Caterpillar Monster Tire Repairing || Repairing A Huge Old Tire Sidewall || Tire Repair

This video will show you how to quickly and easily repair a caterpillar tire sidewall. You'll learn how to patch the sidewall and prevent further damage. Watch the video now to get started on your repair.

[@Michael-fw5ef]

This man is tough - no eye protection, no work boots and he still flourishes.

[@marvinfruth1892]

He's wearing a mask😂

[@franktutut2678]

Protection of what,we live in a dangerous world,what is Palestinians or Ukrainian doing to protect them selves

[@keithrothman7253]

He is not tough; just poor.

[@diegorodriguez1554]

Protegido por cristo rey 😎

[@fabricioireno4272]

​@@diegorodriguez1554Dr Rey 😂😂😂😂😂😂

[@DM-by2fp]

Wow that blade is incredibly sharp!! anyone who has tried cutting off a simple car tyre from a wherl rim will know just how hard the tyres are to cut, impressive!

[@dyer2cycle]

would very easily slice off finger ends, too, I presume...I cringed when he was pulling it toward him with his fingers just millimeters away...

[@goodo5691]

so would my kitchen knife@@dyer2cycle

[@StudioDaVeed]

@@dyer2cycle The video being sped up 2x makes it look more haphazard.

[@rsz90182]

Have you ever tried cutting rubber that thick? It's easy with any sharp blade. As long as it's close enough to sharp.

[@moe6806]

pretty sure that was a chisal bit for an air hammer. just slightly modified / sharpened.

[@sammyc6405]

There is a deep satisfaction working with your hands. The skill in this man's hands is masterful. God bless him and his family.

[@Amathusukx]

Bet He's doing for penny's as well

[@alexandrpravda4700]

​@@Amathusukxты не спорь, это и без тебя понятно, а работай и созидай как этот человек.

[@Amathusukx]

@@alexandrpravda4700 Что еще обиднее, что людям приходится так жить, не желая жизни в суматохе.

[@alfa757]

Speriamo che non si riproduca!!!

[@julianp4787]

I seriously hope these hard working men are getting royalties for these vids ! I would like to know Thank you

[@jupitereye4322]

They aren't.

[@shanoemichael4439]

I AM HERE TO LET YOU KNOW THAT THEY ARE NOT AND WILL NEVER BE PAID FOR THESE VIDEOS THANK YOU FOR YOUR CONCERN!

[@shanoemichael4439]

IF U WANT TRANSLATION THERE ARE BASICALLY SAYING WE ARE GOING TO SELL THESE TO DUMB AMERICANS AND LAUGH WHEN IT POPS WHILE THEY USE IT!

[@markgriz]

They don't even bother to wear eye protection, I doubt getting youtube residuals is at the top of their priorities

[@logik969]

It's a re-posted video.

[@Sarah_Swede]

Unable to see the finished repair at the very end because of the stupid ads for the next suggested video, Thanks uboob for ruining the video. That is such hard work. Just imagine what this man could get accomplished in a properly tooled shop with good equipment. Impressive, most Impressive.

[@neunildogusmao2206]

9

[@allmech_BMW_fault_finding]

I thought the same. What an anti-climax. I find myself watching loads of these vids at the moment. Fascinating stuff

[@NikolaBogdan-dm8ph]

😊😊​@@neunildogusmao2206

[@douglashairston7808]

Good post, Sarah.

[@GSSurry]

100% agree. I feel like giving this video thumbs down.

[@MrStevecrasher]

I am in awe of your work, the heat, grime, pain… I can feel in my nostrils, God bless you.

[@RM-ci7be]

I hear nostrils of Olympic runner too

[@sheguworldgraphics]

You need a face mask

[@renebravo7582]

Ve al médico, no es normal sentir eso en la nariz al ver un vídeo

[@misterx2985]

Дааа, жилистый мастер! Такие огромные покрышки один катает и приподнимает!👍👍👍

[@mr.meeseeks8230]

В СССР бабы рельсы меняли😂😂 Наверное в душе хотели гироскутер и смузи. Но ссука приходилось. Этот мастер в день пару баксов получает.

