CFMOTO UFORCE 1000 | Review after owning 6 months | + Trail Ride footage | 2020 Side by Side

[@waynehalverson9898]

Hi just got my u -force 600 last week I just love and the price was right .

[@jimsweeney25]

I also live in NH and hopefully, my U Force 1000 will be delivered this week. I was ready to buy a Honda Pioneer Deluxe 700 till I found the CF Moto brand. I couldn't find a bad review during my research and I paid $3,000 less for the U Force for a larger machine and a lot more equipment. There is also a CF Moto dealer near me compared to the Honda dealer that was over and hour away. It was a no brainer.

[@SimplyNewEngland]

I think you will absolutely enjoy the uforce!!

[@Vector38-b9t]

I subscribed just because you seem genuine and honest I'm getting a uforce 1000 nice vid bro.

[@SimplyNewEngland]

Thank You! , I truly appreciate the sub! When you get that machine just make sure the first few weeks you take it easy during break in.. After thst! Ride it like you stole it! lol 😆 Super fun machine and so far other than the battery dieing on me, which could happen on any brand, its been fantastic!!! :)

[@Vector38-b9t]

@@SimplyNewEngland will do

[@SimplyNewEngland]

Love it!! :)

[@philipphilip2174]

I see CF Moto as supporting the Chinese Industry. I am attracted to some of their vehicles and the price. However being loyal to the USA is more important to me.

[@sposatoas258]

I'm in Maine . Ever ride out here?

[@SimplyNewEngland]

not yet, but I want to!! :)

[@sposatoas258]

@@SimplyNewEngland I'm looking at a 2020 my self. Anything to look out for? Has 600 miles . I'm just nervous it being the first year of the uforce

[@MrThegabbster]

Get the frount and back windows

[@SimplyNewEngland]

I want to get the front folding window. I do like when it is open. The folding one would be ideal for me. :) Especially in the winter and for noise control when recording video :) I subbed to your channel.

[@MrThegabbster]

@@SimplyNewEngland I got the frount folding windshield and the back window it’s so warm with the heated seats. And just with door nets that my dog Tama. Can’t take the heat. That’s plowing two feet of snow at -20 c just the Rizeing Heat from both seats. With the front window down and back window at plowing speed 5 mph it’s toasty warm . I show that window in my vid ftfm garage Fix That Friggin Machine

[@Idahoshepherds83440]

I absolutely love my 22 CF Moto 1000 over land and U force. Such a great machine at a killer price point. CF Moto makes the replacement parts for the BIG 4. So they know what the best parts are. They have been in business since the 80s . I did my research and know who they are and what they are made of. Spread the word on these machines

[@SimplyNewEngland]

Absolutely a great machine!! The prices are great! Thanks for checking out the video.

[@timwilson6407]

Thinking of picking up u-force 1000. I have a 2019 XC 800 & it has been a great machine & you cannot beat the price of the CF moto especially for what you get. What state in New England are you from? I live in southwestern N.H.

[@SimplyNewEngland]

I'm also in NH :)

[@MrThegabbster]

Hi it’s Douglas aka The Gabbster. FTFM garage just FYI. When you have the windows. Front and back, the sound from drive train which is very loud on my 2021 cf moto u force 1000. But normal for side buy sides. The sounds are Amplified. I’ve filmed with just sell phone. But once I get 1000 views or more I hope to purchase a go pro or proper camera.

[@SimplyNewEngland]

Good to know! THX for the info!

[@SimplyNewEngland]

Yeah the GOPRO is a game changer. Just ordered the case mod, the light and the reversible screen to help make things easier, the phone app to see what you are recording when not looking at the camera is hit or miss with connection and stay power. Excited for it to arrive! Good discount with the GO PRO Program.

[@davevibert7983]

Wondering how much wider a side by side is compared to a quad , 🤔 can you go on trails where a quad fits ?

