Change The Look Of Your Car With High Gloss HyperDip™ (Gloss Dip Right Out Of A Can!)

HyperDip™ Aerosol Cans:
Paino Black:
www.dipyourcar.com/collection...
Black Emerald Metallic:
www.dipyourcar.com/collection...
Wheel Kits:
Paino Black:
www.dipyourcar.com/collection...
Emerald Black:
www.dipyourcar.com/collection...
Royalty free music provided by:
Wiljan & Xandra - Woodlands

[@monumentauto]

Looks really good!

[@gregorykozar3795]

Changed my Silver wheels to piano black on my 2022 Chevy Colorado looks incredible

[@Ivan-nq9xj]

Thank you for your video!

[@vetteboi_mj5594]

Thanks needed this video to see how to do emblems!!

[@philipsgarage]

Thanks for watching, I hope your emblems turn out great!

[@TheSmokenBong]

Looks nice af man I would like to see the wheels done

[@david3077]

I just used this hyper dip in piano black it’s not glossy at all it’s like a Matt finish.

[@JaySquaredNY]

Looks fantastic! I’m planning to re-do the wheels on 07 ML63 in this as the DYC obsidian black metallic I used came out more matte. This new paint seems to have the right amount of gloss. Thanks for posting and lookin forward to to see how your wheels come out before I move ahead.

[@philipsgarage]

Thanks Jay! I'm actually in the process of doing the wheels right now I'll try to post up a video of the result in the next few days. I may finish it off more satin for the look of the car. Unfortunately I didn't film during the process. I just added some 25mm spacers on the rear with the stock wheels and it really makes a big difference with the look.

[@JaySquaredNY]

@@philipsgarage looking forward to seeing the results! I only painted the spokes on mine, so the most difficult part was taping the wheel edge. DYC is pretty straightforward and, worst case, can easily wipe off excess and overspray. Ok, back to work lol

[@joesa4717]

Did you ever get the wheels done? Any video on that? Or pictures will do.

[@JaySquaredNY]

@@joesa4717 no never got around to it, and sold the ML63.

[@joesa4717]

@@JaySquaredNY What did you get instead?

[@michelleevans9869]

Like to see the wheel s done as well

[@SWACBUZZ]

I'm going to do my Ford Edge grill.

[@tobymofield6597]

For the love of Peter Paul and Mary... Don't do Black wheels. Impossible to keep them clean!. What good is it to have a clean ride if the wheels stay dirty all the time. I'm gonna soon ditch my black wheels ASAP. Going to go back to polished aluminum. FANTASTIC job on the emblems, Great video.....Good job.

[@philipsgarage]

I actually agree with the comment about black wheels. I recently changed my wheels on my GS from black to silver/polished ones that I ceramic coated. Always looks so clean on them, much easier to keep clean. I guess it was a phase where I wanted black wheels on all of my cars.

[@kenna.9368]

So you think this looks better than the blacked out factory letters? What your opinion on hyperdip vs factory blacked out emblems?

[@shiftyeyesnv8352]

Could have saved some tape with some newspapers but overall it looks good

[@JennyCaldas0506]

I was doing it today. 90 degrees out. I did light coats and went a little heavier after. It has rust looking areas on the letters. Should I use sand paper with water to get it down. Frustrated. Using piano black.

[@bellerive78660]

Nice, I wonder if this would work on a chrome delete - do you think this is a good choice vs wrapping the chrome in black vinyl?

[@philipsgarage]

It would be perfect for the chrome delete. Vinyl wrapping trim can be tricky depending on what it is. It takes less time imo to just spray it with dip, and you can have cleaner edges. It depends on what you are doing, ideally you would remove the trim from the exterior with vinyl wrapping, but you don't need to do that if you dip it. You should mask off with some paper though around the trim you are dipping so you have less cleanup.

[@bellerive78660]

@@philipsgarage thanks Philip!

[@JaySquaredNY]

@@bellerive78660 I actually did both on my E550 Coupe's silver window trim. First I used a black satin vinyl tape (Avery) but still had to trim the excess. That's where my lack of experience and proper cutting tools showed itself lol. So I removed one side, used DYC and found the results were much better. Second side came out even better. As far as time savings, I would say the two processes are about the same. Taping everything before painting takes time. Also the wait time between coats adds time

[@jammin1881]

Nice! How long did you wait between coats?