[@user-fw9qx4xk9w]

@@mr.meeseeks8230 в год

[@user-tf9ln6cs2p]

@@mr.meeseeks8230 ."Пару баксов"- это если мастерская не его - но судя по его раскованному и весёлому поведению - мастерская его - так что далеко не пару баксов. (там одной новой резины что он наклеил на "пару баксов".

[@user-xu2xk1vv4p]

Потому и жилистый, что в одного и катает и поднимает покрышки

[@telemaster102]

❤

[@user-ib2vo6rt7j]

Такую покрышку только выбрасывать. Такой ремонт возможен, если на этом колесе куда то надо неспеша доехать. Работать под нагрузкой на ней смертельно опасно. Никогда так не делайте!

[@renanrodrigo4101]

Talvez seja para máquinas agrícolas.

[@user-rp5yy4se1z]

они так 20 лет делают ,а ты спец видимо во всем ?

[@andrey6009]

@@user-rp5yy4se1zТам были волока прочности из кевлара, произведенно под выским давлением. А они на такую огромную дырень, просто резины наплевали. Давлеение в такой поркышке 800 PSI, не меньше.

[@user-rp5yy4se1z]

@@andrey6009 ага 8000.

[@raymondmumford6255]

So much respect for this man and the work he does ❤

[@JohnnyOla511]

It's the exact same method used to patch sidewalls in the US just on a large scale

[@beendoneagain]

I'm going to give my respect for the person stupid enough to drive with it.

[@rayRay-pw6gz]

I had to take a nap after watching him work so hard. 🇺🇸🍺

[@dougmilne8425]

Totally agree. I also suspect he doesn't get paid nearly enough for his skill level.

[@stevefoley4073]

Incredible! They did what I thought was impossible.

[@user-jk8yv9yh4t]

I hate the part replacers in USA, and they call themselves mechanics. I had a nail barely on the side, they wouldn't patch it and offer me to sell a new tire almost $50 dollars more than I paid on amazon. That infuriates me even further so, I take it to an Asian, he does it and don't even charge me. Funny thing is, I don't even remember which tire it was now and its been well over 2 years.

[@juanpazmino6604]

Excelente trabajo trabajo de reconstrucción del neumático saludos desde Ecuador bendiciones.

[@jimf.625]

What’s really amazing is the workers still manage to keep all ten toes.

[@Spedley_2142]

Would love to see what the tyre manufacturer makes of this repair. Obviously they don't recommend it but would be really interested in their views anyway.

[@mellowfellow4755]

Horror most likely

[@Privileged-White-CrackHead]

It has been approved by the Dept. of Transportation 100%. OSHA approves of the work environment. Dept. of Public safety approves of his OPEN TOE sandals. And the EPA gives two thumbs up for inhaling hazardous materials. It's all good.

[@najeebkhan1265]

these vehicles are not used on roads.the new tyres are extremely expensive@@mellowfellow4755

[@fedecano7362]

they would be appalled yes...

[@claudioenriquesototapia9303]

Excelente trabajo una maravilla obra saludos desde Chile

[@karlaloaisiga7796]

I see you with a lot of admiration and respect because your work is not one, everyone does it with love and well done, for me you are great instead of throwing away you rebuild ❤❤

[@speedybuggy1677]

Very hard work but you can get it done you the man for the job very much great work I give you five stars ⭐⭐⭐⭐⭐

[@user-kc8xy3sl9x]

Корд покрышки, при боковых порезах, не восстановить. Работа, проделанная им, не стоит и ломанного гроша.

[@Youtube-crime]

Учитывая цену их работы в две копейки и бутылку воды,думаю это как-то выгодно заказчику. Тем более это все же не порез. Видимо сколько она ещё подходит после таких работ вполне оправдано ценой.