[@SimplyNewEngland]

Dave, most quads are 50 inches wide (4 ft) and under wide which is the average width o allowance of most recreational trails, at least here in NH. The uforce 1000 being 63.5 inches wide does not mean it can't go on trails, it just means that you would need to check the rules/laws for the trails you ride on if they have width restrictions. So you may find that you are prohibited from some. Hope that helps. And if you really want the flexibility of all trails, you can't get a cfmoto zforce trail.model. 50 inches wide! :) zforce 800 trails is awesome! best of both worlds for a sidexside

[@paigeattheboatramp]

Congratulations on 100 subscribers!! ~Paige

[@SimplyNewEngland]

Thank you so much!! I will be watching you hit 100 soon!!!

[@youcantube1769]

Nice Uforce, I enjoy riding me Cfmoto in the winter!

[@SimplyNewEngland]

Yes it is a great machine. I will end up with another one for sure. I traded it in for the zforce 950 as I wanted more power but I intend on picking up another once I get my addition onto my storage area.

[@Geddyfleaharris]

I just purchased a UF 1000 for our cottage. It is outfitted with tracks and a blade for winter. I live in Manitoba, Canada. First side by side I have ever owned and so far liking it a lot! Safe riding.

[@SimplyNewEngland]

HI Jack, Fist off thank you for the subscribe and the comment. Appreciate it. I hear you guys up in Canada have some AMAZING trails! We have great ones here , problem is so many closed to us.. I am glad you like your 1000! I am enjoying mine quite a bit. Hang in there with me on the channel, you will see a mix of Jeep, MOTO and outdoor videos come in. I am working on a new moto video but it has been cold here and hard to film when that cold. The cold makes me rush and I want to be sure to bring quality videos. And for me, this is also my first side by side as well. I have 4 wheeled since I was kid and have wanted one of these bad boys. I am now hooked and look forward to this spring and getting much deeper into the New Hampshire trails and sharing that experience on the Tube! lol You also stay safe. Drop a comment any time. I do my best to respond to everyone who shows interest. Hope the mood in Canada is better than the mood in the US right now. Cheers!!!

[@michaellacoste2207]

Hey I'm from manitoba too how is you're cf moto holding up I'm looking at buy one currently but having a hard time finding Long term reviews

[@Geddyfleaharris]

@michaellacoste2207 hi Michael. So far it is working great keeping in mind I don't use it for hardcore trail riding. But nothing has broken and everything works great. The 2 main downfalls I would say are the tranny is a bit clunky for shifting, not a deal breaker, and there is not much feathering of the throttle. It is pretty jumpy.

[@tonymic988]

Great stuff. Have you ever thought about installing rear seats.

[@SimplyNewEngland]

If i did that i would have to lose the dump bucket. I use it so often. They do make 4 seaters, not sure if CFMOTO does in the US. Possibly in other countries.. And Tony!!! Thank you so much for the Sub! Its been overly cold here in NH and i have not been able to make an updated trail ride vide. Stick with me, I plan on doing one very soon! I do have a few comedy videos posted and of course jeep and travel stuff. I truly value every sub i get! Again , thank you!

[@SimplyNewEngland]

Hope you got a chance to see the other CF moto vids i have posted. I think 3 in total as of today.

[@dezfan]

Just finding long term experiences on the UForce 1000 is valuable. CF Moto has been on my radar for nearly 3 years and I’m leaning in the direction of picking one up. 👍🏼

[@SimplyNewEngland]

​@@dezfan First and foremost, Thank you for the sub and helping the channel grow! Super appreciative! And yes the moto 1000 is treating me very good! I just completed filming a new video yesterday with new multiple angles. I have a local ice fishing video with my son that i just completed. I will post that one this week, next week the complete edit of the Uforce trail ride will be done!! Stay tuned for that. Hit me up any time with UForce questions, Always happy to answer. I am a happy CFMOTO owner here in the good old USof A!! :) Again, thank you for the sub and the comment!

[@dezfan]

@@SimplyNewEngland thank you for the welcome. Looking forward to seeing the upcoming videos. I’m sure I’ll go back and watch your other videos as well. Just greening as much research and information as I possibly can to make an informed buying decision.👍🏼

[@MrThegabbster]

Plowing snow

[@versyschris]

Not sure why I get this one year after you posted.LoL. I am a subscriber. Anyway, thanks for doing it and how are you doing a year later now? Still liking it?

[@SimplyNewEngland]

lol! Honestly its been alot of work. But I'm sticking with it!!! Glad to hear from you!!

