Cat 235C Mass Excavator

[@staggerinstanton56]

Man what a beast. I miss when equipment sounded like that.

[@treeclimbing7798]

I can Smell the Exhaust..cough..hack..luv it.

[@Nighthawke70]

The boss rolls up to the foreman lounging in a hammock; "Are they working today?" Foreman just glances over at the field, noting the turbo roaring to beat the band and enough black smoke to piss off the Sierra Club.... "Aye, that they are."

[@idreamofdragonso5677]

Thats funny

[@jackking5567]

A beautiful engine sound.

[@seansmith720]

good seeing Charlie again....heck of a guy he is.

[@Graveltrucking]

Charlie likes his antiques that's for sure, new and trendy isn't in his vocabulary, he's a good man he makes money with the old iron.

[@cotontop3]

You could hear that turbo and tell that's a big motor. It's probably just something in the control valve why the bucket don't want to curl or packing inside the bucket cylinder needs to be repacked. Good looking machine though.

[@Jpaydirt]

3306 Cat engine 638 cubes

[@Jpaydirt]

Nope☻ I'm your resident know it all at your service 24/7

[@Jpaydirt]

jim smith What rain?

[@Nighthawke70]

I'll wager the cylinder shop will look at that piece of crap and wonder what landfill you dug that out of....

[@matthewjordan4085]

@@Nighthawke70 bull shit that thing is better than the next gen cat bull shit

[@bosshogg3548]

Love how you cleared your throat

[@adambryant2434]

When cat made a machine that would last

[@jamiemagdeleyns9152]

😂

[@davestinson5691]

How does the 1 travel stick work ? Never ran 1 of these. I bet that thing is a beast when mechanically sound

[@rogerofrhodri]

As long as the diesel was clean, the smallest bit of crap and they would splutter like a granny on 40 Marlboro a day

[@scottmcmillian2990]

pedal on right is forward left pedal is reverse, choose direction with one pedal and the stick is like a steering brake push right and and it turns right and vice versa

[@simonrichard9873]

Ever cleaned the air filter?

[@DAMEBRAMAGE]

Beauty of a beast!

[@jorgefonseca9225]

i operate the same model over 3years is one of the best escavator from CAT never die

[@rogerofrhodri]

They would out dig anything back in the day.

[@miiigi]

Eco friendly 😂😂😂 Awesome machine 💪🏼

[@carolinafarmweld5981]

Looks good for that many hours, tell Charlie he needs to put more videos on KZbin

[@copperheadmarine]

Ive been working on a job where no pictures or video are allowed. Been there a year and a half.

[@carolinafarmweld5981]

+copperheadmarine I understand, just curious

[@gangesexcavating]

Excellent work, Charlie.

[@mjethier]

that thing looks like it has/had some sack back in the day. I'd take at the right price

[@Drew6709]

First I've heard of a 235 being a mass excavator. Thought the 245's were the only ones made ME's.

[@supervanll]

It indeed surprised me to.

[@73DiamondReo]

knew charlie was going to be involved

[@lindro123]

No shortage of them old Cats in your area!

[@letsdig18]

if charlie is around there will always be one

[@calebjones2341]

I’m guessing it’s not a teir-4 😛

[@Bearcats737]

My kind or excavator, big, loud, and she blows soot

[@GARDENER42]

That soot is $$$ going up in smoke.

[@MrMan5014]

Pretty rare machine!..not many ME 235’s around!

[@hiscifi2986]

Just had a thought, the hydraulic suction filter could be blocked... That usually slows things down a bit..

[@jamesvos3089]

Put a lot of hours in on those old 235's, hated the single stick for traveling and a lot of other things about them but good machines . those things were under load when the pumps kicked in. Had the same problem with bucket curling, it stopped because it was trying to go both ways at same time, I know they rewired it and changed valve and it fixed it and the other gremlins it had.Last 1 I ran with a hammer they used to push me around with a 992 because the tracks were so bad it wouldn't travel.

[@letsdig18]

haha thats what you call getting your moneys worth!

[@pauliusbucionis3921]

james vos

[@모른이름]

james vos 1♥♥♥♥♥♥♥♥♥♥8♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥♥

[@farminginmissouri4308]

Just a quick question. Will it track around or is it not able to move

[@soupy8181]

That thing sounds good, definitely ain't no regeneration or def fluid bull shit on those. Although I love my new F series model excavator I do wish I could hear the motor and turbo whine a little bit harder!!

[@rbn_hmrs541]

A lot of it is actually lost to damping, because emission is not just exhaust but also, sound. But i agree, a Straight Piped 235 sounds awesome.

[@B422TMack]

Learn Something new every day . I Never knew Cat made a 235 ME . Wonder if it's a problem with a valve ? That 3306 Cat is Rolling some Coal . I Put my fair share of time on 215's & 225' Cats . Never was crazy about the travel Stick in the center of the floor .