[@user-kc8xy3sl9x]

@@KZbin-crime Изучите, пожалуйста, что такое корд покрышки, и вам всё станет ясно.

[@Youtube-crime]

@@user-kc8xy3sl9x в просьбе отказано. Изучите пожалуйста,что такое экономика.

[@crystalgt8196]

Корд? Какой-такой корд? В покрышке еще и железяки какие-то есть? Не, они про это явно не слышали😂😂😂

[@Youtube-crime]

@@user-kc8xy3sl9x зачем мне это? Вы по русски читать умеете? Если ремонт покрышки будет стоить 100 рублей,а проработать колесо ещё сможет на 500 рублей,то есть ли смысл в таком ремонте,или нет?

[@user-vi7nj4qg2n]

Друг , береги здоровье, спину !

[@jeffyoung478]

With a good portion of the strength of the side wall removed it would be interesting see how long that patch will last.

[@janskeet1382]

Na, na, he has rubbed it with the magic wheel, all will be good, or maybe just slightly okay.

[@TooBlessedToStress88]

IKEA Furniture long

[@ImaOkie]

Longer than your new ev , that's for certain !

[@michaelbezoski3096]

Hard work for sure. I hope with what ever is made on these video's these men get some eye protection when grinding. Hot I know but to enjoy the fruits of all this labor it would be nice to have two eyes. Thank you for showing how this is done.

[@rangermiller9969]

I like the fact that they follow all safety procedures to the letter. Well done!

[@user-jw5ng5gg8y]

Great job! well done! I would never patch a sidewall damage, especially if used on open roads!

[@palangnar3588]

Remember this is Pakistan ,and it is different world my man ?!!!!

[@quackula9190]

Also no DOT or OHSA or any other regulators.@@palangnar3588

[@ersoy47]

Dose this tyre look like road user tyre?, its low speed tracks farm work or eart move track use this type tyre.

[@joslynanderson4681]

Genius craftsmanship mate blessed .

[@FlyToChina0071]

Amazing job. This guy knows what to do. OK, no safety protection, but I think that is not common in that part of the world. Regards from Denmark

[@ldiablo9921]

As someone with 20 years of experience managing a Bandag retread plant, I approve of this video.

[@pauldixon3089]

Amazing to watch this man at work. He's very skilled and knows exactly what he's doing. Made a perfect repair and the tyre is usable again and has plenty of life left in it. 👍👍👍

[@cheekygnome]

Repetitive tasks don't take a lot of skill.

[@davidbowden8362]

Suppose you are Jack of all trades but master of none.@@cheekygnome

[@paulandersen8396]

​@@cheekygnomeshow us how easy it is to shear sheep then

[@cheekygnome]

@@paulandersen8396 how would I do that? I've never sheared a sheep. That word "repetitive" means something.

[@davidclayton9383]

Bollocks would you buy a tyre from them .

[@oh2mp]

I have done similar repairs myself long time ago when I was working in a tire shop. I could use commercial patches inside and didn't have to make a patch from a piece of a tire like that guy. And we used an electric heater designed for that.

[@harounsamadi2527]

😂 You can learn here

[@alexeyn5380]

It is like aircraft serviced in Iran )))

[@saadtariq4316]

@@alexeyn5380 that's Pakistan bro

[@jayaramsn3666]

The skills and expertise required is very high and cannot be acquired overnight.

[@allamar9083]

Opinion,,,,,these workers are fantastic. They make do and work hard.

[@alexnadeev7661]

А корд как восстановить!? Это шина тяжёлого погрузчика и она после такого ремонта разлетится через пару месяцев!

[@harshabiliangady3211]

Job well done brother. God Bless you.

[@horstmuller7512]

These tires are made from recycled flip flops. And after these tires were scrapped, they are making flip flops from them.

