Decided it was time to Cerakote the Proof Research barrel for the AI in 6mm Creedmoor. Step by step process for Cerakote application.
Пікірлер: 213
@williampankratz600 Жыл бұрын
Thanks for the lesson on that, the hard part is getting the equipment and everything else is really pretty easy
@ecshreds2 жыл бұрын
Great! Easy, detailed and not boring to watch. Beats the other videos with just the basics. Thank you.
@45auto4 жыл бұрын
That explains why a quality cerakote job doesn't cost $39.99.
@XRING4 жыл бұрын
Exactly!!
@thesaint15174 жыл бұрын
First time I see a cerakote treatment and I really enjoyed watching explaining step by step a delicate process in order to get it right. Now we need to see the video with this barrel in action. Keep them coming.
@XRING4 жыл бұрын
Will do Antonio and thanks for watching the channel.
@lukeflaugher53344 жыл бұрын
I look forward to seeing the barrel when it’s mounted on the gun. Thanks for letting us watch and learn on this process!!
@XRING4 жыл бұрын
Thanks Luke and thanks for watching. I will make sure to show a good view of the barrel mounted on the next outing.
@disco45354 жыл бұрын
This was awesome seeing all the steps and equipment that go into cerakoting
@XRING4 жыл бұрын
Thanks Disco and thanks for watching. .
@22lr_plinking4 жыл бұрын
👍👍 I had no clue the process was so involved great video. Thanks
@JerrBearTactical4 жыл бұрын
Wow ... that was very cool to see the whole process done. Thanks for sharing Ray😁👍🇺🇸👊🦅
@XRING4 жыл бұрын
My pleasure JerrBear. Thanks again for watching the channel.
@tjparker90974 жыл бұрын
Excellent! Thanks for sharing the process.
@XRING4 жыл бұрын
My pleasure TJ
@jeffguy38684 жыл бұрын
Excellent work thanks for the video
@XRING4 жыл бұрын
My pleasure Jeff. Thanks for watching the channel.
@joaquin-jacknava26964 жыл бұрын
Great video. The barrel looks nice. Thanks for sharing the video.
@XRING4 жыл бұрын
Thanks Joaquin and thanks for watching.
@orionfixr77134 жыл бұрын
X-Ring is X-pert in all things ! A real master of all trades . Thanks for the insight .
@XRING4 жыл бұрын
That might be a little bit much but I think I am well rounded. I appreciate you watching and commenting on the channel. Thank you.
@biagiocozza88754 жыл бұрын
Great video mate, it helps to have the right equipment for the job.
@4g63attack4 жыл бұрын
yup prep work is the most important step in any final finish done.... for example like the colt python royal blue....
@carfvallrightsreservedwith66493 жыл бұрын
Having applied high performance coatings for over two decades I want to commend you on your demonstration/explanation throughout the process. WELL DONE.
@gerardoemiliano22452 жыл бұрын
I guess im randomly asking but does any of you know a tool to get back into an instagram account?? I was dumb forgot the login password. I love any assistance you can offer me.
@wilsonkingston52122 жыл бұрын
@Gerardo Emiliano Instablaster ;)
@gerardoemiliano22452 жыл бұрын
@Wilson Kingston i really appreciate your reply. I got to the site on google and im waiting for the hacking stuff atm. I see it takes quite some time so I will reply here later with my results.
@gerardoemiliano22452 жыл бұрын
@Wilson Kingston it worked and I now got access to my account again. I'm so happy:D Thank you so much you really help me out!
@wilsonkingston52122 жыл бұрын
@Gerardo Emiliano No problem :D
@robertreynolds92284 жыл бұрын
Excellent job my guy. Thats nice to have top end equipment. Have a good day.
@XRING4 жыл бұрын
Thanks Robert and thank you for watching.
@Booneboarder Жыл бұрын
Awesome video and info. Thanks for sharing. I really like that software and getting the mixture right the first time. Thanks
@XRING Жыл бұрын
Glad it was helpful! Thanks for watching the channel.
@steelpunisher69444 жыл бұрын
Very cool video. I've never done this so it was nice to see the steps involved. It came out nice. I like that color. Good stuff as always X-RING
@XRING4 жыл бұрын
Thanks Steel Punisher. Glad I could show this on the channel. Thank you and have a great week.
@Greatoneguy4 жыл бұрын
Great video man. Good job.
@XRING4 жыл бұрын
Thanks Earth Man And thank you for watching
@aaaaa19572 жыл бұрын
Thanks for sharing. I like the color.