[@versyschris]

@@SimplyNewEngland sorry to hear that. Care to elaborate what went wrong or what didn't work so well?

[@SimplyNewEngland]

@@versyschris OH you mean the machine! lol I thought you were asking about the channel! lol had to read your response a few times. I traded the uforce in for the z950. The uforce was absolutely amazing! I just wanted more of a sport and power type machine. I do and will always recommend the uforce series if that is the style of machine one needs to use. I had 0 problems except for a faulty battery. And part of that issue was the cold and I didn't have it on a trickle charger. Hope that helps you. UFORCE is str9ng and the dump bed is awesome if you have land to work :)

[@versyschris]

@@SimplyNewEngland thanks for the clarification. Yep, that helps. I looked at the Z950 myself, but I have issues with the seating in the sport type machines. Mind you, the Z950 is the best of them with regards to the seating position for me. Polaris RZR forget it, Can-Am Maverick so so....

[@SimplyNewEngland]

@@versyschris hands down the seating I'm the uforce is definitely more comfortable! lol I can't deny it!!

[@lyndseymarieburke1834]

Hi I just bought a CF Moto Z800xc and love it! I have always had one of the big three others and I’m retired so my income is very limited now. I would love to see a group of people here in New England to ride with. I’m from the Conway NH area, it would sure be nice to have others close by.

[@SimplyNewEngland]

definitely subscribe to the channel and come join us on the face book cfmoto everything group. Quite a few of us from NH and we do put rides together to meet up. here is the link. come join. facebook.com/groups/498785887951496/?ref=share_group_link

[@Backwoodsballistics296]

So u have owned this machine for 2 years ... what problems has it had ?? And how many miles or hours do u have on it now currently???? A Friend of mine is looking and I would like to know how reliable are they ???

[@SimplyNewEngland]

yes, and so far, not a single issue. Not one at all. And it has just a bit over 1500 miles on it.

[@edmiksis5660]

I really lime your videos. I took your advice I just bought a u force 1000 camo. Front and back windshield. Did you change your oil yet and is it easy to access

[@SimplyNewEngland]

No way!! That is awesome! A fun machine and for you the added bonus of the Front and back windshield. I have not needed to change the oil yet.. Not enough miles to have to do so. However. I hear it is very easy to do and on top of that.. Plenty of videos here on youtube that show exactly how to do it. Very excited for you, if you should happen to post any videos on you tube be sure to drop me a message so i can subscribe :) Now you can go "Live The Adventure!!" Congrats!!!!!!

[@edmiksis5660]

@@SimplyNewEngland me and my brother will enjoy riding here in the great state of Pennsylvania. My last side by side was totaled by someone I lent it to and it was not insured I learned a lesson fron that.

[@SimplyNewEngland]

@@edmiksis5660 oh yeah big toys I never lend out! I hear you there!!! dang!!

[@ronshelly7758]

@@SimplyNewEngland guy

[@jakcd6randommusicvideos427]

Great video ! I love my 2020 Uforce 800 , when riding on the trails I’m noticing a lot more CFMOTO machines .

[@SimplyNewEngland]

Thank You! As soon as this weather gets better and its not 10 degrees out I will be making some more.

[@MrThegabbster]

Did your winch bend down after lowing with 72 inch plow

[@SimplyNewEngland]

I do not have a plow yet. I have been relying on my trusty snow blower! LOL A plow is on my list. I do know the front end is beefy and you can adjust the shlock tension, i do not foresee it being an issue.

[@SimplyNewEngland]

And!! Thx for the sub! I have a new video coming out this weekend part 2 to the break down. Its me chaining out the battery and gibing a lesson on how to do it for those who are not mechanical. Location of the under screws is a pain in the arse! LOL However its not just going to be about the battery replacement, its sort of a follow up and part two of the break down in the woods and a continuation of the back story. :) Hope you like it when it comes out.

[@Ckfurypk]

Love the vid, sending good vibes from North Mississippi!

[@SimplyNewEngland]

thank you so much! Please feel free to tell me what you would like to see in future videos any time. SUBS COME FIRST!!!! :)

[@martinanne2006]

How is the ride over rocky trails?

