Love your videos! Unlike most videos, where you just watch them make something, yours are teaching something, especially the last three!
@katievitale1685 жыл бұрын
You are absolutely excellent at explaining and displaying correct and incorrect practices! Thank you so much I love learning this hobby and feel so much more confident creating turning me with this knowledge!!
@NunyaDamnBidnessBud4 жыл бұрын
One of, if not THE best 'technical' videos I've seen on KZbin...and THE best I've seen on 'catches'. Thank you. Just subscribed and now I'm going to go 'catch' some more of your videos!
@RobRobBob9 ай бұрын
This is great, thanks so much! I'm just learning, and get some catches making beads, this is really helpful. 😁
@budj137 жыл бұрын
Tim I've watched a lot of instructional video on wood turning and this set of yours diagnosing the catch with the various tools is by far the best. The illustrations with the supporting and unsupported cuts are brilliant. You should publish this as a DVD. Top notch stuff from one of my favorite (and most entertaining) turner.
@stevesmith59527 жыл бұрын
Excellent series Tim. This really helps in understanding the right way vs the wrong way, and the slow motion parts are great. I have not seen where anyone else has done something like this. Nice meeting you at the show.
@ScrapwoodCity7 жыл бұрын
Really cool info! All those things have happened to me. Nice to know exactly what was going on in order to work safely and with better results! Always awesome when you get a correct cut that leaves a shiny surface on the wood, even before sanding! Thanks man!
@ultanmoore57704 жыл бұрын
Been looking for a video that finally explains why I was getting so many catches. Thank you so much for this, now to get practising the proper technique!!
@rickbrantley37577 жыл бұрын
Thanks again Tim, I'm trying to help a friend learn and your explainations and slow motion help immensely!
@robertcornelius35145 жыл бұрын
Very good video.
@gilgrace19157 жыл бұрын
I like the blue and yellow lines along with the green and red arrows. These make your explanations very clear...even to a novice. I kind of knew what I was doing wrong, but these videos make it crystal clear. Great series Tim.
@leeperkins64436 жыл бұрын
My favorite part was the sneeze. Very funny. And very good info.
@timberdish7 жыл бұрын
Much appreciated! Thanks for taking the time to make this Tim! :-)
@chrispyefinch48845 жыл бұрын
That was an awesome video and explanations. I live way out in the sticks with no turning clubs within hours so this was great information. Thanks.
@gagecolson7 жыл бұрын
You're the best Tim!
@theoddartisan29237 жыл бұрын
My fingers are crossed that you will do one of these videos for a skew next! I feel like I understand why they catch, but I must be missing something because I am always making "design modifications" because of that tool. I would love to feel more comfortable with a skew
@thegiordanos98414 жыл бұрын
Thank you so much!! I have been having problems with the gouge 'skating' and your clear/concise explanation was very helpful to me (a beginner)
@Mauroiltornitore7 жыл бұрын
Great video, Tim!! Cheers. Mauro
@jimmylovesbikes Жыл бұрын
Fantastic. I really jump when it catches, hate it. Need more practice. Thank you so much.
@MomusFilms7 жыл бұрын
Excellent explanation!
@williamswhistlepipes4 жыл бұрын
Great informative video👍🏻👍🏻
@tomasarguinzoni90227 жыл бұрын
Thank you for sharing the video
@jimkeown20744 жыл бұрын
Part 3, another triumph!
@firewoodmaker6 жыл бұрын
Tim, the video is excellent and the slo mo really helps. The arrows, blue and yellow lines help even more. This makes for a terrific instructional video. I have one constructive comment. In your voice over, you sometimes change the term you use to refer to a tool part or technique, and sometimes don't use quite the right phrasing. I'd suggest you listen to yourself with a critical ear and I bet you can find a few places where you could say something a little different that will be more clear to the novice turners who are your prime audience. Great job and very valuable.
@kreech682 жыл бұрын
great comparison for how to not get a "skate" !
@williamswhistlepipes4 жыл бұрын
Hi I’m just starting out and only have a few tools what came with my lathe. So I’ve been trying to turn some draw pulls from some old oak church pew legs. I’ve been trying to use a 1/2” bowl gouge with a finger nail type grind. It’s just catching all the time. So my question is can you use a bowl gouge for spindle work. Thanks you videos are very helpful. Regards Jim.
