Making A Rolling Ring: A Silversmithing Tutorial

  Рет қаралды 8,887

Chad’s Silversmithing

Chad’s Silversmithing

Күн бұрын

This video tutorial shows how to create an easy and fun design for a sterling silver ring with three simple bands interlocked with each other. This style works with 5 or 7 bands as well, but you need to use narrower wire if you do that many. The only materials I used were: 8 gauge sterling half-round wire, and hard silver solder. This is a fun and easy beginner project that sells well. I enjoy sharing my knowledge with others, as I've taught people for most of my life. This hobby turned into a fun side gig for me for years while I taught public school. I love suggestions and hearing about others' experiences. What is your favorite project? What kind of tutorials would you find useful?
Please feel free to share this video, and I would love to have you subscribe! Make sure to ring the bell for updates when new videos are uploaded.
I just passed 1000 subscribers! Thank you all for making that happen.
If you’d like to contribute to my efforts, or express appreciation, you can at the link below.
www.buymeacoff...
Thank you so much for all the kind words and suggestions!
Here is my website where you can purchase my jewelry, and can inquire about classes if you are in the Northern Colorado area:
www.cvpsilver.com
Thanks,
Chad Parker
Join My Patreon!
www.patreon.co...
Tier Information:
Silver Supporters
$5/month
This is a much appreciated way for you to support me while gaining access to some exclusive ad free content.
What's included
Support The Artist
Ad-free content
Silver Super Supporters
$10/month
You receive all benefits from the first tier as well as a shout-out on my channel. Here you will also get some behind-the-scenes peeks, and voting power concerning some upcoming content.
What's included
Support The Artist
Ad-free content
Patron shout-out
Behind the Scenes Content
Voting power-to determine projects and influence content.
Exclusive video tutorials
Silver Stars
$25/month
This tier provides all the benefits of the 1st and 2nd tier. In addition, you get access to a monthly live stream, a Q & A session, and discounts on jewelry.
What's included
Support The Artist
Ad-free content
Patron shout-out
Behind the Scenes Content
Commission pieces mutually agreed upon(delivered by mail)
Livestreams
Live Q&As
15% off jewelry purchases
Voting power-to determine projects and influence content.
Exclusive video tutorials
Silver Superstars
$150/month
This level of membership provides all the benefits of the previous 3 tiers. In addition, it includes live-streamed interactive instruction in a small group format twice per month for 8 hours per month total. This tier is limited to 4 people for now.
What's included
Support The Artist
Private community
Ad-free content
Patron shout-out
Behind the Scenes Content
Livestreams
Live Q&As
Live Virtual Small Group Instruction
Voting power-to determine projects and influence content.
Exclusive video tutorials
Commission pieces mutually agreed upon(delivered by mail)
#silver
Make A Rolling Ring!
#jewelrymaking #silversmithing #jewelry #jewelryhandmade #jewelrytutorial #jewelrydesign #jewellery #jewellerydesign #handmade #maker #crafts #jewelryartist #bespoke #artist

Пікірлер: 84
@sonnyn.7967
@sonnyn.7967 9 ай бұрын
Just finished my first one! Thanks for the tutorial :)
@chadssilversmithing
@chadssilversmithing 9 ай бұрын
You're welcome Sonny! I'm glad it was useful:)
@mawi1172
@mawi1172 2 жыл бұрын
😂🤣😂🤣😂 pickle time? Is that an underground joke? 🤩🤣🤣🤣 You're so funny!
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Gotta have a little silliness to break up watching my hands:)
@jakkibaker1818
@jakkibaker1818 10 ай бұрын
Thank you very easy way to make these rings another to do ring 🤣😊 you make very good videos easy to follow 👍🏻
@chadssilversmithing
@chadssilversmithing 10 ай бұрын
Thanks Jakki! Glad you like the video:)
@gamersroost
@gamersroost 7 ай бұрын
1K subs 1 year ago. 11K a year later. 6.6K views. Maths say everyone loves this video.
@erintodd8636
@erintodd8636 Ай бұрын
Very good demo, thank you for sharing!