@jerryjohnsonii41814 жыл бұрын
Very interesting process to Cerakoting !!!!!!!!!!
@dyoung17714 жыл бұрын
Cool video,Ray! My barrel is in the mail.
@jamesrae53514 жыл бұрын
Very informative and interesting. Thanks.
@piercem566 ай бұрын
Damn you’re in phenomenal shape dude I have always seen you in hoodies. I need to get on your workout program.
@jasonlopez80114 жыл бұрын
Great job X ...blessed to have access to all that equipment.. going to look nice on that rifle ...2 👍👍up yo..
@XRING4 жыл бұрын
Absolutely Jason. It is truly a blessing.
@jackson74214 жыл бұрын
I can’t believe you didn’t let Rick at it with some Krylon. LoL. Actually it was a great video and great results 👍
@XRING4 жыл бұрын
Thanks Jackson and thanks for watching the process.
@fumasterchu124 жыл бұрын
That is a good looking shop, reminds me of work though. I like that color, turned out very well brother!
@XRING4 жыл бұрын
Thanks Fumaster. It matches almost perfectly. Thanks for watching.
@scottf.38084 жыл бұрын
Nice job as cool to take us along on it....Good stuff....
@XRING4 жыл бұрын
Thanks Scott and I appreciate you watching.
@blahbadyblah79283 жыл бұрын
You just sold a Skat blasting cabinet. That thing is awesome!
@earlmace4 жыл бұрын
Terrific video - knowledge and skill. Maxwell House is "good to the last drop". Folgers "can't believe it's not fresh brewed".
@SaltySeaDawg1257 ай бұрын
He said I want to go for about forty grams because I want to, oohhh! 😂😂😂. Thanks for the video.
@keithburns57074 жыл бұрын
Good video thanks for the tips. I use the cold process you don’t have to mix any catalyst with it and I’ve had real good luck with it but thanks for the information
@AlaskanBallistics4 жыл бұрын
Wow i had no idea how intense the process was.
@XRING4 жыл бұрын
I think most people are surprised when they see it done the proper way. Layering Cerakote adds a whole new dimension when done properly. Timing is critical, dry Cerakote won’t adhere properly to itself if the flash time is off.
@PatriotPaulUSA3 жыл бұрын
Holy cow did they let you use the Cerakote factory shop? Some crazy nice expensive equipment in there! Nice job!, your video was very clear and thorough!
@joquin46184 жыл бұрын
In before “it’s just as good as my rattle can spray paint palmetto state AR” !! 🤭😂😂 Great job guys !
@XRING4 жыл бұрын
LOL! Thanks Jo Quin. I have seen good and bad Cerakote jobs for sure.
@olamorken4 жыл бұрын
Nice work!
@XRING4 жыл бұрын
Thank you.
@badbilly4294 жыл бұрын
Awesome video man! More perks of the job! You are like the worlds greatest handyman! Rick should have let you cerakote his tikka lol
@XRING4 жыл бұрын
LOL. Thanks, but Rick really likes his spray bomb paint jobs.😂
@T.A.B.Videos4 жыл бұрын
Looks great
@XRING4 жыл бұрын
Thanks treesablowin, I hope you have been well.
@archangel200314 жыл бұрын
I guess some kind of tape might do, but for a real solid cover, heat shrink tubing is best for sand and bead blasting as it stays tight and will not unwind. Just pull it off before baking. Almost the same prep for Parkerizing but you let it soak in hot Parkerizing fluid, then rinse in hot water, then soak in hot oil that is allowed to cool. The oil will be impregnated into the Parkerized coating.
@jcknives41624 жыл бұрын
Great video. Thanks!!
@XRING4 жыл бұрын
Thanks JC and thanks for watching.
@centurionjeff4 жыл бұрын
Couldn’t you have just added the catalyst to the paint without zeroing the scale? The program gave the total weight on the screen. No final wipe down after the blaster?
@bnicedanicest62884 жыл бұрын
Great video, I just use the C series been my experience the baked on just rubs through anyway not ever really on the barrel but the handguard will and if you carry it a lot for hunting ( I do a lot of predator in the winter) it'll rub through around the mag well, trigger opening on your trigger finger side the safety, bolt release and mag release and when it does its bare shiny metal showing through on my factory finished baked Cerakoted rifle that's why I prefer black anodized, cpq'd and just clean with acetone and Cerakote w/ C series air dried and when it does eventually wear through it'll be just the black anodized surface peeking through in some spots and much easier to do Camo patterns with to as well as all my scopes Bipods mags I'm in the coatings industry anyway and applied all kinds different different stuff so I just set it up in my shed hang my parts with electrical wire or hangers from a 2x4 set on ladder rungs between 2 different ladders I'll do solid colors in no time keep up the great videos thx
@XRING4 жыл бұрын
I appreciate the feedback bNICE and thanks for watching the channel. I wasn’t going to be too particular on the barrel but shiny steel really didn’t match the setup. I don’t normally Cerakote my guns but when I do, it is usually done this way.
