DIY Christmas Ornaments made with Longer Ray 5 10W laser | Plus free downloadable files

DIY Christmas Ornaments made with Longer Ray 5 10W laser. Plus all free downloadable files for the projects presented in this video.
Super Powerful 10W Laser Engraver Longer Ray 5 | Testing Plus Review - • Super Powerful 10W Las...
This video is sponsored by Longer who provided the laser longer Ray 5 for testing, review and projects. I have not been asked to say nice things about the product and all the information provided in my video are my own thoughts and experiences with this product.
SHOPPING:
SUPER SALE Longer Ray 5 (Promotion date: 20.11.22-30.11.22) - s.zbanx.com/r/...
Longer BLACK FRIDAY SALE - s.zbanx.com/r/...
FREE downloadable files for your laser - www.patreon.co...
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co....
Shop on Banggood - www.banggood.c...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/...
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/u...
Web page - www.casualdiy.com
Email - [e-mail]
#casualdiy #woodworking #longerray5
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

[@CasualDIY]

Check out my Christmas projects playlist - kzbin.info/aero/PL3AlKP5QE9tkiRaZBxqaE2S2u2INd5R4P

[@hansdegroot8549]

Great demonstration of what laser engravers are capable of. Thanks for sharing the video. The 3D ornaments are ingenious.

[@CasualDIY]

Thank you. Yes they look awesome 😁👍

[@steveprice1620]

Truly inspirational, you make projects that would have been previously complicated for most people, easily achievable. Thanks Tomasz 👍👍

[@CasualDIY]

Thank you very much!

[@chrisharrison6532]

Good lad tomasz for sharing your ideas with us you made some fantastic videos and I look forward to many more

[@CasualDIY]

Thank you kindly 😁👍

[@goldcountrywoodcrafters29]

Thank you. Just getting started laser cutting. Great information to get my creativity light shining. Very well presented! Take care.

[@CasualDIY]

Thank you kindly

[@TheGameRaider]

Thank you so much for this video. I've been looking for something that is decent quality and goes through the process in detail and this is the best!

[@CasualDIY]

Thank you kindly

[@MCsCreations]

Brilliant, Tomasz! Fantastic work! 😃 Yeah, a laser like that can help a bunch!!! Stay safe there with your family! 🖖😊

[@CasualDIY]

Thanks mate, yes its a great tool. All the best 👍

[@johnvodopija]

They are some very cool designs Tomasz. Cheers 👍😎🇦🇺

[@CasualDIY]

Glad you like them! Free to download and use if you want. Good for laser but also as stencils for scroll saw.

[@andrewpaley9914]

Great tool I wish Santa would send me 1 for Christmas

[@CasualDIY]

Would be a nice present from Santa, instead of the usual socks 😅

[@leelipinski4667]

Nice job Tomasz. Nice flip top Mitre saw cart. 👍

[@CasualDIY]

Thank you very much mate 👍

[@leelipinski4667]

​@@CasualDIYHi. Still comment came through on the wrong video. Hahaha. I was typing it at the end of the Christmas tree video then it changed into this video. Sorry.

[@CasualDIY]

@@leelipinski4667 no worries at all 👍

[@DGLaserCraft]

Thanks for the video - great information.

[@CasualDIY]

Thank you for watching 👍

[@CasualDIY]

SHOPPING: SUPER SALE Longer Ray 5 (Promotion date: 20.11.22-30.11.22) - s.zbanx.com/r/U89Co8Ssl0hd Longer BLACK FRIDAY SALE - s.zbanx.com/r/5wfyK1PkeJYu

[@monkeysausageclub]

You could even fill the stars with coloured epoxy

[@CasualDIY]

Yes, that would be a cool effect

[@barry.w.christie]

Just shows what you can achieve with a cheap'ish laser, even if you have no artistic abilities (like me), there will be tons of free stuff on the internet which you can use ... excellent 👍 Especially liked the last item, would've been even better with a few different coloured gels over the LEDs.

[@CasualDIY]

Yes mate you can really make some cool things and amend them with your creativity. The imagination is the only limit here 😅

[@GabiFodorrasRO]

Big like !!!

[@CasualDIY]

Thank you my friend

[@kenthesparky178]

Hi Thomas,great project,how about glueing on the stars as a fourth level after painting them silver.

[@CasualDIY]

Sky is the limit mate, or my imagination in this case 😂

[@philbrandon0532]

Hi mate... Top ideas again, I've got a NEJE 2S Max 30w laser setup myself, and churning out miniature houses/baubles/door signs/reindeer and sleigh combinations... The laser has a top working area of 800*610mm and gives more option with size limitations. Cost effective, if you can find a decent supplier of laser plywood, but you have to compete with high end laser production sellers also. May I suggest using lightburn software for the laser, you have just a one off subscription and endless options to use with the laser, but I noticed traveling lines between each cut location? You will need to check the software to adjust your laser settings. Keep up the good work 👍

[@CasualDIY]

Good setup there. Yes it all depends if you can tap in to your local market I guess

[@philbrandon0532]

@@CasualDIY check your software settings for the laser, think I can see faint travel lines between cutting locations? Are you using air assist?? Give a light sanding to remove edge burn marks also, what setting are you currently using for speed/power/pass to burn? I run 400mm/min on 80% with 2 passes for 3mm plywood (keeps edges cleaner) and air assist. 1 pass would be enough but it darkens the edges more..

[@CasualDIY]

@@philbrandon0532 it depends which laser Im using. With Ray 5, 150mm/min 100% power for 3-4 mm ply, single pass. But as you say I think it would be better to increase the speed and just do an extra pass for better results.

[@mauriciomendoza7375]

Podría ser en español o por favor gracias

[@CasualDIY]

Sorry I don't speak Spanish

[@i93mcc]

nice work. can you tell us setings for speed/power you use? for engraving and cutting? how often you clean the lents? thanks

[@CasualDIY]

I do show the settings in the video in LaserRGBL. I clean the lense depending on use, heavy use I clean it every two days. Sometimes daily (laser works at least 12h per day in the cutting option) it all depends.

[@i93mcc]

@@CasualDIY thanks a lot. all the best !!!✌

[@mauriciomendoza7375]

Que tipo de programa utiliza

[@CasualDIY]

I used to use LaserRGBL but now I use Lightburn

[@GabiFodorrasRO]

Hello Friend !!! What is the maximum thickness it can cut?

[@CasualDIY]

According to the manufacturer up to 2cm in pine wood. But that's in many passes with heavy charing. I would say up to 8mm plywood and 1cm pine wood for best results.

[@moniquewaddell9522]

Hi, was wondering what software you used? Thanks

[@CasualDIY]

LaserGRBL however recently I went for Lightburn and it's much better but paid.