Cerakote High Temperature Ceramic Coating Application Video

[@Cerakote]

While both the H and C series coatings are extremely durable, the H series is a better choice in a non-high temp application because of its industry leading corrosion protection. Please call us at 866-774-7628 if you have any further questions.

[@Cerakote]

Cerakote is Distributed in Europe by exhaust-coating.de. Products are in stock and ready to ship throughout Europe. We also have a training facility in Germany if you need any assistance with application. Marco is the contact at [phone]

[@Cerakote]

@THESTUTTERINGUNNER Absolutely, check out our C-Series and V-Series coatings, for more information call 866-774-7628 and our new hi-temp website will be up shortly (CerakoteHighTemp com)

[@Cerakote]

The plasma spray system is generally used for alumina, zirconia or titania based ceramics, while the air cure utilizes a proprietary inorganic/organic polymer based ceramic.

[@Cerakote]

The plasma spray ceramic coating system involves heating a ceramic powder via a plasma jet onto a substrate. The flame accelerates the ceramic particles, converting them to molten droplets, which collect on the substrate and solidify to form the coating. NIC Industries air cure ceramic coating involves spraying a liquid ceramic, which hardens naturally in ambient air.

[@expertwebworld6189]

ceramic coating are used for everything it is wonderful technology

[@Cerakote]

The main difference is in the plasma system a user starts with a solid powder, and must use the plasma flame to convert the solid into a liquid, which then converts back into a solid after being coated onto the substrate. The air cure system begins with the ceramic already in liquid form, and then converts to a solid once coated on the substrate. Another difference is the cermaics involved in each process.

[@resistnine]

I understand that the H series is a better corrosion inhibitor but how does the C series compare to H in abration resistence?

[@Cerakote]

While the C Series is the best performing high temperature coating available in the industry, the Cerakote H series coating has better overall performance when used on non- high temp applications under 500F. Keep in mind that H Series can be used on most firearm components other than optics and can be cured between 150F and 300F depending on the material being coated. Please refer to our training manual in the resources section at Cerakote, com for specific cure schedules.

[@Purepain76]

Can the Cerakote C series air dry be used like the H series and be oven cured on parts that are safe to expose to the oven curing process ? In other words can I bake cure my slide if I apply the c series air dry Cerakote ? Thanks for the help and great video but even better product

[@Cerakote]

The H-Series has a hardness rating of 9 in ASTM testing, while the C-Series has a hardness rating of 6 to 7. You can see all our test data at CerakoteGunCoatings(dot)com.

Cerakote Hightemp now also in Vienna Austria!!

[@Cerakote]

C-Series should only be used for high temp applications between 500F and 1700F, such as full auto and suppressed full auto applications. All other applications, including semi auto suppressed firearms should be coated with the H Series Cerakote. C-series should also be used to coat optics and other substrates which cannot be thermally cured between 150F and 250F.

[@tismgarage]

i have used cerakote on many of my customers and my own firearms and will never go back to duracoat and am looking into doing other products like engine parts, do you think this coating would hold up on a drag race motor?

[@hollowpoint76]

how do you get the insulkote on the inside of the pipes etc?

[@hollowpoint76]

+Mark Hummel What the hell are you talking about? You do so do it - do you actually know what Insulkote is used for??? Let me just share what NIC says about this product: From their website - Insulkote (Oven Cure) Item: W-209Q Description:Insulkote is an oven cured ceramic coating that is typically used as an internal thermal barrier coating on exhaust. The most common use for Insulkote is as an internal coating for exhaust pipes, headers and manifolds. - So - do you know what "internal" means??? My Application trainer does this all the time at his shop - Ive seen heaps of different pipes and headers etc with this coated on the INSIDE!!! I already have been Certified and gun coating with their products for years and have also been using their Prismatic powders - I'm booked in for my Automotive applicators certification next month and was inquiring of people that may already use it how they do it to compare with the methods I will be taught - which IS part of the certification.... Clearly you have no experience or are a certified applicator....

[@atchydroeng]

Hi,mind to share what is the different of air cure ceramic coating spray system compare to Plasma spray ceramic coating system? Thanks

[@waffenmacht]

Is Cerakote C more durable then Cerakote H when used in a non-hi temp application?

[@jmsprodesigns6902]

Where is a good place to buy the coating so I can do it my self

[@ppip15]

what would be the ideal coating for firearms? the C series or the H?

[@devantewatts2390]

Can this be sprayed on a whole car chassis

[@Cerakote]

devante watts Technically, yes, but it would be very expensive!

[@billy99100]

It says the parts can be installed 24 hours later.. But then it says Do Not Use parts until fully cured 5 days. I read on your website. The video says you dont need to wait the full 5 days? Can I install my exhaust and run my car 24 hours later?

[@Cerakote]

Parts are about 90% fully cured after 24 hours, so you can install the parts, but we recommend not running them hard until a good 5 days of curing.

[@hardluckforgesupply5972]

Does the part not require a degreaser soak prior to blasting in something like simple green when this product is going to be used?

[@Cerakote]

You will want to make sure the part is clean prior to blasting, but it does not require a soak in degreaser.

[@hardluckforgesupply5972]

Cerakote Thank you for the response! I use oils during fabrication on the parts.

[@timbaker6774]

i work in a manufacturing environment with gas fire pits, our engineering team has been researching basalt to be used as a so or flame retardant an heat dispersion, how would cerakote hold up against direct flame engagement under diffrent weather conditions?

[@Cerakote]

H-Series will have temperature stability up to 500*F, while the C-Series will be stable up to 2000*F an any weather conditions.

