Chimney flashing install | Part 2

[@michaelbeck7799]

We have been engineers and general construction managers for 40 years. We have seen every way to flash incorrectly and they all fail. However, here we have genuine cut-in step flashing! This is the only way to correctly flash a chimney or trim. Very enjoyable to watch flashing done correctly. This should be a training film sent to all roofers in America who would nail their aluminum flashing on the brick and caulk with any tubes of caulk that will fail within a year or two. A genuine thank you for posting this very well done effort.

[@chadvaillancourt]

Than you for your kindness.

[@dumbluck6180]

I just posted above, but have to say I totally agree with you. He did such a good job and the video could literally be a training film.

[@user-sk9hl7si7l]

lol wut,every chimney done with solar seal caulk and proper double hem bent towards chimney will outlast shingles. engineer and manager means you havent done 300 chimneys like i did with my own hands and theoretical knowledge is not always works in actual field work

[@jusnielful]

Would it work if you put the ice and weather shield right to the chimeny and then put roofing cement to cover it?

[@user-sk9hl7si7l]

@@jusnielful just cement along the perimeter can make it last a while,no need for ice water

[@rockfinancial2371]

I’m not a contractor or anything. I’m an accountant, and I found this to be highly satisfying to watch. Great work! It’s an art form that takes patience and dedication.

[@gordon8858]

Hi Chad, Thank you for the videos, you did an absolutely brilliant job, your attention to detail and narration was very well explained throughout. I am pretty sure there will be no problems with this job and your clients delighted with the finished job. I live in Yorkshire, England, and last year had a roof replacement, the roofer welded the Lead flashing as you described, and he also was very conscientious regarding his work ethic and the visual aspect of vertical lines etc. Well done once again. Gordon, Halifax, UK

[@chadvaillancourt]

Thank you for your kindness. I’m glad you enjoyed. You have a lot of great tradesmen in the UK.

[@vjmacintyre]

this is the BEST display and explanation of flashing I've seen. I never understood it well until now! Awesome!

[@Quetzachapin]

It’s sad to see people like you are hard to find that take pride in their work. Great workmanship and thanks for the video.

[@chadvaillancourt]

You’re truly kind. Thanks for the support!

[@Kumar_6791]

These are the two best videos I’ve seen on chimney flashing. 👍

[@AlphaRoofingPTYLTD]

Those coverage on the front corners are pure GOLD techniques man. Thank you!

[@dmech5135]

The reason why the previous repairs failed is because this requires a lot of work, skill, patience and pride in your work. Unfortunately, those qualities have been lost today. Great work!

[@wytas20]

Super clean install. Great 2 part video to learn from. I have a lead flashing repair to do and this taught me a lot. Pro tip: Once you the last ridge cap shingle is on and the silicone is wet. Rub 2 shingles or caps together over the silicone so the granules fall into the silicone so you don't see the nail heads. Another option is to put silicone/tar/roofing cement all over the last ridge cap and wet set another one over the top of it so you don't have to worry about nail heads.

[@chadvaillancourt]

Thanks, I’m glad you learned something from this. Great idea with the granules. I know they sell containers of granules but I never thought to grab some from the shingles I had. Almost all roofers here don’t cover any exposed nails with anything anymore. Sad really.

[@jpcarpentry4199]

Smart, I'm doing this on my next roofing job!

[@genoatilio3017]

I have to say. This is the first time I have been impressed for a really long time. I Roof all day 7 days a week. I deal with idiots and their Ideas and opinions daily. But this right here is hands-down a legitimate idea and way to flash a chimney

[@genoatilio3017]

Beautiful work by the way.

[@chadvaillancourt]

Thank you

[@chrisfruhling7387]

Wow!! I do chimney work every day in Baltimore city Maryland. I love your technique. Although we don't use lead much. Mainly copper. And even aluminum. This is absolutely the correct way to do this!! I'm so tired of seeing caulk over everything! Then I have to grind it out and repair. I think this is an absolutely perfect video to show people the extents to make your chimney waterproof!!

