How to Retreading an old Big Tire - Amazing Process Of Retreading Old Tractor Tire |

How to Retreading an old Big Tire - Amazing Process Of Retreading Old Tractor Tire |
We make these tires for poor farmers because new tires are so expensive that poor farmers can't afford them. The tires we are making are very strong. They run like new tires. We give a one year warranty.
So watch Now This Amazing Video And Enjoy the Tire Retreading Technique.
#RetreadingOldTractorTire #RetreadingOldTractorTire
#TractorTire
#Tire

[@gtcazusa]

How he went around both sides of that tire at the beginning with a hand knife, and didn't puncture the inner layer - is simply amazing skill.

[@annoyingbstard9407]

It’s because it’s one they’ve obviously repaired before and the tread’s barely attached. You can see it’s semi-bonded for half an inch around the edge at the most. 😂

[@rsz90182]

@@annoyingbstard9407 You have answers to everything, don't you? No proof or any experience but know everything on KZbin. You should make a career out of your super skills. Pffffffffffff.

[@annoyingbstard9407]

@@rsz90182 Quiet Mohammed. Respect your betters or go back home.

[@janakrcmarova6586]

@@annoyingbstard9407 exactly :D.

[@erolaltiok9954]

AaaqaqaaqqaqaaaaqaaaqaqqaqaaaaaaaaaqaaaaqqaqqqqaqaaaaqqaqaaqaaqaqqqqqaaqqaaqqqqaqaqaaqqqqaqqaqaaqaaqqqaaqqqqqqaqaqaaqqaaaaqqqaaaqqaqqaqqqQqaqqq1❤11❤❤❤​@@janakrcmarova6586

[@randallwalker2285]

Much respect to these young guys .....that's some hard ass work !!

[@User0000000000000004]

Definitely ass work, you got that right.

[@user-hj1ng6kr7o]

Пакистанский филиал завода мишлен)))

[@robertsalanon2909]

Jamais , je n·aurai cru ??? Vraiment , chapeau á cette reconstruction , des artistes ...Congratulations ...

[@michaelriley2279]

All I can say is, You fellas earn your money. Respect guys

[@howitworks2022]

Hard and long process Good team work

[@herrakaarme]

That was a lot of hard work.

[@katr8756]

Remarkable process!! These people are really ingenious!

[@manuelislas9270]

Mis respetos para esta gente que son muy listos

[@Smitty134]

They are surprisingly clean for the job they must do every day.

[@MohammedAslamtit-bitsoflife]

Mashaallah tabarakallah, amazing craftsmen. A poetry to watch but the job is not easy as it looks. Thank you very much brother for posting 💖💖☺️☺️🙏🌺🌹💐🕺🤸💐

[@daniel01m]

I just respect the fact that those youg men are working, and not running the streets!!

[@user-yl3mp7um6k]

They are Slave labor, nothing there to respect.

[@Buddhismhelps]

These boys are happy to have jobs and work hard. The tire appears to be for a tractor and while it is far from “new”, it will probably do the job for very little money. People in the third world from my experience make do with what they can cobble together and manage to get by. It’s difficult for us to grasp this without actually being there.

[@rubensolislopez1930]

Un saludo a estos hombres chingones para lo que hacen

[@100Aurangzeb]

Salute to these guys ! Amazing job .

[@charlesmahoney790]

I think some of the young men should get a nice amount from this video

[@kveldgorkon4611]

Great Job !!

[@Moto_Brrro]

И вывеска над входом ... Шины от производителя)

[@howiej4084]

And i suddenly find myself glad I live in a developed country. Hats off to these guys.

[@jimmyjamescomputers8585]

what is developed about ur country

[@aarongingrich3831]

enjoy it while it lasts

[@ShitThatsMyn]

@@jimmyjamescomputers8585 infrastructure, economy, safe workpla... why do you care? Nobody ain't gonna explain situation of their country to some Jimmy james computers guy in youtube comment section 😂

[@robertredmon5409]

Was thinking the same thing seeing this just goes to show how good life is and how fortunate those of us in the developed world are. I'm an American and most of those in my country are under the misguided idea that the rest of the world lives like we do. They have no idea how hard life is for the average person in many countries.

[@justglenn3139]

@@jimmyjamescomputers8585 Safety standards.... thats what's developed. If you need to ask, you're not very observant.