[@josecoelhodeoliveiracoelho5851]

Parabéns prá vc que trabalha duro Deus abençoe a sua vida continue dando saúde

[@Nekto-is-Proshlogo]

Не будь те идиотом, невозможно мног работать, и быть здоровым. Это индус, у них в индии индийский фашизм, адская работа за мизерную зарплату, "ремонтируя" эту покрышку он потерял значительную часть своего здоровья

[@studentmai]

Заплатка без корда. Она вздуется и разорвётся при первой же накачке

[@nicudragomir3657]

Cel din interior este cu șnur!

[@zesergius9000]

Não vai estourar não...o trabalho foi muito bem feito... Esse borracheiro sabe como executar o trabalho

[@user-df2hd9lf7x]

@@zesergius9000 Мы вам верим. Молодцы.

[@viktorfahrenbruch2939]

я думаю если, этот человек имея своего рода станцию по ремонту подобных покрышек и он уже определенно не первый раз делает такой ремонт, то перед тем как взять заказ на ремонт, он очевидно знает в каких условиях будет использоваться эта покрышка и будет иметь его работа успех в эксплуатации или нет. В противном случае у них действует свой закон, при котором можно лешиться яйцев ответив за базар. Логично?

[@tractor548]

Какой закон???кому его тухлые яйца нужны???судя по условиям работы.там кроме грязных брюк ничего нет.купаются иакие люли 2ва раза в жизни когда рождаются и когда умирают.

[@DanielSpivey-dx3qc]

This man is a master tire technician His tire repair are perfect And his skill is amazing God bless you all Daniel

[@gertneukirch1120]

I´m impressed, more in view if you have had tried to cut the material of such a tire. Forget our exaggerated requirements in Europe,. The world moves better on when this works fit. My respect for creativity and practical realisation under the given conditions.

[@puncherdavis9727]

Yeah the problem isn't that the guy didn't try to make it good repair the problem is that once the sidewall is compromised the strength is gone. Would be interesting to find out how long this tire lasted before the sidewall family blew out again

[@magnusjonasson1987]

I dont know how long it lasts but, this is obviously not his first repair.

[@rethinkyourself1]

​@magnusjonasson1987 For sure that's not his first repair. He is fixing the same tire ever other day!

[@ShadowsOnTheScreen]

For an earth mover? I can see this repair lasting a long time.

[@dyer2cycle]

Well it probably has a big, thick tube in it when mounted, I doubt it would blow out...if something happened to gouge it again in that exact spot, I suspect it would be weaker than the surrounding area and damage again more easily, but the odds of that are probably small...

[@richardradawetz8788]

I give it two days on a loader

[@claudiosoto2447]

La verdad son unos SRS ARTESANOS COMO TRABAJAN MIS MÁS SINCEROS RESPETO BENDICIONES PARA TODOS UDS Y SUS FAMILIAS ASÍ SEA SALUDOS ABRAZOS PARA TODOS UDS

[@keatisakdaroj9415]

ไทยแลนด์ ยกย่องการซ่อม เยี่ยมมาก

[@josedanielmunoz8273]

De Argentina un genio maestro un gran abrazo

[@smac4621]

Love watching these videos. Just wondering, would it be possible to have a clamp on steel plate, front and back, into which you could inject molten rubber? You could place steel or kevlar matting to overlap the existing sidewall structure, then inject above and below through the steel clamped structure (thinking like a large sandwich press). Surely this would be stronger than multiple small pieces of thin rubber? And potentially a lot cheaper for nations of lesser income..?? Obviously I know very little about vulcanising, so this is meant as a question, and not a distraction from the works performed here.

[@mehmetozer4417]

Süper oldu çok büyük bir sıkıntımız çözüldü gerçekten çok teşekkür ederim

[@velayuthamkanitha9103]

Amazing Retrade Excellent Service God bless you Brother. Great Effort.

[@trickysubject8563]

Jawa’s hard at work in the background. 😁👍🏼

[@airfight10]

icadlar ihtiyaçtan doğar, çalışkan insanlar saygılar ! (türkish language )bravo nice work !

