CFMOTO ZForce Z950 UForce Rear Differential

[@fernandorivera7155]

Thank You very much for posting the video. So far, your video has saved me about $2,000. I took my CFmotto to a repair shop, and they asked for $2,300 to replace the rear differential and drive shaft. According to the service guy, the gear that connects the drive shaft to the differential was damaged. After watching your video I found a new differential in eBay for about $420 so I told them to leave the differential out and that I would attempt to fix it. It turned out that the bolt that connects the flange to the differential was broke. I will try to remove it, and if successful the cost of parts will be for the bolt and the drive shaft. Worst case would be $420 plus the drive shaft and the bolt.🙏

[@R.N.GPerformance]

Heck yes. These dealers are rip offs.

[@Gokywildcats11]

Shout to this guy. Very knowledgeable. Keep up the good work

[@R.N.GPerformance]

Thank you 🙏

[@kyledufault1952]

Shout out to main street garage helping our man out

[@EdwardMurray06]

Good job man. Good to see you got that new dif finally.

[@R.N.GPerformance]

Thank you 🙏 me too drivin it to work tomorrow yeeyee

[@thatoneguy2756]

@@R.N.GPerformance the original 800 had the deflector bolt on the diff. 2015 or 16 I think. But the first one i drove and considered buying had it,and it was an early model.

[@R.N.GPerformance]

@@thatoneguy2756 yes. But those were a completely different differential they changed them in 2018 and then problems began lol.

[@wallacespangler8766]

Awesome! Great fix. Found I have 3 degenerative disc in my cervical spine and need surgery to correct in October so if I would have gotten the 800 it would have been sitting until I heal. Maybe the 2022 will have that diff and a few other upgrades. Have fun man!

[@R.N.GPerformance]

Thank you. Heal fast brother. You will get one some day stuff sucks right now.

[@wallacespangler8766]

@RedNeck Garage thanks man!

[@R.N.GPerformance]

@@wallacespangler8766 you’re welcome

[@wallacespangler8766]

@RedNeck Garage my brother in law just offered me his “30” miles only 2019 570 RZR for $10,000 with a roof and full doors installed and a new winch. Tempting but the $12,000 CFMOTO trail is an 800cc with all that and brand new. Polaris has some negatives

[@R.N.GPerformance]

Yeah i wouldnt do that. I would definitely get the CFMOTO

[@AnthonSa]

I recently bought a 2023 950 g2 trail (in Canada).... will definitely take a look at it now to see to see if it has the deflector screw.

[@R.N.GPerformance]

The new ones do for sure

[@AnthonSa]

@R.N.GPerformance on an unrelated note, (you are probably familiar with). This machine has a slight "clunk" when shifting into reverse after driving forward and re applying throttle, and vis versa. Does not do it from a stand still if stopped while kept in high or low range. Almost sounds like secondary clutch slap (similar to what would happen on a snowmobile). Just never experience a noise like that on any other ATV.

[@viprgaming641]

Nice Steve glad to see you got the dif and got it in. I sure do hope it holds up well for you! Now next project is to make me a set of that fancy dual exhaust! LOL. Looks pretty simple but then you make everything look easy. Nice video though!

[@R.N.GPerformance]

🙏 you do like that exhaust 😝 thank you 🙏

[@viprgaming641]

@@R.N.GPerformance Yes it looks awesome and sounds like it too

[@R.N.GPerformance]

@@viprgaming641 thank you 🙏

[@SimplyNewEngland]

Nice Job! Excellent info you provided to us all. :)

[@R.N.GPerformance]

Thank you 🙏

[@thomascornelius510]

You need to sit on a milk crate or something bro. Ore you will be sorry when you are my age. I did tracker trailer repair when I was younger and the guy I worked with always told me that. Now my knees are a mess. Awesome video my man. I hope I never have to repeat it. Lol

[@R.N.GPerformance]

Thank you. I hope so too. Im already screwed i was in a very bad car accident and my back is screwed i am supposed to be on disability but something about working and keeping on moving buddy i cant stop. If i stop for a day or so i get in allot of pain and can’t move. It sucks but i do it.