[@rizkyabadi8205]

Awesome. These people are magicians.

[@roninstrumen]

Wah....... proses modifikasi ban mobil yang sangat menarik, bermanfaat dan terinspirasi.tetap semangat berkarya semoga sukses selalu 👍💪🙏

[@lazyboy7053]

the blue shirt guy is clearly new in the field, and it is just really good to see that the experienced person is teaching him the ropes. you see the initiative when he see the new guy struggling on something he not direct him and yell but shows him how to do it. wish most industries does dis. I mean older people do this cuz they have respect and act mature.

[@ferrumignis]

That poor guys lungs must be 90% rubber dust 😕

[@slipf18bustedflush42]

Teaching him the “ropes” ?????! You mean adjusting him to life in a dangerous sweatshop as an economic slave?

[@User0000000000000004]

@@slipf18bustedflush42 Performing a task that doesn't apply to any job anywhere else in the world where this would be 100% illegal.

[@clifficus]

Oh my word, that old guy has amazing skill to be able to take that whole tread off in one perfect go and leave it perfectly smooth. Brilliant 👏👏

[@MACHINERYTECHNOLOGY]

woww, these craftsmen have amazing skills. Can you tell me which country they are in?

[@yeetman4953]

@@MACHINERYTECHNOLOGY somewhere in india or pakistan

[@EgonBukavec]

​@@yeetman4953 AA a😅

[@markrainford1219]

@@MACHINERYTECHNOLOGY Leicester.

[@user-kz9vz2jn5r]

​@@MACHINERYTECHNOLOGYq

[@helloworld12]

Very scientifically made state of the art tires.

[@qzorn4440]

This is all about hard work and skill. Thank you. Be safe.

[@user-dc6it3dw2h]

Молодцы ребята!👍👍👍👍

[@maximablov1006]

На такой работе можно забыть о проблемах в спине....

[@majorbrighton]

Total respect. It is so nice to feel humbled by people who lucky for us, do their jobs with pride. Here in the West we stand to loose any and all traces of that past. Technology is the worst, it does not change with our need for it, we always loose so many skilled due to automation and jet we have no real understanding of it. I hope for a time when we can turn back to shopping at a market with our family in hand and stop to chat with likeminded people. Were we as young children, stand in ore of the skills of old men. Am I alone with these wishes? I too lost my airbrushing skills that took 4 years to hone, to Photoshop and similar apps. I watched as Typesetters also lost their ability to work more. Some call it progress, yet for some it´s a society that won´t bend.

[@RickaramaTrama-lc1ys]

U have people like me (78 yrs.) that agree with you completely~!!!

[@user-ww8er5hu7t]

Как любят говорить некоторые мастера "лучше новой. Будете меня вспоминать и благодарит". Вспоминать точно будут. Благодарить......

[@kimtran4467]

Very good

[@diverpoa]

This is a tough job,👍🏻

[@charaenpraporncharaenphol7757]

Thank you very much

[@screwsnutsandbolts]

Interesting process ! 👍

[@rodrickdavidson6815]

Bloody marvellous excellent job, you guys really worked very hard. I give you guys 10 stars. 👍🇦🇺⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️

[@nguyenbui6828]

ç

[@Znr_fishing]

I give you one star ⭐ because your a rich 🐀

[@thomascaulfield9277]

we need more of this in the world instead of throw away and buy new ,top marks lads

[@thepoopsoup]

@@thomascaulfield9277 easy fix open a recycling plant

[@ricksclick]

Wow! That is hard work! Very good technicians and workers.

[@seanmares2406]

You guys are good at what you do

[@paosaelee7846]

Wow they work so well and fast together ...great job

[@boon725154]

самое главное не показал - откуда протектор взялся? ну и конечно то что он веничком обмел и не обезжирили- это пестец конечно, интересно как скоро отслаиваться начнет? стоит пустым хоть раз чутка проехать и кранты колесу

[@royvonalmen5044]

Definitely pre Bandag..!! I use to work in a re tread shop in the mid 90s, hot as hell with those chambers. I think we started at 4:30 am, to beat the afternoon heat. Very dirty work, Canton, Oh.

[@mmi16]

When Ralph Nader wrote 'Unsafe at any speed' , he had not seen this operation.

