CERAMIC COATINGS - HOW MANY LAYERS IS TOO MANY? Top DIY's Tested! - UPDATE 13 - 10 MONTHS

The odd man out continues... two updates left. Thoughts?
SETUP: • CERAMIC COATINGS - HOW...
RINSE: • CERAMIC COATINGS - HOW...
1 WEEK: • CERAMIC COATINGS - HOW...
2 WEEKS: • CERAMIC COATINGS - HOW... (this video)
3 MONTHS: • CERAMIC COATINGS - HOW...
Products used in this video:
1) Soft99 Fusso (PTFE old version - IF it does not look like what you see in the video, it is NOT the PTFE version and is NOT the same!) amzn.to/3v5mVzQ
2) NuFinish Graphene (link is for Non-graphene since the graphene version is not available on amazon yet, but performs equally as well) amzn.to/39d99Td
3) Sonax Ceramic Spray Coating amzn.to/3L7RFFH
4) Avalon King avalonking.com/
5) Meguiars Hybrid Paint Coating amzn.to/3ETg3Jf
6) Nano Bond/Nano Age 9h amzn.to/3kmirPf
7) Griots 3 in 1 Ceramic Si02 Spray (Don't buy it if it isn't around $20 USD - there is a seller that is price gouging!) amzn.to/3EG2wo7
SUPPORT THE CHANNEL:
Patreon.com/ScottHD
Paypal.me/ScottHDYT
Venmo.com/ScottHDYT
USED IN THE PREP/SETUP OF THE HOOD:
- Bauer (Harbor Freight) Polisher: www.harborfreight.com/75-amp-...
- RUPES 5" backing plate amzn.to/3Dq5I6O
- 3M Adhesive Remover amzn.to/3uyiZ9c
- Plastic Razor Blades amzn.to/3uKgdho
- Shine Supply "Chop Top" compound: shinesupply.com/products/chop...
- UROFIBER Microfiber cutting pads: amzn.to/3DoVrYA
- Oberk STEP 2 Finishing Polish: amzn.to/3k2iNub
- RUPES Fine/DA finishing pads: amzn.to/3uCjcbw
- 70% ISOPROPYL alcohol (cut 50%) for prep wipe: amzn.to/36yuIwH
- 3M Tape: amzn.to/3qMVN5U
- Prolock cords: amzn.to/3LpGnMZ
- Tornador blower: amzn.to/3wRzfov
- Scangrip light: amzn.to/3JWh0lx
Equipment:
DJI MAVIC Air2S Drone w/smart controller: amzn.to/36ZjmBG
DJI Pocket 2 creator bundle: amzn.to/3iNiz9C
INFRATECH IR Curing Lamp: amzn.to/3aMj5Rv
FLIR Thermal Camera: amzn.to/2Ps1oPE
Laser Temp Gun: amzn.to/32SiLfR
Sure MV7 Mic: amzn.to/3eztv8d
FLIR/Extech UV-A/B Meter: amzn.to/3dIDIyw
Carbon Fiber Tripod: amzn.to/30ZTIas
Sony AX53 4K Camera: amzn.to/3fPZ4uQ
#ScottHD #CeramicCoatings #LongevityTest

[@muchachogrande2019]

I know this video is a test and what I'm about to say isn't necessarily relevant because this video is in line with a lot of the content that you usually focus on, but I just wanted to say I've really enjoyed and appreciated you doing some different style videos lately like using the cheap Walmart polisher or talking about borophene coatings for example.

[@David-Godin]

I am so glad that you do these tests. I still believe that the only difference is the time it takes for you prep the surface for 7 coatings and the time for you too put all the stickers and boxes for 30 coatings. Try N-914 8 to 1 instead of IPA and see if that fixes it. Great video, keep it up. You are my favorite KZbin channel

[@TheArtOfDetailingOC]

I use griots 3-1 mainly because of your tests. its been outstanding with my maintenance clients.

[@ModleskyAutoDetailing]

I started using Griots 3 in 1 based off tests you did in the past and have always gotten similar results here in PA. I used it on my own vehicle in September and I noticed it was still beading very well during a recent rain storm.

[@ericmann7945]

Thanks again for more great longevity tests

[@GainingDespair]

I've noticed similar things in the past when re-applying my spray ceramic.

[@vinzaputra]

would love to see this kind of test on other product

[@DavidVYoutube]

would be great to see a leather ceramic coating comparison. Dye transfer is super annoying with lighter colored seats

[@Viddough]

The oddball is griot 3in1 ,it generally lasts 1 yr+

[@notsodelusional]

Scott, have you thought about switching to Reset for future tests? There is definitely something odd going on here, especially since in your other test, Griot's is still hanging in there after the 10 month mark.

[@MarkusKleis]

One variable most overlook is the condition of the paint itself. As paint ages in the real world it degrades from UV, contact and chemical damage. This will play a much bigger role in messing with bonding properties for all kinds of products (waxes, sealants and coatings) much more than people tend to realize. This is a great example of why SAMPLE SIZE and variable control are so important before jumping to conclusions about anything.

[@barrycook8116]

@Scott: Garry Dean claims to have the highest SIO2 in a product called EMC Boost. This is a product I think you need to test.

[@dc5723]

2 coats of Griot's 3 in 1 for the sides. The roof and hood gets 1 coat of Soft99 Fuso Coat (non-PTFE version).

[@CJCarsPhotography]

Avalon King is the best one ? (Sorry I don't speak good english)

[@LeroyMustang]

I would love to see the initial coefficient of friction tested.

[@SHODUUP]

Strange about griots. In your other test it’s still holding on past 10 months?

[@eecc17]

interested on your thoughts on apex details BC1 coating and if it could be added into future head to head tests!

[@skeletronmw]

still think this test is borked. Try a diff hood. Griots should last a lot longer, so should some of the others.

[@orlandos_detail]

Which one would u recommend for mohs or uk 3.0

[@snail415]

It’s in my will to ensure someone throws a tin of Fusso in my casket. Right next to the cigars.