[@JeffAllram]

Will the diff come out the back? I don’t really want to pull the muffler.

[@kodihull3820]

Hell yea Main Street cycle is the best I got a lot of parts and aftermarket stuff form them great Service and fast shipping

[@R.N.GPerformance]

Right on brother. They are fast and great service.

[@kodihull3820]

@@R.N.GPerformance when I check out I said you sent me I hope that will help you a little

[@R.N.GPerformance]

Yes sir thank you they always help me out.

[@tonymic988]

Great Video Steve.

[@R.N.GPerformance]

Thank you 🙏

[@JeffAllram]

Does the way you popped out the axle with the pry bar hurt the slinger shield?

[@R.N.GPerformance]

No but will need bent back. Easy gravy.

[@djlewis1568]

I have a 23 zforce 950 ho ex is my rear diff the q860 ?

[@jjclayton25]

I want that exhaust lol 🤙🏻🔥😎😎

[@fernandorivera7155]

For a DIY, approximately how long will it take to remove the rear differential on a 2019 CfMoto Zforce 800?

[@R.N.GPerformance]

About 30 mins if that.

[@cardinalbaycustoms2702]

Are the 2018/2019 rear diffs different then 2021s. My 950 needs rear diff. I found them on ebay, but there for the early years. They have the deflection screw also. 40000 last Part number

[@R.N.GPerformance]

They are the same diff. Only difference was the deflection bolt. If it has it. Full send. I put a 950 diff in my 800 works great.

[@cardinalbaycustoms2702]

40000 and the 40002 diffs both have that bolt when I look at the pictures. I'm shopping on ebay. I blew my diff up when I rugged it in low gear. Went boom. Combo 32s. Intake/exhaust / Dyno tuned. Spit the pinion sideways...

[@chriskyle5659]

Nice video, subscribed!

[@R.N.GPerformance]

Thank you 🙏

[@eltorito9986]

Can I get a link to where you bought that steering wheel? Looks great...

[@R.N.GPerformance]

Yes sir. No adapter needed bolts right on. amzn.to/3iisqEF

[@R.N.GPerformance]

Here is the how to video kzbin.info/www/bejne/i6SnYWOcftprp5o

[@eltorito9986]

Ok perfect, appreciate it..

[@DirtTrailAdventures]

How’s it ride without the sway? Been thinking about removing mine

[@R.N.GPerformance]

Rides great. Mine has been disconnected for a while. Im just now taking it all the way off lol.

[@AB_thingsDFW]

Good video my friend.

[@R.N.GPerformance]

Thank you 🙏

[@thomascornelius510]

Would that update on the diff be on my z force 950 ?

[@R.N.GPerformance]

If your ZForce has that little bolt I showed then yes.

[@drmarkintexas-400]

🏆🏆🏆👍🇺🇲🙏 Thank you for sharing

[@R.N.GPerformance]

Yw

[@larry97016]

Unless they are Harbor freight jack stands. lol

[@R.N.GPerformance]

😂

[@joshuaslate3719]

Is it best to buy from CF Moto on diffs, or can i go cheaper?

[@R.N.GPerformance]

You can go cheaper. On eBay or something. CFMOTO is over priced.

[@joshuaslate3719]

@@R.N.GPerformance Thank you brother.

[@edwinwaern7018]

Just pull the axle straight out. That way you don't risk damaging the diff or the metal flange on the axle

[@R.N.GPerformance]

Sometimes they don’t come straight out. Didn’t damage anything. I do this for a living.

[@hondagang5966]

Is your diff go or did you just change it for a video

[@R.N.GPerformance]

I wanted the exercise lol

[@edclements5112]

There is no sneaking up on anyone with cf brake squeal or your exhaust.

[@R.N.GPerformance]

😂 he can hear me leaving my driveway im 2 blocks away haha.