@chadssilversmithing
@chadssilversmithing Ай бұрын
Thanks Erin! Glad you enjoyed it:)
@jeannettesalazar6442
@jeannettesalazar6442 5 ай бұрын
❤ the ring😊
@chadssilversmithing
@chadssilversmithing 5 ай бұрын
Thanks Jeannette!
@sarinakhalili2053
@sarinakhalili2053 3 ай бұрын
Very helpful, thanks a lot
@chadssilversmithing
@chadssilversmithing 3 ай бұрын
Hello Sarina! You are very welcome:)
@BoundsofLight
@BoundsofLight 4 ай бұрын
Thankyou!
@chadssilversmithing
@chadssilversmithing 4 ай бұрын
You're welcome!
@kristibbradshaw
@kristibbradshaw 6 ай бұрын
I have always wanted these. Now I can make them. Thank you.
@chadssilversmithing
@chadssilversmithing 6 ай бұрын
You're welcome Kristi!
@karenmoore2287
@karenmoore2287 2 жыл бұрын
Chad....as always, a GREAT video!! Thank you so much for keeping them coming!! Congrats on over 1000 subscribers!!
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thank you Karen. I’m excited to have reached that goal:). Next stop 100,000, lol. Thank you for all your nice comments!
@thatcrystallady_donna
@thatcrystallady_donna 10 ай бұрын
I have one of these, it's one of my favorites 😂
@chadssilversmithing
@chadssilversmithing 10 ай бұрын
They seem pretty popular:)
@johngpreston1784
@johngpreston1784 Жыл бұрын
Nice and easy to try. Thanks for your help.
@chadssilversmithing
@chadssilversmithing Жыл бұрын
You’re welcome John!
@CherylAnn2222
@CherylAnn2222 2 жыл бұрын
Thanks Chad! I always wondered how those were made! I think Im going to make one for a birthday gift for my cousin!
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Awesome! Tell me how it goes Ms.C2222. Thanks you for your nice comments!
@andreamarkovic6314
@andreamarkovic6314 2 жыл бұрын
How fun, thanks Chad!
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thanks Andrea! You’ve made these, haven’t you?
@mawi1172
@mawi1172 2 жыл бұрын
What a cute idea for a ring!
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thanks! Wish I could take credit for it, but they are good sellers:)
@laurapusceddu8151
@laurapusceddu8151 Жыл бұрын
this video was so useful thank yous so much!
@chadssilversmithing
@chadssilversmithing Жыл бұрын
You’re welcome Laura! I’m really glad you found it useful. Thanks for watching:)
@tiaevans6512
@tiaevans6512 Жыл бұрын
Great video
@chadssilversmithing
@chadssilversmithing Жыл бұрын
Thanks Tia!
@suethompson6399
@suethompson6399 2 жыл бұрын
Thanks! your work is really nice. I have learned so much.
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thank you so much Sue. I’m glad these are useful for you!
@flyingcheff
@flyingcheff 2 жыл бұрын
I’m referring my beginner students to your channel , I like how you do what you’re doing. And, yay, I have some 8g half round, I’m IN for some fun in this one.
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thanks Flying Chef! That’s above and beyond:). Where do you teach?
@flyingcheff
@flyingcheff 2 жыл бұрын
@Chad’s Silversmithing I have one on one students in my own studio; I'm in Maui. I refused to teach until I was sure I wasn't the blind leading the blind - which is a plague on KZbin. I had 8 years before I started ANY teaching. I only teach what I have real experience in, not what I'm trying to learn.
@christinabeanqueen
@christinabeanqueen 2 жыл бұрын
Great video! Thank you for sharing your method!
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thanks Cheekylittlefox! You are totally welcome. I’m glad you liked it. I love your username:)
@tahomyjo
@tahomyjo 2 жыл бұрын
I adore this! Great Job Chad!
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thanks Tammy! The other day you asked about a way to contribute. I set up Buy Me a Coffee, and put a link next to the website link on my KZbin channel page. Here’s the link too: www.buymeacoffee.com/cvpark7 Thanks for wanting to contribute!
@jasonphillips5227
@jasonphillips5227 2 жыл бұрын
Great vid…!
