CBR1000rr Wrecked Bike Rebuild

I purchased a Wrecked 2007 Honda CBR1000rr and rebuilt it back to stock. It did not require too much major work, i replaced headlights, upper fairing stay, clutch reservoir cap, fairings, and had to sand and paint the rear rim and both motor cases.
Instagram- / benjamminoutdoors
Facebook- benjamminout...
Patreon- www.patreon.com/user?u=30054268
email- [e-mail]
Filmed with iPhone 7 Plus

[@dylanwilde1103]

I respect this man for one thing and one thing only he did the whole rebuild in one vid where other KZbinrs would drag it on for like part 1 part 2 part3 etc

[@jomcpetv1013]

Dylan Wilde it’s because this isn’t a fucking rebuild. He just repaired a few minor things that anyone can easily do. But other youtubers have to take apart most of the car and replace and rebuild everything. The only thing this guy “rebuild” was the speed gauge housing

[@XenderWindX]

@@jomcpetv1013 fuck off with ur negativity

[@cordellej]

dude you are so correct with what youve said. just ignore that one fool . ive visited his page i haven't seen any motorbike rebuilds or any videos on his page he is just a big mouth armchair general

[@od9439]

JoMcpeTv you wasn’t even being negative tho just stating facts 🤣🤣🤦‍♂️

[@greenjoe4202]

its hard work either way and its the vloggers that are annoying, "we are doing this non-related thing first" video.

[@mikeopenshaw9128]

Great "no nonsense" approach - and a great result - nice job!

[@mavricxx]

Wow, loved the music and showing how you did it! You make it look so easy. Keep the great videos coming brother!

[@calinopi3223]

Nice rebuild! Cosmetically sound. I recommend you check front end for alignment. Take tension off lower triple clamp pinch bolts and axle nut and plunge the front end for self realignment.

[@Benjamminoutdoors]

Calin Opi thanks for the tip I’ll keep that in mind next time.

[@damir9743]

Not

[@daevster6663]

Hey man I just felt the need to congratulate you on a job well done and making this blade nice and sharp again. 👌

[@Cristian8767]

Poor guy, i feel for him! Hope he get's 100% well! All the best!

[@metalhead4404]

Used to own this exact bike. They are so sweet and were so fast for their time. Loved the body styling, headlights, and undertail exhaust over the new bikes as well. Great build!

[@spreepirat4805]

Great video and good job buddy 👌🏼👍🏼💪🏼

[@Benjamminoutdoors]

Spree Pirat thanks man!

[@bikesbabesandbangbangs3765]

Love that paint scheme. Good choice.

[@amboisland]

Your work is 100% legit especially for the wheel.

[@markguenther2173]

Nice job! Went to high school with your Mom. She recommended I check out your channel! I have 5 bikes at home.

[@magnusoj3014]

I liked the Redbull look more than the white Repsol.

[@ulasmsgl4752]

BlueMatterZ ツ same

[@audreandre]

Orange repsol for me

[@badbwoy8768]

DEFINITELY!!!

[@luckgrip252]

I'd prefer Redbull look for some reasons, but i love this bright and refreshing look too. So, either way i can't judge the look just because the bike looks super awesome!

[@cyberhawk80]

the tarmac loved it too..

[@Pikachuuuuuuuuuuuuuuuu]

Great job. Love from kohima, nagaland India🇮🇳

[@Ahmadandwoods]

You did great!!! I crashed my Honda cbr 600 rr most of my ribs are broken but I'm grateful to walk away with that from could have been 💯 I'm going to work on mine and this video helped because it was similar damage. Thanks again!

[@Benjamminoutdoors]

AMO RELOADED sure man! Sorry to hear about that tho.

[@DeansFFA]

Loved this video, music was so good! Really enjoyable to watch. Perfect pace and mix of footage and talking. Well done :)

[@claudebensoussan185]

Congrats, I am admiring this restoration work !

[@TheFireblade1000RR]

Looks gorgeous... Love my Honda's and blades

[@dwaynethomas2859]

Great video, you are a young guy with lots of talent. Keep doing what you enjoy and don’t let the negative jealous people ever get you down 👍🏻

[@Benjamminoutdoors]

Dwayne Thomas thanks bro!