[@zizonajjar471]

ما شاء الله تبارك الله عمل ممتاز جدا الأخوة باكستانيون أو أفغان وهم مبدعون في جميع المجالات تحية من اليمن

[@ldnwholesale8552]

This is an earthmoving tyre, never subject to high speed. So while not ideal there is still a lot of life left in a very expensive tyre. This is often done in the western world as well. Done on truck tyres as well. Generally used on trailers however.

[@douglashairston7808]

Informative post. I did wonder how reliable patched tires are for heavy equipment. But you helped me understand that it depends a lot on how the tire is used. Thanks.

[@adanvaquero4445]

Me encanta como trabajan estos hombres muy comprometidos con el trabajo aparte muy profesional

[@allamar9083]

Happy to see the man wearing mask while grinding. I would give him my safety glasses if he was near as the tire grinding throws metal and nylon fibers everywhere. Blessings, hard work. Much respect from me.

[@AliAltaee-xk8fc]

الله يرزقك لانك فعلا مجاهد في عملك

[@user-ow1fo8ks4c]

Профанация...! Даже без перчаток))) я бы рядом с таким колесом не стоял и даже не ехал

[@rottmanthan]

would love to have some of that for things like atv tires, i am in the US and bought a tube of rubber stuff from over seas that you just squeeze out and spread, it cures fast and works good, looks like rubber and stays flexible, used it on some atv tire cracks, i still have some but was so happy with it i purchased another tube of it just to have on hand.

[@mschoi2383]

모두 수작업으로 하는 모습이 인상적입니다. 휘일로더의 중량이 엄천난데... 옆면을 때워서 쓰는군요. 이 없으면 잇몸이라고... 상황이 닥치면 다 해결할 수 있는 방법이 떠오르나 봅니다. 대단하세요^^

[@gordanvidak8622]

Je me lasse pas de regarder d admirer ces mecs si habile merci un régal !!!!!

[@jmcguckin]

It’s common in the US and other developed countries to retread and repair tires for large earthmoving equipment - giant dumptrucks used for mining, etc. as long as the bead is not damaged, you can retread a tire many times.

[@harounsamadi2527]

The west is waste mentality 😊

[@duac4508]

this is not retreading

[@MTLJack]

they are patching the tire, they arent rethreading

[@user-sd9de3el6z]

У нас пробывали ремонтировать, особенно кировскую резину (К-700), пластыри импортные закупали , но слабо она ходила, а потом дифицит сошел, копи деньги и покупай сколько хочешь новую и перестали. А на комбайны клеили, та подольше ходила.

[@arkadimich7329]

О бедность бедность....в самарканде до 94 года жили....какие сопли лечили сопли с колёсами... .зашивали порезы боковые ето на жигули...а на автобусе ездили до проволоки......

[@jeffingram9916]

My younger brother worked in India for 5 or 6 years in the 1990s and he said it was amazing what an Indian worker could do repairing things, casting new metal parts, etc.

[@sulaak]

These are Pakistani

[@jeffingram9916]

@@sulaak His experience was working in India but the ability to repair just about anything extends to most of the countries in that region. I've seen other videos of metal casting of huge gears and the machining and polishing to the finished product and the skills are impressive.

[@hen-hensuhendard5996]

KERJA YANG BAGUS , SANGAT PROFESSIONAL , MANTAP ........

[@KimNgocOfflClAL]

Hello 👍👍 cảm ơn bạn đã chia sẻ công việc 👌

[@williamwarnold6737]

I can recall many years ago as an apprentice, getting a pink ticket from the large engineering company I worked at . This for operating a buff without its guard. This resulted in a fine, taken from my wages the following Friday. ❤

[@georgepaiva7496]

Unions are great aren’t they

[@mohammadafzal3040]

Wow

[@Absaalookemensch]

@@georgepaiva7496 My friend, six finger Sam didn't like Unions either, but now he thinks they do some good with enforcing worker safety.