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thanks Jason. These kind of comments make it worth the time and effort! I appreciate you watching:)
@puresas
@puresas 2 жыл бұрын
Congratulations on the milestone 1000 sub. glad I'm one really enjoy your lessons
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thanks Chris! It’s viewers nice comments like yours that kept me motivated. Thanks so much. Next stop: 100,000 lol.
@hannahananab
@hannahananab Жыл бұрын
This was great! I've always wanted to try making one of these, so thank you!
@chadssilversmithing
@chadssilversmithing Жыл бұрын
Thanks Hannah! You are very welcome!
@patredden4557
@patredden4557 2 жыл бұрын
Thanks for another great video, so much good information. Congratulations on getting over 1000 subscribers.
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thanks Pat! It’s nice to know people are finding these helpful. I wish KZbin had been a thing when I was first learning:). Thank you for the nice comment!
@WizardKitty723
@WizardKitty723 9 ай бұрын
❤️
@chadssilversmithing
@chadssilversmithing 9 ай бұрын
Thanks WizardKitty!
@dianeharlow3928
@dianeharlow3928 Жыл бұрын
I enjoyed your video and will try this. Could you tell us what cutters you use, please? It looked effortless to cut 8g wire. Thank you!
@chadssilversmithing
@chadssilversmithing Жыл бұрын
Hello Diane. The orange handled wire cutters are Xuron cutters. They cut flat on one side and leave a beveled cut on the other. They do cut pretty well through some pretty thick wire, but I occasionally break a pair by trying to cut extra thick stock, doh!
@maryleemartz3722
@maryleemartz3722 11 ай бұрын
Love it! May I ask how you figure your pricing for you items? I make jewelry from vintage silverwarer and struggle with my pricing.
@chadssilversmithing
@chadssilversmithing 11 ай бұрын
Hello Mary:). I would start by calculating what sort of hourly wage you would pay yourself. It takes time, education, and practice to develop these skills, so you should be compensated for your expertise. I wouldn't do less than $20 per hour + the cost of your materials. Too many artists underprice their pieces at first. If you price things too cheap, customers assume the piece is poor quality. You should also consider what you think you can realistically get for something. I may have to sit on an epic piece I made for a while in order to get the price it should bring. It's smart to have pieces at multiple price points as well, as not everyone can just drop $500 on an impulse purchase. Many can do a $50 price point easily. Hope this helps!
@loribranson-h2e
@loribranson-h2e 10 ай бұрын
Hello. That was awesome!! Thank you. Question: how would you put them together if one. As a bezel? How would you size that?
@chadssilversmithing
@chadssilversmithing 10 ай бұрын
Thanks! I think you meant if one has a bezel? Probably make the same way, and then cut the width of the bezel out of one so I could solder it in.
@loribranson-h2e
@loribranson-h2e 10 ай бұрын
Tried making ring today with three different size gauges. Made them all size 9. I must have done some wrong cause did not go on like you showed. Not sure if you have to go same size gauges.
@furkanbattal4914
@furkanbattal4914 Жыл бұрын
hey! I am a beginner and wanna do one of these but 5 bands, I wanna know if the sizing would be the same, still 3 size higher? and what should be the gauge if it is 5 bands? thanks in advance! great work🌱
@chadssilversmithing
@chadssilversmithing Жыл бұрын
Thanks Furkan! It should be about 5 I think. Been a while since I made one with five though. One thing though, definitely want to keep the wire gauge smaller than what I showed in this video. Maybe try 12 gauge half round and see how that goes:)
@ChucksMagic
@ChucksMagic 2 жыл бұрын
Great video and congrats on 1000 subscribers! Can you tell me what brand spray solder you reccomend? Thanks!
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thanks Chuck! I use My-T-Flux from Rio Grande.
@ChucksMagic
@ChucksMagic 2 жыл бұрын
@@chadssilversmithing Well paint me stupid! That's what I use, but didn't think about spraying it on, I've always used a paint brush.
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
@@ChucksMagic I think most people are taught to paint it on. The guy who taught me just happened to spray it on instead, and I adopted his style.
@ChucksMagic
@ChucksMagic 2 жыл бұрын
@@chadssilversmithing I'll give it a try, thanks! keep up the good work, I'm sure it won't be long before you have so many subscribers you won't have time to answer all the questions, so I appreceate your time!