[@chadvaillancourt]

Thanks! You’re totally right, people usually have no idea the time and effort that goes into a job.

[@bobbarker9986]

Great workmanship! I've been roofing for 45 years and haven't seen workmanship like this. Especially scribing the vertical lines to get a nice plumb look! Only one little nit pick, the nails in the shingle at the bottom left corner (1:02:22) are too close to the flashing and being that the flashing has a slight slant to it away from the fireplace the water is going to head toward those nails. Will it ever leak? Probably not, but after all that fantastic work it's the weakest point. I also like to leave about a 3/8" space between the edge of the shingle and the vertical bend in the shingle to allow a space for the water to run down. The water can still run under slightly but it helps with the water flow especially if the chimney is lower on the roof where there is more water accumulation. Thanks for the detailed workmanship. Nice to know that there are still quality workmanship being done!

[@chadvaillancourt]

Great catch with the nail! I’ll have to do better next time. Thank you for pointing it out and thanks for your comment. Very observant!

[@dumbluck6180]

What a nice job! It looks really good too. Good explanations on why you do each step. I do handyman work, and nearly every house I enter has botched work. It blows my mind how much bad work I see. In Part 1 you showed layer upon layer of messy repair attempts that failed. Those hack jobs are fine in an emergency like during a storm when you're just stemming the tide until you can do a proper repair. Very much admire your skill and methodical work. I'm originally from MA and your accent sounds familiar! My 70 year old house in OR has the original heavy galvanized steel step flashing. I re-roofed 27 years ago, and just lifted it up like you said. It could probably go another 20 years, but I'm going to replace it with lead the way you did.

[@chadvaillancourt]

Very kind comment, thanks for the support.

[@ColinThomas-qz8ox]

Beautiful job!I think we we should all appreciate your skill and the way you explain clearly all aspects of your craft.thank you for the education😍

[@bg147]

I live in hill billy USA. When the roofer talked to me about flashing the chimney following a derecho, he said most people just have it packed wiith roofing cement, but I opted to have it flashed by their sub contractor for $250. The roofer did the lower flashing. The flashing guy used metal, not lead. He didn't step flash but just has it running at angle parallel to the roof line. I had to have him come out two more times to fix it from leaking. He said he cut a groove before installing it. I guess he did. My chimney is well down from the ridge in the middle of the roof. At the time, I didn't know how to build a saddle or cricket and the house didn't have one. My guess is the chimney sat on the ridge back when it was built in 1923, but the deadliest tornado to hit the USA decimated this town in 1925, and it appears they changed the orientation of the ridge from front to back to side to side resulting in the poor placement. Anyway, long story. You do great work.

[@EasyLiving8]

Sir, EXCELLENT JOB!!! GREAT VIDEO!! There is no homeowner that would be able to do what You did, trust me on that.

[@chadvaillancourt]

Thank you!

[@Southcoast_Ironcladhustler]

Your two part video is so well done I was able to do the work on my own house. Local supply store thought I was on drugs when I asked for sheet lead. Thank you for this two part video. Neighbors think it looks awsome.

[@chadvaillancourt]

I love hearing this stuff! Glad you got it done.

[@blakem9666]

The amount of time and care taken for this job was amazing. I'm redoing my whole roof and wanted to flash my chimney in a similar way but finding lead flashing and the sheer cost of copper just doesn't make sense unfortunately. Still hard to find some of these specialized materials here in the Midwest without paying an arm and a leg.

[@chadvaillancourt]

Thanks! Lead is available at all masonry outlets and hardware stores here, even Lowes and Home Depot have it. It costs about $140-150 per roll now, although I have one supplier that will sell for $110 per roll.

[@markharmon4963]

If you know of another system that works then it would be interesting to hear about it. Otherwise how can you afford not to do it this way? I am not trying to be a jerk.

