Resin Basics which Resin should you choose - Resin Tutorial

[@CasualDIY]

Check out my other video on all the basic information of how to Mix Resin correctly - kzbin.info/www/bejne/gZmvfJaAl9GXiLM

[@soulhealer-ZA]

I was looking for the tutorial to start my own resin business.. just found your channel and now I'm your new subscriber🙂

[@CasualDIY]

Welcome aboard 👍😁

[@alyssainsertlastnamehere9248]

I literally was searching this and found your previous video for reducing bubbles and then this one today right when I needed it. Thanks so much!

[@CasualDIY]

Glad I made it in time😁 hope it will be helpful 👍

[@karlpopewoodcraft]

Great information Thomas looking forward to the saries.

[@CasualDIY]

Thank you kindly my friend glad you liked 👍

[@DaveGDesigns]

Mate great video if people are just starting out resin is a minefield. One thing I would add is like you said amazing clear cast is food safe as a clear resin but that may change if people add dyes or mica powders to it. Looking forward to the next one mate top job 👍🏻

[@CasualDIY]

That's a great point👍 there's so much that affects working with resin but at the same time that is what it makes it exiting 😁

[@ksarchcass]

This has been incredibly helpful. Very very well explained. I've never used resins before, but I'm interested in using it to make heels (high heels). I intend to make two types: Heels that will be covered with leather and clear heels that will have decorative elements within. The cured resin must be strong enough to support body weight and drillable. Can you make any recommendations? Thanks again. I will be checking out your other videos on the subject.

[@CasualDIY]

It depends where you are based not all brands are available everywhere. I would go for epoxy resin rather than poly as its easier to work with. Resin will harden very much but not all resins may be suitable for your application. You need to find one that is not brittle when it hardens. That should be in a technical sheet of the resin but I would also ask the manufacturer for that info. I have not used all the resins out there and there is a massive choice. I can recommend resins from Resin Pro - link in the description. They do have a wide range but I would probably go for the deep pour ones 5cm or even 10cm. They will cure longer but they are more or less self degassing, however a bit of help from resin pressure pot would make them perfect.

[@helenwada2801]

I want to do 5 of my daughter’s wedding bouquets that are now 4 weeks dried. I read I can do the epoxy and resin to preserve and even gain color in some instances. The resin and epoxy are not equivalent in measurement? My plan is to quickly dip and hang the flowers upside down but will the liquid be too thick to dip the bouquets? I will do this outdoor with low humidity and temp 74 degrees US. I appreciate your thoughts of my first time attempt. 😅

[@CasualDIY]

I don't think it will work like that unfortunately. Most likely you will ruin the flowers. You can do a pour, make a block of resin and flowers inside. Epoxy is a type of resin.

[@indrekpalm73]

Would have expected a comparison on these different types of resins. How clear, price difference etc. Just ordered ResinPro and soon will get GlassCast. So far haven't found one I would be totally satisfied with. The main issue is with transparent very thick casting seems yellowish.

[@CasualDIY]

I thought about that but then the video would be too long. It's long as it is now but it's a good thing that you mentioned that, I will try to do a video on in Series 2👍 glasscast should give you crystal clear casting same as resinpro👍

[@alexmladenov3491]

what are your thoughts on ResinPro as im thinking of purchasing it? cheers

[@nervouspenguins9982]

Big help. Well explained

[@CasualDIY]

Thank you for watching 👍

[@Hedghog6666]

Fantastic Accent... It's like Oli Gunner-Soljksaer doing a DIY video

[@CasualDIY]

Hehe😂

[@J.Everest]

Hello sir 🙏 could you please share your experience on which resins to build a FRP vessel... please

[@CasualDIY]

Sorry but got no experience with FRP vessels.

[@chelseaRiley-bv3hf]

What resin would you recommend for making keycaps for mechanical keyboards? I don’t have a pressure pot. Thanks.

[@CasualDIY]

This one should do the job resinpro.eu/product/super-offer-non-toxic-transparent-epoxy-resin-kg8-kg8-free-shipping/

[@saminarandoms3196]

Do u have a advise for me . I make my resin art in the garden and store it in garden because i was told its not safe to keep it in door as i have kids . How can i keep it warm do it cures in the garden

[@CasualDIY]

I can't imagine how you could do this in the garden. Starting with unpredictable moisture levels in the air, wind, potential dust, dirt getting to your casting and keeping the temperature right about 20-23 degrees Celsius. You would need some sort of a large tent with heating I can imagine. Difficult job I have to say.