[@SimplyNewEngland]

It's not that bad. Could it use a bit more suspension for the very rocky areas, yes. I'm saying that.. Not even state is filled with granite boulders. lol Snow wise! it ran and drove beyond my expectations in the packed snow.

[@zacharyblair1253]

I just bought a uforce 1000 a few months back and i love it, great machine with all the power you need. im in central mass right on the NH border.

[@SimplyNewEngland]

Excellent! I hope to put a group together this spring/early summer for a meet up ride south west of Concord NH over on the Hopkinton-Everett trail system! Thank you for the comment and the like! :)

[@SimplyNewEngland]

The power is a lot! More than i ever need on a trail! LOL. At least so far! Would like to get up to Berlin NH and open her (bertha) up on a long wide logging trail! I got mine going 60 down the road. HAHA, that is fast without a windshield on one of these bad Larry's. HAHA.

[@chadmassingill9888]

Does the uforce 1000 have a engine brake?

[@SimplyNewEngland]

it definitely shifts down when foot is off the gas. remember it is belt driven so you have slow down friction from that as well.

[@chadmassingill9888]

@@SimplyNewEngland thanks

[@tonyfarr3277]

Is the ground clearance adequate?

[@SimplyNewEngland]

It has very good ground clearance. If you plan on driving over granite boulders like we do here in NH, you may want to consider tire size upgrade... Big recommendation for any of these units, install rock sliders. Helps protect that bottom edge. I am ordering mine in the next few weeks. Precaution because I am getting a bit deeper out into the woods of NH with mine. They are not a large cost and very easy to install. I am not mechanical at all. LOL IF i can do it anyone can! HAHA.

[@tonyfarr3277]

@@SimplyNewEngland awesome!!! Mine will be primarily for farm use so it sounds like it will be perfect!!

[@SimplyNewEngland]

@@tonyfarr3277 Be sure to join the UFORCE CF MOTO thread on FB when you get it if you have not already.

[@codyschmidtmann3992]

We put on 30-in tires on our uforce 1000. Also put rock sliders on. We did upgrade with a clutch kit very easy to do at home.

[@codyschmidtmann3992]

Live in upstate New York. We have a enclosed cab and heat. Very good machine

[@buckyspowersports299]

i got 5 cfmotos in the last year 3 this month love them

[@SimplyNewEngland]

Give yourself a plug. Where is your shop located so if any one wants to check out yiur inventory. web site etc :)

[@SimplyNewEngland]

Also ! Thx for the sub!!! :) You guys keep helping me grow! :)

[@markyb6995]

You rock man 10 More subscribers to go and you got it

[@SimplyNewEngland]

Thank you all for supporting the channel!!!

[@happyhunter09]

i own a uforce to an love it i call her my silverbullet

[@SimplyNewEngland]

Thanks for the sub , i also just subscribed back to check out your content. The uforce does have some major guts! It is good to have other uforce users to subscribe,. Thank you Ray!! The silver bullet! i like that. Mine is named Big Bertha! LOL She is a beast! HAHA.

[@jack.brooks]

Seriously considering a Uforce 1000, buy at a shade over 6'4" and about 300lbs I worry about cab space. What is it like? I have not been able to find a dealer that has one so I can sit in it. Have put a 100% refundable deposit on one, but wondering if I should keep looking. Any help would be greatly appreciated! Thanks!

[@SimplyNewEngland]

hmmm 6'4. weight no issue at all. 6'4. head room should not be an issue. leg room' thst may be a hassle. I find that when banging around fast I bang my knees at times. I am 6ft exactly. thst extra 4 inches could be a problem. I woild recommend you sit in one for sure. I think you will be ok. but I'm not 6'4 so not 100% on this one. great question though! I would go join the uforce group on FB and start asking some like minded folks who own them. there is no way you woild be the only 6'4 person. it is a bench seat and the seat can forward and backwards. .

[@jack.brooks]

@@SimplyNewEngland Thanks for the speedy reply! Much appreciated. Yeah my buddy has a Kubota (not sure the model) and it's a tight fit for the legs and my size 12s... :-)

[@SimplyNewEngland]

no problem. I try to stay on top of messages. wait till you see my cf moto video fpr next week I will post. it's a really good. some excellent footage and editing I put into this up coming one.