[@leanderarnold4443]

I’ve done hundreds of tear downs and through flashings over 30 years and not one has ever leaked again! Guaranteed each one …..Your counter flashing is a solid job….

[@chadvaillancourt]

Thank you!

[@Zakflix]

wow, after watching your videos on this chimney helps me realize all of what I thought I knew about very basic roofing and chimney 101, ..is nothing what I thought it was. I don't do that type of work but am needing chimney and dormer leak repair and am tired of band-aid odd job work repair that never works.. and my roof is dangerous to get on

[@williamcope2652]

We’re having problems with a smaller chimney that used to be for a oil burn furnace but now simply acts as a stack for the vent and exhaust for the gas forced air furnace. The roof shingles were replaced two years ago and now we’re getting leaking in the basement that comes down the chimney sides. I had to laugh at your comment when you said that roofers and chimney guys don’t do each other’s jobs because my roofer won’t touch it with a 10 foot pole so I’m gonna have to hire a professional like you to do mine And I’ve got a place in mind. Thank you for showing us how the real pros do it. Good luck, live long and prosper.!

[@chadvaillancourt]

Yeah, it’s a tough thing. Your roofer likely put enough silicone to make it not leak for a couple years, now his work is showing through. Thank you!

[@AnRoc621]

I need to find someone like you in my area of CT. That cares about the work they do and does a good job.

[@master_Blaster91]

We use lead plugs to keep the lead in before siliconing little strips of lead rolled up and pressed into the joint so that it's tight and the lead doesn't move 👍👍 but really like how you do it as I haven't seen many people using lead over your way it's great to see

[@StripedBass617]

This is the quality craftsmanship I try to achieve on a daily basis. I'm a mason for a chimney company just up 495 and there always rushing me 😆.. I actually stumbled on your channel because I'm a self taught and I sometimes use KZbin sharpen my skills . I also have the same thoughts on caulking those joints 👍 I use a geocel caulking myself.

[@chadvaillancourt]

I’m glad to hear it! KZbin is a great resource no matter the skill level. Everyone has a different way and lots can be learned if people are willing to share. I used the geocel proflex for years but I had to stop because of the cardboard tube. It’s a good product.

[@michaelj.k.9408]

Do you think silicone fails more often than well set mortar over the long run?

[@williamdyckman9704]

The best comprehensive flashing video out there !!

[@chadvaillancourt]

Thank you!

[@KPutubing]

Howdy from Sacramento! I watched the entire thing. Adding your knowledge and experience to my memory bank in case I ever have to hire out something like this. Thank you!

[@chadvaillancourt]

Great attitude! Thank you for the support.

[@darrenkoeppen6137]

Wow, it was amazing watching the expertise and passion in your work. Years ago I had to research how to do this properly so I could go after the roofers who did my house. They did my entire roof and left me two leaky chimneys. They ended up step flashing both which resolved the leaks...... but originally just cut and caulked a single piece of aluminum in.

[@chadvaillancourt]

Thank you.

[@jamescrast6351]

As a retired contractor of 42 years..I can tell you that Through The Roof Caulk is one of the best products for sealing most anything through the roof..It Bonds to almost any materials and it does not dry and shrink like traditional silicone and crack away or pull away from material..Its almost like an adhesive as well as expandable caulk..You are very thorough and looks great..

[@AlphaRoofingPTYLTD]

It's funny - I make jokes that I am just a dumb roofer but what we do is an art! Good vids bro - from Australia. 20 years in the field.