[@letsdig18]

yeah its kind of awkward if you have to use the boom to pull you while you track and then have to turn you have to hit it with your leg

[@bert26a]

They were a good machine at one time and I still think they are but to find one in good condition these days can be tough. I always like the steering stick always found it funny that some people couldn't handle it.

[@kathyzeilinga258]

bert26a bh

[@tonymartin4255]

best steering system ever fitted to an excavator why they ever dropped it I don't know just my.02c worth

[@gangesexcavating]

Was this a purchase?

[@catdieselpower193]

EH she just needs some tlc boys! good Ole girl rite there!!

[@t5jerry]

Boy do I have memories of 1 of these "cats" ! Perspex windows, instead of a proper seat, the owner (my boss) put a cheap crane seat in it, hydraulic oil on the cab floor as it CONTINUOSLY leaked hydraulic oil, tracks came off on a REGULAR basis, but would it break down ???? NO WAY JOSE, IT KEPT GOING AND GOING unfortunately !!!!!!

[@ChetRobbins]

Where is it and how much ???

[@MatthewHoag77]

235 Mass Ex? Somewhere Vantagetes is having a good chuckle.

[@slobodanmartinovic1216]

Nice video ! CAT excavators are awesome , but this good ol‘ piece of iron needs some serious overhaul before it‘s put to work, ‘cause it looks like it‘s been there for a while .

[@janvandenbos7085]

Cat is smoking very much, burning oil, what do you think Chris 😊

[@dieselman8v923]

Wouldn't say burning oil from that black smoke but she seems a bit low on power. I would start with fuel and air filters and go from there if it were mine. With 13k hours it probably a bit tired haha.

[@matthewmassaro5278]

black smoke is not burning oil its un burnt fuel.

[@leebarnes655]

Matthew Massaro, exactly right there, but it shouldn't be blowing that much smoke after the turbo is spooled up. Bad match or completely worn out engine? Hard to believe it came from the factory smoking like that, but those may have been 'not so green' then days? Tired ole girl needs some TLC -- STAT.

[@letsdig18]

13k hours is just broke in for him, all his 225's have over 20k hrs

[@letsdig18]

its power! lol

[@idreamofdragonso5677]

What size bucket is that?

[@lukasmuff594]

New Excavator ?

[@NZDIRT]

He bought this one didnt he? Little bit of work itd be ok. Charlie has a few c series cats.

[@dakotas3985]

Man that’s got a short boom and a big bucket

[@hiscifi2986]

does it need all that revs..? It's stalling in the dig..

[@haroldbrown1389]

The old gril seems awful tired.

[@rebeljordan23]

He must run John Deere controls lol

[@polishedturds6677]

Jordan Paul thought the same thing. Nice

[@brandonb1118]

There is nothing wrong with jd controls it's all What you learn on. Our company all runs John Deere controls on John Deere excavators . Any one who thinks the controls make an operator is just a cat fan boy . I used to run cat then I switched to John Deere because it's actually logical with the movements you input . When our operators can dig surfaces within a quarter inch of level is sand or clay I'm impressed .

[@omarzaragoza2797]

@@brandonb1118 i was taught on cat controls i can run jd but i wouldnt trust myself around utilities

[@johncook3125]

Useful old beast. I love old industrial equipment especially massey ferguson thought you don't see to much of that now.

[@regsparkes6507]

That bucket curl cylinder not working ? I notice too, that he didn't raise the tracks and check forward and back rotation . With the amount of fuel that'll go through in a day, it's going to be an expensive unit to operate. If that were a truck, it would be in the region of some 402,000 miles on it !!! I'm thinking Charlie better look long and hard at this before he lays down his hard earned cash on this one.

[@mfreund15448]

Tell Charlie to get back on his own channel and put something up!.

[@FLIKRxPro]

What is charlie's channel?

[@powerram92]

+FLIKRxPro what is it

[@lindro123]

+FLIKRxPro copperheadmarine

[@leebarnes655]

copperheadmarine

[@powerram92]

thanks

[@Wolfhound.]

bad switch in the stick or what you thinking

[@mikesecondo2254]

Good ole service days as a field service tech...was fun back then...no laptop..no c.e.l.

[@simonrichard9873]

Tony Beets would love it

[@joshuasuddethjs]

Simon Richard or Todd haufman

[@drivefast6191]

Simon Richard 😂 yeah for this dredge

[@drivefast6191]

josh suddeth parker schnabel 😂

[@rishiviner2477]

todd is fat

[@ryankirkland1844]

nuthing runs like a cat

[@AlwaysDigging16]

Man all the hate just cuz she's old. Seemed pretty strong to hog Dirt without any bucket curl. Try that with a new machine.....

[@daveschuetrum576]

I think I would pass on that one. There are always other deals around.