@honestguy63453 жыл бұрын
H and elite series cerakote does just rub off from carrying the firearm. More than likely there were issues the application itself. I messed up on quite a few projects before I got it down.
@daverieck63524 жыл бұрын
enjoyed that , thank u
@Skilpadjie14 жыл бұрын
Nice video.
@ElfstersRiflesandReloading4 жыл бұрын
Nice work bud!
@XRING4 жыл бұрын
Thanks Todd.
@bryanduchane23714 жыл бұрын
I use Teflon plumbers tape to cover the threads of a barrel to keep the Cerakote of the threads.
@XRING4 жыл бұрын
That would be an option as well.
@borries42224 жыл бұрын
nice to see you use metric sometimes for our metric guys
@rickyburton46424 жыл бұрын
Excellent!😃🇺🇸👍👍
@robertm84014 жыл бұрын
Cheers and thanks for sharing, this is very cool and informative. I was worried you didn't have a respirator on there while spraying, seeing that the catalyst was that nasty.
@XRING4 жыл бұрын
Thanks Robert. I definitely have and use all of the safety gear when applying finishes.
@douglaswelch88362 жыл бұрын
And the good to the last drop was Maxwell coffee 😂🤣
@cutchya4 жыл бұрын
Thanks !
@XRING4 жыл бұрын
You are welcome !
@paulhughes39614 жыл бұрын
Nice job.
@XRING4 жыл бұрын
Thanks Paul and thanks for watching the channel.
@diversify2104 жыл бұрын
So basically I have everything I need to cerakote firearms. I build custom cabinets and do a small amount of metal work for a living. So I have HVLP, and sand blast cabinet, and a spray booth. All I need is a big ass container of simple green and an oven and Im good to go. My neighbors are actually getting ready to through out their old oven. I think Ill be taking it off their hands after seeing this.
@XRING4 жыл бұрын
Yes you do Mav. Many many people use an oven and a spray gun to do Cerakote jobs.
@Sms683 жыл бұрын
That place is cleaner than Church Altar
@ExtremeDIYGuy3 жыл бұрын
Nice video! I just put up a two part series on Cerakoting at home. My equipment is a bit more cruder than yours (and yes, I am jealous lol). I wanted to do Cerakoting gun parts on my channel but already got a warning for an AR video I did (which YT took down) so am keeping my Cerakoting videos to knives and such. One quick question, Cerakote is pretty adamant about using 18:1 ratios on their Elite line, I'm assuming a slightly higher ratio doesn't impact it any? I've used elite series successfully at 18:1 and do a lot in their H series, which gives you a pretty wide latitude in your ratios. Was wondering how much runway you have on either side of 18:1 for the elite series there is. Thanks again for the great video.
@conservativesniperhunter74394 жыл бұрын
That there was a professional Cerakoting job . I reckon Rick will be sanding his spray painted barrel on his Tikka TAC A1 after watching this video and will be sending to Xring for a permanent Cerakote finish real soon 😀.
@XRING4 жыл бұрын
LoL Conservative Sniper.........NOT happening. He is in love with his Krylon.
@conservativesniperhunter74394 жыл бұрын
@X-RING 😆😂
@amsb4dafunk4064 жыл бұрын
So much nice. Us common folk Have to make do with Harbor Freight sand blasters George Foreman Grills And DIY solar ovens for Barrels
@XRING4 жыл бұрын
LoL! I have used some of those things a time or two. Necessity is the mother of all inventions !
@CRRTspecialist4 жыл бұрын
I'm sure this has been asked but I would like an entry rifle just to practice with then maybe hunt with( thinking .308) but what would be a decent rifle to get. I've seen review on the remington 700 sps tactical. Get basics down then maybe either upgrade it since it is on the 700 action or just full upgrade. What would you recommend?
@gsxr1k8834 жыл бұрын
Great video! I do this frequently and you did an awesome job of showing and describing what goes into the process. Did you allow the elite to gas out for ten minutes before putting it into the oven or did you go directly in? Thank you again!