@royalvarez64367 жыл бұрын
Thanks for your generosity! BTW, great camera work--is this Brian's genius?
@woodturningwithtimyoder7 жыл бұрын
Actually this time it was mine. I didn't want Bryan in the studio with stuff flying around.
@davidshaper51467 жыл бұрын
If you think sneezing in your faceshield is bad, try dipping Skoal.
@mikethulhu265711 ай бұрын
I find that most of my "skates" happen when I'm doing a steep cut. If I'm cutting to the right and the cut is steep, it's hard to have the handle off to the left, as the steep wall of the cut prevents taking the appropriate angle. Any thoughts on this incidence? Just make sure I'm using the bottom half of the gouge to cut and go slow?
@joseluisdiaz89007 жыл бұрын
muy buenos los vídeos lo felicito lastima que no estén en español
@marekbernath987 жыл бұрын
hej do a slow motion episode with slow mo guys
@ron23827 жыл бұрын
This is a great series. I have had a lot of design modifications lately with acrylic. Do you think carbide tools are better for acrylic? I've had maybe 3 catches while turning wood. I lost count with the acrylic. Thanks for sharing
@theoddartisan29237 жыл бұрын
I have preferred using my carbide tools to turn acrylic (I've only turned acrylic for small things like pens). I think the benefit of the carbide is how easy it is to keep the tool's cutting edge in constant connection with the work piece. With traditional steel tools, depending on the cutter, you usually have the turn and tilt the tool as you make a cut which can make it harder to maintain contact with the acrylic work piece. Whether with carbide or steel, I find that the best cuts with acrylic are when it is shooting off like string instead of bits and pieces. This is only possible with the cutting edge being in constant contact with the workpiece, hence my preference for carbide tools with acrylic. I hope that helps...just one turner's opinion
@ron23827 жыл бұрын
The Odd Artisan thanks for the input. I didn't have the catches or chipping out with the acrylic pen blanks so much with traditional tools. I tried to turn some duck calls for gifts and the acrylic rod I bought for that must be harder or higher quality. My tools dulled real fast, and the catches/chipping was bad. I switched to a large round carbide tool, and was able to finish without much fuss.Thanks for sharing
@WigglesNation5 жыл бұрын
I like how you use exotic expensive wood to demonstrate catches and not the cheap o soft pine or something haha.
@isaacmason39393 жыл бұрын
I would describe pine as one of the top 3 worst turning woods I've ever used. Because it's a fast dried soft wood, it just gums up the tools so quickly. Walnut and maple are my favourites.
@royalvarez64367 жыл бұрын
Tim are you going to have these videos available at SWAT? Also, are you hosting a demo session in Waco? If so, what is your project? Look forward to seeing you there.
@duallygsd7 жыл бұрын
Right now they are only available for free on KZbin. We realized that this was too important a series to limit to a DVD. It is our small way of paying it forward.
@muddbogginredneck7 жыл бұрын
have the tools ever been damaged enough that you would need to sharpen, or replace it, when you end up with a catch?
@duallygsd7 жыл бұрын
Only if I managed to hit the spindle or tool rest with the tool edge. In the Roughing Gouge video you can see in the first catch sequence that there is a sliver of metal on the tool edge. That came from hitting the spindle. The tool still cut nicely although it is a Thompson Tool and they are extremely tough.
@Ryan_19207 жыл бұрын
Hey Tim I need some professional turning advice.
@mmchap20004 жыл бұрын
I cant believe i just dropped about $1500 on lathe and tools... I am scarred to death now of doing this. I dont understand the approach angles at all!! :(
@chrisxdegroot7 жыл бұрын
I really like your video's. I watch them all. In doing so i find that your intro is way to lang for my taste. I'm 1min20 into the video before the fun starts. That's to long to look at every time. I know i can fast forwart, but still.... This is just a suggestion for further improvement...
@rallywagon2617 жыл бұрын
that's the way his sponsorship works. Most of his intro is advertising, which is no doubt a requirement from those companies.