[@beritblackie3168]

You’re so knowledgeable! I wonder if you’re able to point me in the right direction: safe resin for pet food & water bowls?? I’ve searched & searched (UK) and none the wiser... Much appreciated 👍🌸

[@CasualDIY]

Hmm I don't think any resin is recommended for that use. Check out ResinPro I know they got resin that is safe to come in contact with food. If all the FDA approvals.

[@beritblackie3168]

@@CasualDIY thanks so much for getting back to me! ⭐️⭐️⭐️⭐️⭐️

[@alexcharalambous1417]

Excellent mate. Very useful info and well presented

[@CasualDIY]

Thank you kindly 👍😁

[@sonamkim8101]

Great information thanks!!

[@CasualDIY]

Thank you for watching

[@andavalb]

Hi Tomasz, Looking at the glasscast 10/50 safety information as an example, it says no odour and no vocs but also says to avoid breathing the fumes/vapours. So are any of the resins safe to use with just gloves or are they all bad?

[@CasualDIY]

I think Art Resin hence it's so expensive. I wouldn't be using any resin at home.

[@BrancoWorks]

Good one Thomas! Keep them coming...

[@CasualDIY]

Thanks mate 👍

[@iraklipiranishvili3352]

thank you for being!

[@CasualDIY]

Thank you for watching 👍

[@Alex_Rdz90]

is this the same resin as the one they use for windshields?

[@grator]

the video starts at 2:18. You're welcome

[@josephchuks9290]

I appreciate ur video, i am new in this, i want to go into production of roof rack rail end cover in a car, and it is plastic, which resin would be suitable for the production process.thanks

[@CasualDIY]

I think that the resins I was using may be to brittle for that job. Not sure which one I would honestly recommend to you.

[@samng8681]

I have bought cht epoxy resin part A , cht indurente hardener part B, can these using for casing? I didn’t see the ratio on the product packing!

[@CasualDIY]

Sorry not sure what you bought exactly. Have you bought resin from ResinPro? If so the mixing ratio is always on the bottles/containers. They also add instructions to the parcel. But for some reason if that's not there then it will be on the website you bought it from in the description of the product.

[@aragureghian724]

Ah! Your shop looks like my Kitchens when I worked as a Chef! [Swiss trained...]. So so informative. Details and more details... I have to ask about the "Cactus Juice" you did not elaborate on and "Royal Palm" which you said is "very unique" but left it at that... Thanks for all your sharing. Best informative for sure.

[@CasualDIY]

Thank you. Yes it's all coming in the future videos👍 but I'll give you some info on Royal Palm resin. The unique feature is that it's viscosity is close to waters. Even part A is very fluid and after mixing is like water. That means it will penetrate moulds and castings easly and the air bubbles can escape with ease do no need for a pressure pot 👍

[@aragureghian724]

@@CasualDIY Thanks! That is an asset. Take your time... will be watching.

[@CasualDIY]

@@aragureghian724 thank you for your time👍

[@TimAches0113]

Hi I am considering a small business idea with Epoxy from my mums garage in England, one of my main concerns is the temperature. Have you considered a thermostat controlled heat mat that you can rest the mould on as it cures? They are used in vivariums for exotic animals and also underfloor heating. I was thinking as the heat source comes from the bottom up it could even assist in getting rid of bubbles?

[@CasualDIY]

Hmm that could be problematic. It could speed up the curing time of your resin🤔 its an interesting thing to explore tho. Let me know how you get on with that. I do see few issues with that but you don't know how well it will work until you try it

[@TimAches0113]

@@CasualDIY I will give it a try as im worried the garage won't hold enough heat to keep it to within the range! Ill let you know if it works when I get my materials, thanks for the info and great videos!

[@CasualDIY]

@@TimAches0113 thanks👍

[@dennishight4419]

Can you use a non toxic resin for coasters and trays?

[@CasualDIY]

You can use any resin you want, you just need to check if it will withstand heat from a cup if you make coasters. Just check the information sheets that comes with your resin.

