Thank you. Some very good info not found elsewhere. Much appreciated.👍
@GumperVanLier Жыл бұрын
I think that was a good move to manually activate your approach as one of your waypoints that you deleted was the initial fixed approach. You were very busy with that short flight using the jet. I enjoyed it.
@ariev9482 Жыл бұрын
I just watched the whole video. It,s exactly what I was looking for. Thanks for the work and the calm explanation. I wil definitely use your tips.
@IFRSKIES Жыл бұрын
Thanks
@AndrewSanderson15211 ай бұрын
Kudos for landing outside the aircraft and in the TDZ.
@helicopterovirtual-msfs62548 ай бұрын
Sensacional.
@juicekrewe8490 Жыл бұрын
Flaps 2 and Full Flaps should have been already down when you dropped the landing gear
@IFRSKIES Жыл бұрын
Thanks for the tip on the flaps Juice.
@tonazzz4 ай бұрын
hi! does your msfs longitude do the NAV 1 activated ILS frequency morse beeps beeps? Mine doesn't
@IFRSKIES4 ай бұрын
The Nav1 audio should beep when you turn it on and get within range of the N1 frequency. If it does not it might be a glitch in the software which MSFS will get around to fixing on updates.
@tonazzz4 ай бұрын
@@IFRSKIES ok. do your longitude beeps beeps or not?
@IFRSKIES4 ай бұрын
Yes, it does send out the morse code signal when in range of the ILS frequency coming from the airport runway. You have to turn on DME1 to pick up the signal. You can find it by pressing Ctrl and 6 on keyboard to get the screen to the left of pilot's seat. Select Audio Radios and scroll down to find DME1 and turn it on. You will then receive the signal when you are in range.
@IFRSKIES4 ай бұрын
Yes, it does send out the morse code signal when in range of the ILS frequency coming from the airport runway. You have to turn on DME1 to pick up the signal. You can find it by pressing Ctrl and 6 on keyboard to get the screen to the left of pilot's seat. Select Audio Radios and scroll down to find DME1 and turn it on. You will then receive the signal when you are in range.
@tonazzz4 ай бұрын
@@IFRSKIES DME1 together with NAV1 button u mean? i don't get you sorry.