[@captaina4458]

I don’t see negative comments here. I see a lot of concerned people viewing his repair work. Whether he’s keeping the bike or selling it, the first and foremost biggest question should always be “Is it safe to ride?” Especially after a crash. Check the alignment, check the suspension to see if the forks are suitable for riding or if that too needs to be repaired, check the engine, plugs, drive, etc...he’s young, he’s determined which is great but he should definitely be looking into all the small pieces and not just the cosmetics.

[@keveshannaidoo5670]

@@captaina4458 hater

[@captaina4458]

keveshan naidoo more like an experienced rider and mechanic to know the difference between a quick fix vs a legit rebuild. Trust kiddo I’ve been through the loops to know what’s the better choices to make on crashing bikes, rebuilding bikes and selling safe bikes. So before you go off popping your mouth calling someone a “hater” you should take into consideration what the message is. 😎

[@keveshannaidoo5670]

@@captaina4458 he probably checked the forks already I mean who wont check that that's the first thing to check on a crashed motorcycle

[@timothyvaher2421]

Great rebuild repair. And damn near 2 Million views! Learned enough on a few videos now to do one myself. Thanks great inspiration! Cant wait in Seattle.

[@UberLyftNick]

Great job on the rebuild!! Looks amazing!!

[@sixthguardian6914]

a dream bike that i can only ride in my dreams. you are lucky to have that bike.

[@marianataliaacunavivas1646]

Que cosa más hermosa 😍😍 ya quisiera yo tener la suficiente plata para poder hacer lo mismo. Saludos

[@retardbuster1498]

Thank you for giving the bike a new better life

[@iainyoung2677]

I could watch these over and over awesome bud. Usual big shouts from Scotland

[@maler95]

Great video, but that loud 4 chord music is driving me nuts.

[@jane5255]

same bro

[@Benjamminoutdoors]

Dennis Holm LoL sorry

[@DynamicJatt]

i was already listening to good music.. the video was muted by default :P .. got to know that the music was bad from your comment only xd

[@KuswordChannel]

Enjoyed the music a lot.

[@callmedaddy6988]

Same but its better than without music.

[@callmedaddy6988]

I was expecting a motor tear down. But its still a great vid man keep up the good work!

[@margaretbirnie6313]

What a transformation 😱 stunning work👍🏻

[@willpahl1453]

Good build. Nice end results too.

[@carlosgooglemaps94]

Glad you didn’t “build” another “street fighter” like most wrecked sport bikes end up, nice fix, cheers!!

[@Benjamminoutdoors]

Carlos Google Maps lol thanks, I like my variety! My custom r6 was a fun build too

[@enormp5522]

Looks good but I would have pulled the tire off the rim to clean it up.

[@williamgates2466]

Wow amazing. Beautiful nice job. Love everything about the video too

[@alexkosta2535]

Superb work ! ,And the colors are even Better , Enjoy the ride you've got e awesome Bike !!!

[@Arun-hh1yc]

മച്ചാനെ പൊളിച്ചു 😍 Love from Kerala

[@Abhishek___25]

Pinnallah....... ❤️

[@edmgalaxy9073]

this dude makes me believe in humanity.

[@alexandrosmarios3599]

The feelings this guy will get riding his bike again is gonna be something else...

[@SnakePlizkin]

I just love the sc57, for me it is one of the best looking bikes ever.

[@ianrioangga1548]

Omg ilike your bike men,so Beutifull😍

[@alituran2825]

I like it :) Good job dude.

[@WhiteZ1K]

God job man! The bike looks amazing with the new fairings! :D

[@leosmith8]

Excellent work !!! Very good video and music, greetings from Argentina

[@JizzyTv]

i enjoy watching the video as it's my bike

[@Spirittism]

Hey bro, hope you get better soon.

[@elismigel707]

it's not your bike.

[@LiquidSnakeSSJ4]

@@elismigel707 It's definitely not his bike, or the same model as his. He doesn't even own this bike lol what a prick.