@XRING4 жыл бұрын
Depending on the desired sheen. For more gloss go into the oven immediately. For a matte finish let flash for 15 mins. You can also modify the sheen by adjusting the ratio but Cerakote does recommend 18:1 for Elite series.
@dlewis46472 жыл бұрын
Thanks for the video. What filter material are you using in your booth?
@highway9ca6934 жыл бұрын
That is a crazy cool shop. Is that your garage, lol
@loginavoidence123 жыл бұрын
it's always good to have an inline desiccant filter also to remove latent moisture from the product spray. very inexpensive, and noticable results sometimes (especially if using a cheap small compressor)
@snakeman483 жыл бұрын
Ray, nice video on the process. Definitely not in your basement. Looks more like MTK's
@TheSaulJohn3 жыл бұрын
Do you have to dump out the degreaser after every use from the dipping station?
@TomColontonio4 жыл бұрын
I love to Cerakote! Lol where can I access that Cerakote program for ratios you used in excel?
@XRING4 жыл бұрын
If you aren’t a Certified Cerakote applicator ,no but you can find an app in the apple store that works the same way.
@extramile33824 жыл бұрын
Getting new knowledge on "real" cerakoting process. Thanks X-Ring. Great video as always. Btw, just curious do you have any asian blood in the family tree?
@mark35144 жыл бұрын
Really enjoying your videos, my neighbors here are just boring. What is in your mix for degreasing? I’m using straight acetone and really want to change that. What else is the simple green spiked with? Or is it a secret family recipe? Thanks
@lonz734 жыл бұрын
That looks great! No more shiny barrel, lol
@brettmathews31914 жыл бұрын
nice video. great set up you have. 2 tips, you don't have to zero the scale. just add the catalyst until you get the proper total. And don't tip your gun when you get to the bottom if the stroke. tiny things, but. used to mix paint, and paint cars, if you angle the gun, the paint applies slightly different. could be a problem with touchy colors. not trying to not pick, just passing on experience
@XRING4 жыл бұрын
I appreciate it Brett! I am NOT a painter but it was fun doing the project to my barrel. Thanks for the information and thanks for watching.
@thomaspeplinski66184 жыл бұрын
Good to the last drop is Maxwell House.
@XRING4 жыл бұрын
That’s right! It’s “put Folgers in your cup”!
@lostandfound35884 жыл бұрын
I want to see how this product holds up to a meltdown or with hard use like chucking your rifle in the back of a pickup or something like that
@willebiggz4 жыл бұрын
how come you skipped the gas out step also why did you choose the 20:1 ratio.. 18 : 1 is the standard for E series
@michaelcardin34674 ай бұрын
After all done with paint do you recommend a clear coat also to help protect like flat clear cerakote?
@a.gunguy10544 жыл бұрын
New name.... Earl Shive...... nice job...
@XRING4 жыл бұрын
LOL! I remember those commercials, and Peaches
@MRIsomewhaereguy4 жыл бұрын
I'm wondering if when you blow off the aluminum oxide, does the air need to go through a filter or a straight compressor connection is OK? I'm also pretty sure an in-line oiler like auto and wood shops have are a bad idea.
@XRING4 жыл бұрын
The system that I was using was clean air through a commercial filter system. I am not a painter but was taught by guys that really know their stuff and this is how they said it should be done. That’s all I know. Thanks for the question and for watching the channel.
@surfsnow666 Жыл бұрын
What’s the container you used to clean the barrel, I like it’s simplicity
@anthonyramirez84022 жыл бұрын
Brother, what would be the result if you paint the fire clipper or compensator without sanding or removing your bluish?
@fordman325083 жыл бұрын
The oven is worth more than all of that guy at Branson Cerakote. A trick I leaned with taping off areas? Wrap the tape sticky side out so it doesn't stick to the part.
@matthewcordova3594 жыл бұрын
That is awesome to see it done. Not related to this video in particular I was wondering if anyone seen/shot the Howa APC in 6.5 or have an opinion on it at all?
@XRING4 жыл бұрын
Unfortunately, I have not. I haven’t had much luck with Howa rifles.
@matthewcordova3594 жыл бұрын
Thanks for the response. I am looking at getting into entry level long range shooting now so shopping around and seen there sub MOA guarantees with in my budget so was curious
@07liftedAV4 жыл бұрын
@@matthewcordova359 depending on your budget, Ruger makes awsome precision rifles. I have one in .223 and it is an absolute tack driver at 60 yards. I'm talking rounds through existing holes accuracy. I have heard a lot of good things of the other calibers they have it in such as, 6.5 creedmore. .308. Prices here in Canada are obviously higher that ANYWHERE ELSE in the world so I paid 1800 plus tax, but it is an awsome gun. Looking forward to stretching g it out to further distances soon.
