Celtic Cross..Router/scroll saw project

[@derekpeterson5123]

Great job! turned out beautiful. Thanks for sharing your time and talent!

[@fishtank5050]

Thank you I appreciate your comment 👍

[@artadams1]

If you made that with a CNC it would be Meh, but the fact that you did it by hand is what impresses me. I own a small CNC woodshop and do projects like this all the time, however, the machine does the heaving lifting. I never carve anything by hand. I think you did a fantastic job!

[@fishtank5050]

Thank you ,it's just a hobby for me so I'm happy to take my time and hand route..all part of the enjoyment of the piece 😀 👍

[@paulthompson9593]

Your a inspiration, I could listen to you all day, So calming and educational...Thankyou

[@fishtank5050]

Thank you Paul, I appreciate your comment 👍

[@donnyhernandez635]

beautiful Celtic Cross,great demo as usual, loved it, thanx 4 sharing God Bless

[@fishtank5050]

Thank you Donny, I'm pleased with this one, just goes to show what you can make with basic,cheap tools 👍

[@gailjohnson3544]

Hi, you are so inspiring to me, being disabled was have to learn something new in life, then I found you. Thank you for what you do. I will follow you as long as you are making new craft. I really what to learn everything from you. Keep the videos coming. I pray a family member follow your trade

[@fishtank5050]

Thank you Gail I appreciate your comment, I'm always trying different things from router to scroll saw to resin and carving..😁👍

[@albertocavagna8575]

Bellísima cruz,muy buen trabajo!

[@fishtank5050]

Thank you 😊

[@raymondscott8499]

I need to stop browsing YT Heres another project to try.Lovely work beautifully carried out.Thanks

[@fishtank5050]

Thankyou..i get alot of ideas from YT ....

[@birdbandit9]

Just came across your channel. Great videos and explanations. I'm excited to watch the rest of your videos. Thank you for putting your content out there for us to see!

[@fishtank5050]

Thankyou for the positive comment, I base my videos on the beginner,so i tend to talk to much..Haha

[@patrickkelly3468]

Great video! Very talented.

[@fishtank5050]

Thank you,just a hobby for me,i appreciate your comment 👍

[@pteddie6965]

this is another great looking project

[@fishtank5050]

Thank you,this one takes me back a bit..👍👍

[@woodsignsbydesign5598]

Great video. Loved the dremel burr to give depth on the ribbons. My comment would be about boiled linseed oil will yellow your piece over time. I would suggest 50/50 tung oil and citrus solvent.

[@fishtank5050]

Thanks for the comment, I've never kept any of my projects so a wouldn't know about the colouring, I've used Danish oils and tung oils ..

[@stephanievanorden1765]

That Cross is beautiful!

[@fishtank5050]

Thankyou..it turned out ok for my first one..

[@2HME]

Very nice, you're making me want to have a go at some CNC bits...

[@fishtank5050]

I can not recommend them enough, great little things and really cheap..thanks for the positive comment..

[@wood4nothing284]

That's really neat,top job Cheers Tim from Wood 4 Nothing

[@fishtank5050]

I am pleased with this one..cheers Tim

[@wood4nothing284]

@@fishtank5050 you should be mate it's really cool Cheers Tim

[@tashapalmer4519]

WOW!!! looking for how to make my mum a celtic cross for her birthday. Now I feel confident to try it. Thank you so much :)

[@fishtank5050]

Thankyou for the positive comment,give it a go, the end result is worth it..

[@tashapalmer4519]

fishtank5050 I couldn’t buy the CNC bit so ended up buying a Bremel rotary tool and did it that way. I slipped a few times and cut out more than I wanted but as my mums birthday is Tuesday it will have to do. I’ll cut it out with the scroll saw tomorrow and then have a go at sanding the edges with the Bremel. Where did you get the piece that makes the Cnc bit 1/4 inch? I’m keen to be able to try using my router and a bit like that down the track. Thanks

[@fishtank5050]

@@tashapalmer4519 it's called a collet, I get mine from Ebay but Amazon sell them also,I hope your project turned out ok..

[@fishtank5050]

rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F191938780949

[@tashapalmer4519]

@@fishtank5050 I found them on ebay, so thank you. I'll order one soon. I couldn't wait for ebay this time. I finished it last night. What bit were you using on the end of your Dremel to sand? It didn't look like the sanding attachments that came with mine.

[@vaelenorg]

Lovely video, thank you!

[@fishtank5050]

Thank you 😊

[@paulstrange6654]

Great job

[@fishtank5050]

Thank you 👍

[@christophersmith7691]

Just stumbled on your channel excellent content new subscriber,any chance you could put a link to your choice of CNC router bits. Now watching the other projects. Regards Chris

[@fishtank5050]

Thanks for the sub loads of different cnc bits to fit a router,dont forget you will need a collet.rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F172213663526

[@islay30]

Loving your work, engraving wood is something I've never considered before but I will now. Where do you get your graphics from, they're very good? Best regards Terry.

[@fishtank5050]

Thankyou Terry I appreciate the comment, I normally search Google, just put templates or stencils ,even silhouettes after what you are searching for..like celtic cross template....

[@datilman9146]

What is the width of the wood you started with? Let me tell you this you did a damn good job, looks beautiful!!

[@fishtank5050]

Thankyou, the wood size was 8.5"W x11"H..I wish I had gone bigger now..

[@redwood1957]

nice job Could you do a video on how you make your templates? Thank you for what you do.

[@fishtank5050]

Just Google celtic cross template, plenty to go at ..

[@redwood1957]

yes I know how to find art work. How do you size the art work?

[@fishtank5050]

@@redwood1957 I use a app called rasterizer,its free or just crop from my phone,a4 size..

[@gailjohnson3544]

Hi there, are you using 20 degree bit

[@fishtank5050]

Yes on this one,I normally use 20 or 15 degree bits nowadays 👍

[@farscape3100]

thats awesome

[@fishtank5050]

Cheers bud.iam pleased with this one..

[@belfast01uk]

Respect

[@fishtank5050]

Thank you 😊

[@gailjohnson3544]

What size are the bits

[@fishtank5050]

The bit shank is 3.175mm so you need an adaptor reducer 6.35mm so they fit a 1/4"shank router..if you check my latest videos I've started putting links in the description 😉

[@waynebreier1682]

Brilliant

[@fishtank5050]

Thankyou, I appreciate the comment..

[@waynebreier1682]

Seriously I’m very impressed. Your videos inspire me .

[@fishtank5050]

@@waynebreier1682thankyou, I base my videos on the newbie to the hobby,so I tend to talk to much..but I'm working on that..Haha

[@waynebreier1682]

fishtank5050 talking good i’d rather tutorial to explain. Keep up the good work

[@ronaldlowis225]

Where did you get thetemplate

[@fishtank5050]

Google celtic cross template..😉👍

[@norbo1536]

could you link the template? Thanks

[@fishtank5050]

Search celtic Cross silhouettes..plenty to go at.. images.app.goo.gl/YWH9pWnQYMENuNkP6

[@norbo1536]

@@fishtank5050 Great - Thanks - Vielen Dank - Greetings from Germany

[@fishtank5050]

@@norbo1536 no problem, hope yours turns out great..😁👍

[@MrAndersonInformática]

Whats this

[@fishtank5050]

What's it look like..