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
@@ChucksMagic No problem at all. It’s nice to have people to interact with regarding a topic I love.
@Lisa-yj8dt
@Lisa-yj8dt 2 жыл бұрын
Congrats on over 1000 subs! When will you get a "thanks" button? Happy Thanksgiving to you and your family 🍂🥧🦃🍁
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Thanks Lisa! If you are asking about a way to help support my channel, I have added a link at the top right side of my KZbin channel page to contribute. It’s called Buy Me a Coffee and allows you to contribute directly to me. I’m also putting a link in each description. Thanks, and happy Thanksgiving to you as well!
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Here’s the link. www.buymeacoffee.com/cvpark7
@peggyhopf4801
@peggyhopf4801 8 ай бұрын
Can you use round wire instead of half round?
@chadssilversmithing
@chadssilversmithing 8 ай бұрын
You can Peggy, but it doesn't lay as nicely.
@marieking5486
@marieking5486 2 жыл бұрын
What size silver do you recommend for more than three bands???
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Hello Marie! Thanks for question. I would go with 12 gauge or smaller half-round because larger sizes start to become cumbersome because of how thick the overlapping rings become. Hope this helps!
@annewhite9502
@annewhite9502 2 жыл бұрын
What are you spray before you put on your solder?
@chadssilversmithing
@chadssilversmithing 2 жыл бұрын
Hello Anne! That is a liquid flux called My-T-Flux that preps the metal for soldering. Thanks for watching:)
@jawwad4020
@jawwad4020 11 ай бұрын
Hi, could you please share reliable sources for good quality silver/gold wires? I'm looking to make a ring for my girlfriend. Thanks.
@chadssilversmithing
@chadssilversmithing 11 ай бұрын
Where are you located Jawwad?
@jawwad4020
@jawwad4020 11 ай бұрын
@@chadssilversmithing thanks for the swift reply - I'm in NYC .
@chadssilversmithing
@chadssilversmithing 11 ай бұрын
@@jawwad4020 I get most of my raw materials from Rio Grande out of New Mexico. They are dependable with reasonable prices and quick delivery.
@jawwad4020
@jawwad4020 11 ай бұрын
@@chadssilversmithing Got it thanks. I really appreciate you making these videos, so that amateurs like me can get started.
@michelebonutti4507
@michelebonutti4507 6 ай бұрын
I like your videos, but I really believe that would be jewellers should be taught the proper way to measure for a ring shank length, to ensure a completely accurate size - especially if making a ring for someone. Calculation is inside diameter from the ring sizer, plus the wire thickness x 3.14. 🙂
@chadssilversmithing
@chadssilversmithing 6 ай бұрын
Good information for people Michele! Thank you.
@sharonforbes5090
@sharonforbes5090 5 ай бұрын
if there is ne thing for sure, there is no proper way to do things in jewellery making if it works for you. If you are going to do an apprenticeship you will be shown all the “proper ways but then you can do your own thing.
Make Some Stackable Rings: A Silversmithing Tip
29:41
Chad’s Silversmithing
Рет қаралды 7 М.
Silversmithing: Making A Ring With Cutouts
24:22
Chad’s Silversmithing
Рет қаралды 17 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 26 МЛН
Правильный подход к детям
00:18
Beatrise
Рет қаралды 9 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 26 МЛН
Silversmithing:  Mastering Pick Soldering
14:24
Chad’s Silversmithing
Рет қаралды 13 М.
Casting Ingots and Making Wire with a Rolling Mill - scrap copper pipe
16:02
3 Unique Pattern Rings: A Silversmithing Tip
27:27
Chad’s Silversmithing
Рет қаралды 6 М.
Celtic jewelry making tutorials - handmade Celtic ring
12:24
How to make Mountain Range Rings
23:23
GomeowCreations
Рет қаралды 221 М.
How I Make One of my Best Selling Handmade Jewellery Necklaces
17:44
3 Ways to Set Square Cabochons: A Silversmithing Tip
42:05
Chad’s Silversmithing
Рет қаралды 10 М.