[@radketim]

Did you call before you dug?

[@madjack1748]

Cat's version of a 235 is a 450 by most standards.

[@CJPhillips6648]

how about a video on buying equipment?

[@rubenbraekman4515]

She's got it where it counts 😍

[@volquardholthusen4625]

It smokes and drinks and some times it f...cks up....... just like it's ovner .-) LOL

[@davecalvo6418]

love the sound of that thing, bad @ss

[@raymondaston4796]

that load the truck up quick

[@tommylavilla910]

Oldie but goodie

[@polishedturds6677]

Fuck was he trying to do? Ive been working on this shit for 12 years now. Hard fuckin work keeping these things going.

[@skidlidzdg]

deal or not that's one tired cat

[@Theonetwo48]

I'd say the ole girl has hogged all the dirt she can handle. Rare find to be in such a shitty place like Lumberton though

[@DylanMariner]

Here that ol kiddy cat a Perrin

[@hughie9357]

Probably needs a valve job done and the turbo checked

[@jpa1282]

Not a lot of fun to run on a daily basis but that old iron is cool as fuck

[@frequencymanipulator]

Jeeez, that is a big one.

[@ironmulesmc786]

fuel milage measured in GPM? lol!

[@swampratt36]

gosh i dont miss those ol ragedy fuckers . use to run 235 and 245 in a limestone quarry hammer on 235. Fucking track motors were so weak had to turn with the boom scrubbing the ground lol. but once it was set it was a digging fool . had an 8.5 yd bucket and had a hell of a counter weight with a longer stick and boom . Ran the same 245"machine when it was nice on a pipline job setting 35k# lift stations . thanks

[@Joelontugs]

I think his life goal should be a 245 lol

[@canvids1]

need some work done on the motor it seemed to work real hard just lifting the bucket and boom and the black smoke is not good $$$$$

[@taiming71]

She is a old girl.

[@kawscottyoung]

Should've asked with reply below but given something that old and the risk of repair, what can you figure to get for scrap if the thing just can't be made to work? The yards around here are saying $2.25 to $3.00 per hundred. That seems low. Would there be a specialized yard that gives decent money for the old stuff? And given the cost of transport as well. How do ya'll figure a floor if the thing is scrap?

[@dannybailey5938]

valve bank maybe??

[@maplemanz]

I agree I have ran a few 200 series cats and always hated the wobble stick travel control.

[@VanillaG863]

Ow com the bucket ain't curling

[@thewalloftrump1761]

Filters are gone

[@theobserver7643]

why only 13K hours on it? we got a 324D what alrady have 18k Hours .... this machines need to work man

[@marinegomard2597]

R1 ́Maniac k

[@kathyzeilinga258]

R1 ́Mania

[@FishFind3000]

Has he never run an excavator?

[@dakotaswanson5488]

That thing is worn out and the bucket won't move

[@copperheadmarine]

Something is wrong with valve bank.

[@AlwayzPr0]

Looks like it don't work

[@joshoweragriphotography154]

how

[@bubblessamsquanch6478]

oh boy.. shes tired...

[@stop007gangstalkingkansasc3]

Rolling coal

[@AdvancedUSA]

The only Cat Mass Excavator of thar generation of machines was the 245. By today’s standards it wouldn’t qualify for the ME name.

[@jonlowe8727]

good lord. that machine needs some work. still OK though

[@MiniatureWorldYTChannel]

impressive!

[@Spazamazz]

well, i assume thats a no then haha

[@sayansrichal804]

Good Good

[@proven6270]

I'm thunkn' she dropped a cylinder or 3 ??? 😑😐 Ever find out ?? 😶🙄😣😥

[@OffroadTrucker740]

she needs some love. wouldnt offer too much for that baby though.

[@kawscottyoung]

What became of the old CAT?

[@smileybrotherslawncare9599]

That thing is a polluter lol

[@milkbones8617]

10 grand that's all

[@joetiller1031]

Money pit Chris.

[@johnkramer7161]

Chris wasn't the one looking to buy it

[@ClaytonHartin]

Only want 10k

[@50bottlesofoile36]

engine have highly exhaust

[@bintangcimeefa]

Turbo bocor...

[@MrJohndeere3720]

i'd run it. :)

[@lehungdung9048]

Tụt.

[@chrismooremusic4383]

Dinosaur

[@gabrielecampagnola8817]

To old, no strenght

[@swampratt36]

gosh i dont miss those ol ragedy fuckers . use to run 235 and 245 in a limestone quarry hammer on 235. Fucking track motors were so weak had to turn with the boom scrubbing the ground lol. but once it was set it was a digging fool . had an 8.5 yd bucket and had a hell of a counter weight with a longer stick and boom . Ran the same 245"machine when it was nice on a pipline job setting 35k# lift stations . thanks