[@LiquidSnakeSSJ4]

To make it worse, all of his videos are stolen

[@JizzyTv]

@@LiquidSnakeSSJ4 Yeah Yeah Yeah Keep bothering me, Knowing that I did not talk to you, you idiot

[@aaronterantino9538]

Song - Walking On A Dream (Razz X Zack Martino Remix)

[@netherworldsecrets]

thx m8! (}{:D}

[@salahbrahimi6774]

it turned out way better than the original beautiful rebuild

[@donaboutit6568]

I love everything he does and anything he is doing should be something we need to take in practice don't hate on his work appreciate everything he is showing us thank you so much brother thank you for the information and visual detail you do to bikes

[@mgerfger5703]

Song: Empire Of The Sun - Walking On A Dream You're welcome.

[@johngitungo899]

thanks

[@gabrielmalc168]

Nice

[@Kamil-vv1ip]

But what remix is that ?

[@WAdiS21]

Razz x Zack remix

[@tomislavs1698]

thanks dude

[@thekingsservant1104]

Now see...this is the kind of video we need to see more of. Yeah people are fixing cars trucks and boats but no one is bringing back crashed bikes and copart is full of cheap bikes!

[@johnjkizer6399]

Wow, the fairing makes the difference, great job

[@RJ-gg5ck]

That's a great job Dr.Benjammin.

[@ryanm.191]

Music sounds like it’s from the same guy who made crab rave

[@muhammadrodhy9589]

song : Empire Of The Sun - Walking 0n A Dream (Razz X Zack Martino Remix)

[@JizzyTv]

ma men : thanks

[@muhammadrodhy9589]

@@JizzyTv you wlcome :D

[@easy3638]

Is that a SUPRAAA broo?😂

[@fazilsami2741]

Great job men, I really enjoy to look this video. thx 4 sharing 👍👏

[@Guzman3605]

Super nice man. Hell of job you did 👌🏾

[@PRL1290]

Great job, strong work bringing this back. What paint and clear coat did you use? Also one minor thing, you put your rear axle in backwards, the threaded end with the nut should be on the Brake side of the wheel, It looks like it shouldn't do any harm but just fyi. thanks for posting this.

[@Benjamminoutdoors]

Paul Lucas The rear axle to my knowledge it shouldn’t effect it no matter which way it goes in, i did realize that I did swap sides I’ll make sure I put it in the way it’s designated by the manufacturer next time, And I used some paint at the auto parts store believe it was duplicolor. Thanks!

[@half_blaked33]

I was about to say the same thing about the axle.

[@LonleyGuns]

More cosmetics than rebuild. It wasn't damaged very badly.

[@Benjamminoutdoors]

LonleyGuns no it wasn’t totaled but it still needed a lot of stuff

[@mathiasnkristensen]

If you watch his videos, you know its most cosmetic stuff replaces, because its often only cosmetics that gets destroyed when crashing

[@LonleyGuns]

​@@mathiasnkristensen I agree with You about destroyed covers, are the most damaged parts visually after crasch. But after every crash it is essential to measure main construction points, especially when vehicle is from aftermarket. Process of rebuild is descripted as measuring -> diagnosis -> range of repairs -> repair or regeneration -> repalce -> measuring after process (it is short version). So repalcing few covers is a part of rebuild, not full. I want You to know, that I don't say, that it was bad work in the video. It was good to see effet after such damaged parts, and vehicle looks amazing in the end.

[@Benjamminoutdoors]

Mathias NK I’m actually moving soon and I’ll have my own shop so I’ll beable to do more serious builds.

[@mathiasnkristensen]

@@dal113tek wdym idiot(s)? I support him. I didn't say anything disrespectful or anything bad.

[@mrdeathwing18]

Nicely done.your bike very lucky to have you.

[@rajatstephenraju5103]

nice work man. I see only dedication and passion. kudos!!

[@xxvojtax]

Are you using spray paint? Seriously. Wouldn't It Be a Motorbike for Sale? This is the best powder paint. It is a cheap, quality and durable solution.

[@taikoroadrunner4057]

Painting without primer? Do you use special paint?

[@rhysweston9426]

that made me cringe a little...