[@gregsidel3557]

😮 What a beautiful job you have done. You definitely are a master Craftsman. What you do very good. Thank you for the video. It's gonna help me when I go to do mine. If I could afford to have you come to my house. I would, but I can't so I really appreciate you showing me what to do. Very fine video thank you

[@mikereckert2705]

Chad, I have to say that I am very happy to see pride in craftsmanship! I hope you share your ability and attention to detail with someone so it's not lost. I'm watching these videos due to the fact that we have a newer roof ands it's leaking into the fireplace. I have a tarp over the cap to see if it's coming from there, but it's still coming in. Which i assume leaves the flashing, which looked a bit like this one in the beginning. Mine however is on an exterior wall and recessed into the roof with a 5-12 pitch. The chimney is 3 to 4 ft wide, and the ridge side is just flat to the back of the chimney. Shouldn't that have a gable built to the back of it, to divert the water away? It's probably 14' of water hitting on that side. You can see were the previous flashing was stepped down the sides, like you did the lead, and the caulking was just left, and the new flashing matches the slope and is caulked in. I don't suppose you are local to NC? Either way amazing work!

[@chadvaillancourt]

Anything over 30" wide; parallel with the ridge, really should have a cricket or something to help shed the water. Thanks for your kind words!

[@Kyle-ys3cv]

Great job. You want to “dog ear” (cut at a ~45 degree angle) the top corners of the shingles abutting the chimney so that any water traveling laterally off of/away from the chimney travels back toward/down the side of the chimney. Also, leave a little space at the angle change so water can flow freely along the side of the chimney.

[@Deep_Divers]

Great info! I wonder if the primers they make like perm a barrier or Henry would help with the membrane sticking. The big issue with those might be the time to set up. Your solution is probably faster and more efficient though. Keep up the good work Chad!

[@orkayen]

beautiful finish. Well thought-out work. Thanks for sharing. Curious, what is the reason for Lead sheet instead of aluminum?

[@dereksantavenere2172]

great video - thanks for not being just another video of a guy slapping some sealant on the chimney

[@randyhill2509]

Damn fine job!! Glade to see someone take pride in there work wish you could fix mine !

[@wetdog440]

Amazing work! My flashing has been a problem on and off for 20 years due to contractors who don't know what they are doing. My aluminum flashing is covered in 3 different types of caulk. I need to find someone to start over and do it right.

[@rondail5675]

Thanks Chad! I want to send this video to the roofer coming in 2 days. I don't know if he speaks english. Hope he is skilled and takes pride in his work.

[@SheenaRea]

You're quite the craftsman! What excellent work. I've had guys do my flashing and it's nothing like this... Both my chimneys leak, leak, leak... 😞

[@jjiacobucci]

WOW ! You are the man ! Very professional. You certainly do excellent work with the necessary knowledge. Learned so much. I’m not a roofer or flasher but our roof is leaking around the chimney. Our house is thirty years old and the roof needed replacement because of a hurricane. The leaking is bad whenever we have a heavy rain. Nothing was done to replace the flashing or to fix mortar and brick erosions. We have a lack of available roofers because hurricane Ian caused major damages to Florida. Question: how does one find a qualified professional to do the right work like you do ?

[@chadvaillancourt]

Thank you. You’re very kind. Honestly I wouldn’t know how to go about finding someone qualified. The trades are in a very sad state.

[@earlds111]

It's good to see someone properly flashing a chimney. I live in an old southern city and only about one in twenty are flashed properly, as most just have flashing glued to the chimney! Which will begin to leak immediately !

[@jasonmurray9291]

Chad, your craftsmanship is top notch. I recently had a roof replaced and 5 days later heavy snow and then windy rain. It turns out I now have water infiltration around my chimney which is what brought me to KZbin looking for an answer. The roofer claims the flashing is the responsibility of a mason even though the estimate included new step flashing (didn't happen). Their answer was they tucked the new lead under the old. I had a mason friend take a look at the chimney because the roofer claims the pointing is the issue. Mason and I went up on the roof and find lots of silicone around one corner of the chimney. The question I have for you is because my chimney is about a foot off the peak how are the flashing and shingles supposed to tie into each other? Basically there's an area where snow and water can sit and is sitting, the silicone is spongy and has a pool of water sitting in it. Granted I'm in New England and did have a heavy snow followed two days later by heavy winds and rain but water infiltration is not ideal period especially when it never happened with the old roof.