[@philipsgarage]

10 minutes or so should be fine.

[@Leesadventure]

So it peels off the paint so easy. What stops it coming off the lettering etc?

[@b3nnyb3nny]

I keep running in to “pitting” issues from the application going on too heavy. But if I don’t apply heavy enough the surface has orange peel. Also because the gloss cans have a smaller spray nozzle, yeah easy to have your finger hang too far over the edge, causing the spitting you see on your first light dust coats

[@philipsgarage]

Yeah it can be tricky. Basically what I do is spray it back and forth in a area with the proper distance until I see it start to look wet and then I back off. You might try on a test piece in a small area the technique. After spraying back and forth a area, right after the orange peel look stops showing and turns gloss or wet you can wait to do the next coat. Its definitely a little different from how I've been used to on plastidip.

[@user-kc6xg8ml9l]

Get dipcoat and wipe down the emblems. It helps smooth everything out.

[@naughtysauce4323]

Not as glossy as I expected

[@stevekuebler5101]

I’m considering blacking out my emblems. My biggest concern is how will hold up thru car washes. How has yours held up?

[@philipsgarage]

It will hold up perfectly fine. I've never had any issues with it peeling off as long as you do enough layers. Its very durable.

[@pedrorodrigueziii4859]

I came to your video after watching the DYC channel tutorial and it recommended 6 coats after the dust coats. Is that what you did or did I hear wrong?

[@philipsgarage]

That is correct, I did about that many, I just didn't show every coat on the video since its a little repetitive. Thanks for watching!

[@rodpritchett]

Wish there was something you could use on chrome door handles.

[@philipsgarage]

It should work perfectly fine on chrome door handles. The key is to do very light coats initially and build it up.

[@jmang5089]

I want to do this to my Honda Accord emblems, chrome window trim, front grill, and wheels. Do you have a guess as to how many cans it would take?

[@philipsgarage]

I'd probably say 2-3 for the trim/emblems plus the wheel kit which includes 5 cans. 2 cans may be enough for the trim and emblems but its always better to have some extra while you are doing the project.

[@robinvanderburgh]

I just did my accord coupe, all badges, chrome around windows, front grill, back end, 19” touring rims. Used 6 cans total

[@officialnofriendo]

What is the dry times in between each coat? And how has it held up going thru car wash?

[@philipsgarage]

10-15 minutes should be sufficient

[@officialnofriendo]

@@philipsgarage awesome, thanks

[@douglascampbell8324]

How long does this product hold up and will it peel on car washes.

[@philipsgarage]

It will last several years if applied properly and enough coats. It won't come off in any way in car washes.

[@danisani222]

Why there is this orange skin?

[@bluboysss]

Did you use emerald black or piano black?

[@philipsgarage]

This was using the piano black.

[@igonzalez0]

Does this plastic paint lasts long enough?

[@philipsgarage]

Yes it can last years. I have trim on a car that was dipped several years ago. Thanks for watching!

[@nickspeakstruth133]

How long you waiting in between coats?

[@philipsgarage]

15-20 minutes should be good.

[@jammin1881]

@@philipsgarage Lmao. Ignore my question above!

[@rellohz2755]

Question is it car wash safe after 24 hours of drying ?

[@philipsgarage]

Yes, it drys very quickly

[@rellohz2755]

@@philipsgarage thanks , I was using vinyl wrap spray and the overspray was frustrating and hard to get off. I’m hoping this stuff works better and maybe can remove some of the old vinyl wet wrap to come off of the paint if I cover it with this and then rub it off. Hopefully 😂

[@redciroc1211]

Instead of warming the cans up in warm water why don't you just pop them in the microwave or oven for a few minutes 🤔

[@Leesadventure]

Try the microwave and see how that goes 🤣🤣🤣

[@redciroc1211]

@@Leesadventure 😆

[@witchywedges]

Overspray.

[@pedrorodrigueziii4859]

When I did my car I dang near masked off the entire thing for each section I was dipping. It's really not bad to rub off the overspray though. If you're super concerned you can use a bit of Goo-Gone on a microfiber.

[@ManwantSinghMultani]

Chrome Delete 🤞⚡️

[@Amor1990]

That looks so cheap