[@annamariekassab18]

Hi Im from the uk too, Ive just bought DIPONDE Epoxyplast 100P (A) , it didn't come with any instructions, I haven't used resin before, do you think this will be ok? I want to do things like making moulds / resin trays / resin wood and canvases , can you please tell me how I should use this resin , Also could you tell me what would be the best resin for me to use for the things I said above. Thank you 😊

[@CasualDIY]

Every resin has it's own specifications unfortunately. There is no one solution fits all unfortunately. I never heard about this resin. If I was you I would try to get the specifications for this resin from the manufacturer

[@annamariekassab18]

@@CasualDIY Aww ok, thank you 😊

[@ThisOLmaan]

so i have the Amazing clear cast and reads to just mix in equal amounts but i listened to what was mentioned in ur video, now i just use in for small objects i use the silicone molds with the half circles, or small round balls, etc, what you suggest? or advise? you think i thought still mix on equal amounts? i do not have a digital scale or wouldn't know how to use it? well, hopefully, you can help out a Lad ty for ur video.

[@CasualDIY]

Hi, this resin has a mixing ratio of 1:1 by volume, not by weight. Check this link for the technical sheet www.alumilite.com/resins/amazing-clear-cast/

[@ThisOLmaan]

@@CasualDIY yes ty now i know not all Resins would work well with certain pigments, like Alcohol ink i need to find out which brand would work best for that type of ink pigment, thanks you much found lots of good info in ur video.

[@CasualDIY]

@@ThisOLmaan thank you for watching 👍

[@CircuitAngel]

Thanks for the videos. I’m in the U.K. and new to this so your videos have been very helpful. My question is: is there a particularly good mould release that you use? And can it be purchased in the U.K. I’m using silicon moulds with epoxy resin. Thanks you

[@CasualDIY]

Hi, Thank you for watching my videos👍 Yes you can find something really good that I was using here houseofresin.co.uk/macwax-mould-release-spray-400ml/

[@davidlacey6417]

Good video on resin,what type of resin in the 2 blue containers.Thanks

[@CasualDIY]

It's ResinPro 5cm cast depth 👍

[@davidlacey6417]

@@CasualDIY Thanks for the reply.😀

[@CasualDIY]

No problem 👍

[@anusharma5638]

Hi which type of resin is good for making costers and trays..

[@CasualDIY]

Resin with up to 2cm casting so you won't have to make layers.

[@amandarodriguez9079]

Can you use fans and/or a/c to decrease temps in high temp environments without it affecting the resin curing process?

[@CasualDIY]

Not sure

[@TheJewelryFantasy]

Wow! Dream! How many interesting things!

[@CasualDIY]

Thanks mate hope the rest of the videos from my Resin Series will be as interesting 👍

[@annabellalopez1844]

So if I use the Walmart resin would it be okay to use or should I not having a hard time deciding which gallon is great

[@CasualDIY]

Sorry got no experience with the Walmart resin

[@annabellalopez1844]

What big gallon resin do you use

[@CasualDIY]

@@annabellalopez1844 I use resin from ResinPro up to 5cm casting

[@rohankumara8712]

Very usefull. Thanks.🌟🌟🌟🌟🌟

[@CasualDIY]

Thank you for watching 👍😁

[@preethas7710]

I heard epoxy resin without a respirator is very toxic and dangerous?

[@CasualDIY]

Some resins may be more toxic than others, cause allergic reactions etc. You should ware gloves and a respirator.

[@preethas7710]

@@CasualDIY I asked so many ppl and you are the only one to respond - thanks 🙏🏼😊. Is there any resin we can use without a respirator? Acrylic resin (liquid glass) or mod podge ? I want an adhesive to stick crushed glass to canvas and prefer an adhesive where I do not need to wear protection. Would greatly help if you can provide a response 😊🙏🏼.

[@corneliabutnaru2784]

Hi! What do you think about the resins from epideco? Thank you!

[@CasualDIY]

Not used them before... sorry

[@corneliabutnaru2784]

@@CasualDIY Thank you!