[@z4mputv842]

Well done

[@teamia3901]

I use the same paint as him it's an anodized kind of paint but it works better with bare metal, there is a can that's an adhesive for that kinda paint kinda like a primer but just grabs that paint better, completely clear

[@andrewschafer2544]

@@teamia3901 Bruh that project source spray paint from Lowes that costs 99 cents a can....not even heat rated paint. That shit is going to peel and look terrible almost instantly

[@teamia3901]

@@andrewschafer2544 The cans run about 6ish dollars at Rileys that are heat rated but he is putting it on without any prep work or without paint adhesive that shit is Gunna scrape hella bad rip

[@partharony007]

My day was started to watch this type of videos

[@bigbruno197]

Video bellissimo restauro THE BEST Honda complimenti 🔝🔝💪ciao italia 🔝

[@niklasschroder8273]

Great job dude, a question though.. Did you not mount the rear wheel axle in the opposite direction ? haha

[@AntiPlatitude]

He did.

[@badmonkey640]

Yup

[@charmainecarizal699]

Is that gonna affect anything?

[@ksmanikandan5670]

👍👍👍👍👍

[@fernando7844]

friend when agent loves our bike, we do everything for her

[@chieflongsock]

Came out killer man, nice work!

[@Akenaton2223]

A motocicleta ficou muito bonita, parabéns !

[@joller79]

Not that i am a hater but. Rebuild??? It just reminds me of when i was 8 years ols and sprayed m bycicle... When it looks good, it must be good?! Right?? The paint on engine might look good now, but when been running for some time it will flake of, and why not take of tyre before paint.. And what about getting the frame checked for straightnes?? I think a lot of theese i fixed my 1000 dollars porrsche and so on videos, makes me get the chills, many times people know nothing about what they do... But it looks great...most times..... But anyways, great efford in doing this honda...

[@typhoon5438]

yeah dont need the music better without so people can concentrate on what your doing

[@Fahadpirkhan]

Love from mumbai India great work hats off❤️

[@tojodari3465]

The way you work it's Awesome

[@davidstancu2963]

this video is a prime example of why you should be cautious buying honda sport bikes

[@XenderWindX]

what do u mean?

[@Xiferr]

why

[@davidstancu2963]

They can be totalled and you wouldnt know

[@Xiferr]

@@davidstancu2963 You can check the bends of the upper fairing stay and frame before you buy the bike

[@thomasaxt598]

Always change tires after Crash !!!

[@jeandregroenewald3190]

Whyy

[@thomasaxt598]

@@jeandregroenewald3190 They can be Damaged after Crash. Do not save money on tires

[@jeandregroenewald3190]

❤

[@simonstillborn4951]

Gotta check for a buckle in the rim. And remove tyre to clean the bead, after all the gravel that got in there.

[@guilhermedesouza4400]

congratulations men good work i am brazilian and really liked it

[@Cj9ification]

Wow man pure honest work. Good job. :)

[@ozkaronibala1731]

just wish you are my neighbor, i'll ask you to rebuild my zx10.

[@slammed4575]

I hear forza horizon 1 music, the nostalgia is real.

[@lewiswills2094]

slammed 🙌🏻🙌🏻🙌🏻

[@fireworks_4448]

I‘m playing Forza Horizon 3 at my break I read this 😄

[@dennisseals8852]

Excellent job bud!!! Very satisfying video

[@GarrethCollins]

hey dude. if you liked this video maybe you will like mine. i'm Busy rebuilding a 2017 BMW S1000RR feel free to check it out

[@amro.j96]

Man you are awesome wish i was skilled as you are🤘🏻 and thats an awesome bike had fun watching this!

[@mrmurphypiers1241]

Why don't you prime your metal before you spray ?

[@LonleyGuns]

Some 1K products are designated by manufacturers to use directly on metal. It is dedicated for non representative parts, but it isn't professional. For full coat isolation by epoxy primer is required.

[@motomikey1714]

id think it would heat the engine up more or faster? that would be my guess, cuz i heard that it happens..

[@motomikey1714]

@GET IT that is why i put a question mark, and that is why i said " that would be my guess" because i was unsure..

[@1970PMD]

Good to see you rebuild the bike, trying to hear what you are saying but I get blasted by that annoying music dude. Tone it down next vid. Lose viewers like that.