[@chadvaillancourt]

If it didn't leak prior to the new roof, then it's the roofers responsibility to fix. Water should not be ponding behind the chimney. That's on the roofer to get water to pitch out of that area.

[@bunnylou4993]

Polyurethane caulking works so well. Much better than silicone. Comes in many colors as well and smooths out like a dream with dawn dish soap and water.

[@chadvaillancourt]

Polyurethane caulking is subject to UV degradation and won’t last nearly as long in this environment 😕

[@bunnylou4993]

@@chadvaillancourt I get it. 5-10 years vs silicones 20 year life. Poly accepts paint well around brick mould and is excellent for sealing wide cracks in masonry. Easier tooling as well.

[@genecarden780]

NEVER use any soap for smoothing sealant. EVERY major manufacturer says to dry tool

[@genecarden780]

@@chadvaillancourt silicone does not bond to graces self adhered sheet goods. In fact we use it to make temporary dams on bituthene for water tests because it peels off easily and cleanly. I have installed polyurethane sealant on high rise buildings that is still in perfect condition after 30 years. But you have to use quality products.

[@genecarden780]

@@bunnylou4993 if you are only getting 5-10 years from polyurethane you are either installing it wrong or using cheap material. But since you said use soapy water it is clear you are installing it wrong. We routinely get 20-30 years from urethane.

[@lauraalmasan3930]

Outstanding job! That flashing looks professional

[@chadvaillancourt]

Thank you!

[@jackphilipsen452]

You should be proud of your work, looks great.

[@monkeyvideo1029]

Chad - Thanks for the great detailed videos on this flashing technique. On both of your repair videos the chimney is at the ridge. My chimney is at the bottom eave/gutter end. It is about 20" wide so no need for a cricket. But how would you flash the back side of a chimney like this? Would you get a 30"x30 square piece to go up the chimney and up the roof in one piece? I would be concerned any piece on a 4/12 pitch roof would tear trying to make the bend on the corner from the back to the side. Thanks for any advice.

[@chadvaillancourt]

The method is close to the same. I did show it on some of my other videos. Maybe check the shadow-box chimney I rebuilt, there should be something on that one to help you understand.

[@kleinbiker1]

Amazing videos. This is going to be sooo helpful when I go to do my chimney. Thank you! If you were in Ohio I’d hire you immediately.

[@chadvaillancourt]

Thanks! Good luck with your project!

[@rayoscroft3775]

Good workmanship mate lovely job well done

[@chadvaillancourt]

Thank you!

[@agentgringo1996]

i had my roof done and leaks within the chimney area (exactly older chimney like this one is). i know for a fact they didn't do this type of work with the flashing work they did. you're workmanship is amazing. i have to get someone do your type of work; i will show the next guy that i want exactly wha you did. What did you charge for this job? that way i know what to expect and not get ripped off again.

[@agentgringo1996]

seriously....when can you come do my roof/chimney? or any referrals in Southern NH?

[@chadvaillancourt]

What town are you in?

[@kieronsimpson777]

Brilliant, this has helped me thank you

[@josemena7644]

Great, detailed, and well explained Job!! Thank You 🙏🏼

[@petee6476]

NICE JOB!!! Love seeing the real pro's work...

[@chadvaillancourt]

Thanks!

[@slimjim340]

I have never done any Roofing however I have climbed around on a few in my younger days just for sport. Most impressive. I sat here and watched the whole video start to finish with absolute amazement at the detail and precision which you apply to this job. Do you always work alone?

[@chadvaillancourt]

Thank you. I do have help for the summer when my boys are out of school and I have a couple good friends that also have masonry businesses that help me when I need it. I don’t want the stress of employees anymore.

[@markhumphrey9402]

I really enjoy watching your videos, you are so gracious in sharing your knowledge and experience. You mentioned that you work in the Northeast, do you serve the Saratoga/Albany, NY area? The flashing around my chimney is in poor condition and I am wondering if I could hire you?

