Tips to sew binding on carpets - Car Upholstery

[@samhutson7966]

You’re like the front wheels of a learning experience and I am the back wheels!! You lead and I will try to follow!😂👍🏽👀

[@ВладимирМорозов-л4о]

Спасибо за ваши бесценные уроки, смотрю все ваши видео 👍👍👍

[@ЛехаБес-ш7у]

Аплодирую стоя!!!👏👏👏Какое удивительное отношение к мелочам- так спрятать финишный узелок может только тот , кто по-настоящему любит то что делает.🤝

[@va_dick6144]

Тоже заметил эту мелочь) Но из них и складывается мастерство

[@davido2047]

I always reference your videos prior to a project...how convenient I was going to bind some carpet. Great video and thank you!

[@Monagas1953]

Da gusto ver trabajos tan de buena calidad

[@beetlevert]

Last weekend I fought binding carpet with vinyl that had multiple inside and outside 90 degree corners. I would love to see a video that would address those sharp inside and outside corners.

[@Cechaflo]

Hopefully this video helps though the way of attaching the binding strip is different:kzbin.info/www/bejne/Z3yQoppsp9ufbc0si=i-UJhoFe8dsTTrQO&t=1028

[@beetlevert]

@@Cechaflo Thank you! But I really need the fold over from the front to the back binding like you did in this video instead of the wrap the edge and sew once raw edge type. I actually watched the one you just linked multiple times last weekend 😃

[@Cechaflo]

​@@beetlevert To deal with 90° corners or pointed angles following the method of this video it would be to start out in a corner and end on the other corner. The binding would be side by side. Unfortunately I have no video this way.

[@mustaphaizgnane2141]

Hello.good job

[@joselima4902]

Brenda Deus(halla🙏)sou fã, porque aprendo muito com o senhor,obrigada❤,eu sou Elivane,estou no celular do meu esposo 🤝🙏

[@richiparra5073]

Es lona lo que se le pone abajo de la alfombra? Exelente trabajo ✌️

[@Cechaflo]

Es un plastico 'antiderrapante'. Ayuda a dar mas consistencia al tapete y no permite que resbale. Estos tapetes pueden usarse en los carros o en casa. También hay antiderrapantes de hule/goma.

[@richiparra5073]

@@Cechaflo muchas gracias por tomarse el tiempo de contestar de antemano gracias

[@leroywoods3636]

Where can I get one of the edge roller guides?? I have an old Eco 45 phaff, will it fit on one of these old machines.. Thank you..

[@Cechaflo]

The description on Amazon ad does not mention Eco 45, but after watching a video I think the suspending edge guide would fit in the back of the machine. www.amazon.com/Sewing-Machine-Hanging-Suspended-Accessories/dp/B08BNQQW72 The Pfaff 1245 has small threaded holes (nuts) in the back where the device can be attached. In your machine, I don't know. But if necessary you could drill and make the thread for the screws to attach the guiding accessory.

[@salahsalah-w7z5h]

Pls sir which kind of glue that you use ??

[@Cechaflo]

kzbin.info/www/bejne/pWPblpiwmatridUsi=3KJU9iENpoAt_EYV&t=27

[@artexartex2410]

what machine do you use ?

[@Cechaflo]

Pfaff 1245-706

[@samhutson7966]

How wide is the binding??

[@Cechaflo]

The final binding is 10 mm wide. The binding strip is vinyl 40 mm wide.

[@jameslovering9158]

Is overlocking carpet a good option for car carpet material ? With binding it tends to cause a curl due to the stretch on corners.

[@Cechaflo]

I think so. I particularly like the serging of carpet edges. Unless I would have a carpet binding machine especially for the purpose. kzbin.info/www/bejne/n6K1aZWudpKcg5I Some attachments are useful to get flat corners on carpets, like this homemade one: kzbin.info/www/bejne/gpWtc4x_q9ylhKMsi=C3UmTnvh2HmnuYy6&t=871

[@byteme9718]

You can add or reduce the amount of binding "fullness" depending on whether you're dealing with inside or outside corners. Basic stuff on flat, stiff materials.

[@samhutson7966]

What size thread are you using??

[@Cechaflo]

Polyester thread 138 size

[@samhutson7966]

What is the material that you used to cover the bottom of the carpet??

[@Cechaflo]

@@samhutson7966 The material on the lower part is a non-sliding plastic for floor mats. It could be rubber too.

[@Headlights.restorations]

For long time I wanted to make myself carpets but I'm not familiar with the material on the lower part, the hard one on which to bind the carpet. Can you tell me how it's called?

[@Cechaflo]

The material on the lower part is a non-sliding plastic for floor mats. It could be rubber too.

[@edgarabeleda3236]

What type of adhesive you are using for upholstery?

[@Cechaflo]

The regular upholstery yellow glue (brushable) kzbin.info/www/bejne/pWPblpiwmatridU If you are located in the USA: www.ebay.com/itm/254593470049 (sprayable and brushable) www.ebay.com/itm/Petronio-Master-All-Purpose-Contact-Cement-Leather-Craft-Glue-She-Repair/112451310211?_ul=AR (brushable)

[@andrewchambers7661]

Weld wood upholstery and vinyl top adhesive. You can run it through a cheap cup gun for paint. Available at keyston bros or any upholstery suppliers

[@НазарНусналим]

Где можно приобрести такой ограничительный ролик на машинку?

[@Cechaflo]

www.amazon.com/KUNPENG-KG-1245-suspending-guide-Pfaff/dp/B077MTSHBB

[@mdmubeenali7056]

First comment