Celestial Hope | Epoxy Resin & Crystal Quartz

This was such a fun custom build!
This was made over the span of a week over tik tok live.
This was made using crushed glass, crushed Quartz, crystal points and a wooden panel canvas as the base. Of course the entire pour is made from epoxy resin.
Pigments used were from the geode collection of Meyspring:
www.Meyspring.com
Epoxy brand used is Magic Resin:
www.magicresin.com
#canvas #epoxyresin #art #geodeart #quartz

[@csbmb130]

Thaaaaat is amazing. I cant find strong word hiw to say Its extremely great work Thank you so much for sharing it I Love it so so much

[@EllePours]

Thank you so much! This is beyond kind of you to say!

[@kathrynhawleyquaife8679]

❤i absolutely adore this one. Favorite so far. Love the lines. Crisp lines and beautiful combination of colors. Well done!! Cheers🥂

[@EllePours]

Wow thank you so much!!! 🥰🥰🥰

[@aprilking8092]

This piece is gorgeous. I would love to make one for my living room😍

[@EllePours]

Thank you so much!!! 🥰🥰

[@WallasGirl]

WONDERFULL, GREAT, AMAZING

[@HopeDesigns]

Beautiful

[@EllePours]

Thank you so much!!! 🥰🥰

[@foufadoudou1022]

Magnifique ❤️

[@nidaAfsar]

Marvelous love from Pakistan 🇵🇰 😍 ❤️

[@EllePours]

Thank you so much!!! 🥰🥰

[@jenniferrhoads6058]

what are the exact colors from meyspring did you use what are they called I love the blue what colors did you mix to get that?

[@brendisprao9196]

Muy lindo muchas gracias por compartir el proceso. Como se llama lo que usas para ponerle aire al cuadro. Es un soplador de cabello?

[@accenttraining4professiona864]

Really pretty geode! Is this a thick resin or so you wait to pour it until it thickens?

[@EllePours]

Thank you so much!! I just waited about 10 minutes before I started pouring. I use Magic Resin as my brand and I find you have about a 40-45 minute window depending on how much you mix. If I want finer lines I wait a few minutes before I start pouring!

[@MsLightspirit]

Lovely but did you forget your edges or do you prefer them to be left? Personally I like my edges covered the same as the geode to look nice and finished off. But still beautiful indeed, well done!

[@EllePours]

Haha I painted them black after shooting the video! I prefer it sometimes left but after editing and looking at them more it bothered me and I decided to paint them 😂 sometimes I really love it left. Truly depends on if the client wants it.

[@EllePours]

I also work very long hours and it’s hard getting shots of my work during daylight hours so sometimes I take videos and post and then change those little details after! (KZbin, Instagram and tik tok posting overtop of selling and making customs plus a full time career gets really busy!)

[@gagandhanjal87]

Where to get these big boards from.. And how do you hang it? Do they come ready with hinges etc

[@EllePours]

I get these ones from Curry’s Art Supply under “wooden panel” and you can hang as is (the back is like a canvas) or add hooks or hinges to them. I add hooks to most of my canvases depending on weight.

[@TodoOnada_wtv]

What material I need? I can use wood as a frame?

[@brendisprao9196]

Cuantas horas se deja secar para ponerle la resina final?

[@VitalityVogue]

Beautiful creation! Did you make it on plywood and what size and thickness was the plywood? Did you sand or treat the plywood?

[@EllePours]

Thanks so much!! This one was made using a wooden panel from curry’s art supply 🥰🥰 I personally didn’t sand it. I usually prep with white paint first, this one I did not though. Hope that helps!

[@heidismith6148]

Just wondering why you didn't clean up the sides?

[@EllePours]

I actually did after! Wondering why you’re asking me this?

[@nakitamoore5184]

I would like to learn how to do this

[@offshore557]

So that’s just a regular piece of plywood you poured epoxy on?

[@EllePours]

I purchase my wooden panels from curry’s art supply!

[@rahofa6213]

هل كان السكب على لوح خشب دون غلق المسام اشرحي لي رجاء ً

[@lilbabe454]

Hi what are the measurements for this? Is this for sale?

[@EllePours]

Hey there! This was a custom make, this is a 12 X 18 inches. I do have some for sale on my website! www.ellepours.ca but unfortunately not this one!

[@laylasabri2159]

ارجوكم ماهي المادة السائلة التي تخلط مع البيرلات والاحجار. ارجو المساعده

[@classytike]

Where can I find the large crystals?

[@EllePours]

I typically find my bigger ones at markets or crystal shops! The smaller ones I sometimes buy from wholesale sellers online :)

[@laibanabeel1200]

i wanna make this but i’m scared😭 i’ve got a few questions firstly did you use the epoxy hardener secondly you mixed the pigment with the resin right? and how long does it take to harden could you walk me through the process thank you!!

[@laibanabeel1200]

and if i don’t have the orange blow thingy can i use a hairdryer?

[@EllePours]

Hey there! I mixed the hardener and the resin 1:1 (mix for minimum 4 minutes) and add your pigments. You can mix multiple pigments together if you’re creating a custom colour too! The curing time depends on the brand of resin you are using. It’s typically toxic to touch for about 24/48 hours but it’s usually hardened after about 9-12 hours for each layer with Resin Art Flow. I just use gloves to detail if it’s earlier than a 24 hour span.

[@EllePours]

@@laibanabeel1200 I personally recommend a hand drier more. You can use a blow dried but you won’t have a lot of control over your piece if you’re moving stuff around. I found when I tried it wasn’t something that worked well enough and as a hairstylist I used a very high end drier and still was disappointed. That is all preference though, no right or wrong! 🥰

[@EllePours]

PS always wear a respirator and gloves. Don’t get it on your skin and protect your lungs. Even if a brand says it’s safe it’s not (using a room purifier will literally tell you how toxic the air is while you’re using this) so try keeping it away from your living space and somewhere with good airflow! Super important!

[@laibanabeel1200]

@@EllePours thank you so much☹️🤍

[@dorothygrierson2740]

This is very close up .no one can see your work as it evolves, just bits of it .xx

[@EllePours]

This is a very old video and I was still just learning at this time.