[@chadvaillancourt]

Thank you! I'm in NH, and that would definitely be too far for me. 😕

[@williamyediares7057]

Great informative video , I’ll be doing this in tuesday thanks a lot !

[@michaelj.k.9408]

Really well done. I work on a lot of chimneys undoing bad work.

[@chadvaillancourt]

Thanks! I prefer silicone in this application, it’s waterproof and flexible. Mortar cracks the first time the lead is lifted up to put shingles on especially if the roof is getting done in the following days.

[@kimchee94112]

I use torch down modified bitumen as flashing on my commercial building. Goes down super fast and 100% waterproof. This video shows a high class job but labor intensive.

[@myronww]

It looked great. How did it perform. How long has it been in place and did any water get in or did it stop the issue?

[@stulynn2005]

I'm still roofing after forty years and gotta say I'm impressed. You don't find that kind of work being done much anymore Copper is funner than lead though in my opinion

[@chadvaillancourt]

Very kind. Thank you!

[@danbiss87]

I've always rolled up a a tiny piece of lead to use as an anchor between mortar joint and lead to hold in place. Once you roll up the little peice of lead, use an awl to squish it in the joint. Then use a specific caulk to mimic the mortar.

[@chadvaillancourt]

I actually used a similar technique in this video with the lead pieces. I would never use caulking on a chimney though, just doesn’t last long enough or adhere good enough in my opinion.

[@danbiss87]

@@chadvaillancourt Yea I did see that after I posted.lol.. They make a special caulk that is for that purpose, I forget the name of it. Maybe dynaflex, not sure but it was specifically for mortar joints while also providing the necessary flexibility. Great work, I miss it, but then again....

[@Blueerer730]

This guy is unbelievable brilliant!!! No one where I live really cares, they lie get your money and go. I need a Chad

[@Tonycoelho123]

Best install I have seen. 👏🏻

[@chrislnflorida5192]

U don't cut the Verticle Cut to tuck your Flashing into the Brick? I've always laid my Shingles Over the Flashing, the Tar under the Ends to seal and stick. Nice Clean job 👍👍 I still not sure about Not Notching the Verticle ends of your Flashing. Blowing rain could get behind that area unless u Caulked under the Edge.

[@johnwaby4321]

What a brilliant job 👍👍👍👍👍

[@Believe_the_Bible]

You're a master. We need more conscientious workers like yourself. Care to share the cost of this job?

[@DM-fp8uw]

Do you have any suggestions for how to talk to a roofer who is redoing your chimney flashing to make sure they do it correctly. I can see them rolling their eyes and not wanting me to tell them how to do their job.

[@chadvaillancourt]

Just ask them to make sure the mortar is all sealed up underneath the new flashing. Definitely tell them you want ice and water shield around the chimney (I prefer the Grace brand) with a 3” lap onto the chimney. Let them know that you’re particular about the flashing and you want it to look good. Sometimes just mentioning things is enough to make someone slow down and do a better job.

[@DM-fp8uw]

@@chadvaillancourt thanks!!

[@retiredperson4054]

BEAUTIFUL WORK AGAIN!!!

[@csidun9087]

Excellent job… you don’t see flashing done correctly anymore. Thank you!

[@raycook4540]

Would it be OK to use 3 pieces of 8 inch lead to construct the front apron to cover up roofing cement stains? It would cover about 13 inches in the front and the sides would also be longer. Some pieces would exceed 20 inches. Is this too much to cover?

[@vjmacintyre]

I used some THROUGH THE ROOF! sealer (comes in a cube-shaped plastic jug on my brick after water was coming in through some degraded mortar joints.. now im into getting the top section rebuilt.. do you recommend the paint-on sealers at all, for new chimneys? i think you mentioned in the first part of this video to let it breathe

[@chadvaillancourt]

If it's new, I wouldn't. Just get a custom stainless cap to cover the entire thing.

[@vjmacintyre]

@@chadvaillancourt thank you!