[@gullreefclub]

@@mmi16 This isn’t a Corvair tire so what’s the problem

[@werschkowdennis6533]

За сьёмку я надеюсь автор с ними рассчитался? Больше миллиона просмотров. Давай делись с ними.

[@rickmcdonald1557]

Another example of what some people can do without much help from modern technology and no safety equipment. They refurbish what we would call Junk and make the item live to see another round of important work to keep the circle of life going round and round. I salute these guys for being such fine craftsmen~!!! 👍💪🙏

[@AveragePicker]

No help from modern technology? LOL Are you blind? There is "modern technology" every step of the way through the process.

[@primovalenciado139]

v

[@User0000000000000004]

"no safety equipment" you got that one on the nose, brother! I've seen these videos where they're casting things in a hole in the ground or using a broken crankshaft as a ram instead of a hydraulic press. But worst of all is how many metal shops use angle grinders without guards on them. One of those comes apart and the plastic eyewear won't help you.

[@dennisdavis6868]

Wish I had hard-working guys like this, make work in my body shop look easy hard to find guys that wants to do it in the US. Hats off guys for making it happen!!!.

[@rickspearman344]

These are not the guys stealing American jobs, These guys help out the farmers around their community, who without them, would have to buy new tires ( which they can't afford) I doubt these guys are getting rich by any means.

[@davidledford3522]

I work hard how much you pay

[@MrConquistador76]

Quieres pagar poco. Tacaño.

[@davidgarcia6095]

If by any chance you bring one of this guys to your shop,in 6 month he will change completely,and become as lazy as any other here.

[@casamm284]

@nailman30635 q

[@mikepapillo5728]

VERY GOOD BEST JOB I EVER SEEN THANK YOU

[@user-ve2vs3kd6g]

صراع من أجل البقاء بارك الله بيكم وجزاكم الله خير الجزاء والعمل الصالح

[@chriskyle5018]

Качество лучше чем у Ярославсий Шинник

[@user-km4om5iy3p]

Да тут даже нокиан хаккапилита 100500 отдыхает

[@evgen2172]

Не надо на Ярославль гнать

[@user-wk6yv5vt6k]

Лучшие чем Алтайшина. Не шучу

[@jimydoolittle3129]

Those guys are awesome 👏 they fix everything 💪👏

[@misplacedcajun2325]

That was a lot of work and three men put time into it. In the U.S., a standard farm tractor rear retread runs from about 70-120 bucks. As stated, that takes time and manpower with materials. Too bad they probably don't make much money on it. These are good hard-working guys and I wish them all the best.

[@scarface50284]

Dude is a sergeon with that blade, not to mention that is one sharp blade.

[@dr.ibrahimhassan8501]

رووووووووعة لا حول و لا قوة إلا بالله و الله رائع اللهم صل و سلم على نبينا وحبيبنا وشفيعنا وقائدنا وقدوتنا محمد صلى الله عليه وسلم تسليما كثيرا وسبحان الله وبحمده سبحان الله العظيم.💘🍃💝🌾💚🌺❤🌻💙🏵💞🌱🧡🍀💓💐🌼🌷💙🌿💕

[@nabilodz6113]

Amin

[@DirtForester]

No

[@qamarpapa485]

الله أكبر والله فريد

[@avap2677]

Nice , recycle ! I do it with old wood . I love it .

[@pvanwienen]

you guys are animals ! Awesome !

[@hasenfussmeerschweinchen86]

Sehr gute Arbeit. Macht weiter so. Das spart Resorsen. Grüsse aus Berlin Deutschland.

[@louispaxeco6931]

These guys are wonderful! Besides all, environmentally correct... congrats to all of them !

[@t.s.9656]

you wouldn't use a retread like this on your car in a million years and you know it. So get off your environmental high horse.

[@louispaxeco6931]

@@t.s.9656 What is the problem? These tires are intended to be used mainly on agricultural tractors, at such low speeds... they perfectly adapt to the needs of this country, whose population honestly struggles to earn a decent living...

[@CaptHollister]

Environmentally correct ? Did you notice all the garbage strewn about ? There is nothing wonderful or environmentally correct about what they do.

[@louispaxeco6931]

@@CaptHollister Is is t better the whole or a part to be discarded? Besides it, the core of the tire doesn't need neither raw material neither energy to be build.

