CB500X Rear Rack - part 1.

[@francoismoreira1583]

Bonjour,merci beaucoup.j ai le sw mais,je voulais installer celui-ci car il est plus discret et grâce à vous,j ai économisé 100e.👍💪🏻🙏🇫🇷.je conserve mon sw.Thank you very much

[@pixelpastime]

Thanks for this review. Very useful, informative and down to earth content! Cheers!

[@twofeetonthepegs]

Thnx!

[@javierdumont8400]

Gracias por tu buen trabajo, me a sido muy útil montaré herrajes givi en cbx

[@wayneh8767]

Good review info, i was undecided because when you use the SW Motech you have to delete the handles, but it looks great and is strong. Checking out part 2!

[@twofeetonthepegs]

During autumn I expect to come out with part 3 :-)

[@drdoolittle5724]

Give You 10/10 for that video, perfection!

[@twofeetonthepegs]

Thnx!

[@nohighway7482]

Thanks a lot man, you just saved me 100€ 😄🍺. Got the same bike (and color) this july, wanted to buy this carrier for next season, but thanks to you I think I just dodged the bullet ... . Great review btw, keep up the good work.

[@twofeetonthepegs]

If you haven't did yet, check out part 2 :-)

[@edukze]

I just returned mine even before installing it. it had a free return policy. Thanks. Will get the SW instead.

[@twofeetonthepegs]

The SW one is definetly a good choise !

[@J2Wlz]

Thanks! Very helpful!

[@TNgawang]

Ur vedio really help thanks you so much

[@hosseinhaghparast5670]

Thanks for share I was going to buy almost the same one from amazon for 100€

[@mpa568]

Thx for sharing!

[@twofeetonthepegs]

I got a lot from the MC community on KZbin, so I am happy to give back !

[@profejavierieselpalo]

Wow man thanks a LOT!

[@twofeetonthepegs]

Not, at all. I am still testing the steel version of AliExpress brackets, may be by autumn will have some relevant experience about it.

[@wiktor88]

Hahaha I just received my shipment from China with similar mount. I'm going to see how long my piece lasts anyway, the only plus is that it cost me $46 with coupons. It is also strange that my mount has minimal other holes and an extra plate

[@twofeetonthepegs]

Your rack brackets are made of aluminum or steel?

[@wiktor88]

@@twofeetonthepegs there are four parts. The main plate is aluminium, the additional smaller plate and both mountings are steel.

[@wiktor88]

@@twofeetonthepegs ok, I've finished the assembly. I didn't get any instructions from the seller there were no silver spacers, and there was this extra smaller plate which isn't on the SRC channel which is why I came across your video, looking for instructions.

[@twofeetonthepegs]

You mentioned SRC channel...At this link ( drive.google.com/file/d/15bOn6k515iNRCbBSva9i9aoDyxCdVwDv/view?usp=share_link ) you can find the mounting instructions of the SRC tail rack (that was also fully made of aluminum, but they no more sell it, was removed from their website)

[@twofeetonthepegs]

If your rack brackets are made of steel, it's gonna be more durable no doubt...I am curious how will perform on the long run

[@XplorerDinesh]

can u please share the ali express link for the top rack that you purchased

[@twofeetonthepegs]

Sure, here you are: www.aliexpress.com/item/1005003286119361.html?spm=a2g0o.order_list.order_list_main.10.21ef1802u0SRfY

[@vhonsamson6177]

can you send the link where you bought this item please,.. shout out from Dublin ireland

[@twofeetonthepegs]

AliExpress rack: www.aliexpress.com/item/1005003286119361.html?spm=a2g0o.order_list.order_list_main.9.21ef1802TvXnVQ

[@twofeetonthepegs]

SW-Motech rack: sw-motech.com/en/bike/HONDA/CB500X/2022/PC64/products/luggage/luggage+racks/STREET-RACK/4052572051191.htm

[@twofeetonthepegs]

SW-Motech extension plate: sw-motech.com/en/bike/HONDA/CB500X/2022/PC64/products/luggage/luggage+racks/STREET-RACK/4052572051481.htm

[@rickaspicka5922]

What torque wrench do you used? Thanks

[@galzoli]

The big one (for higher torques) is "Pittsburgh Pro", the small one is "DLC Shop Tool"

[@hosseinhaghparast5670]

Do you have any suggestion?

[@twofeetonthepegs]

If you are on a budget and you are happy with a maximum 8kg capacity (inculding your top box), get the chinese rack, the one made of STEEL . If you are not on budget/need bigger capacity go with the SW-Motech. The SW-Motech is my preferred rack , you will see soon in a new video why 😉

[@somersetlevellersmtb5564]

Could you post link for this rack

[@twofeetonthepegs]

www.aliexpress.com/item/1005003286119361.html?spm=a2g0o.order_list.order_list_main.339.21ef1802FgZROb

[@flyertx21]

Could you provide the name of the seller so I can request the steel brackets you mention in Part 2

[@twofeetonthepegs]

You can see it in part one, at 06:21, the name of the shop XRacingMoto. But if I were in your shoes, I would not rush with that purchase. I asked them what is the capacity of the steel bracket and they answered me "16 kg". No way. For the aluminum one they rated 8 kg, and already know from experience that is not true...so I have good reasons to doubt that 16 kg....The steel one will be definetly more durable compared to the aluminum one, but what can it withstand, still is a big question to me...

[@hegyeliandras7518]

Szia, ha még megvan érdekelne az aliexpress-es rack ha eladnád. Nekem is CB500X-em van és mos keresek ilyent. Köszönöm Van még ez a kanadai, ami igen jónak tűnik, de elég drága, amire ideér, sztem: kzbin.info/www/bejne/n4aWoYGolNaLircsi=8CmlFxcrHzVd0ri6

[@twofeetonthepegs]

Szervusz András! Igen, érdekes darab az a kanadai, elég masszívnak tűnik és nem kell levenni a kapaszkodót. Ugyanakkor eléggé fura ahogy kinéz (számomra), olyan mintha egy kályharács vagy lábtörlő lenne :-))). Ja, és nem látom hogy milyen rögzítési pontok vannnak egy doboz részére....Ami az "ali-s" rack-et illeti, igen megvan, ha érdekel 25e-ért a tied lehet ha már feketepéntek van/volt :-)

[@TNgawang]

Made in china I will never buy

[@twofeetonthepegs]

:-) ...The aluminum racks I got in the video are bad, not tested products ...and yes, unfortunatelly there are a lot of rubbish Chinese products....but let's admit not all products made in China are bad ;-)