[@user-zq5yb5vl6s]

成る程、重機の低速用で更にチューブタイヤだからこその修理法ですね！ 素晴らしい☆

[@ScoutCrafter]

Excellent work! 😃👍

[@not.likely]

Such talented and hard working people. Masters at what they do

[@ismaelaguiar716]

Parabéns ao trabalho desse excelente cirurgião borracheiro! Deus o abençõe!

[@KimMorgan-hc3rk]

Though am not an expert in this type of giant tyre repair, I guess that the bonding process with the taping tool plus the final weight press,heat etc,sure makes for reasonable job?

[@cleniomartins8505]

Saudações de Brasília 🇧🇷 caramba aqui no Brasil pneu assim e jogado fora.. ai no seu país tem concerto parabéns show 😊

[@alexandrsherbakov9878]

Тяжелая, но нужная работа. Респект мастеру.

[@belooshee]

в чем она нужная? это шины уже не пригодный к эксплуатации по стандартам безопасности, эти люди - потенциальные убийцы, тк из-за их поделий могут погибнуть другие люди.

[@ramer31]

Фуфло это!

[@user-gb6kz6qd3u]

@@belooshee ерунду и бред пишешь. В СССР действовали десятки шиноремонтных заводов которые ремонтировалии шины для карьерной и другой спец технике где стоимость шин составляет значительную часть стоимости самой машины

[@sergioperegrino5948]

@@user-gb6kz6qd3u então é por isso que a URSS acabou?

[@mapefpada7681]

Even if the reparation is solid, the rest of the tire looks like shit, it will explode for another side, this tire is totally finished and dead. Too much work for nothing, not worthy!!

[@antonioribamar334]

Povo que eu admiro de mais São extremamente trabalhadores

[@LiquidScreen]

Great job. The repair will last for several years. Hope, someone pay good money for the tire.

[@user-qe4zw9kx9l]

나는당신을 믿어요 ㅋㅋ 이런수리공은 볼수가없다👏👏👍

[@yosihey9717]

When the side wall of the tire is broken, you must not repair it. The tire may burst by strength lack.

[@peter-pg5yc]

they dont go fast or go on hwy

[@dyer2cycle]

probably not much air pressure, either...@@peter-pg5yc

[@craighouchins3116]

It will be fine

[@smokeylovesfire1589]

This man has serious skills! I would guess this tire is super expensive so it makes since to repair it the way he did. I wonder if he can retread tires as well?

[@hornet99923]

Side tires are not repaired

[@Shsishsgsk]

Caterpillar monster tires is expensive and it's possible to rethread tractor tires as well.

[@tellyonthewall8751]

not skilled .. that is monkey monkey do .. and totally out of control or standards

[@IchliebeHunde58]

Makes “sense”

[@smokeylovesfire1589]

Great catch! Thx for showing me!@@IchliebeHunde58

[@shineprophet9161]

하.... 2거보니 눈물2 다 난다. 멋진 솜씨에 경의를 표합니다.

[@gilliard121]

Os cara é fera mesmo.....

[@rbhxtd4413]

Тракторная техника имеет 1-1.7 атм давление чтобы в землю не тромбовать. А на фурах 8-10 атм эта тема не работает епнет и головы не будет. На легковых тоже самое скорость другая вращения и давление побольше около 2-2.5 атм.

[@aslan_grozny3667]

Не думаю что они это первый раз делают

[@rbhxtd4413]

@@aslan_grozny3667 это тракторные колеса не на автомобиль если ты не понял

[@carlosmagnomota3928]

I didn't know that repair existed.. congratulations for the practice,,

[@AsssFidanken]

fantastico lavoro di riparazione, siete maestri nel riparare tutto senza mai buttare niente.

[@ricardini7338]

muybuen trabajo y Gran artesano. deberias haber dedicado unos segundos mas para ver tu trabajo terminado. Saludos desde Aegentina.