[@CaptHollister]

@@louispaxeco6931 Contrary to what you seem to believe, retreading implement and truck tires is widely practiced in all developed nations. The difference is that in developed nations it is done in clean, environmentally controlled factories that are safe for their workers. When it comes to ecology and the environment Pakistan looks the other way. There is a reason why it is one of the worst polluters per capita in the world. As for worker safety, this video speaks for itself.

[@user-bm1rp3xf6v]

Санкции ребят, мишлен пирелли нервно курят , победа и опыт !

[@armandohercules6598]

Great job guys

[@Greg____H]

These guys amaze me with their skills.

[@elisioeudes6288]

Sensacional guerreiros! 👍👏👏👏👏

[@johnbaldock6353]

I suppose this is like Britain in the 20,30,40's. Make do and mend.Big respect to the hard workers for let's face it a poor wage.🇬🇧❤

[@User0000000000000004]

No. This never happens in any developed country, ever. This is ONLY because it's India or Bangladesh or Pakistan or Afghanistan where human life is worthless.

[@speedybuggy1677]

Very hard work to do what you do to the tire very while great work I give you five stars ⭐⭐⭐⭐⭐

[@RickaramaTrama-lc1ys]

They are incredibly talented and do all this work with handmade tools and sheer muscle, but I fear them losing an eye or getting injured by not having any safety equipment and like some other comment said I'm so fortunate to be where I am~!! 🙏🙏🙏🙏

[@patrickfinnegan554]

10 out 10 for teamwork i ha ve never seen anything like this before . I hope they get well paid for finished product .they work so hard and no protective gear. Well done to them.

[@dockingtroll6801]

they will probably get paid around 20cents an hour...

[@barryphillips7327]

I would guess they are poorly paid, think it is in Pakistan or India?? Paid peanuts 😞😞

[@rnish2958]

Paid? I bet that's a family business. You work and get to eat.

[@rnish2958]

@notfiveo Replay is at faster speed than recorded.

[@sheemengnyon8217]

.

[@krarefyev]

Центр колеса: - "Ну да, ну да. Пошел я нахрен."

[@alxvlx9020]

О чем это ты? Каких "умных" книг начитался? Это тебе че, шина для драг заезда? 😂 Дай бог, если она (шина) за минуту оборотов 100 делает. Ты еще про балансировку бы спросил 🤣

[@SuperOlds88]

A nice air-condititioned shop to work in too.

[@hudentdw2]

my respects young men that job doesn't look easy.

[@user-gw6cf5fb3h]

Работа , конечно , грандиозная ! Браво ! Но в чем смысл порезать две шины , чтобы слепить из них одну ?!

[@user-jg7lw9zt9k]

наверное из 2х шин "на выброс" сделать одну продажную

[@gjgjd5920]

Первая была лысая, у второй скорее всего было боковое повреждение, в результате которого дальнейшая эксплуатация не возможна.

[@Shkvarka]

когда ты под санкциями... это лучшая шина в мире одна из двух=) рашка уже учится жить по этим видео=))

[@flashgarage]

​@@Shkvarkaв голове у тебя вавка, пойди полечи😂 свет что ли ещё есть? Так скоро отключат

[@Shkvarka]

@@flashgarage правда глаза режет?;) режет...)) ведь весь мир вам завидует)))))

[@slam5127]

👏👏 Таким мастерам всегда уважение за их талант

[@craigstreetzel7743]

Excellent job with your 🔪 experience working with your buddies and everyone in their own positions in the process cool 😎 safety glasses 👓 but I'm sure they will for some stuff

[@JonYuill]

Fantastic. And right next to the chipmunk enclosure too.

[@Sl20]

The funny thing is they don’t know how much we admire them,I hope someone recognize their work and give sort of like tickets to Disney or something or taken to nice restaurant as a appreciation!!!!!!! Amazing

[@davechapman7735]

very hard and skilled workers, thanks for sharing this.

[@user-us7nl5zw1p]

Изделие №2 ! Ручная работа, штучная. В свое время, у нас тоже ,практиковалась наварная резина . Экономика должна быть экономной - Грета Тунберг .