[@bricofast]

Great video,tanks top 🇵🇹🇵🇹🇵🇹

[@CasualDIY]

Thank you kindly👍😁

[@N_O_R_R_I_E]

Can I ask where you buy your resin from ? the one you use most please. I'm looking to buying Glasscast but it's rather expensive

[@CasualDIY]

Hi, I mostly use resin from ResinPro. They got a great selection with very good prices. In this video description you will find a link to their website and 10% off code. Check it out it's very good. And they got everything you would need for resin casting. They ship to most European countries and even the shipping costs are very low.

[@N_O_R_R_I_E]

@@CasualDIY awesome, thanks buddy very much appreciated.....I royally messed up a model I was making today...heated up my resin, poured it into the mould as it was clear...it then released the seal due to the heat and 1kg of resin all over my kitchen lol :-(

[@CasualDIY]

@@N_O_R_R_I_E Wow that's a bad one mate, feel sorry for you

[@N_O_R_R_I_E]

@@CasualDIY LOL ! yeah I was gutted ! trying to make a special gift for someone....now half the resin has set....im hoping a second layer wont make it look stupid

[@CasualDIY]

@@N_O_R_R_I_E Hmm sometimes that may not work well specially when the first layer is fully cured and hard... try that resin from ResinPro it's very good and the price is fair as well. If you pick the one with up to 2cm casting them just watch out it will shrink slightly, so try to pour a bit more in your casting 👍

[@krizraebataller9719]

wood resin and carbon fiber is the same? thankyou

[@CasualDIY]

All different stuff

[@sumosprojects]

Man that’s like learning Chinese for me 😳🧐 but I’m going to give it a shot, is it food safe ?, that’s normally answered with differing answers 🍻👍

[@CasualDIY]

Hehe it's not that bad mate, give it a go👍 not all resi s are food safe, you need to check that in the technical sheet. But remember as the resin may be safe to get in touch with food the pigments, dyes etc may not be so you would need to check that as well 👍

[@Keith12001]

Very good and helpful, thank you

[@CasualDIY]

Your welcome 👍there is few more interesting videos coming out soon as well👍

[@narendralourembam3935]

Are floor epoxy same as those table top coating epoxy

[@CasualDIY]

They are all different, the variety is massive. So if you are looking for something specific for a particular project then read a technical sheet of resins that you are interested in. All the info is there and you will be able to tell which resin is best for you👍

[@narendralourembam3935]

Ur video is of great help to me

[@CasualDIY]

@@narendralourembam3935 thank you, glad that I was some help 👍😁

[@historyishis-story4250]

What country?

[@CasualDIY]

Poland now, UK before

[@robbristow]

Hi, Am I right in thinking that this series will be exclusively about casting resins?

[@CasualDIY]

All the topics are in the description of this video. So you can check out exactly what's coming 👍

[@robbristow]

@@CasualDIY Thanks. I guess the answer is 'yes'

[@CasualDIY]

@@robbristow It's all about resin, different aspects of it. Moulds, hdpe mould making and the full stabilization process 👍

[@Secret666]

Great and informative video, side question, are you German?

[@CasualDIY]

Thank you, I'm actually Polish 😁👍

[@Secret666]

@@CasualDIY Cool, I only ask as your accent is similar to comedian on tv :)

[@CasualDIY]

@@Secret666 oh which one?

[@Secret666]

@@CasualDIY Henning Wehn

[@CasualDIY]

Cool I'll check him out 😁👍

[@MrHabitat009]

@14:23 lol!!!!!!

[@ultralinx200]

1.25x playback speed work better

[@CasualDIY]

Specially with my lengthy video🤣

[@ultralinx200]

@@CasualDIY thats fine, i just dont like guessing what word to come 😅 btw, can i mix 2 different brand epoxy and hardener? I mean, epoxy resin from Company X, mixed with epoxy hardener from company Z

[@CasualDIY]

@@ultralinx200 no as they may be totally different formulas and chemicals involved not to mention mixing ratios may be different. I would not recommend that.

[@chiwashington1645]

I think his voice is sexy, I can listen forever... that aside amazing video they are so hopeful

[@CasualDIY]

Lol thank you kindly

[@theOGLC]

His voice kind of reminds me of Russell Brand

[@chiwashington1645]

@@theOGLC are u from America 🇺🇸

[@PlayafromtheHimalayas]

Too much yapping bro. This video should be no more than 5 minutes but you obviously like to year yourself talk.

[@CasualDIY]

It takes as long as I think it's necessary😁👍