[@raymondmedina8129]

Do they come with heated seats as well? Have been reading they do but no one has said anything about it in videos

[@SimplyNewEngland]

The 2020 did not, i do believe some older models did. The 2020 sold in the US does not. Thx for the question and the view, let me know if you have other questions. Thx Raymond :)

[@codyschmidtmann3992]

The Canada version does.

[@davidlima8204]

Hi I have a uforce 800, it’s noisey. How quiet is this 1000. Thanks

[@ronrose2620]

JUST GOT MY 2021 UFORCE 1000 AND WAS WONDERING ARE YOU IN LOW GEAR OR HIGH GEAR IN THIS VID?

[@SimplyNewEngland]

H all the way.. Have not even needed L yet :) Beast has power!!!

[@ronrose2620]

@@SimplyNewEngland I was told that if your under 30 MPR that you should be in low?

[@SimplyNewEngland]

@@ronrose2620 Low is for getting out tough spots. Low & Slow

[@crystalavery2570]

Do you have any issues with ground clearance in the rough trails?

[@SimplyNewEngland]

Here in NH we have a lot of small granite boulders, So i would say yes at times i do. What i would suggest is to get a pair of bolt on rock sliders. They are next on my list. You can get them (nerf brand for about 199.00. You can pay more depending on what you want to get look wise, but that is the least expensive brand I know of that work. Overall regular trail riding with out these small boulders in the way.. No problems at all. Also something a larger set of tires could also assist with. :) Hope that helped.. Have a Simply New England Day! lol

[@marcelloushearns9946]

What mount is that for the cellphone?

[@SimplyNewEngland]

amzn.to/36ibgU4

[@rugby3874]

Please buy American made machine

[@SimplyNewEngland]

Rugby, I have quite a few things that are American made for sure. And i agree. However, CFMOTO does have an American Factory with American workers! :) You will notice my Jeep is 100% pure American made! :) The CFMoto allowed me to try my hand in the sidexside nation at a price I could afford.

[@Rachk1229]

Love it!

[@SimplyNewEngland]

So glad! Thank You for the view and the like!!

[@brendafrey7761]

Would you recommend this uforce for farm and forest work? Or more as a hobby vehicle?

[@SimplyNewEngland]

I recommend the UFORCE 1000 for both! excellent around the farm, the dump bucket, the add-ons available for it. it has excellent power, the winch is fantastic, even has a Bluetooth remote so you can stand away from the vehicle, you can get plow attached, mini dump bucket, pull trailers, on and on. it's a great all around machine! I want anotet one. I love my zforce, but I miss the work capability of the uforce. 100% recommend. my one issue. I don't like the touchy throttle, but! you can add a switch to that, and I found out after the fact that will take care of it. other than that! fantastic machine!! :) hope you will subscribe if you have not allready:) thx for the question!

[@aaronmcfee506]

Good day, Ive got a 2019 with 2500 klms on it and so far great. Nothing loose at all. Did you do something to your seats?? They look like their tilted back further than mine . Thanks Aaron

[@SimplyNewEngland]

No I did not, Mine is a 2020 and what you see other than the speaker bar behind my head is all stock. I am however able to pull my driver seat forward or back. Not sure if you can do same on yours? Do let me know.. Thx for the sub and the comment! Responding is my favorite part of all this! And riding around! HAHA.

[@aaronmcfee506]

@@SimplyNewEngland yes sir mine can move back and forth

[@SimplyNewEngland]

@@aaronmcfee506 You have a a 2019, any issues on your end with the Moto?

[@aaronmcfee506]

@@SimplyNewEngland No so far so good, 1700 miles on it and nothing yet

[@SimplyNewEngland]

@@aaronmcfee506 I love hearing that!!!!

[@m.w.h.9253]

I keep seeing more c.f. moto videos and atv's/sxs out there. They look good and the price is nice.

[@SimplyNewEngland]

For sure, The entire topic is trending. I have another video coming out next week. As soon as the weather warms up I hope to get the drone out and do some really eye catching stuff with the 1000 and some other Moto owners! :) They cant even keep them in stock in the US dealerships. Get em while the price is hot I say, LOL Thank you M.H. For the sub and the comment! :)

[@doc559]

🏆🏆🏆👍🙏 You're doing good. Subscriptions will follow 👌⭐🤗 Thank you for sharing.