[@jojoestranger4989]

its some sort of miracle this process work

[@jdquasetudo8271]

Ótimo trabalho parabéns 👋🇧🇷

[@armandohercules6598]

LOVED IT ♥

[@user-is8uc5gh8r]

Откуда взялись пупырышки новейшего протектора?

[@cooldog60]

These guys are real men.

[@tv-lo1kh]

와 감동입니다 화이팅.

[@werschkowdennis6533]

И всё это без каких либо масок. Получают тоже почти ничего. Бедные люди. Долго в такой мастерской не протянешь.

[@RRED2]

Well done 👍 you worked so hard 😊

[@garylp3]

Strong set of lungs on these guys. Heavy breathing all that fume why exerting so much energy.

[@rustammanggala1411]

Salam dari Indonesia 👍

[@johnoceanyang5522]

I love you guys that’s damn very hard work

[@dwaynedonnelly]

I have never seen a tire retreaded like this before, impressive.

[@dennislewis7602]

It look dangerous 🤔😳😂

[@greggincorporated]

@@dennislewis7602 thats because it is, it will ruin your tire more than help. just buy new ones

[@markrainford1219]

@@greggincorporated You've probably already bought three quarters of a new tyre.

[@greggincorporated]

@@markrainford1219 on street tires? no.

[@nogayvulf]

Как долго эта шина отработает?У меня есть сомнения о долговечности после такого ремонта.

[@kidvinie6491]

Seamless!! Now lets see you fit it onto the moped!

[@genehunsinger3981]

better yet,roll it down the street and try + dodge all that Indian traffic.(Karl Rock)

[@firmanrikofficial9600]

Smart❌ Smart,good job,hardworker✔️

[@ezequielsilva2709]

Incrível, não conhecia esse processo 👏

[@emmanueltiongzon2803]

Ingenius at its best

[@NellyPerezvillegas]

​@@emmanueltiongzon2803d

[@architude]

And that ladies and gentlemen, is why you need to get your tires balanced when fitting them.

[@angelooldman7201]

GENIOUS PURE GENIOUS

[@franciscofallasfrafamodels6192]

Thank for video excelent

[@wonderingskills1]

Good work bro

[@viggo48sam]

Et stort arbejde super dygtige dækmænd 🏁🏁🏁🏁🏁❤️❤️❤️❤️🇩🇰

[@amy-joe5772]

Great Job guys good for a few more miles

[@zubairsheikh6067]

whoa didn't knew they could be recycled this way to. the guy in the beginning is master of his skill. just one blade and he did what a high tech machine would struggle on

[@User0000000000000004]

You think that because you have no idea what's happening here.

[@user-ic6bj7ix7e]

В начале видео , специалист лихо снял протектор , интересно возможно ли самому повторить .....

[@artma89]

Лет через 10 думаю, после нескольких сотен таких махинаций, сможешь также )))

[@user-ic6bj7ix7e]

@@artma89 Шины низкого давления однако получаются...)))

[@koreanature]

Wow, My best friend, Thank you for your hard work in making the video. I enjoyed the good video. Have a happy day.

[@genehunsinger3981]

you will make boo-koo social points if you duplicate this in your town!!!

[@empoyvid4866]

Wow good job 👍👍👍👍

[@slavytichfermer3092]

Самое экологически чистое производство для легочного аппарата рабочих☝️

[@jayburrough4308]

I bet that little dude is strong AF and I think this is the first video I have seen from over there where they have concrete in the building...I really don't know how I feel about retreading this way because if you need it you need it and it's probably cheaper and I'm sure they are having problems getting stuff to

[@coloradostrong]

Getting stuff "to" where? "...they are having problems getting stuff _too_

[@user-yj5zi9ho2r]

Г5

[@luizcarloscavassana9301]

Parabéns pelo seu trabalho 👏👏

[@neniys1142]

Beautiful god 👍

[@leomoura534]

Belíssimo trabalho,parabéns👏🏽👍🏼muito bom!!

[@sheemengnyon8217]

.

[@imortaisloko]

valeu meu amigo tmj 👍

[@gilmariano100]

Tudo muito arcaico,anos luz da tecnologia,trabalhadores expostos a intenso esforço físicosem qualquer equipamento de segurança

[@BrassLock]

You haven't travelled much in South Asia, have you !

[@charlievillegas1998]

Ll