@beyondxtream40564 жыл бұрын
Uhhhhh Pre-cleaning oil residues I get . . . . but why decreasing with aceton, before blasting????
@Sert-ELOfficial19896 ай бұрын
How long does the Elite Series of Cerakote bake and at what degrees, thanks ☺️
@D-RAM5563 жыл бұрын
Is that cerakote program available on their site? Thanks
@jeffyoung20894 жыл бұрын
👍👍
@chriscrusader54124 жыл бұрын
All about friends in high places! Looks nice man! How much you charge?
@XRING4 жыл бұрын
Thanks Chris. I do not do this for hire unfortunately.
@CtrlAltRetreat4 жыл бұрын
@@XRING Is there a good shop you'd suggest to do this sort of work right?
@grrreg65203 жыл бұрын
Hi ! What kind of plug is this please ? What material... ? Silicone ? Thanks
@Woodsguy4 жыл бұрын
how thick is the Ceracoat layer? I use DuraCoat instead and the thickness of it is only .001 so i never have issues with screws not fitting. I had Ceracoated guns in the shop where i had to chase the threads to mount scope bases, I never have that issue with Duracoat.
@XRING4 жыл бұрын
Great question Smithers Gunworks. It think it all has to do with the applicator. Cerakote measures .001 as well so the thickness should be the same as Duracoat.
@Cristopher19764 жыл бұрын
I like when people question my friend who does this and Hydrographics about his price then either do it themselves or pay someone else to do it. Within weeks most are back and ask him to fix it. Once he explains why he now will charge an additional fee to do the work they always agree. Though he doesnt charge them that fee in the end the look they give as they bow their head is funny.
@XRING4 жыл бұрын
I know exactly what you mean Chris. It does take time, power and the know how to do these jobs correctly.
@davidbartch89174 жыл бұрын
No need for flash off before the bake ?
@jzaden104 жыл бұрын
You have a nice paint booth and setup with the sandblasting and painting. I'm guessing you paint your own vehicles and other stuff etc. Great video. I havent painted my rifles yet but I have painted and blasted industrial and vehicles, well not blasting vehicles more like sanding well you understand.
@Jerry-Parker4 жыл бұрын
Nice Job ! 🎨 If you wanted to camo it , would you do multi colors at the same time or in layers ??? Would it be one bake time or multi bakes ??? Can it be applied with a sponge ?... LOL😂
@XRING4 жыл бұрын
Good question Jerry. Many people do Camo incorrectly. Dried Cerakote does not adhere well to itself. It’s all about timing and applying stencils before the base colors and those above have fully cured. If done incorrectly the top layers can flake prematurely.
@jimtanner85164 жыл бұрын
If I m not mistaking you where at NIC shop Oregon.
@tacmedic52114 жыл бұрын
What model oven was that?
@93jcoop3 жыл бұрын
@X-RING do you have any info on that degreasing tank?
@BULLBRONCO3 жыл бұрын
Cerakote sells it on tier website.
@ReubenOaks844 жыл бұрын
Is this your setup or did you have to use someone else's with the ovens and sand blaster? Either way it's an awesome setup.
@sanmiguel21974 жыл бұрын
That was awesome step by step video cerakote. Can you do my Glocks and rifles? I’ll pay! Thanks and stay well!
@XRING4 жыл бұрын
Thanks San Miguel. Unfortunately, I cannot but I thank you for watching. Have a great week sir!
@Tonyblogan19823 жыл бұрын
Doesn't mind getting simple green on hand putting barrel in, lifts up tray to take barrel out so you don't get simple green on your hands... why didn't you use that process to put the barrel in lol. Either way, just wanted to poke fun, great video!
@long-range-eliminator2 жыл бұрын
So you dont gas the barrel before painting ?
@racex4284 жыл бұрын
I have to wait till the wife isn't home to use her oven....wish I had that oven....
@Sert-ELOfficial19894 ай бұрын
While I'm doing the currying, the plugs bounce every time, and so do you.
@johnshoureas16294 жыл бұрын
Are you in the business of doing Cerakote ? Also, what would it cost for the same work that you did ?
@XRING4 жыл бұрын
No sir, I am not. Just taught by a friend who really knows what he is doing. I’m guessing about 80