Change

*Rear brake pads are not the same process
This is a quick video changing the #front #brake #pads on my #Audi #Q5 3.0 #Supercharged.
Duration: 60 minutes or so depending on skill level
Tools needed:
Floor jack and jack stands
17 mm socket
1/ 2 breaker bar
1/ 2 torque wrench
Ratchet or battery powered ratchet
Small pick tool
4 lbs hammer
Small punch
Make sure to like and subscribe to the channel. Leave your comments below for the group.

[@999akella]

I couldn't find a tutorial to replace my Porsche Macan's brake pads and I found this. They are identically the same. Thank you very much, you saved my money . Thumbs up!

[@512TXSDIY]

Thank you for watching and you’re welcome!!!!

[@timweidner3335]

Nice detail in your video.

[@512TXSDIY]

Thank you for watching! Like/share/subscribe?

[@slackert9x]

Will these pads with for a 2014 q5 2.0t? Great video

[@512TXSDIY]

Good question but I don’t know the answer since that isn’t the model I have. :-/. Anyone else know?

[@512TXSDIY]

Like and subscribe to the channel!

[@tonyzhang8092]

Great video. Is it safe to put the backup jack stand where you have it? Didn't see that jacking point on the owners manual.

[@512TXSDIY]

Thank you. Yes it is safe to put it there as a backup. Nice Speedtimer:-). Please like and subscribe.

[@thomasfarrish8053]

Are the pads and the sensor wires supposed to be exposed like that or am I missing a cover piece? Thanks for the tut by the way! I've already finished the first tire!

[@512TXSDIY]

Mine were exposed like this as I film in real time. Did you get it done?

[@thomasfarrish8053]

@@512TXSDIYI got the front pads done quite easily! I'm doing the rear pads today, which requires a little extra step due to the e-brake, so we'll see how that goes. Thanks so much for the awesome tutorial!

[@Foxwake]

what if I dont have that tool to open the space between the rotor and caliper to put the pads.. what can I do,

[@512TXSDIY]

Better hop on Amazon? :-). You can probably use a big flat blade screw driver as well.

[@chrispantaleon8391]

I used a box wrenc after I got the pads out and wedge it on the caliper. Easiest step in my opinion

[@ap5196]

were your pads semi metallic or ceramic and do you have any squeal after driving on them for a bit?

[@512TXSDIY]

Believe ceramic. Did you need the Amazon link?

[@chrispantaleon8391]

My Audi brakes were squealing from day 1. I tried to have it fixed from the dealership and they refused. I got tired of it and replaced the 3/4 used pads myself. No more squealing

[@Castle_Elizabeth]

I have 2013 audi Q5 premium quattro , do i have to worry about using a device to release my brakes ?? My audi does apply brakes when on brake

[@512TXSDIY]

I don’t understand what you’re saying. Are you talking about the emergency electric brake?

[@Castle_Elizabeth]

@@512TXSDIY sorry Yes its like a hand brake in a way . When i leave my car it automatically applies the brakes. My question is , is the rear brakes only thing being applied or is all 4 front and rear

[@512TXSDIY]

@@Castle_Elizabethwhen the e brake is applied, it only does the rear.

[@Castle_Elizabeth]

@@512TXSDIY okay thank you for your help!

[@512TXSDIY]

You’re welcome

[@marcuswilliams812]

I am sorry but watching this gave me no confidence. Very poor and not worth watching

[@512TXSDIY]

Sorry I couldn’t help you with your confidence. It is an easy DIY and just for educational purposes.

[@djkay1]

Amazing video. Thank youso much 🙏👍🏾