[@BarryJanssen033]

When measure the lead, u can use ducktape to “ draw “ where to cut, greetz from Holland , Europe

[@marcuscicero9587]

hope the homeowner decides on an extended chimney cap soon

[@davidlynch5236]

Nice job and videos Chad! What do you recommend for patinating the lead flashing or do you even oil it. Just pulled out the lead on my chimney and the underside was solid white. The original flashing job was crap so I'm doing it right. Thank you!

[@chadvaillancourt]

Thanks! Unfortunately I can’t find patination oil here, I’ve been looking and asking for years. In Europe it’s a common product. I did hear linseed oil works, and someone said wd40 but I haven’t tried either yet.

[@davidlynch5236]

@@chadvaillancourt Thanks for the reply! It would add a nice touch to the lead work and perhaps catch on. The only thing close I found may be Tin-O-Lin from Calbar which is a tinners oil and may be similar. Have not contacted them yet. Its linseed oil based finish coat for lead/tin plated terne metal roofing. Something I'm not familiar with. They sell through Sherwin Williams in Biddeford per their website.

[@stephendennis7871]

Chad, I live I never the UK where we do a lot of lead work, my tip to you is get or make some wooden lead beating tools as the wood allows the lead to flow around the shape chosen, your rubber happier grips the lead so does not allow it to flow so easy....try them you will be amazed at the difference it makes to shaping the lead.

[@stephendennis7871]

Sorry for the spelling errors it's the predictive text

[@chadvaillancourt]

I've been thinking for a while that I would get online and buy some proper tools from Europe, I just haven't gotten around to it. I'm going to look right now.

[@stephendennis7871]

I look forward to you showing us using your new lead beating tools

[@WApnj]

Finally... a video that shows proper counterflashing. 👍🎉🎈👍

[@chadvaillancourt]

😊

[@johnnybarbar7435]

Just use a small propane torch with a soldering tip to make corners water tight. It melts at very low temp versus welding you mention with oxy acetylene torches.

[@chadvaillancourt]

The lead welders I've spoken with say that the small torch doesn't really work, so don't bother. I've tried with no success.

[@hugoramirez4740]

Simply.... nice job man

[@dawnmitchell8213]

I wish all tradesmen thought about the ones who will be working behind them in the future. Many do shoddy work and have no consideration for the ones who have to come in later and fix their horrendous work.

[@chadvaillancourt]

I couldn’t agree more.

[@richardstetson8221]

I'm a mason in Rhode Island and probably three or four times a year I have to replace flashing or build a chimney and flash it I've been looking for a video like this to learn any tips or tricks to make it easier and could never find one thanks for the video I can't believe it's been up for a year and I could never find it

[@chadvaillancourt]

The KZbin algorithm is ridiculous, you could search the exact title and something else irrelevant would pop up first because it has more views and they have more subscribers. I hope you find the videos helpful.

[@fintan3563]

Can that old lead be recycled? Asking for a friend! 😄😄😄

[@db-humanitys-friend2038]

Very well done great job 👍🇮🇪

[@nobodynobody6216]

Wow, looks beautiful.

[@skills7071]

How do I get you to my house? That is amazing work by someone who takes pride in what they do. I'm serious, How do I contact you?

[@AlphaRoofingPTYLTD]

What gauge lead are you using? We have 20g and 15g here in Australia. From experience I would find it difficult to stretch 20g lead like that...

[@pbysome]

Why do you not replace the shingles before the top flashing?

[@edbarsh4370]

Nice work😄😄😄😄

[@David-e7u3o]

Where the shingles go over the lead stepping, what keeps water from going under the shingle there?

[@overtonegamer]

Nothing, but the shingles are lapped over the next course of shingles, so water would have to go sideways one direction under a shingle, keep traveling sideways out to the edge of the lead it is over, then drop onto the top of the shingle below, turn around, and travel the other direction sideways all the way back to the chimney gap....where it would be met by ice and water shield. Experience in the field and manufacturers who only require 6" of horizontal distance between joints tells us that this scenario is extremely unlikely.

