I found more info .

[@booyaa1851]

Great video, would love to have the kit but it’s an expensive set up. Very expensive. Stabilising isn’t something I have the time for. It’s such a long long process and dangerous when you have to leave that oven on. I’m working 50-60 hours a week

[@CasualDIY]

Same here mate, I have a normal full time job. When it comes to stabilizing you can say I'm at the start of my journey👍😁