[@timbaker6774]

Cerakote thanks for the quick reply, ill forward this to my lead.

[@biggarmach]

I know this is off topic but what kind of blasting cabinet is that?

[@Cerakote]

We recommend the Empire Blast 3648 SRB System. Thank you!

[@psychomoto8181]

When applying c-series how long should I allow that item to cure before I add the stenciling and second coat?

[@Cerakote]

It just has to be tack free, which depends on humidity (the more humid, the faster it cures), but generally that's about 30-45 minutes. May be best to do a test piece to get a better read on when it becomes tack free in your area.

[@rodrigosamano8730]

Is there a color that can be used as a grey primer?

[@Cerakote]

No, Cerakote does not require a primer and we do not recommend putting any other coatings over Cerakote as they will not adhere properly.

[@bearewhite]

Can you do this technique to 18 inch rims? How much would it cost?

[@Cerakote]

bearewhite You could, since we are the manufacturer, we recommend finding a local Certified Cerakote Applicator at CerakoteHighTemp.com

[@Cerakote]

@totti8427 What is your question?

[@totti8427]

Hello i have a question

[@Cerakote]

@stormtactical Send pictures when your done with the project.

[@franciscallahan4213]

Do you need to do all of this prep and sandblast brand new stainless headers before painting?

[@Cerakote]

You would just want to be sure they are thoroughly degreased.

[@franciscallahan4213]

@@Cerakote thanks for the quick reply! Would it be necessary to spray the inside as well? And also what life expectancy does this have and about how long would this last before it starts chipping or burning off? Or should I be able to expect many years out of it?

[@Cerakote]

It depends a lot on the use of the engine - there are several top fuel drag teams that use it successfully, though unfortunately we can't say who per NDAs. But if the big boys are using it....

[@abunaiN1]

can i apply cerakote with a brush on exhaust ?

[@Cerakote]

abunai888 you need to use an HVLP spray gun for application.

[@ouelketken5076]

Can i put 2 coat if i sand between each coat and i don't exceed the max thickness???

[@Cerakote]

You wouldn't want to fully cure the base coat if you are doing two coats (colors) - there is no reason to do two coats of the same color as one coating of 1 mil will provide best results.

[@ouelketken5076]

My part are fully cured and i need a seconde coat because some place dont have enough paint i see the metal .. only solution is to start over ?

[@Cerakote]

Unfortunately yes - once Cerakote is cured, it does not adhere to itself. You want to be sure to liberally apply the coating to fully wet out the part.

[@ouelketken5076]

why after the sandblast do not wash the part with acetone for example? if I wait the part completly dry before paint ?

[@Cerakote]

You can just blow it off with some air and you'll be ready to coat. You could blow off, then wash again in acetone, and let completely dry but it adds another step and there could still be wet acetone on the part that would not allow for optimum coating adhesion.

[@abdulgalib4476]

is it safe for titanium ( motorcycle ) full system exhaust with brand etching on the silencer ??! ...

[@Cerakote]

Yes, titanium can be coated - it's very thin so any etched logos will still show through (coating is 0.001" thick)

[@abdulgalib4476]

+Cerakote any Cerakote applicator in Indonesia , planning to coating my 2016 Duca Panigale R & 1299 Panigale S Anniversario since both exhaust is really hot around my groin & roasting my nuts ...

[@Cerakote]

You can check to find the nearest applicator at www.cerakoteguncoatings.com/resource/locator/ or at www.cerakotehightemp.com/resource/locator/ - thank you!

[@abdulgalib4476]

+Cerakote looks like there's no Cerakote applicator in Indonesia ... 😓

[@saberebr1348]

hi can i coat mini jet blades with this?

[@Cerakote]

It could be done, you may want to try a sample part to check for tolerances if it's a tight tolerance component.

[@4G63DSMPOWER]

how much paint is needed for a turbo manifold and downpipe

[@Cerakote]

2GeclipseGSX If you got a pint that would be plenty. A little coating goes a long ways.

[@4G63DSMPOWER]

Cerakote cool thanks for the reply. you ship worldwide? I think I read you were not in the usa. do you ship to usa?

[@Cerakote]

We're located in Southern Oregon, in the USA. We do ship Internationally, please call 1-866-774-7628 to place an International order. Thank you!

[@4G63DSMPOWER]

Cerakote ok sweet I thought I seen somewhere say you were across seas. that's awesome I am only in southern washtington.

[@salalbugti208]

niceee

[@clydesmith4223]

how do I find a dealer in the n. east area

[@Cerakote]

You can find a local Certified Cerakote Applicator at www.cerakoteguncoatings.com/resource/locator - thank you!

[@Cougar139tweak]

.........Do not taunt Cerakote High Temperature Ceramic Coating.

[@valbeaumont8402]

This is ordinary ceramic paint and NOT plasma-applied molten ceramic.

[@Cerakote]

There is no plasma application - it's a polymer ceramic coating applied with an HVLP spray gun.

[@Tuffenough4u]

He is referring to the plasma applied coating that was originally developed for the nuclear industry that leaked it's way down to aerospace and automotive industries over time. Not sure why it concerned him enough to post about it "as if you guys made some sort of false claim", because the idea of self application is more or less a pipe dream reserved for the rich and or major parts manufacturing facilities. It's not even in the same category in regards to application complexity and accessibility and not worth mentioning in retrospect.

[@fukluk88]

Spelt "RESPERATOR" wrong @ around 3:30 It's "RESPIRATOR".

[@JohnSmith-yb6sd]

get a life

[@johnehrig9186]

it's "Spelled", not "Spelt"