[@SimplyNewEngland]

Thank You! Also i added your channel in my faves list for others to see, Us "NewTubers" need to stick together. :) LOL

[@clinthardin1020]

So I am researching UTV/ side by sides. I would like a model with a bench seat so that my little girl can ride between my wife and I. I also want one with some bed space. Primary use will be light trail, around a campground and some street use. I would likely be able to pull the my daughter on a sled. I am not going to be doing any “mudding”, rough trails or hot rodding. I have been doing lots of research. What made you choose a CFMoto? Would you buy another one is cost was not an issue? Any words of wisdom before going to look at machines; CFM and brands? Any feedback welcome.

[@SimplyNewEngland]

OK so as far as room for three, absolutely, 3 adults fit in the front, and seatbelts for all. the dump bed is nitrogen gas spring assist. Super easy to open and put back up when full of dirt or empty. Plenty of space and tie downs built in to dump bin, that is useful! Can be a bit touchy on the throttle till you get used to it. My shifter would get a little choked up for the first 100 miles and then that went away, break in issue. But there is a fix for it, other KZbin videos will show you that. test drive it of course and if you notice at the dealer ship make stink about it then and there and they will take care of it. not all do it. Factory thing i guess. Gas cap on mine broke because i muscled the lock, but that was on me. Warranty covered and i had a new one in less than a week. warranty wise 2 years on the 2020 model! Front and rear tow receiver hitches standard. lots of extras you don't get with other brands. price point of 2021 11,999!!! wow! some dealers can wave origin fee, you have to ask, i got mine out the door at MSRP. I love the LED lights on it. lots of aftermarket upgrades also available for it. 79HP vtwin engine! yeah! it halls ass! 2021 comes with one year warranty, bummer because 2020 came with 2 year.. All machines can have issues. remember, its all in how you ride it. If you want to rock crawl and beat the crap out of it, its going to break as will the other brands. In my opinion, Most of the guys that complain about the CANAM , CFMOT or Yamaha breaking, they ride very hard. If you want to ride like an animal, than get the CFMOTO zforce if sticking with CFMOTO, but that is only a two seater. Hope this helps.. Disclaimer: Simply New England comments, thoughts and feelings of CFMOTO are my own and I am in no way affiliated or employed by CFMOTO.

[@clinthardin1020]

@@SimplyNewEngland thanks for the info. Like the videos. 👍

[@SimplyNewEngland]

@@clinthardin1020 No problem, I asked for comments so i am glad to get them and respond :)

[@haywoodjablome44]

I moved from Canada to SE Asia 19 years ago. Seeing that white shit on the ground reaffirms I made the right decision.

[@SimplyNewEngland]

hahahah!!! I hear ya! it's a good thing inhale these machines to make it fun!! otherwise I'd be looking for a warm spot myself! hahaa

[@drdoolittle5724]

Hi from Advanced Old England, good to see you enjoying yourself in the woods but don't know how long it will last! Your steed comes from a country where the average wage according to Google is nearly $13000, that's why so many 'freebies'! Also, i use a boring old Kubota 3 cylinder diesel RTV which will carry 1000lb all day and every day, spares in every country and more importantly, is worth more now than i paid for it! My only small point is, you get what you pay for! Enjoy and thanks for showing us the New World, as my forebears described it, just before they died of malnutrition/lead poisoning/Trump etc

[@SimplyNewEngland]

Not to sure what to say to that. So far so good. Kubota is great equipment I can say that!

[@TheDbrewer31]

@@SimplyNewEngland wow. No reason to have to say anything to this jerk. He's downing you and making himself look better than, well pretty much everyone else. I appreciate your opinion on your experience with the CF Moto side x side. Pay no attention to these type of people.

[@SimplyNewEngland]

@@TheDbrewer31 yeah some people are just miserable and need to bring everyone else down with them.

[@brianbulson5083]

Are you running stock clutching ?

[@SimplyNewEngland]

Hi Brian, Yes, I am stock clutch 100%