Learn how to replace front brake pads and discs - Audi SQ5

[@mrmegadeth17]

This is an incredible tutorial. Just changing my pads & rotors. This was a god send. Thank you

[@St3rmTig3r]

Very helpful with all the small cleaning tips. Thank you for being so precise and detailed.

[@fuadkrasniqi3236]

You sir... Is a Hero. Thank you. Do you have a video on how to change rear shock absorbers on Audi SQ5 2013?

[@drouxbag94]

Got hardware for caliper off but still stuck and can't pull off caliper. It just wiggles help is appreciated

[@sushi_garage]

Maybe pins are still locked on threads and you need to push them out using screw driver, or you need to press the brake pads to compress pistons a little bit. Use screw driver too

[@drouxbag94]

@@sushi_garage it was the brakes needing to be compressed thank you!

[@JRUSS80]

Clear precise straight to business…..thank you sir

[@nacho1528]

Hello my friend. I have a question, what are the specs for the front brake disc on the SQ5. The diameter in mm and the size in mm, please.

[@antonioalves5401]

380 56mm

[@mikecampbell7421]

You did not show the process for releasing the electronic parking brake ?? Maybe I missed it but normally I need an OBD 11 or VAG software for this part.

[@sushi_garage]

No need to do this. It's front discs and pads replacement video :)

[@mikecampbell7421]

Of course Doh !! That will learn me for trying to be clever 🙂@@sushi_garage

[@couturesworld6134]

Where are you located ???

[@TomSmith-kc8mz]

$2,400 quote from the dealer for this. I almost drove off the road. 😂

[@Deanio_1111]

Yup, just like my 2017 SQ5 Prestiage. Thanks.

[@royrichardson9164]

Where did you get the pads?

[@sushi_garage]

From authorised Audi dealer

[@djtintin]

where on earth do you get an imbus number 9?

[@sushi_garage]

If you can't buy imbus number 9, you can find and buy 3/8 inch. It's around 9,5 mm.

[@tmtoplak222]

3/8 doesn't fit on mine.

[@drouxbag94]

Size 9 hex bit at O'Reilly's

[@Smoothy0911]

Or buy a 10mm and make it yourself to a 9mm key 😉🙂

[@patryniapiotrek643]

Nie odkręciłeś odpowietrznika! Pamiętaj o tym przy cofaniu tłoczków - ewentualny bród wypłynie a nie dostanie się do pompy ABS-u.

[@St3rmTig3r]

what year SQ5?

[@leapers124]

I have 2016 and this exactly how mine is

[@highwayman1769]

Really clear video - Thank You

[@pteamg]

Good job

[@VyasaSewberathMisser]

Why aren’t you using a torque wrench to torque the bolts to the specified torque? Great video otherwise bro !!

[@sushi_garage]

Yea, I know I should tighten every bolt with a specific torque, but sometimes I can't find values in manuals. It's absolutely necessary to use torque wrench when you rebuild engines or other complicated things

[@chrisr4804]

that doesn't seem all that difficult. Great vid.

[@pierrebnh]

Should hit the hat of the rotor to dislodge it, not the rotor itself.

[@amerikanstafford]

++++++++

[@Killian665]

Stupid fake 4 piston calipers

[@sushi_garage]

Yes, but brakes in this Audi works quite good in my opinion...