[@erg0centric]

If you don't like the cardboard tubes have you tried a sealant like Dymonic FC in a sausage? My mason introduced it when I was helping him repair a wall ony building. He also taught me to clean and point bricks. BTW I have the same rotary hammer, I think mine is over 30 years old but doesn't get much use.

[@josemourinho8394]

very good job and very neat, how much do you charge in your state for a job like that labor and material?

[@chadvaillancourt]

Thank you. In my area so we have chimney sweeps posing as chimney repair specialist that would charge 1k to paint the outside of the flashing with the flash seal ( basically tar), I’ve even seen companies paint crown coat over the lead for as much. I think for a job like this 2k is a fair price to do a professional job. Obviously prices change based on chimney size, roof pitch, job access, roofing material and other things.

[@josemourinho8394]

@@chadvaillancourt Thank you for answering me, you are very kind $ 2000 is a good price but I am sure that there are companies to do everything you did, they would charge from 3000 to $ 5000 because you know that they have to pay the secretary who is answering the calls to the one who is going to give the estimate to the bricklayer who is going to do the job and the company has to make money too

[@michaelj.k.9408]

@@chadvaillancourt LOL essentially 1k to smear black tar completely over the flashing. Hack jobs man...

[@ElizabethMcIntyre-wc6uz]

Where do you buy the lead flashing?

[@tombbrennan2984]

Would soakers help before flashing

[@denisconor648]

Very impressed great stuff.

[@86aoshi]

What thickness is that lead flashing?

[@xtcguy29]

So chimney flashing done by different people not the roofer? So when you habe a problem who do you call to repair chimney flashing? I though roofer does that kinda job?

[@chadvaillancourt]

The flashing has always been installed by the mason while building the chimney, then the roofer comes later and ties in the roof. Now, the roofers insist on installing new flashing every time a new roof is installed because it's an upsell. That's usually when it starts leaking. They hire the least skilled people and have them go fast. The skill level in roofing is probably at an all-time low. Profits are at an all-time high.

[@ScottieBMan]

Dosnt get better than this, well done sir

[@chadvaillancourt]

Thank you!

[@colinfursman]

Hi it all looks very neat and I am sure you know what you are doing but if the chimney was in the uk it would not solve the problem what you are doing is probably the best that can be done without rebuilding the chimney and installing a lead tray in fact a chimney like the one you are working on would require two lead trays the first 3 courses above the bottom or at the level you have put your cover flashing and the second just above the ridge capping

[@chadvaillancourt]

Thank you for the comment. Flashing trays have never worked here. They work for a bit and then the chimney gets destroyed by excess water storing in the masonry when the deep freeze hits. We have to keep water out.

[@murrayer5426]

Why did you put an apron and a counter flashing on the bottom, but only did one piece of flashing on the sides? Wouldn't it be easier and just as effective to take the counterflashing you put on the bottom and just extend it further down, exactly how you did on the sides? Why the apron?

[@chadvaillancourt]

Most people do this the exact way you suggest, but you cannot get that single piece to bend around and offer enough coverage on the bottom corners, it’s always the weak spot. Also over time that single piece seems more likely to crack in the middle. This is just the way I do it, I’m sure there are many other methods.

[@jeffenoch1871]

Where do you buy lead flashing and is there a brand you recommend?

[@danchristiansen5626]

How much should you charge a customer for a job like this?

[@rockyrowlands3652]

Excellent explanation and I enjoyed your video. I’m not a roofer or a flasher 😅, but I’m an ex paratrooper but do have fear of heights. I must admit I was nervous of seeing you work at height but using no safety scaffolding. You clearly know what your doing but it only takes one mis step or accident….just my thought.

[@chadvaillancourt]

Than you for your service and for your kindness. I would never jump out of a plane, you’re nuts! 😂