Over 10 years later, still a good Video!!!! Thank you very much!
@cadcaetutorial20392 жыл бұрын
this lecture is very nice sir👍👍👍👍
@cadcaetutorial20392 жыл бұрын
next lecture is comming soon sir
@hteenup4 жыл бұрын
This video has helped me a lot, Thank you very much.
@davidhoey73088 жыл бұрын
This has helped me immensely. Thank you very much!
@rohitsingh6703 жыл бұрын
Sir ap jo remove cmd use kiya Tool bar ka naam kaya he
@mtmCAD13 жыл бұрын
yes you can apply constraints to a body, but they will not show up in the tree. Only graphically. In assembly mode the do show up in the tree under the constraints folder
@nguyenminhvo8820 Жыл бұрын
Can catia do the opposite? I am having a 3D drawing of a plastic injection mold. I want to redraw the "Runner" of the mold from the 3D drawing, is it possible?. Thank you
@mtmCAD Жыл бұрын
I would recommend sketching on the surface and projecting the geometry to recreate the runner.
@nguyenminhvo8820 Жыл бұрын
@@mtmCAD I'm glad you responded, do you have any similar videos you can send me, thanks
@mtmCAD Жыл бұрын
@@nguyenminhvo8820 unfortunately no, I don’t have access to CATIA anymore. I do training and one-on-one consulting using Fiverr with Inventor and AutoCAD.
@nguyenminhvo8820 Жыл бұрын
@@mtmCAD thank you
@muhdfaris16422 жыл бұрын
What toolbar that you use to remove the part from mould
@mtmCAD2 жыл бұрын
It’s the Boolean operations toolbar
@davidgruty13 жыл бұрын
Can you give constraints in a body level? where are they in the tree??
@akkbab76784 жыл бұрын
Sir i m getting It is not allowed to paste
@RajivBelkude8 ай бұрын
Please provide voice to your video. Your video are best but without voice not understanding some command and operations
@mtmCAD8 ай бұрын
Hey sorry I think I was surrounded by noise when I recorded this video.
@khouryjohn79239 жыл бұрын
Where are the dimensions for the shaft that you used to make its outline into the mold? Is there a drawing? Thank you?
@mtmCAD9 жыл бұрын
You don't need dimensions in this case. It just a sample to demo the functionality. Just make the box bigger than your shaft.
@prasannajeetmadnaik68396 жыл бұрын
Is there any setting paste special, its not working, it is says that paste special is not allowed
@mtmCAD6 жыл бұрын
Prasannajeet Madnaik Can u send me a PM with a sample file and I can take a look at it and tell me yr exact steps?
@shyaafirahim570310 жыл бұрын
nice work dude .
@adyk66043 жыл бұрын
When I insert body2 my main part body disappears. Please help.
@mtmCAD3 жыл бұрын
In your tools > options. There’s a setting that says to only show active body. That’s why it’s disappearing
@spam7073 Жыл бұрын
I can't find remove
@mtmCAD Жыл бұрын
You need to be the right workbench
@ANIKETSONAWANE9 жыл бұрын
i want make casting for a wheel is it possible with this technique ?
@mtmCAD9 жыл бұрын
That will be more complicatedl. You will need to do it in the molding workbench. There are different types to choose from.
@poovarasanpavarsing967 жыл бұрын
thank u so much buddy!!! its awesome!!!
@atinhTien-ninjabatcan7 жыл бұрын
thank you! It's awesome!
@Mania201612 жыл бұрын
nice work very simple thanks
@kelgandrekiran6 жыл бұрын
Also visit and sign up to www.campuscad.com for daily Mechanical Newsletter.
@engkimoo10 жыл бұрын
why the scale 1.03 can you describe it please :)
@mtmCAD10 жыл бұрын
That's generally the scale factor used in industry when it comes to plastic injection molding
@engkimoo10 жыл бұрын
thanks :)
@kerembyl9 жыл бұрын
Eng. karim Tarek it's because shrinkage. when a hot molten plastic material is cooling down, final volume is always going to be less than initial volume.
@kevindsilva13446 жыл бұрын
what about aluminium/iron casting? can you put a link to an article that gives adjustment factors for different process?
@saifulhaqi65245 жыл бұрын
what toolbar is that at kzbin.info/www/bejne/bmqUYWOql7KblaM
@richardplazo38874 жыл бұрын
Can i collaborate in your channel?
@mtmCAD4 жыл бұрын
Send me a PM to discuss
@richardplazo38874 жыл бұрын
@@mtmCAD There is no email in your channel. My apology, I'm just new on the channel.