[@CACADORES-DE-EMOCAO-FSA-BA]

Ele não está usando os EPI equipamentos de proteção individual, correndo risco de acidente, no mais fez um grande trabalho

[@c.j.cleveland7475]

He starts wearing a mask while he's grinding on the inside @ 1:30

[@crazyduck8755]

@@c.j.cleveland7475 it's just a rag mask it doesn't protect

[@Istar_1990]

самое интересное в таких видео - это читать комментарии всевозможных лицемеров, которые в жизни не купили б подобные вещи, но всячески при этом их хвалят. У шины тяжеловесной техники на боковой стороне отсутствует металлический корд, но не беда, изоленту пару раз наложить и ремонт окончен. Можете с таким же успехом газовый баллон у себя дома изолентой или скотчем перемотать.

[@dmitrynikolaev355]

Изнутри положили финальную заплату с кордом

[@user-pb3uf7of4e]

При всём уважение, но резина толщиной порядка 2-3мм с основой(кордом), меня как-то смущает,папье-маше это здорово, но на грузовой технике это жутковато🥴@@dmitrynikolaev355

[@sverhcom]

@@dmitrynikolaev355 корд это каркас, он должен быть цельным, а иначе это не каркас, где логика

[@user-cq3yn9de8k]

Тоже первым делом подумал на он код восстанавливать будет.

[@user-xf8le1im2k]

Слушай умник эти ребята НЕПОБЕДИМУЮ СОВЕТСКУЮ АРМИЮ РАКОМ СТАВИЛИ а ПОСЛЕ и АМЕРИКАНСКУЮ без никакого оружия ДУМАЕШ ОНИ ТУПЕЕ ТЕБЯ ЧТОЛИ?

[@paulohenriquedasilvaribeir1239]

Paquistão, a melhor mão-de-obra do mundo!

[@Iamlookingforwoody.....786]

Excellent work, your hand looks like you are a very skilled person.

[@err0rmax239]

Интересно на сколько такая латка хватит😊

[@provokator-x]

Такой латки может хватить лет на 100 - 200, но только при одном условии: нельзя накачивать 😂

[@svenfietz7919]

good job,bro...very good job...we do do the same job . but easier...you have this skills,what we need..

[@ludovicguibert9864]

Bravo 👍. Impressionnant

[@dubioushumor9243]

That tire is something I trust less than a politician

[@cooldog60]

Not me!

[@daveticehurst4191]

The thumbnail picture is a con. That is a brand new tyre shown and is NOT even the same tread pattern as the one so called being repaired.

[@molderskully1569]

I always thought you men were lazy. Because most of the time see you as owners operators at Gas station. My bad have a new found respect for you. God Bless💯🙏

[@Old-Skull.]

Wherever you see a guy with an eye fucked up, don't trouble your mind thinking abut what possibly could happen to him , I think this video gives you a definitive clue.

[@betobeto9705]

Perfeito!

[@radaisakov4408]

Čestitam vam na uspešnoj popravci teko velike gume!!

[@shivarora7573]

Bade mehnat karte ho yaar aap sach mein kamaye koi khaye koi

[@user-nq4wo7ti8i]

Good!!! Nice day

[@jigglytofu]

With a certain load, it's bound to blow out again. I just hope the driver and any cyclist on road doesn't get killed. Sometimes, "just because you can, doesn't mean you should" comes to mind.

[@jakesmith6337]

Not a lot of cyclists in mines

[@johnstitt2615]

They do not live in the disposable/just buy a new one North American world.

[@hassanshayegannik155]

Bravo! Thanks!

[@joseonofredealmeida2634]

Parabéns pelo maravilhoso trabalho

[@riqfez5468]

if google stop adding those windows at the end of the video it'll be fantastic or at least gives us the option to remove it .

[@donaldwycoff4154]

I always wondered how this kind of a fix could be done. Now I know. Thank you !

[@alanwilkinson9487]

Looks good but....how safe is it really!.travelling at speed with heavy loads

[@russkiipatriot6773]

Техника на грани фантастики