CCG Cable Terminations E1EX-LS Cable Glands For Armoured Cables - Hazardous Area Glands

  Рет қаралды 41,786

Thorne & Derrick

Thorne & Derrick

Күн бұрын

www.cablejoints...
CCG E1EX Lead Seal Ex de IIC
Zone 1 Zone 2 Zone 21 & Zone 22
CCG Cable Terminations E1EX-LS Captive Component Gland for use on armoured lead sheath cable in hazardous areas.
ATEX, IEC, Ex d IP66/68
CCG cable terminations are recognised as a major manufacturer of cable glands and junction boxes in the world, employing over 200 dedicated people. CCG place emphasis on the users input to enhance designs.
CCG products are also known for their time and wastage saving fatures. The CCG Cable terminations simplicity of their "Captive Cone" and "Built in Seals" concepts means that no matter where in the world the CCG products are being installed, the simplest of instructions will ensure that all the parts have been correctly fitted.
CCG E1EX-LS Ex de Captive Component Glands Features and Benefits
CCG E1EX-LS cable glands for use indoors, outdoors and hazardous areas
Precision manufactured from high quality brass (nickel plated) or stainless steel
Patented disconnect system allows inspection of armour clamp and inner seal after assembly
Factory fitted captive elastomeric seals for built in safety
Seals on both inner lead sheath and outer sheaths to IP66/68
Cable gland comes complete with polypropylene sealing gasket and an end cap / safety gauge for correct gland selection
CCG E1EX-LS Ex de Hazardous Area Cable Gland Zone 1 Zone 2 Zone 21 & Zone 22
CCG E1EX-LS Ex de Hazardous Area Cable Gland Technical Data
Type E1EX Lead Seal
Gland Material Brass (Nickel Plated)
Seal Material Thermoset Elastomer and Lead
Cable Type Steel Wire Armour, Lead Sheath
Armour Clamping Captive Cone and Cone Ring
Sealing Area Inner Lead Sheath and Outer Sheath
Optional Accessories Adapter, Earth Tag, Locknut, Reducer, Serrated Washer and Shroud

Пікірлер: 6
@Pankajmanix
@Pankajmanix Жыл бұрын
Very well explained.. Maintained all standards
@007floppyboy
@007floppyboy 3 жыл бұрын
I was taught that the inner pvc sheath should project 10mm further in the enclosure than the lead and the lead should project 10mm further in than the gland base.
@aminulsheikh4210
@aminulsheikh4210 4 жыл бұрын
Very good
@ManiKandan-qf6oz
@ManiKandan-qf6oz 7 жыл бұрын
super good explain
@RajeshKumar-kr6ey
@RajeshKumar-kr6ey 3 жыл бұрын
Good
Parts of a SWA Cable Gland - BW and CW - Electrical Wiring
10:16
GSH Electrical
Рет қаралды 16 М.
CCG E1EX QuickStop-Ex™ Barrier Gland
8:50
Remora Electrical Ltd
Рет қаралды 107 М.
나랑 아빠가 아이스크림 먹을 때
00:15
진영민yeongmin
Рет қаралды 14 МЛН
Dad Makes Daughter Clean Up Spilled Chips #shorts
00:16
Fabiosa Stories
Рет қаралды 7 МЛН
CMP Products - E1FW Cable Gland - Direct Make Off
5:28
CMP Products
Рет қаралды 40 М.
Hawke Cable Gland Installation Guide   ICG 653 UNIV
7:10
Cable Systems Limited
Рет қаралды 3,7 М.
CCG E1EX Captive Component Gland™
6:13
CCG Cable Terminations
Рет қаралды 156 М.
SWA Cable - Steel Wire Armoured
30:24
John Ward
Рет қаралды 511 М.
CMP Products - E1FU Cable Gland - Braid Cable - Direct Make Off
5:25
나랑 아빠가 아이스크림 먹을 때
00:15
진영민yeongmin
Рет қаралды 14 МЛН