CCI 22LR Ammo: Material Impact Test

[@frankbrowning328]

Really a GREAT test. Great tezting info available here. I just center punched a crow in the yard at 35 yards with the CCI Suppressor 45 gr HP. It dropped like a rock. I may have to try my CCI segmented 1050 out of a shorter barrel to see if I can keep it subsonic as I like to keep it qiet in the yard

[@Tofazfou]

EXCELLENT Video! Really enjoy that. Beautiful property also............

[@AmisCorolla]

Thank you sir! i have "short" 8" barrel and that subsonic segmented hollow point would be perfect for me! This was also only channel where i found good test compared those ammo.

[@Natezoinks]

@@AmisCorolla appreciate the comment, tell your friends! 🤣👏🏻👏🏻👏🏻

[@pdam6131]

Good testing protocols. I tested my ammo at a close range using a 22 pistol to simulate longer ranges with a rifle. In Clay at closer ranges I got massive expansion with the suppressor ammo. Apparently at 50 yards the bullet is going too slow for expansion. However is looks like the nose deformed to full caliber flat nose. The flatpoint will leave a pretty good wound channel.

[@CentralOregonSurvival]

Badass 22LR’s rifles….. sweet

[@frankbrowning328]

Update-I found that i can can substantially better terminal effect if I open the hollow point up on the 45gr Suppressor ammo. it works fine up close on pests without modifying it but at 35-70 yards it doesnt seem to open up very well unless I open the hollow point to 50% larger than it comes from the factory. Modified bullets at 50 yards it will anchor woodchucks with head shots and will leave a dime sized exit hole in a crows breast. The segmented rounds work beautifully on all pests out to 70 yards. I just got the 40 gr hollow points at 1050 which I plan to modifiy the same as the Suppressor ammo. Its cheaper and faster than the Suppressor . Hoping I can make it perform as its 1/2 the price of the segmented ammo in my area and in my guns its not as accurate as the Suppressor ammo

[@Natezoinks]

Great info! 👍🏻

[@lindawebster794]

Like the clay, no waste.

[@paullandreville5394]

I'll have to order segmented rounds. Hard to find in a store.

[@mikem.2078]

Wonderful to watch. Would like to see exact same, but from small revolver or pistol semi auto, maybe around 10 yards or such.

[@exothermal.sprocket]

Cut the clay block lengthwise through the impact axis. Nice results!

[@Natezoinks]

Such a simple fix, didn’t think of that. Thank you! 👍🏻

[@exothermal.sprocket]

@@Natezoinks Hey no problem!

[@Yasin_Abdul]

Great video big guy 👍🏽

[@RevN3]

Interesting experiments!

[@chandlerwood7599]

Great vid

[@UntamedOutlooks]

Am I the only one can’t find the segmented 1050 anywhere ?all I see is the segmented 710

[@Natezoinks]

@@UntamedOutlooks strange… I have a nice stockpile of it so I haven’t been looking. I’ll have to look around and see what I can find. 👍🏻

[@jdthewelder8308]

Good stuff. Well done.

[@Natezoinks]

@@jdthewelder8308 Thank you!

[@UntamedOutlooks]

What’s the barrel length on your rifle

[@Natezoinks]

16.5” on both

[@stevenzembriski6761]

Beautiful property can you try the CCI quiet semi auto?

[@Natezoinks]

Yeah, let me look into that. 👍🏻

[@kingjames9572]

Them Segments my favorite bullets 🤣🤣🤑🤑💯... aka Spittas🔱🔱🔱

[@bva8252]

Wow, just what I was looking for as I am trying to find the quietest subsonic hunting round. Is that the CZ with the 16.2 inch barrel that gives you the occasional supersonic crack? I have a 16.25 inch Browning and am wondering if I will get the same effect?

[@Natezoinks]

Yes, 16.5” barrel and occasionally (2-4 out of 10) get a super sonic crack. I wish it was a bit slower. Honestly think a 20” barrel could “slow it down” enough. Might be future testing, subscribe so you don’t miss it.

[@bva8252]

oh, i'm subscribed.. looks like i will have the same issue with my 16.25 inch bbl... But wouldn't a 20" barrel speed it up, not slow it down because more powder burn will increase velocity? @@Natezoinks

[@Natezoinks]

@@bva8252 some test have shown that the burn is done by 18”, and the 20” and 22” are slower. My 20” 10/22 is very quiet with most ammo.

[@bva8252]

Another question if you dont mind. Both the Subsonic lead hollow point and the segmented hp are 40 grains and rated at 1050 fps... Did you get a supersonic crack only with the segmented? Sounds like our rifles are similar size and I want to pick the best hunting load with no crack. Did you ever chronograph them? @@Natezoinks

[@Natezoinks]

@@bva8252 I don’t get the super sonic crack as much with the 40 grain hollow points. I have not chronographed them,… yet.

[@gb2A203]

Can’t tell me this isn’t a good defense round if it’s what you have.

[@user-ds9eq8zx2n]

CCI makes a segmented “Quiet”

[@Natezoinks]

Seen it, use it occasionally, not super accurate at 50 yards and beyond though in my testing. Great 25 yard round though. 👍🏻

[@tomquirin4231]

hey brotha nate, i am a new sub for ya here ! , i am a u.s. marine vet here 93' to 97' active ! , only have email here , would love to talk more , thanks n talk soon > tom !

[@legalise86]

Why ppl mount huge fkn scopes with 25 magnification on 22 lr?😂

[@Natezoinks]

@@legalise86 For shooting targets at 300-500 yards… same reason people use big scopes on a center fire at 1000+