[@plopplop9402]

good job it looks great the blade is always my favourite give your self a pat on the back and be proud of what you done :)

[@Localpain]

so satisfying to watch thank you

[@carslave]

kick the one who added the music. that is not compassionate. because we see what you do. and without the music it was almost good

[@gariyamiraa2128]

Your new paint didn't rhyme with the existing one

[@noahjohnston2577]

man thats cool buying and fixing a mates bike when he cant ride, he will be happy knowing the bike is in good hands

[@viskyvlogs3648]

Youve got greatness written all over.......Awesome restoration work.

[@Benjamminoutdoors]

ViSKy Vlogs thanks!

[@llecki]

damn rookies. making stupid decisions on proper torque with a dewalt driver. 😟🤯🤔 good luck with that.🤞

[@Benjamminoutdoors]

Jason Bielecki it’s just the case cover lol, oohhhh no it’s the end of the world as we know it!!

[@miguelcovas3295]

Why should anyone use some kind of torque specs for an engine case?

[@Benjamminoutdoors]

Miguel Covas technically everything has a torque spec but the cases to me don’t really matter, I’ll torque to spec for what I think is important.

[@llecki]

@@miguelcovas3295 because if unequal torque is applied u can leak oil or over tighten the bolts which then turns into a stripped bolt or threads. just some insight. I have over 20 yrs experience with motorcycle mechanics. u will learn the hard way😉 good luck🤞

[@miguelcovas3295]

Jason Bielecki I’ve been on motorcycles since I’m 7 never stop riding and almost never let anyone touch my bike I’ve done every repair that you can do on a motorcycle and never had to torque a engine cover, so maybe I’m lucky, I’ve rebuild the engine of an 2012 R6 2 years ago after a bad crash and the bike is perfect no striped bolts no cracked cases no oil leaks, I’ve just changed my cam shaft bearings in my Ducati 1100 again no leaks and no issues whatsoever. So I consider myself very lucky. With the Ducati I even learn that the clutch press does not need to be torqued and yes I’ve consulted a Ducati engineer because I did not find any specifications on the repair manual. So while you can make some sense you being a mechanic for over 20 years you know that it is not really needed. Any way respect to you and keep up the good work!!!

[@mobilgin]

No so much information on rebuild ....most just tasteless noise ( same call music)

[@mohamedrilwan3791]

Great rebuild video ✌🏼♥️

[@Kindred_Co]

Nice rebuild! I liked that you removed the covers and painted them, but you can color match the oem stuff pretty well and they definitely are not glossy. Also the rear axle was installed backwards!

[@sin9104]

not a rebuild, just changing fairing and some parts.

[@FosterKittenFarm]

You put the rear axel in the wrong way around... And some other stuff your doing is just a bit sketchy. Wouldn't want to be buying that bike from you dude. Nice fixerupper if you are going to keep it, but if you're doing this for a profit than you're just half assing it... sorry mate

[@boognation]

this was so dope! good work bro!

[@vladleonard86]

Super! Looks better in white!

[@aaroneroa8610]

nice restoration you did back to that bike😍😍 i wish i could ride that kind of bike

[@sameerdivekar1812]

You are amazing... you have superb skills..woooow

[@Megasenpai]

Congratulations, man!!

[@LVCMTB]

Nice rebuild! Great video

[@pablobarrales6793]

Excellent!!....beautiful!!!.....wonderful vid!.....son.....u r the epitome of self reliance!!....wht u did was exceptionally brilliant!!...took a damaged bike and made it live again!...ur skill is invaluable!!!!!...u r a perfect example of self sustainability!!...having the knowledge and ability to do it urself... now if we could just take ur example and apply it to growing food...building our own homes...and making our own clothes!.....wish I lived close to u...u would be my mechanic ... I would just sit ...shut up and learn...carry on young man!...u r a lesson to the world!!!......1

[@TheFelepeno]

.... .. . . .. .... . . ...... ..

[@zileess9544]

You did a good job! Well done buddy!

[@celineboutillot3514]

Music sounds top !!! Great video and good job buddy !!!

[@jayholt2101]

Thats a really good job. Just goes to show what you can do with a little paint and new fairings. I am looking to get a wrecked bike myself and do this. I love wrenching but have a new bike not much to do. Again good job.